Manure Management. Fundamentals of Nutrient Management. June 2, Jarrod O. Miller, Ph.D. Extension Educator, Agriculture

Size: px

Start display at page:

Download "Manure Management. Fundamentals of Nutrient Management. June 2, Jarrod O. Miller, Ph.D. Extension Educator, Agriculture"

Sharleen Gaines
6 years ago
Views:

1 Manure Management Fundamentals of Nutrient Management June 2, 2016 Jarrod O. Miller, Ph.D. Extension Educator, Agriculture

2 Fertilizer Options? Manure Legumes Commercial Fertilizer Bio-Solids

3 Chapter 9: Manure as a Nutrient Source Most of this presentation is from this chapter

4 Benefits of Manure Application Recycles nutrients : Reduces money spent on commercial fertilizer Reduces energy spent creating commercial fertilizer

5 Benefits of Manure Application Improves soil: Organic matter content Cation exchange capacity Water holding Stable structure Lowers bulk density Increases microbe activity

6 Risks of Manure Application Manure may contain: Pathogens Heavy metals Volatile organic compounds (VOC s) Pharmaceuticals/antibiotics Spreading poultry manure (photo by Bob Nichols, USDA-NRCS) Application of manure may cause: Excess nutrients in our ground and surface water Lower air quality Includes smell of ammonia, sulfur, methane Greenhouse gases (N 2 O, methane)

7 Benefits and Risks of Using Manure as a Nutrient Source. Manure and commercial fertilizer can both lose nutrients Speed of loss may be different depending on many factors

8 Production Two Halves of the Manure Equation Application for Crops Spreading poultry manure (photo by Bob Nichols, USDA-NRCS)

Manure Production and Composition (pg 208) Quantity of manure produced Not all animals produce the same amount of manure Age of animal makes a difference Variation

9 Manure Production and Composition (pg 208) Quantity of manure produced Not all animals produce the same amount of manure Age of animal makes a difference Variation in nutrient content Animals are inefficient at processing nutrients 50% of N, P and K can pass through Bedding type and storage can also control nutrient availability

10 Manure production by species The quantity of manure produced varies considerably (pg 208): Among species: because of differences in animal diets and metabolism. Within species: due primarily to differences in management (bedding, feed source).

11 Manure production by species Animal Unit (AU) 1000 lb live weight = 1 animal unit (AU) (e.g. Table 9.1, AU = 1000 lb beef cattle) It s an assumption/average 1 beef cow may weight more/less than 1000 lb 2.67 breeder hogs total 1000 lbs

12 Manure production by species (Table 9.1, pg 209) Animals per AU a Annual manure production per AU Beef cattle Dairy cattle Swine (breeders) Swine (other) Hens (laying) Pullets (over 3 months) lbs tons Pullets (under 3 months) Broilers Turkey (slaughter) a AU = animal unit From Tetra Tech, Inc., 2004.Technical fundamentals of CAFOs for permit writers and inspectors. Tetra Tech, Pasadena, CA.

13 How much manure on a 200 cow dairy? Beef cattle Dairy cattle Column A Animals per AU a lbs Column B Annual manure production per AU ---tons cows 1 AU 0.74 dairy cows 1 AU tons manure Determine units of your answer Write out the variables you know with the units as fractions Answer =Total tons of manure

14 How much manure on a 200 cow dairy? Beef cattle Dairy cattle Broilers Turkey (slaughter) Column A Animals per AU a lbs Column B Annual manure production per AU ---tons tons manure 1 AU dairy 1 AU dairy 0.74 cows 200 cows 4119 Total tons of manure

15 Nutrient Content of Manures (pg 209) Different amounts of N, P and K across species Pay attention to units/storage (ton vs gallon)

16 Nutrient Content of Manures (pg 210) Variation within manure in moisture and nutrient content

17 Nutrient Content of Manures (pg 210) Variation can be due to (pg 210): Diet manipulation (grains, legumes, grasses) Additions of phytase: increases P retention by poultry

18 Land application of manure: Nutrient availability Manure is usually managed to provide the three major plant nutrients: N, P, and K (p 210). Other secondary and micronutrients may be available Ca, S, B, Mg, Mg, Cu, Mo, Fe, Na and Zn Also vary across animal types Because of the variation in nutrients, sampling should be done carefully for each manure source (see pages )

19 Other nutrients in manure (poultry) Typical concentrations of secondary and micro-nutrients in various poultry manures. Secondary and micro-nutrients enhance the value of manure as a balanced nutrient source. Manure Type Ca Mg S Na Fe Mn B Mo Zn Cu Layer lbs/ton Undercage < scraped Highrise stored < Broiler litter lbs/ton Broiler house < Roaster house < Breeder house < Stockpiled < Turkey litter lbs/ton Brooder house < Grower house < Stockpiled < Layer lbs/1000 gallons Liquid slurry Lagoon sludge Layer lbs/acre-inch Lagoon liquid From Zublena, J.P., J.C. Barker, and T.A. Carter Soil facts: Poultry manure as a fertilizer source. North Carolina Extension Service Pub. AG

20 Manure Storage and Handling (pg 213) Storage is necessary since we can t always immediately apply manure. Manure management should consider 1. Production (the yearly/daily amount) 2. Collection (how it is moved handled) 3. Storage (Liquid, solid) 4. Treatment 5. Transfer 6. Utilization (on farm, selling?)

21 Manure Storage and Handling Collection: Understand that some animals are confined under roof, while some may have access to pasture. Poultry House: Collected Pasture: not collected Feedlot: Collected

22 Manure Storage and Handling University of Maryland has excel spreadsheets to calculate production. Includes days/hours confined

23 Storage and Handling May Cause Significant Nutrient Loss Especially Nitrogen

24 Manure Storage and Handling: Nutrient Loss Nutrient loss can occur in any type of storage Its important to understand so we know how much we can apply

25 Nutrient Loss (pg 213) Nutrient content of manure can change during storage Sampling should be done as close to application time as possible Changes can occur due to: dilution, settling or gaseous loss Dilution N 2 Gas NO 3 Settling of solids

26 Table 9.6, pg 214 Most loss is from Nitrogen! Some loss of P and K due to handling Loss due to settling. You can still agitate.

27 Loss of P and K in manure storage P and K lost during storage are relatively low Most losses are due to handling P and K do not become gases They must be lost as liquid or solid runoff, windblown dust, ect Losses of P in lagoons is due to settling of solids (so its still technically there)

28 Nitrogen forms in manure Nitrogen in manures is found in: Organic N: the fraction in dead plant and animal material and is found primarily in amine groups (-NH 2 ) and uric acid. Inorganic N: ammonium (NH 4+ ) nitrate (NO 3- ) The most common form of inorganic N in manure is ammonium.

29 Loss of Nitrogen N losses during storage can range from 15 to 90% Ammonia (NH3) volatilization N 2 Denitrifcation Manure NH 4 + NO 3 - Mineralization Leaching Immobilization (microbes, weeds)

30 Carbon to Nitrogen ratio (C/N) C If the C/N is above 20, Nitrogen can become immobilized N

31 Bedding and C:N ratios Material C:N Ratio Alfalfa Hay 12:1 Rotted Manure 20:1 Straw 75:1 Corn Stalks 80:1 Sawdust 300:1

32 Manure storage and handling: Nutrient loss Part 1 of table for estimating annual nutrient availability after losses from different kinds of storage. Enter total manure nutrients produced (see example) and multiply by the relevant factor for your storage or management system. Factor is the percentage of nutrients retained. Manure Storage/ Treatment System Example: poultry manure on sawdust; per ton Open lot or feedlot Storage (slurry manure, bottom loaded storage) Storage (liquid manure, top loaded storage) Storage (pit beneath slatted floor) N Produced Nitrogen Phosphorus (P 2 O 5 ) Potassium (K 2 O) Factor Available N P Produced Factor Available P K Produced Factor Available K 60 * * * * 0.50 * 0.95 * 0.70 * 0.85 * 1.0 * 1.0 * 0.70 * 1.0 * 1.0 * 0.75 * 1.0 * 1.0

33 Manure storage and handling: Nutrient loss Part 2 of table for estimating annual nutrient availability after losses from different kinds of storage. Manure Storage/ Treatment System Example: poultry manure on sawdust; per ton Poultry manure in pit beneath slatted floor Poultry manure on shavings or sawdust held in house 1-Cell anaerobic treatment lagoon Multi-cell anaerobic treatment lagoon N Produced Nitrogen Phosphorus (P 2 O 5 ) Potassium (K 2 O) Factor Available N P Produced Factor Available P K Produced Factor Available K 60 * * * * 0.85 * 1.0 * 1.0 * 0.50 * 1.0 * 1.0 * 0.20 * 0.35 * 0.65 * 0.10 * 0.35 * 0.65

34 What about Land Application? (pg 216) Nutrient loss during storage: We take a sample to be aware of actual content before applying to crops Spreading poultry manure (photo by Bob Nichols, USDA-NRCS) Availability and loss is also important during application! Nitrogen can be lost from soils just like in storage Most K and P applied is expected to be similar to commercial fertilizer availability

35 Nitrogen forms in manure Organic N (bonded to organic molecule): Manure NHx Inorganic N (MINERAL): ammonium (NH 4+ ) nitrate (NO 3- ) The most common form of inorganic N in manure is ammonium.

36 Availability of N in manure, Table 9.8, pg 218 The inorganic N fraction (approximately 20 to 65% of total N in manure) is considered immediately available to plants. The organic N fraction must be converted to inorganic N (through mineralization) to become plant-available. Mineralization rate of organic N is highly variable and influenced by factors such as temperature, moisture, and C:N ratio of the manure. Manure type Dry poultry Liquid poultry Semi-solid dairy Liquid dairy Semi-solid beef Swine lagoon Mixed swine Organic N Inorganic N (NH 4+ ) % Average percentage of forms of nitrogen in different types of manure From Virginia Department of Conservation and Recreation Nutrient management handbook. 2nd edition. VA DCR, Richmond, VA

37 Mineralization Release of organic N from manure by microbial breakdown Organic Inorganic Manure NHx NH 4

38 Approximate Carbon to Nitrogen Ratios Material C:N Ratio Alfalfa Hay 12:1 Rotted Manure 20:1 Straw 75:1 Corn Stalks 80:1 Sawdust 300:1 Release N Immobilize N

39 Mineralization Rates (% mineralized) How do you calculate the Nitrogen released over time? Pg 218, table 9.9 Animal type Year of application Year after application Second year after application Cattle Layers Horses

40 Mineralization of organic N Questions: What type of manure? Storage? How much organic N does it contain? What is mineralization rate? Multiply organic N by mineralization rate

41 Mineralization of organic N How much N is release from sawdust + poultry (layer) after 0, 1 and 2 years in the soil? Amount of total N in layers (Table 9.2, pg 209): 59 lb/ton Storage factor for poultry and sawdust (Table 9.7, pg 215): 0.50 Amount of organic N in dry poultry (Table 9.8, pg 218): 77% (0.77.) Mineralization rates from previous slide (amount remaining) 0 Yr: = Yr = yr = 0.08

42 Mineralization of organic N How much N is released from sawdust + poultry (layer) after 0, 1 and 2 years in the soil? Year Total N Organic N Storage Factor Mineralization rate N released Manure will provide less Nitrogen over time

43 Determining remaining organic N If test question says you have 20 lb/ton organic N, multiply by mineralization rate. Year Organic N Mineralization rate N released

44 Using a Laboratory Manure Analysis, Calculate the Plant Available Nitrogen (PAN). Calculating plant-available N (PAN) The amount of nitrogen available to crops during the first year following application of manure is referred to as plant-available nitrogen, or PAN. PAN is the sum of: Total inorganic nitrogen (primarily ammonium, or NH 4+ -N) PAN Plant- Available Nitrogen + The percentage of the organic nitrogen that will mineralize during the growing season.

45 Plant Available Nitrogen Release of organic N from manure by microbial breakdown NH 3 Organic Inorganic Manure NHx NH 4

46 N volatilization in manure Volatilization is the loss of N as ammonia gas (NH 3 ). There are two major pathways for this loss in agriculture: Conversion of ammonium-n (NH 4+ -N) to ammonia-nh 3. Conversion of urea (CO(NH 2 ) 2 ) to ammonia-nh 3. Urea is a nitrogen-containing compound that is readily converted to ammonia upon catalysis by the ubiquitous enzyme urease: CO(NH 2 ) 2 + H 2 O + urease 2NH 3 +CO 2

47 Estimating PAN of Manures PAN = available ammonium N + available organic N (N org ) available ammonium N ammonium N x conservation factor NH 4 -N x f con available organic N organic N x mineralization factor N org x f min

48 Estimating PAN of Manures PAN = (NH 4 -N x f con ) + (N org x f min ) mineralization factor (f min ) published average values from research depends upon animal type ammonia conservation factor (f con ) research-based depending upon typical incorporation practices

49 Mineralization Rates (% remaining) How do you calculate the N mineralized over time? Animal type Year of application Year after application Second year after application Cattle Layers Horses

50 Ammonium Conservation Factors for solid manures (<90% moisture) Time to Conventional Conservation incorporation tillage tillage <1 hr No-till or tillage >3 days days days >3 days (no-till).35

51 Estimating PAN of Manures PAN = (NH 4 -N x f con ) + (N org x f min ) Lab test shows cattle manure has 16 lb/ton N org and 12 lb/ton NH 4 -N. Field is under conservation tillage and manure is injected within 6-12 hours (see table for Fcon) PAN = (12 lb/ton * 0.53) + (16 lb/ton * 0.35) = = 12

52 Using a Laboratory Manure Analysis, Calculate the Manure Application Rate Required to Meet a Specified Nutrient Requirement

Spreading Equipment Broadcast Applications of Fertilizer, Manure Lime & Seed Even Distribution of Crop Inputs Accuracy Via: Ground Driven Conveyors Width of Spread Via:

53 Spreading Equipment Broadcast Applications of Fertilizer, Manure Lime & Seed Even Distribution of Crop Inputs Accuracy Via: Ground Driven Conveyors Width of Spread Via: Visual Reference, Compass, Strips, Crop Rows, or Wheel Turning Techniques When should an application of manure or fertilizer be applied? Do I need a Nutrient Management Plan?

If Outcome is Not Desirable to Readjust Machinery May Require Added

54 Calibration & Adjustment Pay Close Attention to the Operators Manual Set Machine for Field Conditions Stop! If Outcome is Not Desirable to Readjust Machinery May Require Added Attachments for Proper Jobbing What is the most important item a farmer should take to the field for equipment adjustment?

55 Calibrating manure application equipment Proper calibration of manure application equipment is a critical part of manure and nutrient management. Manure application equipment can be calibrated in one of three basic ways: The tarp method: Place a tarp flat on the field, spread manure on the tarp, weigh the manure, and calculate the application rate. Repeat measurement at least 3 times. The swath and distance method: Determine the swath width and distance traveled to empty the spreader and calculate the rate based on area covered and the weight of the load. Repeat measurement at least three times. The loads-per-field method: Simply count the number of loads of manure applied and divide by the numbers of acres. For each of the calibration methods, it is critical that all of the controllable variables (i.e., equipment speed, gate settings, type and consistency of manure) remain constant!

Calibrating with the tarp method The tarp method consists of: 1. Placing a tarp (or plastic sheet) on the ground. 2. Using the manure spreader to spread the manure on the tarp. 3.

56 Calibrating with the tarp method The tarp method consists of: 1. Placing a tarp (or plastic sheet) on the ground. 2. Using the manure spreader to spread the manure on the tarp. 3. Weighing the collected manure. 4. Determining the application rate from the weight of the manure collected and the area of the plastic sheet or tarp used. Calibrating a manure spreader using the tarp method (photo by Bob Nichols, USDA-NRCS) This measurement should be repeated at least three times and the results averaged to ensure a consistent application rate.

57 Calibrating with the tarp method Conversion factors to calculate the application rate based on the quantity of manure collected and four common tarp sizes. Pounds (lbs) of waste Tarp dimensions by 6 ft by 8 ft by 10 ft by 12 ft Application rate (T/A) From Mancl, K Land application of waste, spreading and injection. Ohio State University Extension Fact Sheet AEX

Calibrating with the tarp method The rate can also calculated by: Dividing the number of pounds of manure collected by the area (in square feet) of the tarp.

58 Calibrating with the tarp method The rate can also calculated by: Dividing the number of pounds of manure collected by the area (in square feet) of the tarp. The result will be the pounds of manure per square foot. This number can be multiplied by to give the tons per acre. Example: You have an 8 ft by 8 ft tarp and you collect 8.8 lbs of manure on the tarp. The calculation would be: Weighing manure collected with tarp method (photo by Bob Nichols, USDA-NRCS) 8.8 lbs / 64 sq ft (8 ft * 8 ft = 64 sq ft) = lbs/sq ft lbs/sq ft * = 3 tons/acre applied

59 Calibrating with the swath and distance method Calculations for determining application rate for the swath and distance method are similar to those used for the tarp method above. 1. Determine the weight of a load of manure either by direct measurement (i.e., weighing). by converting from volume measurement (many applicators are rated by bushel or cubic foot capacity). 2. Determine the width of the application swath and the distance required to apply the load. From this point, the calculations are identical to those for the tarp method. Example: You have a spreader that holds 7000 lbs of manure (3.5 tons). Your application width is 35 ft and the equipment travels 1200 feet along a field to empty the load. The calculation would be: 7000 lbs / 42,000 sq ft (35 ft * 1200 ft = 42,000 sq ft) = lbs/sq ft lbs/sq ft * = 3.63 tons/acre applied

60 Calibrating with the loads-per-field method The loads-per-field method is the easiest to calculate: 1. Determine the weight in tons of a load of manure. 2. Determine the size of the field in acres. 3. Count the number of loads applied to the field. 4. Multiply that number by the weight in tons of a single load. 5. Divide that number by the acreage of the field. Example: You have a spreader that holds 7000 lbs of manure (3.5 tons). Your field is 55 acres and you apply 35 loads to the field. The calculation would be: 35 loads * 3.5 tons/load = tons tons / 55 acres = 2.23 tons/acre applied

Calibrating with the loads-per-field method Major drawback of the loads-per-field method is that it is an after the fact calculation so that the applicator does not have the opportunity to make

61 Calibrating with the loads-per-field method Major drawback of the loads-per-field method is that it is an after the fact calculation so that the applicator does not have the opportunity to make adjustments in the application rate for the particular field. May best be used as a method of monitoring application rates during the clean-out of a storage facility, using the first two methods described to actually calibrate the spreader before the full scale application of manure begins. Loading manure into spreader (photo by Bob Nichols, USDA-NRCS)

62 Jarrod Miller Extension Educator Thank You! Any Questions?

Manure Management. Fundamentals of Nutrient Management. June 2, R. David Myers Extension Educator, Agriculture

Manure Management. Fundamentals of Nutrient Management. June 2, R. David Myers Extension Educator, Agriculture Manure Management Fundamentals of Nutrient Management June 2, 2010 R. David Myers Extension Educator, Agriculture Fountain of Wealth? Fertilizer Options? Manure Legumes Commercial Fertilizer Bio-Solids