Ag Shield Cross Augers Harvest More Crops FASTER!!!

Transcription

1 Ag Shield Cross Augers Harvest More Crops FASTER!!!

2 25 to 100% Increase in Speed & Productivity vs. No Cross Auger Harvest More Crops FASTER!!!

3 Benefits of Cross Augers Swath More Crops Faster!!! 25% - 100% increase in efficiency depending upon conditions No driving combines around swath piles or beaver houses in swathes Reduced downtime unplugging your combine

4 Cross Augers Pay For Themselves Rates Calculated For Class 7 Combine ( HP) $290 Avg. Per Hour Custom Combine Rate with Draper Header $24/ Acre Avg. Custom Combine Work Rate with Draper Header Cross Auger % Productivity Increase By Hour: Avg. Per Hour Return on Investment Avg. Hours to Recover $5000 Cross Auger Cost 25% $73 69 hrs 50% $ hrs 100% $ hrs Cross Auger % Productivity Increase By Acre: Avg. Per Acre Return on Investment Avg. Acres to Recover $5000 Cross Auger Cost 25% $6 833 Acres 50% $ Acres 100% $ Acres Increase Ground Speed by 50%- Pay for Auger in 34 HR/ 417 Acres Increase Ground Speed by 100% ( 2X) pay for Auger in 17 hours / 200 Acres

5 Ag Shield Augers Carry Crop Right to the Fingers of Center Drum Other Manufacturers Leave a 13 Gap Between Augers and Drum Fingers, Crop Bunches Up Resulting in Slower Feeding, Reduced Grounds Speeds

6 Ag Shield Removable Center Paddles Swept Back 45 Degrees The center paddles unload the crop B at the inner end- Ag Shield exclusive swept back paddle that pushes crop away from auger to the drum fingers. Positive feeding to finger auger Reduces wrapping of green crop material.

7 Paddles Remove to Leave Smooth Pipe Paddle Removed D green NO Paddle Installed C black

8 Ag Shield Augers Start Right at the End Blocks Peas from Overshoot Pulls Lodged Canola from Corners Motor drive end Bearing end. Other Manufacturers start inches from the outer end, peas shoot over the header, and lodged canola stays in the corners.

9 Ag Shield augers start right at the end solve problems before they start Swathing canola or straight cutting standing crop may go over the top of the header, or hang up in the corners either way the auger to both ends is the best solution

10 Stripper Bars Angled for FASTEST Feeding Ag Shield Stripper Bars are at 68 degrees, to DEFLECT crop into auger smoothly. Stripper bars adjustable to cleanly strip the crop away before wrapping. Wrapping eliminated in all crop conditions. Other manufacturer s stripper bars at 90 degree stop material flow.

11 Ag Shield Augers are Positioned Low for Optimal Performance When Swathing Ag Shield augers are typically 12 inches (30cm) above the canvases for maximum crop assist- stop wads from forming. Swath More Crops FASTER!!!

12 Ag Shield Augers are positioned low for optimal performance Shown here in Canola--Ag Shield Augers are typically 12 inches (30cm) above the canvases for maximum crop assist- stop wads from forming.

13 Ag Shield Augers are positioned low for optimal performance With auger grower harvested 100 % of crop at higher speed, --- without auger previous year - cut the tops off peas and left lower 1/3 of crop in the field -

14 Auger Feeding in Thick Peas Lower Auger Keeps Peas Moving to Center BEFORE Wads Form.

15 Cross Auger Harvesting Red Clover Seed Note the crop turning into the center no fluffing up

16 Cross Auger Harvesting Red Clover Seed Augers prevent piles and slugs from forming near center

17 Kits for All Makes and Models AGCO ft Gleaner 600 AGCO ft AGCO 9250 Dynaflex ft Case 1042, 1052, 1062, , ft Case 2162 Flex Case Flex Honey Bee ft JD 900 series 925D -930D-936D ft JD 600 series-630d-635d-640d ft JD600 flex series JD635FD- JD640FD- JD645FD MacDon in ft MacDon D50- D60- FD70 D65- D75 all widths New Holland Midwest brand in Australia AND MORE HEADERS Harvest More Crops FASTER!!!

18 Precision Engineering for Easy Install -Operators manuals where you can read the pictures - simple easy to follow -Usually photos plus 3D CAD drawings for most features

19 Why AG SHIELD? Long Line Manufacturer quality for a LOWER Shortline Price. 32 years of innovative agricultural equipment manufacturing experience. Top quality reputation. A complete cross auger line with several unique features to meet YOUR needs. All products painted epoxy primer and urethane color coat for like new appearance 5+ years after the install. Harvest More Crops FASTER!!!

20 AG SHIELD Mfg. Benito, Manitoba, Canada North America toll free ext 1 Offshore ext 1 More Information at