OFFICIAL LISTING. This is the Official Listing recorded on November 14, 2008.

Transcription

1 OFFICIAL LISTING NSF International Certifies that the products appearing on this Listing conform to the requirements of NSF/ANSI Standard 51 - Food Equipment Materials This is the Official Listing recorded on November 14, MICROBAN PRODUCTS COMPANY VANSTORY DRIVE HUNTERSVILLE, NC Facility: SHENZHEN, CHINA Maximum Temperature Trade Designation Color Type of Food of Use in F Microban Concentrate for Food Zone[1] [3] N N N N [7] N [1] [3] Not tested by NSF for efficacy. Use of this material must be consistent with the EPA approved label - for use in cutting boards, food and condiment storage containers, gaskets, conveyor belts, countertops, ice making equipment, table tops, and trays. Maximum let down ration - 5%. Accepted for for use with ethylene-vinyl acetate copolymers, polyethylene, polypropylene, or rubber articles intended for repeated use. Accepted for use with acrylonitrile/butadiene/styrene copolymer or with acrylonitrile/styrene copolymer only. Accepted for use with polystryrene and rubber-modified polystyrene. [7] Accepted for use with polyethylene or polypropylene. Facility: CHARLOTTE, NC Maximum Temperature Trade Designation Color Type of Food of Use in F Microban Acrylic Concentrates for Food Zone[1] [3] [17] N Beverages < 8% Alcohol Products 1 of 6 150

2 for Food Zone IB20 IB5 Microban Concentrate for Food Zone[1] [3] [20] N Microban Delrin Concentrate for Food Zone[1] [3] [14] N Microban EMAC Resin Concentrate for Food Zone[1] [3] N 1802MP-100N Microban Plasticizer Concentrate for Food Zone[1] [16] Plastic Additive N Microban Polyethylene Concentrates for Food Zone[1] [3] N N Microban Polypropylene Concentrates for Food Zone[1] [3] N N IB N Any 120 ZO N Microban Polystyrene Concentrates for Food Zone[1] [3] N Microban Styrene-Acrylonitrile Concentrates for Food Zone[1] [3] [9] N White Any 450 Any N/A Any 140 [1] Not tested by NSF for efficacy. 2 of 6

3 [3] [7] [8] [9] [13] [14] [16] [17] [20] Maximum let down ratio - 5% Use of this material must be consistent with the EPA approved label - for use in cutting boards, food and condiment storage containers, gaskets, conveyer belts, countertops, ice making equipment, tabletops, and trays. Maximum let down ratio - 2.5% Maximum let down ratio - 3% Maximum let down rato - 2% This material is accecptable for use with the following resin types listed on the EPA approved label: acetate, acrylic, acrylonitrile-butadiene-styrene, epoxy, fluoropolymers, latex, nitrile copolymers, nylon, polychlorophrene, polyester, polyethylene, polypropylene, polystyrene, polyvinylchloride, rayon, rubber (natural and synthetic derivatives), silicone, urethane and vinyl. Accepted for use with polyurethane resins only. Accepted for use with acrylonitrile/styrent copoly-mer only. Accepted for use with polyethylene only. Accepted for use with polypropylene only. Accepted for use with polystyrene and rubber modified polystyrene only. Accepted for use with silicone only. Accepted for use with polyoxymethylene homopolymer only. Accepted for use with Ethylene-methyl acrylate copolymer resin. This material is acceptable for use in: 1) Adhesives complying with 21 CFR ) Surface lubricants used in the manufacture of metallic articles complying with 21 CFR (b). 3) Side seam cements for containers complying with 21 CFR and intended for use in contact with food types AQ-NAC, AQ-AC, AL>8% and AL<8% only. 4) Closures with sealing gaskets complying with and intended for use in contact with food types AQ-NAC, AQ-AC, AL<8%, DY-OW, B-NO and DS only. 5) Rubber articles intended for repeated use complying with 21 CFR , where the total use level of all plasticizers and this ingredient is not to exceed 30% by weight of the rubber product. Accepted for use with acrylic and modified acrylic plastics only. Maximum let down ratio - 10% Maximum let down ratio - 1% Accepted for use with ethylene-vinyl acetate copolymers, polyethylene, polypropylene, or rubber articles intended for repeated use. Facility: HUNTERSVILLE, NC Maximum Temperature Trade Designation Color Type of Food of Use in F Microban Acrylic Concentrates for Food Zone[1] [3] [17] N Beverages < 8% Alcohol Products 150 for Food Zone[1] IB12 Any of 6

4 IB2 IB20 IB5 Microban Concentrate for Food Zone[1] [3] [20] N Microban Delrin Concentrate for Food Zone[1] [3] [14] N Microban EMAC Resin Concentrate for Food Zone[1] [3] N 1802MP-100N N Microban Plasticizer Concentrate for Food Zone[1] [16] Plastic Additive N Microban Plastisol Liquid Formulation for Food Zone[1] [3] Liquid Formulation N Microban Polyethylene Concentrates for Food Zone[1] [3] N N N N Products Microban Polypropylene Concentrates for Food Zone[1] [3] N N 4 of 6 White Any 450 Any N/A Non-

5 N N N IB N ZO N Microban Polystyrene Concentrate for Food Zone[1] [3] N Microban Polyurethane Concentrates for Food Zone[1] [3] [8] N Microban Silicone Paste Formulation for Food Zone[1] [3] [13] N Microban Styrene-Acrylonitrile Conctr. for Food Zone[1] [3] [9] N Microban Talc Concentrates for Food Zone[1] [3] [7] N Any 120 Any 140 [1] [3] [7] [8] [9] [13] [14] Not tested by NSF for efficacy. Maximum let down ratio - 5% Use of this material must be consistent with the EPA approved label - for use in cutting boards, food and condiment storage containers, gaskets, conveyer belts, countertops, ice making equipment, tabletops, and trays. Maximum let down ratio - 2.5% Maximum let down ratio - 3% Maximum let down ratio - 2% This material is accecptable for use with the following resin types listed on the EPA approved label: acetate, acrylic, acrylonitrile-butadiene-styrene, epoxy, fluoropolymers, latex, nitrile copolymers, nylon, polychlorophrene, polyester, polyethylene, polypropylene, polystyrene, polyvinylchloride, rayon, rubber (natural and synthetic derivatives), silicone, urethane and vinyl. Accepted for use with polyurethane resins only. Accepted for use with acrylonitrile/styrent copoly-mer only. Accepted for use with polyethylene only. Accepted for use with polypropylene only. Accepted for use with polystyrene and rubber modified polystyrene only. Accepted for use with silicone only. Accepted for use with polyoxymethylene homopolymer only. Accepted for use with ethylene-methyl acrylate copolymer resin. [16] This material is acceptable for use in: 1) Adhesives complying with 21 CFR ) Surface lubricants used in the manufacture of metallic articles complying with 21 CFR (b). 3) Side seam cements for containers complying with 21 CFR and intended for use in contact with food types AQ-NAC, AQ-AC, AL>8% and AL<8% only. 4) Closures with sealing gaskets complying with and intended for use in contact with food types AQ-NAC, AQ-AC, AL<8%, DY-OW, B-NO and DS only. 5 of 6

6 [17] [20] 5) Rubber articles intended for repeated use complying with 21 CFR , where the total use level of all plasticizers and this ingredient is not to exceed 30% by weight of the rubber product. Accepted for use with acrylic and modified acrylic plastics only. Maximum let down ratio - 10% Maximum let down ratio - 1% Accepted for use with ethylene-vinyl acetate, polyethylene, polypropylene, or rubber articles intended for repeated use. 6 of 6