Disco - LED AMENITIES FIXTURES

Transcription

1 18 Disco Disco - -

2 Disco - 19 AMENITIES FIXTURES

3 20 Disco - -

4 Photometric performance: designed with an optical system capable of controlling the potential glare created by the growing light intensity of s while achieving high photometric performance. This allows the application in street lighting schemes where there is a signifi cant distance between the poles. Disco - Heat sink: the heat dissipation system is specially designed and made to allow the operation of the lights with temperatures ensuring excellent performance/effi ciency and durability. 21 Housing and frame: pressed in die-cast aluminium and designed with a very small surface exposed to wind. Cooling fi ns are integrated into the cover. Optics: Optics made of PMMA with high temperature resistance and UV rays. Flow recovery in V0 polycarbonate, metallized high yield. Pole connection: version with pole connector incorporated directly into the fi xture s housing to enable whiptype installation on poles with diameters /62mm (Glass parallel to the ground with no possibility of tilt). With Acc. 290 it is possible to install the fi xture either in mast-top or whip confi guration. This accessory allows the lamp to be tilted 15 both in the whip-type and mast-top confi guration. Suspension connection: version with connector for suspension installation directly on the housing with acc. 56. Diffuser: extra-clear tempered glass, 4 mm thick, resistant to thermal shocks and impacts (UNI-EN : 2001). Art in plexiglass. Coating: the fi rst stage includes grey epoxy e-coating, resistant to corrosion and saline environments. Then the fi xture is coated with acrylic based UV-stabilised resin. Equipment: Complete with IP67 airtight connector for mains connection (art. 3330, 3331, 3334). Supplied with double insulation switch that cuts off electricity when the cover is opened. Electric gear on a removable tray for easy maintenance. Automatic temperature control inside the device with automatic resetting. Equipped with an air-circulation valve. With dedicated electronic device to protect the module. Energy-saving: the possibility to choose the correct drive current for s will allow you to have the right power under specifi c design conditions, and also help you deal with maintenance and retrofi tting problems. Using a lower current will improve the effi ciency of fi xtures and therefore increase energy savings, whilst a higher current will result in a higher light fl ux so that you can reduce the number of fi xtures. AMENITIES FIXTURES Table for the various options for managing the supply point 1-10V dimming Virtual midnight PLC remote control Adjustment range from 10%-100% with 1-10V Ordered with sub-code -12 Stand alone system with reduction of luminous flux Ordered with sub-code -30 Point-to-point and system management and diagnosis system Ordered with sub-code Wi-Fi remote control (to be agreed upon) Point-to-point and system management and diagnosis system with Wi-Fi system on request 820cm² 3075cm²

5 22 Disco -

6 Disco - 23 AMENITIES FIXTURES IP66IK08 Ø Ø 60 : Power factor >0.9. Luminous flux maintenance 70%: 50000h (L70B20) Disco 5 - central fixing cd/klm CLD CELL (Tj=C) wattage 530mA colour weight code W K - ølm 530mA - CRI s. silver graphite K lm - CRI 80 s. silver graphite K lm - CRI 80 s. silver graphite K lm - CRI 80 On request: possibility for the various options for managing the supply point (see table on p. 21). +40 C -30 On request Elettrical Power n. W ølm lm 350mA lm lm

7 Disco - 24 suspension IP66IK08 L=820cm 2 S=3075cm cd/klm ϒ 3332 Disco 3 - suspension CLD CELL colour weight code s. silver graphite s. silver graphite s. silver graphite (Tj=C) W K - ølm 530mA - CRI K lm - CRI K lm - CRI K lm - CRI 80 Suspension connection: acc On request: possibility for the various options for managing the supply point (see table on p. 21). : Power factor >0.9. Luminous flux maintenance 70%: 50000h (L70B20) wattage 530mA 24 Ø C Made of stainless steel AISI 304. For installation on rope and steel cables ø joint graphite s. silver To be used for installation on poles acc. 1477/ / acc suspension connection acc B _AU_Disco.indd 24 Specify pole height. For poles and accessories, see chapter: Poles 26/01/15 14:32

8 Disco - for pole L=820cm 2 ±15 ±15 60 IP66IK08 S=3075cm 2 25 AMENITIES FIXTURES Pole joint: acc IP66IK08 14 : Power factor >0.9. Luminous flux maintenance 70%: 50000h (L70B20) : Power factor >0.9. Luminous flux maintenance 70%: 50000h (L70B20) Pole joint: acc Disco 1 - residential amenities cd/klm ϒ CLD CELL (Tj=C) wattage 530mA colour weight code W K - ølm 530mA - CRI s. silver graphite K lm - CRI 80 s. silver graphite K lm - CRI 80 s. silver graphite K lm - CRI 80 s. silver graphite K - 22lm - CRI 80 On request: possibility for the various options for managing the supply point (see table on p. 21) Disco 2 - wide beam L=820cm 2 S=3075cm 2 ±15 ± cd/klm CLD CELL (Tj=C) wattage 530mA colour weight code W K - ølm 530mA - CRI s. silver graphite K lm - CRI 80 s. silver graphite K lm - CRI 80 s. silver graphite K - 22lm - CRI 80 On request: possibility for the various options for managing the supply point (see table on p. 21). +40 C C -30