NEWS ISO STANDARDS: 2016/10

Transcription

1 NEWS ISO STANDARDS: 2016/10 ISO/IEC : ISO/IEC Information technology -- Keyboard layouts for text and office systems -- Part 9: Multi-lingual, multiscript keyboard layouts ISO : ISO Gaseous fire-extinguishing systems -- Physical properties and system design -- Part 2: CF3I extinguishant ISO : ISO Gaseous fire-extinguishing systems -- Physical properties and system design -- Part 5: FK extinguishant ISO : ISO Gaseous fire-extinguishing systems -- Physical properties and system design -- Part 6: HCFC Blend A extinguishant ISO : ISO Gaseous fire-extinguishing systems -- Physical properties and system design -- Part 8: HFC 125 extinguishant ISO : ISO Gaseous fire-extinguishing systems -- Physical properties and system design -- Part 9: HFC 227ea extinguishant ISO : ISO Gaseous fire-extinguishing systems -- Physical properties and system design -- Part 10: HFC 23 extinguishant ISO : ISO Gaseous fire-extinguishing systems -- Physical properties and system design -- Part 11: HFC 236fa extinguishant

2 ISO/TR 16196: ISO/TR Nanotechnologies -- Compilation and description of sample preparation and dosing methods for engineered and manufactured nanomaterials ISO/IEC TR 38504: ISO/IEC TR Governance of information technology -- Guidance for principles-based standards in the governance of information technology ISO 16645: ISO Radiological protection -- Medical electron accelerators -- Requirements and recommendations for shielding design and evaluation ISO : ISO Industrial furnaces and associated processing equipment -- Safety -- Part 3: Generation and use of protective and reactive atmosphere gases ISO/IEC : ISO/IEC Information technology -- Security techniques -- Information security for supplier relationships -- Part 4: Guidelines for security of cloud services ISO 17509: ISO Dentistry -- Torque transmitter for handpieces ISO 17679: ISO Tourism and related services -- Wellness spa -- Service requirements ISO 8051: ISO 8051 Long shank taps with nominal diameters from M3 to M10 -- Full-diameter shank taps with recess

3 ISO 17851: ISO Space systems -- Space environment simulation for material tests -- General principles and criteria ISO : ISO Cleanrooms and associated controlled environments -- Part 14: Assessment of suitability for use of equipment by airborne particle concentration ISO : ISO Solar energy -- Collector components and materials -- Part 1: Evacuated tubes -- Durability and performance ISO : ISO Solar energy -- Collector components and materials -- Part 2: Heat-pipes for solar thermal application -- Durability and performance ISO 5366: ISO 5366 Anaesthetic and respiratory equipment -- Tracheostomy tubes and connectors ISO/TR : ISO/TR Safety of machinery -- Relationship with ISO Part 3: Implementation of ergonomic principles in safety standards ISO 18391: ISO Geometrical product specifications (GPS) -- Population specification ISO : ISO Data quality -- Part 100: Master data: Exchange of characteristic data: Overview ISO : ISO Data quality -- Part 120: Master data: Exchange of characteristic data: Provenance

4 ISO : ISO Data quality -- Part 130: Master data: Exchange of characteristic data: Accuracy ISO : ISO Data quality -- Part 140: Master data: Exchange of characteristic data: Completeness ISO 4302: ISO 4302 Cranes -- Wind load assessment ISO : ISO Fluid power systems and components -- Graphical symbols and circuit diagrams -- Part 3: Symbol modules and connected symbols in circuit diagrams ISO : ISO Intelligent transport systems -- Commercial freight -- Automotive visibility in the distribution supply chain -- Part 1: Architecture and data definitions ISO 3677: ISO 3677 Filler metal for soldering and brazing -- Designation ISO 18610: ISO Fine ceramics (advanced ceramics, advanced technical ceramics) -- Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure -- Determination of elastic properties by ultrasonic technique ISO : ISO Robotics -- Performance criteria and related test methods for service robots -- Part 1: Locomotion for wheeled robots ISO : ISO Infusion equipment for medical use -- Part 13: Graduated flow regulators for single use with fluid contact

5 ISO 11469: ISO Plastics -- Generic identification and marking of plastics products ISO 19104: ISO Geographic information -- Terminology ISO 10938: ISO Ophthalmic optics -- Chart displays for visual acuity measurement -- Printed, projected and electronic ISO : ISO Implants for surgery -- Partial and total hip joint prostheses -- Part 12: Deformation test method for acetabular shells ISO 6385: ISO 6385 Ergonomics principles in the design of work systems ISO 19079: ISO Intelligent transport systems -- Communications access for land mobiles (CALM) -- 6LoWPAN networking ISO : ISO Geometrical product specifications (GPS) -- Acceptance and reverification tests for coordinate measuring systems (CMS) -- Part 12: Articulated arm coordinate measurement machines (CMM) ISO 19207: ISO Thermal spraying -- Classification method of adhesive strength by indentation ISO 14224: ISO Petroleum, petrochemical and natural gas industries -- Collection and exchange of reliability and maintenance data for equipment

6 ISO : ISO Cryogenic vessels -- Toughness requirements for materials at cryogenic temperature -- Part 1: Temperatures below -80 degrees C ISO : ISO Rough-terrain trucks -- Safety requirements and verification -- Part 7: Longitudinal load moment systems ISO : ISO Geotechnical investigation and testing -- Testing of geotechnical structures -- Part 10: Testing of piles: rapid load testing ISO 19356: ISO Ships and marine technology -- Marine cranes -- Test specifications and procedures ISO 19365: ISO Passenger cars -- Validation of vehicle dynamic simulation -- Sine with dwell stability control testing ISO 19477: ISO Metallic and other inorganic coatings -- Measurement of Young's modulus of thermal barrier coatings by beam bending ISO 6420: ISO 6420 Hydrometry -- Position fixing equipment for hydrometric boats ISO : ISO Rubber- or plastics-coated fabrics -- Determination of roll characteristics -- Part 1: Methods for determination of length, width and net mass

7 ISO : ISO Rubber- or plastics-coated fabrics -- Determination of roll characteristics -- Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate ISO : ISO Rubber- or plastics-coated fabrics -- Determination of roll characteristics -- Part 3: Method for determination of thickness ISO 12824: ISO Royal jelly -- Specifications ISO 10898: ISO Spot drills ISO 3924: ISO 3924 Petroleum products -- Determination of boiling range distribution -- Gas chromatography method ISO 22472: ISO Ships and marine technology -- Guidelines for the operation and installation of voyage data recorder (VDR) ISO 20054: ISO Plain bearings -- Bearings containing dispersed solid lubricants ISO : ISO Determination of the resistance to cryogenic spillage of insulation materials -- Part 1: Liquid phase ISO : ISO Requirements for sleeping bags -- Part 1: Thermal and dimensional requirements ISO : ISO Requirements for sleeping bags -- Part 2: Fabric and material properties

8 ISO/IEC : ISO/IEC Information technology -- Cloud computing -- Service level agreement (SLA) framework -- Part 1: Overview and concepts ISO :2011/Amd 1: ISO :2011/Amd 1:2016 ISO 27306: ISO Metallic materials -- Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components ISO : ISO Industrial furnaces and associated processing equipment -- Safety -- Part 1: General requirements ISO : ISO Paper, board and pulps -- Measurement of diffuse blue reflectance factor -- Part 1: Indoor daylight conditions (ISO brightness) ISO : ISO Mechanical pencils for technical drawings -- Part 1: Classification, dimensions, performance requirements and testing ISO 2190: ISO 2190 Granulated cork -- Determination of moisture content ISO : ISO Implants for surgery -- Wear of total knee-joint prostheses -- Part 2: Methods of measurement ISO : ISO Plastics -- Differential scanning calorimetry (DSC) -- Part 1: General principles ISO 6235: ISO 6235 Rubber, raw -- Determination of block polystyrene content -- Ozonolysis method

9 ISO 1827: ISO 1827 Rubber, vulcanized or thermoplastic -- Determination of shear modulus and adhesion to rigid plates -- Quadruple-shear methods ISO : ISO Plain bearings -- Hydrostatic plain journal bearings with drainage grooves under steady-state conditions -- Part 1: Calculation of oil-lubricated plain journal bearings with drainage grooves ISO : ISO Plain bearings -- Hydrodynamic plain thrust pad bearings under steady-state conditions -- Part 2: Functions for the calculation of thrust pad bearings ISO/TS 19700: ISO/TS Controlled equivalence ratio method for the determination of hazardous components of fire effluents -- Steady-state tube furnace ISO : ISO Implants for surgery -- Wear of total hip-joint prostheses -- Part 2: Methods of measurement ISO/IEEE :2014/Cor 1: ISO/IEEE :2014/Cor 1:2016 ISO 1144: ISO 1144 Textiles -- Universal system for designating linear density (Tex System) ISO 11381: ISO Ophthalmic optics -- Spectacle frames -- Screw threads ISO 10815: ISO Mechanical vibration -- Measurement of vibration generated internally in railway tunnels by the passage of trains

10 ISO/IEC TR : ISO/IEC TR Information technology -- Information technology sustainability -- Energy efficient computing models -- Part 1: Guidelines for energy effectiveness evaluation ISO 17973: ISO Surface chemical analysis -- Medium-resolution Auger electron spectrometers -- Calibration of energy scales for elemental analysis ISO 15471: ISO Surface chemical analysis -- Auger electron spectroscopy -- Description of selected instrumental performance parameters