Transcription

1

2 Catalog Number FEATURES & SPECIFICATIONS INTENDED USE Our recessed LED module is the most economical means to create a well lit environment with exceptional energy efficiency and near zero maintenance. Great for retrofit into existing downlight cans or new construction and remodel applications. Adjustable torsion spring and retention allows fitment into many " and " cans. The LED module maintains at least % light output for, hours. Indoor and Outdoor Use. CONSTRUCTION Aluminum spun reflector with deep baffle configuration for reduced glare. Combined LED and driver printed circuit board attached. Inner reflector cone funnels light through the pressed-in diffused lens. OPTICS Diffused lens at end of mixing chamber to provide even light distribution for general illumination, equivalent to W BR lamp. Wide flood beam angle at >. ELECTRICAL Edge (patent pending) technology created for a single point source. Primary power disconnect provided for simple connection to a dedicated LED connector in the housing. Dimming down to %. For compatible dimmers, please refer to the charts below. L-lumen E series has an input wattage of. watts, lumens per watt, equivalent to -watt incandescent. E Series patent pending driver has zero inrush, which allows power loads to be calculated with actual rated wattages. Example: units of BEMW LED fixtures can be installed in line with a -watt dimmer. W/.W = fixtures. INSTALLATION Suitable for installation in standard and shallow-height rough-in sections. E socket adapter ships standard. Twin torsion springs ensure easy installation for " and " recessed housings. LISTINGS CSA certified to US and Canadian safety standards. ENERGY STAR qualified. Wet location listed. WSEC ASTM E for Air-Tight (with IC housings). WARRANTY -year limited warranty. Complete warranty terms located at: NOTE: Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at C. Specifications subject to change without notice. E adaptor (included) Specifications DIMMABLE Aperture: -/ (.) PATENTS PENDING. Ceiling opening: Determined by rough-in -/ (.) Overlap trim: -/ (.) -/ : -/ (.) (.) Notes Type All dimensions are inches (centimeters) unless otherwise indicated. LED Recessed Downlighting BE " / " LED Module IC/Non-IC Retrofit -/ (.) ORDERING INFORMATION For shortest lead times, configure product using bolded options. Example: BEMW LED K LXLED T Series/Finish Lamp CCT / CRI / W / Lumens Voltage Housing options BEMW " / " Baffle LED module, matte white LED HL LED K K K K K CRI K CRI K CRI K K K K/ CRI /.W / L K/ CRI /.W / L K /CRI/.W/L K/CRI/.W/L K / CRI /.W / L K / CRI /.W/L K / CRI /.W/L K/CRI/.W/L K/CRI/.W/L K/CRI/.W/L (blank) V LXLED T " new construction rough-in LED base LXRLED T " remodel rough-in LED base LCLED T " new construction rough-in LED base LX " new construction rough-in LXR " remodel rough-in LXP " new construction shallow rough-in LXPR " remodel shallow rough-in LC " new construction rough-in LCP " new construction shallow rough-in LLED T " new construction rough-in LED base LRLED T " remodel rough-in LED base L " new construction rough-in LR " new construction rough-in Accessories: order as separate catalog number TSA " torsion spring adaptor Notes Total system delivered lumens. Must be ordered on a separate line. DOWNLIGHTING BE LED

3 "/" LED Module LOW LUMEN PHOTOMETRICS Distribution Curve Distribution Data Output Data Coefficient of Utilization Illuminance Data at " Above Floor for a Single Luminaire BEMW LED, K, input watts:., delivered lumens:, LM/W =, test no. LTL, tested in accordance with IESNA LM * % pc % % % pw % %% % % % % %%..... % beam -. % beam BEMW LED, K, input watts:., delivered lumens:, LM/W =, test no. LTL, tested in accordance with IESNA LM * % pc % % % pw % %% % % % % %%..... % beam -. % beam BEMW LED, K, input watts:., delivered lumens:, LM/W =, test no. LTL, tested in accordance with IESNA LM * % pc % % % pw % %% % % % % %%..... % beam -. % beam BEMW LED, K, input watts:., delivered lumens:, LM/W =., test no. ISF, tested in accordance with IESNA LM - CP Summary % pc % % % pw %%% %%% %%% Zonal Lumen Summary % Fixture BE LED DOWNLIGHTING: One Lithonia Way Conyers, GA Phone: -- Fax: Acuity Brands Lighting, Inc. All rights reserved. Rev. //

4 "/" LED Module LOW LUMEN BEMW LED, K, CRI input watts:., delivered lumens:, LM/W =, test no. LTLP, tested in accordance with IESNA LM * % pc % % % pw % %% % % % % %%..... % beam -. % beam BEMW LED, K, CRI input watts:., delivered lumens:, LM/W =., test no. LTLP, tested in accordance with IESNA LM * % pc % % % pw % %% % % % % %%..... % beam -. % beam BEMW LED, K, CRI input watts:., delivered lumens:, LM/W =., test no. ISF S, tested in accordance with IESNA LM * % pc % % % pw % % % % % % % % %..... % beam -. % beam BE LED DOWNLIGHTING: One Lithonia Way Conyers, GA Phone: -- Fax: Acuity Brands Lighting, Inc. All rights reserved. Rev. //

5 "/" LED Module LOW LUMEN ADDITIONAL DATA BEMW LED K CRI - CRI - Lumens L L - C ( F) C ( F) FCC Title CFR, Part, Class B V Min. power factor. / Hz Rated wattage.w.w Input power.w.w Input current.a ADDITIONAL DATA BEMW LED K CRI - CRI - Lumens L L - C ( F) C ( F) FCC Title CFR, Part, Class B V Min. power factor. / Hz Rated wattage.w.w Input power.w.w Input current.a ADDITIONAL DATA BEMW LED K CRI - CRI - Lumens L L - C ( F) C ( F) FCC Title CFR, Part, Class B V Min. power factor. / Hz Rated wattage.w.w Input power.w.w Input current.a.a ADDITIONAL DATA BEMW LED K CRI - Lumens L - C ( F) C ( F) FCC Title CFR, Part, Class B V Min. power factor. / Hz Rated wattage.w Input power.w Input current.a BE LED DOWNLIGHTING: One Lithonia Way Conyers, GA Phone: -- Fax: Acuity Brands Lighting, Inc. All rights reserved. Rev. //

6 "/" LED Module LOW LUMEN LIGHTING FACTS DIMMER LIST ESERIES Low Lumen Lutron AYCL-P CTCL-P DVCL-P Leviton -P Pass & Seymour HCLPTCCCV Synergy ISD I * *Must have minimum of qty LED modules on a circuit to function. BE LED DOWNLIGHTING: One Lithonia Way Conyers, GA Phone: -- Fax: Acuity Brands Lighting, Inc. All rights reserved. Rev. //

7 "/" LED Module LOW LUMEN PHOTOMETRICS Distribution Curve Distribution Data Output Data Coefficient of Utilization Illuminance Data at " Above Floor for a Single Luminaire BEMW HL LED, K, input watts:., delivered lumens:, LM/W =., test no. ISF, tested in accordance with IESNA LM - CP Summary % pc % % % pw %%% %%% %%% Zonal Lumen Summary % Fixture BEMW HL LED, K, input watts:., delivered lumens:, LM/W =., test no. ISF, tested in accordance with IESNA LM - CP Summary % pc % % % pw %%% %%% %%% Zonal Lumen Summary % Fixture BEMW HL LED, K, input watts:., delivered lumens:, LM/W =., test no. ISF, tested in accordance with IESNA LM - CP Summary % pc % % % pw %%% %%% %%% Zonal Lumen Summary % Fixture BE LED DOWNLIGHTING: One Lithonia Way Conyers, GA Phone: -- Fax: Acuity Brands Lighting, Inc. All rights reserved. Rev. //

8 "/" LED Module LOW LUMEN ADDITIONAL DATA BEMW HL LED K ADDITIONAL DATA BEMW HL LED K ADDITIONAL DATA BEMW HL LED K CRI - CRI - Lumens - C ( F) Max temp C ( F) FCC Title CFR, Part, Class B Sound Rating V Min. power factor. /Hz Rated wattage.w Input power.w Input current.a CRI - Lumens - C ( F) C ( F) FCC Title CFR, Part, Class B V Min. power factor. /Hz Rated wattage.w Input power.w Input current.a Lumens - C ( F) C ( F) FCC Title CFR, Part, Class B V Min. power factor. /Hz Rated wattage.w Input power.w Input current.a LIGHTING FACTS DIMMER LIST ESERIES High Lumen Lutron DV-P-LA CT-PR-WH DVELV-P P SELV DV-P NTELV-P Leviton -PA -P Insteon D Pass & Seymour LS PWV HPNICCV Synergy/Leviton ISD I / IPI ISD ELV / IPE Cooper DLCP-W Devine Sensorswitch nsp PCD W nsp PCD ELV BE LED DOWNLIGHTING: One Lithonia Way Conyers, GA Phone: -- Fax: Acuity Brands Lighting, Inc. All rights reserved. Rev. //