PRETEST. Technical Report: (9317) Page 1 of 5 December 12, 2017

Transcription

1 PRETEST Technical Report: (9317) Page 1 of 5 December 12, 2017 Bureau Veritas Consumer Products Services (Guangzhou) Co., Ltd No. 183, Shinan Road, Meilin Plaza, Dongchong, Nansha, Guangzhou, Guangdong Province, China Tel: (86) Fax: (86) BVCPS_pyinfo@cn.bureauveritas.com Website: This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute you unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents.

2 PRETEST ATTN: FUJIAN CASHION GARMENT CO LTD LAB NO.: (9317) FORM NO.: / DATE IN: DEC 06, 2017 MODIFIED DATE IN: / DATE OUT: DEC 12, 2017 CC: GRACE JIANG DIVISION: / DEPARTMENT: / NO. OF WORKING DAYS: 5 PAGE: PAGE 2 OF 5 OVERALL RATING PASS FAIL DATA Sample Description: NYLON / PU COATING FABRIC AND RAIN JACKET Vendor: FUJIAN CASHION GARMENT CO., LTD Manufacturer/Factory: HEIAN GARMENT FACTORY Season: SP ACAD PO #: , , Color: PINK ACAD SKU # (Item#): / / Fabric Weight: / ACAD Style # (VPN) : YFSMGCE3030 Country of Origin: CHINA Product End Use YOUTH (Youth or Adult) : Size: / Size Range: S-L URN # for bedding (all filled products) Only: / Finish: / Product Category: GARMENT Re-test: Yes: No: Test Requested: Previous Report No.: Submitted Fiber Content: 100% NYLON Actual Fiber Content: / Suggested Fiber Content: / Submitted Care Instructions MACHINE WASH COLD, COOL IRON, NONE BLEACH, DO NOT DRY CLEAN, PERMANENT PRESS, TUMBLE DRY LOW. Suggested Care / Instructions

3 Page 3 of 5 TEST PROPERTY PASS FAIL DATA COMMENTS CPSIA TOTAL LEAD CONTENT IN SUBSTRATES MATERIALS CPSIA TOTAL LEAD IN SURFACE COATING FLAMMABILITY OF CLOTHING NA & SEE RESTULT TETILES WATER RESISTANCE: HYDROSTATIC PRESSURE TEST TECHNICAL QUESTIONS Parker u (86) Parker.u@cn.bureauveritas.com SIGNATURES Bureau Veritas Consumer Products Services (Guangzhou) Co., Ltd GENERAL INFORMATION Eva Luk (86) Eva.Luk@cn.bureauveritas.com Parker u Toy Lab Manager

4 Page 4 of 5 TEST PROPERTY TEST RESULTS REQUIREMENTS WATER RESISTANCE: HYDROSTATIC PRESSURE TEST (AATCC 127) ORIGINAL AFTER WASH (mm H 2 O) >2000 >2000 MIN 2000 (mm H 2 O) CPSIA TOTAL LEAD CONTENT IN SUBSTRATES (CPSC-CH-E / CPSC-CH-E ) A2 SILVERY METAL WITHOUT COATING (ZIPPER pull-tab) (ppm) 16.8 MA ppm A3 SILVERY METAL WITHOUT COATING (ZIPPER SLIDER) (ppm) 19.7 MA ppm A4+A5+A6 GREEN PLASTIC (ZIPPER TOP STOP/ ZIPPER BOTTOM STOP) + GREEN PLASTIC (ZIPPER TEETH) + TRANSPARENT GLUE WITH BASE FABRIC (STRENGTHENED TAPE) (ppm) <10 MA ppm A7+A8 TRANSPARENT PLASTIC WITH BASE FABRIC (BODY) + TRANSPARENT PLASTIC (ON LINING BINDING) (ppm) <10 MA ppm CPSIA TOTAL LEAD IN SURFACE COATING (CPSC-CH-E ) A1 GREEN COATING (ON ZIPPER HEAD) (ppm) <10 MA ppm A9+A10 WHITE COATING (ON POCKET LINING) + WHITE/ BLACK COATING (ON LABEL OF POCKET LINING) (ppm) <10 MA ppm

5 Page 5 of 5 TEST PROPERTY TEST RESULTS REQUIREMENTS FLAMMABILITY OF CLOTHING TETILES(16 CFR 1610) CLASSIFICATION IF SAMPLE FALLS UNDER SPECIFIC EEMPTIONS AS LISTED BELOW, THE REPORT SHOULD BE RATED AS A PASS AND THE SPECIFIC EEMPTION SHOULD BE NOTED IN THE REPORT. EEMPT DUE TO FIBER CONTENT: NYLON THE SUBMITTED SAMPLE(S) IS(ARE) EEMPT FROM FLAMMABILITY TESTING IN ACCORDANCE WITH 16 CFR (D) WHICH STATES: SPECIFIC EEMPTIONS EPERIENCE GAINED FROM YEARS OF TESTING IN ACCORDANCE WITH THE STANDARD DEMONSTRATES THAT CERTAIN FABRICS CONSISTENTLY YIELD ACCEPTABLE RESULTS WHEN TESTED IN ACCORDANCE WITH THE STANDARD. THEREFORE, PERSONS AND FIRMS ISSUING AN INITIAL GUARANTY OF ANY OF THE FOLLOWING TYPES OF FABRICS, OR OF PRODUCTS MADE ENTIRELY FROM ONE OR MORE OF THESE FABRICS ARE EEMPT FROM ANY REQUIREMENT FOR TESTING TO SUPPORT GUARANTIES OF THOSE FABRICS. 1. PLAIN SURFACE FABRICS, REGARDLESS OF FIBER CONTENT, WEIGHING 2.6 OUNCES PER SQUARE YARD OR MORE; AND 2. ALL FABRICS, BOTH PLAIN SURFACE AND RAISED-FIBER SURFACE, REGARDLESS OF WEIGHT, MADE ENTIRELY FROM ANY OF THE FOLLOWING FIBERS OR ENTIRELY FROM COMBINATION OF THE FOLLOWING FIBERS: ACRYLIC, MODACRYLIC, NYLON, OLEFIN, POLYESTER, WOOL. CLASS 1 *** END ***