8 Garda - LED 01A LED_AU_Garda.indd 8 19/06/17 11:09

Transcription

1 8 Garda - LED

2 Garda - LED 9 AMENITIES FIXTURES

3 Garda - LED

4 11 LED Housing and arms: pressed in diecast aluminium and designed with a very small surface exposed to wind. AMENITIES FIXTURES Garda - Optics: Optics made of PMMA with high temperature resistance and UV rays. Pole connection: pressed in diecast aluminium. Suited for poles with a diameter 60-76mm. Diffuser: extra-clear tempered glass, 4 mm thick, resistant to thermal shocks and impacts (UNI-EN 12-1: 2001). Coating: In different stages. Grey epoxy cationic electrocoating, resistant to corrosive and saline environments. UV stabilized priming using anthracite acrylic resin. : with surface coating resistant to acetic acid salt spray tests pursuant to standard UNI EN ISO 9227 Corrosion Tests in Artificial Atmosphere. UNI EN ISO Garda 1 - wide beam 40 cd/klm cd/klm 00 cd/klm 1 3 Garda - wide beam ϒ cd/klm Garda 3 - cycleways 0 31 Garda 2 - asymmetric 33 Garda 4 - cycleways + residential amenities cd/klm 16 Energy-saving: the possibility to choose the correct drive current for LEDs will allow you to have the right power under specific design conditions, and also help you deal with maintenance and retrofitting problems. Using a lower current will improve the efficiency of fixtures and therefore increase energy savings, whilst a higher current will result in a higher light flux so that you can reduce the number of fixtures Equipment: nylon wiring plate 30% fibre glass complete with connector for mains connection and for LED module. Automatic temperature control inside the device with automatic resetting. With dedicated electronic device to protect the LED module. Equipped with an air-circulation valve ϒ Low Flicker: product with a very low flicker; uniform light for greater eye protection. Specify pole height. For poles and accessories, see chapter: Poles Table for the various options for managing the supply point 1-V dimming Adjustment range from %-0% with 1-V Ordered with sub-code A LED_AU_Garda.indd 11 Virtual midnight Stand alone system with reduction of luminous flux and surge protector 6/ KV Ordered with sub-code PLC remote control Wi-Fi remote control (to be agreed upon) Point-to-point and system management and diagnosis system Point-to-point and system management and diagnosis system with Wi-Fi system Ordered with sub-code on request 19/06/17 11:

5 12 Garda - LED acc. 9 anti-glare shield anthracite To prevent glare effects. To be fitted when Garda is installed near a window. EN EC Ø cd/klm 16 LED 31 Garda 2 - asymmetric LED (Tj= C) LED anthracite lm - CRI LED anthracite lm - CRI 70 LED anthracite lm - CRI LED anthracite lm - CRI 70 : possibility to control each individual light point (see table on p. 11). Power supply n.led W K ølm 30mA 4030lm lm 32 LED 30mA 3830lm lm

6 EN EC Garda - LED 13 AMENITIES FIXTURES Ø cd/klm ϒ LED 16 LED 32 Garda 3 - cycleways LED (Tj= C) LED anthracite lm - CRI LED anthracite lm - CRI 70 LED anthracite lm - CRI LED anthracite lm - CRI 70 : possibility to control each individual light point (see table on p. 11). Power supply n.led W K ølm 30mA lm 4030lm 30mA lm 3830lm EN EC Ø cd/klm ϒ LED 32 LED 33 Garda 4 - cycleways + residential amenities LED (Tj= C) LED anthracite lm - CRI LED anthracite lm - CRI 70 LED anthracite lm - CRI LED anthracite lm - CRI 70 : possibility to control each individual light point (see table on p. 11). Power supply n.led W K ølm 30mA 4030lm lm 30mA 3830lm lm

7 14 Garda - LED

8 EN EC Garda - LED 1 AMENITIES FIXTURES Ø cd/klm 16 LED 32 LED 30 Garda 1 - wide beam LED (Tj= C) LED anthracite lm - CRI LED anthracite lm - CRI 70 LED anthracite lm - CRI LED anthracite lm - CRI 70 : possibility to control each individual light point (see table on p. 11). Power supply n.led W K ølm 4030lm 30mA lm 30mA 3830lm lm EN EC Ø cd/klm 24 LED 3 Garda - wide beam LED (Tj= C) LED anthracite lm - CRI LED anthracite lm - CRI 70 : possibility to control each individual light point (see table on p. 11).