GURIT PRODUCT CATALOGUE

Transcription

1 GURIT PRODUCT CATALOGUE Australia, New Zealand and South-East Asia Version 30 - November 2018 info-nz@gurit.com info-au@gurit.com

2 Cover photo credits: Tim Wright, Danish Yachts

3 Introduction to Gurit Gurit is renowned as one of the leading global manufacturers and suppliers of composite materials and engineering. Gurit's unique approach integrates structural design, materials science and process engineering to offer a complete turnkey composite solution. Gurit offers a combination of innovative, durable, industry-leading composite products with unrivalled in-house technical expertise, ensuring best-in-class operation wherever it is applied. The versatility and durability of Gurit's products and in-depth engineering knowledge means every project delivers a performance that is finely tuned to individual specifications and needs. Gurit's long history of development and innovation has increased part quality and durability while continual streamlining of processes have improved productivity and reduced costs. Gurit offers an impressive portfolio of standardised and customised products suitable for a full range of requirements, including a comprehensive range of tooling, reinforcement and prepreg materials. Gurit's patent-approved, award-winning SPRINT technology offers lightweight, cost-effective solutions for a number of applications, reducing production time and cost by up to 60%, and weight by up to 40%. Gurit Corecell is a leading structural foam core material, which has become widely accepted for the construction of large, high performance structures. How to use this Product Catalogue This catalogue has been produced to provide information on our product portfolio. Each individual product code is categorised as one of the following: AU/NZ AU NZ SPECIALIST = stocked product in Australia and New Zealand = stocked in Australia only = stocked in New Zealand only = please contact your local customer support team for product availability Gurit is also well served by a network of representatives, who hold stocks of Gurit products locally, and who can also act as a local point of contact for technical and sales information. A list of these representatives is given at the end of this publication. Brief descriptions of each product and product group are given throughout to facilitate product selection, with full information on any product obtainable from the relevant technical datasheet. These are available on the Gurit website, or by contacting customer support. Contact details for customer support are given at the end of this publication. The product catalogue structure is given in the contents page. For placing orders, contact details can be found at the end of this product catalogue. Written orders may be provided by fax, letter or . Please use the order codes provided to ensure that you obtain the correct products. Some Gurit products are subject to export control restrictions and destinations subject to trade restrictions. Please contact your local Gurit Customer Support office for details. Gurit SEA / NZ / AU Product Catalogue 2 GPC_AUNZSEA_30_1118

4 Contents Prepreg & SPRINT Materials... 4 Fibre Definitions of HEC, IMC, HMC and UHMC... 4 Low Temperature Curing Prepreg & SPRINT Materials... 6 Performance Prepreg & SPRINT Materials... 8 High Performance Prepreg Materials Aerospace Qualified Prepreg Materials Industrial Prepreg & SPRINT Materials Prepreg & SPRINT Ancillaries Fire Retardant Materials Fire Retardant Laminating Systems Fire Retardant SPRINT Systems Fire Retardant Prepreg Systems Core Materials Introduction Forms of Supply Core Materials Range Nomex Honeycomb B³ Smartpac from Gurit Adhesive Systems Spabond Adhesives Smartfuse Adhesives Liquid & Filled Systems Laminating Systems Infusion Systems RTM System Multi-Purpose Systems Code Selector Filling and Fairing Tooling Products Coatings Reinforcements Ancillary Products Vacuum Consumables Gurit Structural Engineering Gurit Mechanical Testing Contact Gurit SEA / NZ / AU Product Catalogue 3 GPC_AUNZSEA_30_1118

5 Prepreg & SPRINT Materials Gurit s long history supplying out of autoclave prepregs to the wind energy & marine industries has allowed Gurit to lead the way by introducing the next generation of prepregs, specifically designed to make large composite component manufacture faster, easier and cheaper. Prepreg Materials Pre-impregnated materials (prepregs) are reinforcement fibres or fabrics into which a precatalysed resin system has been impregnated by a machine. The resin systems in these materials react very slowly at room temperature, giving rise to working times of many days or months. Prepreg resins can only be fully cured by heating them to the prescribed cure temperature. The accuracy of the machinery used to combine the fabric or fibre with the resin ensures that laminates produced from prepregs have more consistent and higher fibre contents than can be achieved by wet lay-up techniques. This allows the use of very tough, strong resin systems that would be too high in viscosity to be impregnated by hand. SPRINT Materials SPRINT materials consist of a layer of fibre reinforcement either side of a pre-cast, precatalysed resin film with a very lightweight tack film on one face. The material therefore has the appearance of dry reinforcement, which has resin concealed at its centre. SPRINT materials are produced by a process that differs from conventional prepreg so that the fibres in the reinforcements remain dry and un-impregnated by the resin. SPRINT materials are laid up in a mould and vacuum bagged as for conventional prepreg. However, when the vacuum is applied, the air transport properties of the dry reinforcement enable air trapped in the fibre bundles and between layers to be easily removed. When the temperature is then raised for the cure, the resin film softens and flows into the air-free reinforcement. The void content of the resultant laminate is extremely low (typically 0-0.5%). Fibre Definitions of HEC, IMC, HMC and UHMC... 4 Low Temperature Curing Prepreg & SPRINT Materials... 6 Performance Prepreg & SPRINT Materials... 8 High Performance Prepreg Materials Aerospace Qualified Prepreg Materials Industrial Prepreg & SPRINT Materials Prepreg & SPRINT Ancillaries Gurit SEA / NZ / AU Product Catalogue 4 GPC_AUNZSEA_30_1118

6 Fibre Definitions of HEC, IMC, HMC and UHMC Fibre Description Strength (MPa) Modulus (GPa) HEC High Elongation Carbon > to 257 IMC Intermediate Modulus Carbon > to 310 HMC High Modulus Carbon > to 405 UHMC Ultra High Modulus Carbon > to 455 Bespoke products are available for high-volume custom applications, where specific variants of width, resin content, fibre weight, tack levels and backers can be requested. For specific enquiries please contact your local customer support representative. Gurit prepreg product formats are described as one of the following: 1PA single release paper applied to one side only 1PO single poly backer applied to one side only POPA one poly backer and one paper applied to either side 2DPE two poly backers applied to each side S/S single sided SPRINT product /XXXX the 2 nd reinforcement used in a double sided SPRINT e.g. /XC305 /CM manufactured for cosmetic applications Gurit SEA / NZ / AU Product Catalogue 5 GPC_AUNZSEA_30_1118

7 Low Temperature Curing Prepreg & SPRINT Materials Gurit s range of low temperature curing prepregs have been developed to allow for the use of cost-effective tooling solutions in the construction of large components. Product Selector Format System Main Features Fastest Cure Recommended Processing Method Max Tg 1 Typical Applications Prepreg SE 70 Curable at 70 C in thick sections Available in SPRINT and prepreg formats SPRINT ST 70 Range of compatible 70 C curing products 25 mins at 120 C Autoclave Press Moulding Vacuum Bagging 126 C Sandwich structures with honeycomb, foam and balsa cores SE 70 SE 70 is a family of hot melt, low temperature (70ºC) cure, epoxy prepreg systems. They have been developed for use in the construction of large components using low energy cure cycles, and have an out-life of 28 days at 21 C. Excellent properties can be achieved at this cure temperature, particularly compressive and interlaminar shear strengths. ST 70 This is a low temperature (70ºC) cure, SPRINT system. Developed for use in the construction of large components using low energy cure cycles, it has an out-life of 21 days at 21 C. Excellent properties can be achieved at this cure temperature, particularly compressive and interlaminar shear strengths. ST 70 is DNV-GL approved for some glass and carbon products. Please contact your customer support representative for more information. Gurit SEA / NZ / AU Product Catalogue 6 GPC- APAC

8 Code Selector Low Temperature Curing Prepreg SE 70 Reinf. Wt (gsm) Width (mm) Resin Content (%) Format Length (lm) Quantity (m 2 ) (m 2 ) Order Code Unidirectional High Elongation Carbon (HEC) HEC DPE PP NZ HEC POPA PP SPECIALIST HEC DPE PP NZ Unidirectional High Modulus Carbon (HMC) HMC POPA PP SPECIALIST Woven High Elongation Carbon (HEC) RC200T PO PP SPECIALIST RC200T DPE PP NZ RC303T PO PP SPECIALIST RC416T PO PP SPECIALIST RC660T DPE PP SPECIALIST Stitched Multi-axial High Elongation Carbon (HEC) XC DPE PP NZ Stitched Multi-axial E-Glass QE PO PP SPECIALIST Peel Ply NPP PA PP SPECIALIST Resin Film SE 70 Film No Carrier PP SPECIALIST Low Temperature Curing SPRINT ST 70 Reinf. Wt (gsm) Width (mm) Resin Content (%) Format Tack Film Length (lm) Quantity (m 2 ) (m 2 ) Order Code Woven High Elongation Carbon (HEC) RC416T S/S No SA SPECIALIST RC416T S/S MET STL No ST SPECIALIST RC303T/RC303T F/S POPA Yes SA SPECIALIST Stitched Multi-axial High Elongation Carbon (HEC) XC S/S No SA SPECIALIST Stitched Multi-axial E-Glass QE S/S No ST SPECIALIST QE S/S No ST SPECIALIST Stitched Multi-axial E-Glass WRE581T S/S No TBC ST SPECIALIST AU/NZ AU NZ SPECIALIST = stocked product = stocked in Australia only = stocked in New Zealand only = please contact your local customer support team for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information. Gurit AU / NZ / SEA Product Catalogue 7 GPC_AUNZSEA_30_1118

9 Performance Prepreg & SPRINT Materials Gurit s range of performance prepregs provide a good balance of mechanical thermal and performance with flexible curing options. Product Selector Format System Main Features Fastest Cure Recommended Processing Method Max Tg 1 Typical Applications Prepreg SE 84LV Versatile high-strength prepreg system Curable at 80 C in thick sections 60 mins at 120 C Autoclave Press Moulding Vacuum Bagging 115 C High performance light-weight, highstress structures round the world yacht hulls and decks SPRINT ST 94 Drape and tackiness optimised for excellent handling Ideal for complex or vertical mouldings Excellent balance of mechanical performance and toughness 45 mins at 120 C Autoclave Press Moulding Vacuum Bagging 115 C Ideal for large structures where heavyweight materials need to remain in the mould for long durations prior to curing SPRINT ST 95 Good balance of mechanical properties Dry fabric resin infusion enables efficient air evacuation Toughened resistant to micro-cracking 60 mins at 120 C Autoclave Press Moulding Vacuum Bagging 125 C High volume industrial grade toughened SPRINT material SE 84LV SE 84LV is an exceptionally versatile hot-melt, epoxy prepreg, it can be cured at temperatures as low as 80 C, or it can be used for faster moulding of components at 120 C. This is achieved with an extremely good out-life of up to 56 days at 21 C. SE 84LV is a tough system, and offers excellent mechanical properties on a wide variety of reinforcing fabrics and fibres. ST 94 ST 94 is a toughened SPRINT system offering a good balance of mechanical properties. It comprises of a single layer of reinforcement fabric plied against a resin filmed paper. The resin film has a medium tack that makes it ideal for vertical surface applications. Although moderately tacky, ST 94 can be repositioned once in place without disturbing the underlying single SPRINT layers. ST 95 ST 95 is a toughened SPRINT system that offers an extremely good balance of mechanical properties. With a minimum cure temperature of 85 C (with a suitable post-cure), it is ideal for structural components where improved performance and resistance to microcracking is desired. ST 95 resin matrix has good flow resistant characteristics that make it stable at room temperature (21 C). The product has a light tack on one side which aids placement in a mould tool. For details of cure schedules, please refer to data sheet. Gurit AU / NZ / SEA Product Catalogue 8 GPC_AUNZSEA_30_1118

10 Code Selector SE 84LV Reinf. Wt (gsm) Width (mm) Resin Content (%) Format Length (lm) Quantity (m 2 ) (m 2 ) Order Code Unidirectional High Elongation Carbon (HEC) HEC POPA PC AU HEC POPA PC SPECIALIST HEC POPA PC SPECIALIST HEC POPA PC SPECIALIST HEC POPA PC AU/NZ HEC POPA PC SPECIALIST HEC DPE PC SPECIALIST HEC DPE PC SPECIALIST HEC DPE PC SPECIALIST HEC DPE PC SPECIALIST HEC POPA PC AU HEC POPA PC SPECIALIST Unidirectional Intermediate Modulus Carbon (IMC) IMC POPA PC SPECIALIST IMC POPA PC SPECIALIST IMC DPE PC SPECIALIST IMC POPA PC SPECIALIST IMC POPA PC SPECIALIST IMC POPA PC SPECIALIST IMC POPA PC SPECIALIST IMC DPE PC SPECIALIST IMC DPE PC SPECIALIST Unidirectional High Modulus Carbon (HMC) HMC POPA PC SPECIALIST HMC DPE PC SPECIALIST HMC DPE PC SPECIALIST HMC POPA PC SPECIALIST HMC DPE PC SPECIALIST HMC POPA PC SPECIALIST HMC DPE PC SPECIALIST HMC DPE PC SPECIALIST HMC DPE PC SPECIALIST AU/NZ AU NZ SPECIALIST = stocked product = stocked in Australia only = stocked in New Zealand only = please contact your local customer support team for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information. Gurit AU / NZ / SEA Product Catalogue 9 GPC_AUNZSEA_30_1118

11 Code Selector Continued SE 84LV Reinf. Wt (gsm) Width (mm) Resin Content (%) Format Length (lm) Quantity (m 2 ) (m 2 ) Order Code Woven High Elongation Carbon (HEC) RC200T DPE PC SPECIALIST RC200T PO PC SPECIALIST RC200P PO PC SPECIALIST RC303T PO PC SPECIALIST RC416T PO PC SPECIALIST RC660T DPE PC SPECIALIST RC660T PO PC SPECIALIST Stitched Multi-axial High Elongation Carbon (HEC) XC PO PC SPECIALIST XC PO PC SPECIALIST XC DPE PC SPECIALIST XC DPE PC AU/NZ XC PO PC SPECIALIST XC dpe PC SPECIALIST Woven E-Glass and Aramid RE50P POPA PC SPECIALIST RE100H DPE PC SPECIALIST RE165T POPA PC SPECIALIST RE PO PC SPECIALIST RE301H8D POPA PC SPECIALIST REA390S PO PC SPECIALIST Stitched Multi-axial E-Glass XE PO PC SPECIALIST XE PO PC SPECIALIST QE DPE PC SPECIALIST Peel Ply NPP PA PC NZ AU/NZ AU NZ SPECIALIST = stocked product = stocked in Australia only = stocked in New Zealand only = please contact your local customer support team for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information. Gurit AU / NZ / SEA Product Catalogue 10 GPC_AUNZSEA_30_1118

12 Performance Single Sided SPRINT ST 94 Reinf. Wt (gsm) Width (mm) Woven High Elongation Carbon (HEC) Resin Content (%) Format Tack Film Length (lm) Quantity (m 2 ) (m 2 ) Order Code RC200T S/S No SR SPECIALIST RC200T S/S No SR SPECIALIST RC303T S/S No SR SPECIALIST RC303T S/S No SR SPECIALIST RC416T S/S No SR SPECIALIST RC416T S/S No SR SPECIALIST RC660T S/S No SR SPECIALIST RC660T S/S No SR SPECIALIST Stitched Multi-axial High Elongation Carbon (HEC) XC S/S No SR SPECIALIST XC S/S No SR SPECIALIST XC S/S No SR SPECIALIST XC S/S No SR SPECIALIST XC S/S No SR SPECIALIST QC800(HEC) S/S No SR SPECIALIST Woven E-Glass RE301H S/S No SR SPECIALIST RE400T S/S No SR SPECIALIST RE400T S/S No SR SPECIALIST WRE581T S/S No SR SPECIALIST WRE581T S/S No SR SPECIALIST WRE850T S/S No SR SPECIALIST Stitched Multi-axial Glass and Aramid XA S/S No SR SPECIALIST XE S/S No SR SPECIALIST XE S/S No SR SPECIALIST XE S/S No SA SPECIALIST XE S/S No SR SPECIALIST XE S/S No SR SPECIALIST QE S/S No SR L SPECIALIST QE S/S No SR L SPECIALIST QE S/S No SR L SPECIALIST Resin Film ST 94 Film Resin Film No SR SPECIALIST Gurit AU / NZ / SEA Product Catalogue 11 GPC_AUNZSEA_30_1118

13 Performance Double Sided SPRINT ST 95 Reinf. Wt (gsm) Width (mm) Woven High Elongation Carbon (HEC) Resin Content (%) Format Tack Film Length (lm) Quantity (m 2 ) (m 2 ) Order Code RC303T/RC303T F/S Yes SL SPECIALIST RC416T/XC F/S Yes SL SPECIALIST RC416T/XC F/S Yes SL SPECIALIST RC416T/XC F/S POPA Yes SL SPECIALIST RC416T/XC F/S POPA Yes SL SPECIALIST RC416T/XC F/S POPA Yes SL SPECIALIST RC416T/XA450A F/S Yes SL SPECIALIST Stitched Multi-axial High Elongation Carbon (HEC) +45C2/-45C F/S POPA No SL SPECIALIST +45E3/-45E POPA Yes SL SPECIALIST Stitched Multi-axial E-Glass RE301/RE F/S POPA Yes SL SPECIALIST RA320/RA F/S POPA Yes SL SPECIALIST WRE581T/ WRE581T F/S POPA Yes SL SPECIALIST WRE581T/ WRE581T F/S POPA Yes SL L SPECIALIST WRE581T/ WRE581T F/S POPA Yes SL SPECIALIST AU/NZ AU NZ SPECIALIST = stocked product = stocked in Australia only = stocked in New Zealand only = please contact your local customer support team for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information. Gurit AU / NZ / SEA Product Catalogue 12 GPC_AUNZSEA_30_1118

14 High Performance Prepreg Materials Gurit s range of high performance prepregs offer exceptional benefits for a wide range of applications from rapid component manufacture to high-end cosmetic finishes. Product Selector Format System Main Features Fastest Cure Recommended Processing Method Max Tg 1 Typical Applications SPRINT ST110 Car Body Panel System SPRINT Resin 30 mins at 130 C Autoclave Vacuum Bag 115 C Body and closure panels for automotive applications Prepreg SC 110(T2) White spot free high clarity resin for cosmetic parts Versatile, high strength prepreg resin system Flexible cure as low as 80 C 20 mins at 150 C Autoclave Press Moulding 125 C Ideal for high visual quality components without white-wash or white spots Prepreg SC 160 Class leading resin clarity High temperature performance 15 mins at 160 C Autoclave Press Moulding 180 C Suitable for use in high temperature applications Prepreg Smartcure Rapid cure in less than 5 minutes Ideal for Hot-in Hotout press moulding manufacture 5 mins at 150 C Press Moulding 175 C High volume component manufacture. ST 110 for Car Body SPRINT (CBS) Structural ST 110 is used to form a multi layered material referred to as CBS Car Body SPRINT. It is used alongside a suitable surfacing film (SF80, SF80FROBL or SF96) and SY110 Syntactic Core to build up a CBS panel. The woven carbon and glass reinforcements can be used to lay up various panel combinations to suit the required stiffness and weight targets needed. For our range of surfacing films and syntactic core materials see Prepreg & SPRINT Ancillaries. SC 110(T2) SC 110(T2) is ideally suited to achieve visual surface quality. This cosmetic grade prepreg utilize a high clarity, versatile, hot-melt epoxy resin formulation. This specifically developed, unique formulation produces truly white-wash-free parts resulting in increased production Gurit AU / NZ / SEA Product Catalogue 13 GPC_AUNZSEA_30_1118

15 output and scrap cost savings of up to 20%. SC 110(T2) can be cured at temperatures as low as 80 C or even faster cures are achievable using press moulding technologies at temperatures up to 150 C. QUV SE Accelerated Weathering Test has revealed that Gurit SC 110(T2) carbon prepreg offers superior weathering performance compared with the current market range. SC 160 SC 160 are the first choice for perfect visual surface quality. The cosmetic grade prepregs utilize a high clarity, versatile, hot-melt epoxy resin formulation. SC 160 can be cured at temperatures as low as 130 C or even faster cures are achievable using press moulding technologies at temperatures up to 160 C. SC 160 offers class leading resin clarity for a prepreg resin suitable for use in high temperature applications of up to 160 C. Smartcure Press moulding is the most common production method in the automotive industry to increase production rates for structural and body panel applications to serial production levels. Gurit is assisting this growth by offering prepreg-based products suitable for various press moulding applications. The company has developed a range of prepregs which can be supplied in diverse reinforcement formats that will offer effective deposition rates. Gurit Smartcure is your fastest option for high volume press moulding production of structural automotive components. Cycle times of 5 minutes combined with preforming capability at room temperature and reduced finishing efforts result in increased production output as well as time and cost savings per part. True hot in, hot out processing of the innovative epoxy resin prepregs at steady press temperature guarantees constant part quality and energy savings combined with a good surface finish that is suitable for direct painting with various paints. Gurit AU / NZ / SEA Product Catalogue 14 GPC_AUNZSEA_30_1118

16 Code Selector ST 110 ST 110 Reinf. Wt (gsm) Width (mm) Resin Content (%) Format Length (lm) Quantity (m 2 ) (m 2 ) Order Code Woven High Elongation Carbon (HEC) RC200T(C) S/S SA SPECIALIST Woven E-Glass RE400T S/S SA SPECIALIST Cosmetic Prepreg SC 110(T2) Reinf. Wt (gsm) Width (mm) Resin Content (%) Format Length (lm) Quantity (m 2 ) (m 2 ) Order Code Woven High Elongation Carbon (HEC) RC200P DPE/CM PA SPECIALIST RC200T DPE/CM PA NZ RC245T DPE/CM PA SPECIALIST RC245T POPA/CM PA SPECIALIST RC380T DPE PA SPECIALIST RC400T DPE/CM PA SPECIALIST RC430P DPE PA SPECIALIST RC600T DPE PA SPECIALIST RC660T DPE PA SPECIALIST Black Pigmented (BL) Woven High Elongation Carbon (HEC) RC200P POPA PA SPECIALIST RC200T POPA PA SPECIALIST Stitched Multi-axial High Elongation Carbon (HEC) XC DPE PA SPECIALIST Stitched Multi-axial Glass XE DPE PA SPECIALIST SC 160 Reinf. Wt (gsm) Width (mm) Resin Content (%) Format Length (lm) Quantity (m 2 ) (m 2 ) Order Code Woven High Elongation Carbon (HEC) RC200P DPE/CM PA SPECIALIST RC200T DPE/CM PA SPECIALIST RC245T DPE/CM PA SPECIALIST RC380T DPE PA SPECIALIST RC660T DPE PA SPECIALIST RC660T DPE PA SPECIALIST AU/NZ AU = stocked product = stocked in Australia only NZ = stocked in New Zealand only SPECIALIST = please contact your local customer support team for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information. Gurit AU / NZ / SEA Product Catalogue 15 GPC_AUNZSEA_30_1118

17 5 Minute Curing Prepreg Smartcure Reinf. Wt (gsm) Width (mm) Resin Content (%) Format Length (lm) Quantity (m 2 ) Order Code Unidirectional High Elongation Carbon (HEC) HEC POPA PA SPECIALIST HEC(TC35R) POPA PA SPECIALIST Woven High Elongation Carbon (HEC) RC200P POPA PA SPECIALIST RC200T DPE PA SPECIALIST RC245T DPE PA SPECIALIST RC380T POPA PA SPECIALIST AU/NZ AU NZ SPECIALIST = stocked product = stocked in Australia only = stocked in New Zealand only = please contact your local customer support team for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information. Gurit AU / NZ / SEA Product Catalogue 16 GPC_AUNZSEA_30_1118

18 Aerospace Qualified Prepreg Materials Advanced Composite Materials for the Aerospace Industry Gurit has developed a broad range of strong, light and fire-retardant aerospace materials which are ideally suited for interior or structural components such as passenger and cargo floor panels, cabin linings, ceiling panels, air ducts, plenums, overhead compartments, lavatories, galleys, bars, wardrobes, partitions, seats, flap track and belly fairings, winglets and fins, landing gear doors, trailing edges and brackets. Gurit offers three resin chemistries: Chemistry Description Phenolic Phenolic based chemistry is well established within the aerospace and rail industries where ultimate fire retardant, low smoke emission and low smoke toxicity (FST) properties are required. Phenolic prepregs are therefore commonly used in interior aircraft components such as side walls and flooring. Epoxy Gurit has a range of fire-retardant epoxy systems suitable for applications where increased mechanical properties are required. They generally exhibit good flame spread properties and can be used in more structural components compared to phenolics such as flooring panels. Where the optimum blend of FST and mechanical properties is required, Gurit epoxy prepregs also can be co-cured with phenolic prepregs. This is an established approach to the manufacture of aerospace flooring sandwich panels. Cyanate Ester Cyanate ester prepregs provide excellent FST properties and can be used in thermally demanding applications due to their high glass transition temperatures (>200oC). Laminates constructed with cyanate ester prepregs demonstrate very low gas permeability and are volatile-free, resulting in low void and porous free components. This together with their excellent FST and high Tg properties make them ideal for airconditioning ducting construction in aerospace applications. For further information on product availability contact your local Gurit sales office. Gurit AU / NZ / SEA Product Catalogue 17 GPC_AUNZSEA_30_1118

19 Industrial Prepreg & SPRINT Materials Gurit s range of high industrial prepreg products were developed for the cost-effective manufacture of very large structures such as wind turbine blades using heavyweight reinforcements and low-cost chemistry. Product Selector Format System Main Features Fastest Cure Recommended Processing Method Max Tg 1 Typical Applications Prepreg Sparpreg UD prepreg ideal for thick structural sections Excellent handling & processing properties no de-bulk Fully compatible with Gurit SPRINT and prepreg products 45 mins at 120 C Autoclave Press Moulding Vacuum Bagging 125 C High quality monolithic unidirectional Components that require fast single shot production in thick sections Prepreg WE 91-1 WE 91-2 High tack epoxy prepreg Medium tack epoxy prepreg 45 mins at 120 C Autoclave Press Moulding Vacuum Bagging 125 C Large Structural components such as wind turbine blade shells and shear webs Prepreg WE 92 Medium tack epoxy prepreg Cost effective for large structures 45 mins at 120 C Autoclave Press Moulding Vacuum Bagging 125 C Large Structural components such as wind turbine blade shells and shear webs SPRINT WT 93 Low tack SPRINT resin matrix Dry fabric enables efficient air evacuation 45 mins at 120 C Autoclave Press Moulding Vacuum Bagging 125 C Large Structural components such as wind turbine blade shells, shear webs, spars and roots Sparpreg SparPreg is an advanced UD prepreg, developed to enable to economic manufacture of unidirectional spar caps for more demanding spar designs. SparPreg is specifically formulated to produce low void content unidirectional prepreg from vacuum bag only processing. WE 91-1 / WE 91-2 The WE91 prepreg product range comprises of two tack variants; WE 91-1 high tack and WE 91-2 medium tack prepregs. WE 91 is a high flow epoxy prepreg ideally suited to structural composite component manufacture. It can be cured at temperatures as low as 85⁰C, but can also be used for the rapid manufacture of components through its 45-minute cure at 120 C. Gurit AU / NZ / SEA Product Catalogue 18 GPC_AUNZSEA_30_1118

20 All of this can be achieved together with an out-life of 60 days at 21 C. WE 91-2 is designed for vacuum bag processing and offers excellent mechanical performance on glass and carbon fibre reinforcements. WE 92 WE 92 is a high flow epoxy prepreg ideally suited to the manufacture of thick sections. It can be cured at temperatures as low as 85 C, but can also be used for the rapid manufacture of components through its 45-minute cure at 120 C. All of this can be achieved together with an out-life of 60 days at 21 C. WT 93 WT 93 is a SPRINT resin system that can be cured at temperatures as low as 85⁰C, but can also be used for the rapid manufacture of components through its 45-minute cure at 120⁰C. All of this can be achieved together with an out-life of 21 days at 21⁰C. WT 93 is designed for vacuum bag processing and offers excellent mechanical performance on glass and carbon fibre reinforcements. Gurit s innovative WT 93 SPRINT product range uses a high flow, low tack epoxy prepreg and is ideally suited to the manufacture of thick sections such as turbine blade roots or spars. Gurit AU / NZ / SEA Product Catalogue 19 GPC_AUNZSEA_30_1118

21 Code Selector Sparpreg Reinf. Wt (gsm) Width (mm) Resin Content (%) Format Length (lm) Quantity (m 2 ) (m 2 ) Order Code Unidirectional High Elongation Carbon (HEC) HEC DPE PA SPECIALIST HEC DPE PA SPECIALIST HEC DPE PA SPECIALIST HEC DPE PA SPECIALIST Unidirectional E-Glass (EGL) EGL DPE PA SPECIALIST Woven High Elongation Carbon (HEC) RC660T DPE PA SPECIALIST WE 91-1 Reinf. Wt (gsm) Width (mm) Resin Content (%) Format Length (lm) Quantity (m 2 ) (m 2 ) Order Code Unidirectional E-Glass (EGL) EGL DPE PA SPECIALIST EGL DPE PA SPECIALIST EGL DPE PA SPECIALIST EGL DPE PA SPECIALIST Stitched Multi-axial E-Glass XE DPE PA SPECIALIST XE DPE PA SPECIALIST Peel Ply NPP S/S SA SPECIALIST NPP SA SPECIALIST NPP S/S SA SPECIALIST WE 91-2 Reinf. Wt (gsm) Width (mm) Resin Content (%) Format Length (lm) Quantity (m 2 ) (m 2 ) Order Code Stitched Multi-axial E-Glass XE DPE PA SPECIALIST XE PO PA SPECIALIST XE POPA PA SPECIALIST AU/NZ AU NZ SPECIALIST = stocked product = stocked in Australia only = stocked in New Zealand only = please contact your local customer support team for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information. Gurit AU / NZ / SEA Product Catalogue 20 GPC_AUNZSEA_30_1118

22 WE 92 Reinf. Wt (gsm) Width (mm) Resin Content (%) Format Length (lm) Quantity (m 2 ) (m 2 ) Order Code Stitched Multi-axial E-Glass YE DPE PA SPECIALIST WT 93 Reinf. Wt (gsm) Width (mm) Resin Content (%) Format Length (lm) Quantity (m 2 ) (m 2 ) Order Code Stitched Multi-axial E-Glass XE S/S SA SPECIALIST +45E3/-45E PO TBC SA R SPECIALIST QE1174L S/S SA SPECIALIST 1 Includes 50g/m2 Fleece AU/NZ AU NZ SPECIALIST = stocked product = stocked in Australia only = stocked in New Zealand only = please contact your local customer support team for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information. Gurit AU / NZ / SEA Product Catalogue 21 GPC_AUNZSEA_30_1118

23 Prepreg & SPRINT Ancillaries To complement Gurit s prepreg product range, Gurit also offers co-curable ancillary products including surfacing films, adhesive films, light-weight cores and intensifying pastes. Product Selector Format System Main Features Lowest Cure Recommended Processing Method Max Tg 1 Typical Applications Adhesive Film SA 70 SA 80 Highly toughened resin matrix Consistent bond-line thickness and weight High strain to failure, high toughness Excellent handling and no mixing required SF 70 Surface film to generate a resin rich surface SF 80 Suitable for subsurface applications 16 hrs at 70 C 12 hrs at 80 C 16 hrs at 70 C 12 hrs at 80 C Autoclave Press Moulding Vacuum Bagging Autoclave Press Moulding Vacuum Bagging 110 C 100 C 90 C 100 C Co-cure with 70 C prepregs for core and high strength adhesive bonding applications Co-cure with 80 C prepregs for core and high strength adhesive bonding applications Co-cure with 70 C prepregs for resin rich surface Co-cure with 80 C prepregs for resin rich surface Surface Films SF 96 Pinhole free surface for easy preparation and application of paint system 10 hrs at 85 C Autoclave Press Moulding Vacuum Bagging 115 C Co-cure with 85 C prepregs for resin rich surface ideal for sanding / priming prior to painting SF 95VH Silicon carbide filled film to generate very hard wearing surfaces 10 hrs at 85 C Autoclave Press Moulding Vacuum Bagging 130 C Ideal for applications that require a highly toughened system such as car body undertrays Intensifying Pastes SP SP 4832 SP 9435 Co-curable with prepreg systems Compatibility of handling and processing Ideal for core splicing and gap filling 16 hrs at 70 C 12 hrs at 80 C 12 hrs at 85 C Autoclave Press Moulding Vacuum Bagging 75 C 100 C 100 C Core splicing and gap filling with 70 C prepregs Low density, core splicing and gap filling with 80 C prepregs Core splicing, prevent bridging and gap filling with 85 C prepregs Syntactic Core SY 110 Lightweight drapable core material Co-curable with most Gurit Epoxy Prepregs & SPRINT Fast lay-up times Available at 0.7mm and 1.0mm thickness 12 hrs at 80 C Vacuum Bagging 110 C Produces ultra-light and stiff panels Gurit AU / NZ / SEA Product Catalogue 22 GPC_AUNZSEA_30_1118

24 Adhesive Films SA 70 is an adhesive film that is designed for secondary bonding, core-bonding and for cocuring with the range of Gurit prepregs. It can be cured at temperatures as low as 70 C, or can be more quickly cured at temperatures above 120 C. The product has an out-life of 28 days. SA 80 is an adhesive film that is designed for secondary bonding, core-bonding and for cocuring with the range of Gurit prepregs. It can be cured at temperatures as low as 80 C, or can be more quickly cured at temperatures above 120 C. It has an out-life of 56 days at room temperature. Surface Films Gurit have a range of surfacing materials specific to a number of applications. SF 70 and 80 are pale green lightweight, sandable films curable at 70 C and 80 C respectively. It provides a pin-hole free surface to all marine mouldings with minimal print-through, onto which a paint finish can be applied. SF 95VH is a silicon carbide filled surfacing system developed initially for the automotive sector to protect vulnerable underbody components of both GT racing and sports cars which minimises fibre damage from foreign object impacts. For details of cure schedules, please refer to data sheet. SF 96 is a grey filled epoxy film designed to enhance the surface finish of composite components. Curable at 85 C with a vacuum only process it provides an easy sanding pinhole free surface finish with minimal print through from the underlying laminate. SF 96 provides a stable surface onto which a paint finish can be applied once lightly keyed. Syntactic Core SY 110 is a lightweight drapable core material that is designed to be co-curable with most Gurit Epoxy Prepregs & SPRINT to produce ultra-light and stiff panels. SY 110 has a wide process window, curing from ºC. SY 110 is available at 0.7mm and 1.0mm thickness. Intensifying Pastes Gurit s mono-component pastes are pre-catalysed adhesive/filler systems that can be used in conjunction with Gurit prepregs and SPRINT. They are used as in-situ fillers to bridge corners or tight radii and can also be used as core splicing adhesives. The system range covers black and white variants in high and low densities. Being pre-catalysed system, they require freezer storage for long-term stock holding. Out-life at 21 C is 20 days. Gurit AU / NZ / SEA Product Catalogue 23 GPC_AUNZSEA_30_1118

25 Code Selector Adhesive Films SA 70 Reinf. Wt (gsm) Width (mm) Resin Weight (g) Format Length (lm) Quantity (m 2 ) (m 2 ) Order Code SA 70 Film g No Carrier PP SPECIALIST SA 70 Film g No Carrier PP SPECIALIST SA 70 Film g No Carrier PP SPECIALIST SA 70 Film g No Carrier PP SPECIALIST SA 70 Film g Scrim PP NZ SA 70 Film g Scrim PP NZ SA 70 Film g Scrim PP SPECIALIST SA 70 Film g Scrim PP SPECIALIST SA 80 Reinf. Wt (gsm) Width (mm) Resin Weight (g) Format Length (lm) Quantity (m 2 ) (m 2 ) Order Code SA 80 Film g No Carrier PC SPECIALIST SA 80 Film g No Carrier PP SPECIALIST SA 80 Film g No Carrier PC SPECIALIST SA 80 Film g No Carrier PC SPECIALIST SA 80 Film g No Carrier PC SPECIALIST SA 80 Film g No Carrier PC SPECIALIST SA 80 Film g No Carrier PC SPECIALIST SA 80 Film g Scrim PC AU SA 80 Film g Scrim PC SPECIALIST SA 80 Film g Scrim PC AU/NZ SA 80 Film g Scrim 20* PC SPECIALIST SA 80 Film g Scrim PC SPECIALIST SA 80 Film g Scrim PC SPECIALIST SA 80 Film g Scrim PC SPECIALIST Black Pigmented (BL) Adhesive Film SA 80 Film g Scrim PC SPECIALIST SA 80 Film g Scrim PC SPECIALIST *note that a minimum 4 roll order applies & an additional price premium may be applied AU/NZ AU NZ SPECIALIST = stocked product = stocked in Australia only = stocked in New Zealand only = please contact your local customer support team for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information. Gurit AU / NZ / SEA Product Catalogue 24 GPC_AUNZSEA_30_1118

26 Surfacing Films Reinf. Wt (gsm) Width (mm) Resin Weight (g) Format Length (lm) Quantity (m 2 ) (m 2 ) Order Code SF70 Film g 2 Scrims TBC SC SPECIALIST SF80 Film g 2 Scrims SC SPECIALIST SF80 Film g 2 Scrims 20* SC SPECIALIST SF80 Film g 2 Scrims SC ** SPECIALIST SF96 Film g 2 Scrims SA SPECIALIST SF96 Film g Scrim SA SPECIALIST SF95VH Film g Scrim SA SPECIALIST *note that a minimum 4 roll order applies & an additional price premium may be applied Syntactic Core Films SY 110 Width (mm) Resin Weight (g) Thickness (mm) Format Length (lm) Quantity (m 2 ) (m 2 ) Order Code SY 110 Film No Carrier SA SPECIALIST SY 110 Film No Carrier SA SPECIALIST Intensifying Pastes Size Units Description (Each) Order Code SP x 300 ml SP RESIN 300ml CARTRIDGE/BOX 20 1 FY SPECIALIST SP x 300 ml SP4832 RESIN 300ml CARTRIDGE/BOX 20 1 FX AU/NZ SP x 300 ml SP9435 RESIN 300ml CARTRIDGE/BOX 32 1 FX SPECIALIST AU/NZ AU NZ SPECIALIST = stocked product = stocked in Australia only = stocked in New Zealand only = please contact your local customer support team for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information. Gurit AU / NZ / SEA Product Catalogue 25 GPC_AUNZSEA_30_1118

27 Fire Retardant Materials Gurit s range of Fire Retardant (FR) products are designed to deliver high performance laminates whilst meeting demanding fire requirements. The ease of use and processing properties of these systems allow large parts to be manufactured in one operation using vacuum only consolidation. The FR range is available in a wide variety of formats from ambient curing liquid systems to elevated temperature curing SPRINT products. Typical applications include cladding of buildings, interior and exterior train parts, commercial/military craft and fire protection on passenger ferries/superyachts. Product Selector Format System Main Features Laminating SPRINT Prepreg Surface Film Ampreg 21FR ST 91FR SE 90FRBL SF 80FROBL Range of working times Capable of ambient only cures Ideal for wet laminating large composite structures Outstanding compressive properties Low void content vacuum bag processing Controlled flow Light tack suitable for use in higher ambient temperature Black tinted resin Outstanding compressive properties Controlled flow Light tack Effect FR layer to epoxy substrates High gloss black surface finish Resistant to Moisture ingress Intended Application Large Civil Structures Civil Structures Civil Structures Protection of structural components; engine bays and exhaust runs in marine craft Fire Test Standards BS 476 (Parts 6 & 7) UL94 ASTM E84 UL94 BS476 Part 7 ISO FMVSS302 Fire Retardant Laminating Systems Fire Retardant SPRINT Systems Fire Retardant Prepreg Systems Gurit AU / NZ / SEA Product Catalogue 26 GPC_AUNZSEA_30_1118

28 Code Selector Fire Retardant Laminating Systems Ampreg 21FR Size Units Description Mix Ratio (R:H) (Each) Order Code Individual resin component size Resin 257 kg AMPREG 21FR RESIN 257KG 2 F SPECIALIST Resin kg AMPREG 21FR RESIN 15.85KG 6 F SPECIALIST Use the mix ratio to select recommended hardener component size Standard 18 kg AMPREG21 HARD STD 18KG 1 F SPECIALIST Standard 3.33 kg AMPREG21 HARD STD 3.33KG 100:21 1 F SPECIALIST Slow 3.33 kg AMPREG21 HARD SLOW 3.33KG (by weight) 1 F SPECIALIST Extra Slow 18 kg AMPREG21 HARD EXT-SLOW 18KG 1 F SPECIALIST Ultra Slow 900 kg AMPREG 21FR UL-SLOW HARD 900KG Ultra Slow 15.4 kg AMPREG 21FR UL-SLOW HARD 15.4KG A/F Fire Retardant SPRINT Systems 100:18 (by weight) 1 F SPECIALIST 1 F SPECIALIST SPRINT Reinf. Wt (gsm) Width (mm) RC (%) Format Length (lm) Quantity (m 2 ) (m 2 ) Order Code ST 91FR XC S/S SA SPECIALIST XC S/S SA SPECIALIST WRE581T S/S SA SPECIALIST YE S/S SA SPECIALIST AU/NZ AU NZ SPECIALIST = stocked product = stocked in Australia only = stocked in New Zealand only = please contact your local customer support team for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information. Gurit AU / NZ / SEA Product Catalogue 27 GPC_AUNZSEA_30_1118

29 Fire Retardant Prepreg Systems Prepreg Reinf. Wt (gsm) Width (mm) RC (%) Format Length (lm) Quantity (m 2 ) (m 2 ) Order Code SE 90FRBL XC PO PG SPECIALIST Ancillaries Reinf. Reinf. Wt (gsm) Width (mm) Resin Weight (g) Format Length (lm) Quantity (m 2 ) (m 2 ) Order Code SF 80FROBL Scrim Surface Film SC SPECIALIST SF 80FROBL 2 Scrims Surface Film SC SPECIALIST AU/NZ AU NZ SPECIALIST = stocked product = stocked in Australia only = stocked in New Zealand only = please contact your local customer support team for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information. Gurit AU / NZ / SEA Product Catalogue 28 GPC_AUNZSEA_30_1118

30 Core Materials Introduction Cores in a sandwich construction are specified by designers and architects to increase stiffness and reduce the weight of a composite structure. Gurit has a range of core materials to fit any specification or manufacturing process. Gurit Corecell Gurit Corecell is a structural foam core material using a SAN polymer base featuring high toughness and impact resistant characteristics. Gurit Corecell has become widely accepted for the construction of large, high performance structures. Although originally developed for the marine industry, it is now used in a range of other applications such as wind turbines and sub-sea vessels. Gurit Corecell grades have various type approvals including the American Bureau of Shipping (ABS), Det Norske Veritas Germanischer Lloyd (DNVGL), Registro Italiano Navale (RINA) and Bureau Veritas (BV). Please check for additional product approvals. Gurit PVC Gurit PVC is a closed cell, cross-linked PVC foam. It provides high strength to weight ratio for all composite application, as well as the addition of high temperature grades in 60 and 80 kg/m 3 densities. Gurit Kerdyn Green Gurit Kerdyn Green is a recyclable, thermoplastic foam produced out of 100% recycled PET with good mechanical properties, temperature resistance and significantly improved resin uptake. Offering a cost efficient solution against higher performance cores, the range will offer both normal and fire retardant densities. Gurit Balsaflex Gurit Balsaflex is the classic end-grain balsa wood core, featuring highest strength and stiffness to weight ratio of all core materials. Gurit Balsaflex is available in range of densities, thickness and format/finish. Gurit Balsaflex is approved by Det Norske Veritas Germanischer Lloyd (DNVGL) Gurit AU / NZ / SEA Product Catalogue 29 GPC_AUNZSEA_30_1118

31 Forms of Supply Gurit standard product forms are described below. Gurit can also tailor sheets to your own specification - please call to discuss your requirements. PL Plain Sheet Optimum material properties. Limited bending inmould. PH Plain with Bleeder Holes Assists air release in vacuum bag processes. Cuts for conformability (Foam) Gurit knife cut finish is standard on Gurit Corecell and Gurit Kerdyn. Saw cut is standard for Gurit PVC while knife cut finish on Gurit PVC is limited. Knife cuts are not visible when the sheets lie flat and these narrow knife-cuts minimize unnecessary resin consumption compared to saw-cut core finishes. Please be advised that cuts are dependent upon the density and thickness of the material. Higher density and thickness materials may need to be saw cut. Maximum sheet size is half of a full-size sheet. Please contact your customer support representative for more information. SC Single Cut Provides flexibility in a single direction on one or both sides of a sheet. If done on both sides, the cuts intersect so no bleeder holes are necessary for vacuum bagging. Max sheet size is half of a full-size sheet. DC Double Cut Provides optimum flexibility in two directions on one or two sides of the sheets. If Double-Cut on both sides, the intersecting cuts make DC a highly effective resin infusion medium. Max sheet size is half of a full-size sheet. CS Contour Scrim Provides optimum flexibility in two directions. Sheets are cut in 30mm squares and bonded to a glass scrim. Available in half sheet size only. Gurit AU / NZ / SEA Product Catalogue 30 GPC_AUNZSEA_30_1118

32 Forms of Supply VIC Vacuum Infusion Core There are several VIC options and Gurit can customise grooving patterns and bleeder holes as required. For curved laminate sections, double-sided DC is very effective system for resin infusion with low weight gain. Heat-forming VIC surface cut also useful for obtaining curved panels with minimal resin uptake. Product Formats (Balsa) Gurit Balsaflex is available plain or with typical formats including perforations, microgrooves, with or without scrim, contour scrim and with optional coating. Other Product Formats Bead and Cove - Bead and cove strip planking aids the building of large, curved structures, in a mouldless build method. Fillet strips Triangular edge strips to create tapered panel edge drop-offs, or stringer base fillets. Kits Gurit has an extensive kitting capability to provide all the formats described here in customized, numbered, ready to use, CNC machined kits. Gurit AU / NZ / SEA Product Catalogue 31 GPC_AUNZSEA_30_1118

33 Core Materials Range Gurit Corecell M Gurit Corecell M is the next generation of Gurit Corecell. Combining high static properties, high toughness and compatibility with infusion and prepreg processes. Gurit Corecell M benefits from American Bureau of Shipping (ABS), Det Norske Veritas Germanischer Lloyd (DNVGL), Registro Italiano Navale (RINA) and Bureau Veritas (BV) certification. Gurit Corecell S Gurit Corecell S has been developed primarily to resist hydrostatic pressures in sub-sea applications. It is manufactured in two densities, and buoyancy modules can therefore be designed to depths up to 1100 metres (averages). Gurit Corecell S is only available in full thickness. Gurit Corecell T Gurit Corecell T is the lightest density Corecell foam available. T400 provides improved compressive strength over M60 and is better suited for thin skinned laminates. Gurit Corecell T has ABS and DNVGL certifications. Gurit Kerdyn Green Gurit Kerdyn Green and Gurit Kerdyn Green FR are both 100% recycled PET foam, offering a wide range of densities and significantly improved resin uptake performance. The latest product range gained DNVGL certification. Gurit PVC Gurit PVC is a closed cell, cross-linked PVC foam. It provides high strength to weight ratio for all composite applications. Gurit PVC has DNV certification. The Gurit PVC range also offers HT60 and HT80 with high temperature processing up to 140 C. Gurit Balsaflex Gurit Balsaflex is the classic high quality end-grain balsa wood core. Rigid panels are available in higher thickness, flexible panels are available up to 55mm. Large flexible panels with 1220 x 1220mm are also available. Gurit Balsaflex has DNVGL certification. Gurit AU / NZ / SEA Product Catalogue 32 GPC_AUNZSEA_30_1118

34 Code Selector Gurit Corecell Corecell Short Edge Marking Nominal Density Nominal Sheet Size Unbonded Thickness Range kg/m3 mm mm Gurit Corecell M available from the Gurit AU / NZ and Gurit Tianjin (China) sites M60 Yellow + Green x AU/NZ M80 Yellow + Blue x AU/NZ M100 Yellow + Black x AU/NZ M130 Yellow + Light Brown x AU/NZ M200 Yellow + Brown x AU/NZ Gurit Corecell T available from the Gurit sites in Magog (Canada) and in Tianjin (China). T400 White + Green x SPECIALIST T500 White + Blue x SPECIALIST Gurit Corecell S available from the Gurit site in Magog (Canada) S1200 Red + Brown x SPECIALIST S1800 Red + Mauve x SPECIALIST Please note: Maximum unbonded thicknesses can vary across Gurit sites. Please contact your local sales representative for more information Gurit Kerdyn Green Core Type Short Edge Marking Nominal Density Nominal Sheet Size Unbonded Thickness Range kg/m3 mm mm Gurit Kerdyn Green available from the Gurit NZ and Gurit Tianjin (China) sites 80 Blue /1220 x AU 100 Green /1220 x NZ 115 Black /1220 x SPECIALIST 135 Black + Green /1220 x SPECIALIST 150 Orange /1220 x SPECIALIST 200 Black + Yellow /1220 x SPECIALIST 250 Black + Blue /1220 x SPECIALIST 300 Black + Orange /1220 x AU/NZ Gurit Kerdyn Green FR available from the Gurit Tianjin (China) site 80 Blue + Red x SPECIALIST 115 Black + Red x SPECIALIST 180 Brown + Red x SPECIALIST Gurit AU / NZ / SEA Product Catalogue 33 GPC_AUNZSEA_30_1118

35 Gurit PVC and PVC HT Core Type Short Edge Marking Nominal Density Nominal Sheet Size Unbonded Thickness Range kg/m3 mm mm Gurit PVC is available through selected countries. Contact your local sales representative for more information. 40 Azure x NZ 48 Lilac x NZ 60 Yellow x AU/NZ 80 Green x AU/NZ 100 Red x NZ 130 Blue x NZ 200 Brown x NZ 250 Green x SPECIALISTZ Gurit PVC HT is available through selected countries. Contact your local sales representative for more information. HT60 Pink x SPECIALIST HT80 Light Yellow x SPECIALIST Gurit Balsaflex Core Type Short Edge Marking Nominal Density Gurit Balsaflex available from the Gurit sites in Equador and China. Nominal Sheet Size Unbonded Thickness Range kg/m3 mm mm 110 Written x SPECIALIST 150 Written x SPECIALIST 220 Written x SPECIALIST Please note: Maximum unbonded thicknesses can vary across Gurit sites. Please contact your local sales representative for more information AU/NZ AU NZ SPECIALIST = stocked product = stocked in Australia only = stocked in New Zealand only = please contact your local customer support team for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information. Gurit AU / NZ / SEA Product Catalogue 34 GPC_AUNZSEA_30_1118

36 Nomex Honeycomb Nomex Honeycomb - Plain Sheet (Hex) Plain sheet Nomex is manufactured from Aramid paper & is a very uniform looking honeycomb cell shape. The shear properties vary with direction, with substantially higher values in width direction of the sheet (TL). The plain sheet is not formable like both the PX and OX cell shapes. The Ribbon direction is the TL direction Has the highest shear property (only direction only) of all three types of Nomex. Average Density (kg/m 3 ) Sheet Length (mm) Width (mm) Area (m2) Thickness Range (mm) Thickness range offered is 3mm up to maximum 400mm upon request Paper Thickness (um) or or Commercial / Aerospace Grade Commercial Commercial Commercial Commercial Commercial Cell Size 1/8" (3.2mm) 1/8" (3.2mm) 1/8" (3.2mm) 1/8" (3.2mm) 1/8" (3.2mm) AU/NZ NZ SPECIALIST SPECIALIST SPECIALIST Nomex Honeycomb Over Expanded (OX) The Over Expanded Nomex (OX) offers excellent formability over complex shapes but the shear properties are substantially lower than plain sheet Nomex. Good formability Low shear properties The Ribbon direction is the TL direction Average Density (kg/m 3 ) Sheet Length (mm) Width (mm) Area (m2) Thickness Range (mm) Thickness range offered is 3mm up to maximum 400mm upon request Paper Thickness (um) or or or Commercial / Aerospace Grade Commercial Commercial Commercial Commercial Commercial Cell Size 3/16" (4.8mm) 3/16" (4.8mm) 3/16" (4.8mm) 3/16" (4.8mm) 3/16" (4.8mm) SPECIALIST/NZ SPECIALIST NZ SPECIALIST SPECIALIST Gurit AU / NZ / SEA Product Catalogue 35 GPC_AUNZSEA_30_1118

37 Nomex Guide - which Nomex should I use? Partially Expanded Nomex (PX) is manufactured with 3/1000th inch (76um) Aramid paper which is 50% thicker than the standard paper used in both the plain sheet (Hex) and Over Expanded (OX). The result of this is that it offers substantially higher shear properties in both directions over the standard OX while still offering the formability of the Over Expanded cell shape. The shear properties of PX Nomex are fairly even in both the TW & TL directions but are substantially better than OX Nomex. The Ribbon direction is the TL direction Over Expanded Nomex (OX) is manufactured with 2/1000th inch (51um) Aramid paper. This offer excellent formability over complex shapes but the shear properties are substantially lower than both the PX & plain sheet Nomex. Good formability Low shear properties The Ribbon direction is the TL direction Plain Sheet Nomex (Hex) is manufactured from 2/1000th inch (51um) Aramid paper and is a very uniform looking honeycomb cell shape. The shear properties vary with direction, with substantially higher values in width direction of the sheet (TL). The plain sheet is not formable like both the PX and OX cell shapes. The Ribbon direction is the TL direction Has the highest shear property (only direction only) of all three types of nomex. High Shear Plain Sheet (HS Hex) is manufactured from 3/1000th inch (76um) Aramid paper. The shears are higher due to the thicker paper. Kevlar 636 Honeycomb is available, it must be noted that this material is expensive and inherently stiffer to bend around any shape. The shear properties are higher than standard Nomex material & may allow (depending on the structural engineers) weight saving by utilising lower densities. Gurit AU / NZ / SEA Product Catalogue 36 GPC_AUNZSEA_30_1118

38 B³ SmartPac from Gurit B³ SmartPac is a versatile construction solution that helps builders manufacture composite components more efficiently and cost-effectively than ever before. B³ SmartPac comprises all the reinforcement and core materials required for the job, pre-cut to the exact shape and size to fit the mould, and clearly labelled for alignment and location. The materials are packed in boxes in the order of assembly, and are accompanied by a comprehensive schematic and written construction manual, with a process defined in conjunction with the builder, and with integral quality controls. B³ SmartPac Benefits Reduced overall costs through: reduced time in-mould reduced labour costs reduced waste levels reduced material costs Repeatable process with known costs and known quality Efficient procurement Order one B³ SmartPac instead of multiple materials One-stop-shop for materials, engineering, quality control, and process support Improved overall quality The B³ SmartPac is suitable for many types of marine applications, and most processing techniques and products. Volume production boats Semi-custombuilds Custom builds Commercial/military boats Superyachts Hand lay-up Epoxy, vinylester, polyester Vacuum infusion Resin Transfer Moulding (RTM) Prepreg and SPRINT Whatever the requirement, Gurit can package and supply the B³ SmartPac to meet your specific needs. Gurit AU / NZ / SEA Product Catalogue 37 GPC_AUNZSEA_30_1118

39 Adhesive Systems Spabond Adhesives Spabond adhesives offer outstanding performance in high-stress, high-load applications for Marine, Wind Energy and Civil Engineering applications. Spabond 300 Series: structural, high dynamic load applications Spabond 500 Series: specialist substrate and applications Spabond 700 Series: for aesthetic carbon laminate applications Smartfuse Adhesives Smartfuse high performance industrial adhesives offer a range of working and fixture times when bonding multiple / dissimilar substrates for Automotive, Transportation, Industrial, Construction applications. Smartfuse Epoxy: high-modulus adhesive for structural applications Gurit adhesive systems product descriptions may contain the following nomenclature: S/S straight sided metal pail for mixing machine extrusion and automated dispense Please note: A suitable mixing method is required to mix and dispense Spabond adhesives. For our range of dispense guns and mix heads, please refer to the Ancillary Products section. Gurit AU / NZ / SEA Product Catalogue 38 GPC_AUNZSEA_30_1118

40 Adhesives Selector Guide System Description Hardener Mix Ratio Working Time at 20 C Clamp Time* at 20 C Sag Max Temp Spabond 300 Series: structural, high dynamic load applications Spabond 335 Spabond 340LV HT Spabond 345 Toughened gap filling epoxy adhesive system. High strength, rubber toughened, fast dispense. Uses: Industrial, wind energy and marine. Highly sag resistant. Uses: highest performance marine projects Fast (Black) 2:1 20 mins 6 hrs Standard (Grey) (by volume) 1 hr 9 hrs Fast (Red) ½ hr 4 hrs Slow (Purple) 2:1 4 hrs 18hrs (by volume) Extra Slow (Blue) 6 hrs 24 hrs Fast (Black) ½ hr 5 ½ hrs 5mm 65 C 20 25mm 68 C 75 C Slow (Red) 2:1 4 hrs 12 hrs C (by volume) 30mm Extra Slow (Blue) 6 hrs 19 hrs 80 C Spabond 500 Series: specialist substrate and applications Spabond 5 Minute `Tacking and secondary bonding. 1:1 (by volume) 5 mins 20 mins 10-15mm 55 C Spabond 540 Spabond 540LV High elongation, long bonding times. Low viscosity resin option for easier application. Fast (Red) ¾ hr 3 ½ hrs 56 C Standard (Purple) Slow (Green) 1:1 (by volume) 2 hrs 4 hrs 15 hrs 25 hrs 20 30mm 58 C 52 C Extra Slow (Blue) 6 ½ hrs tbc tbc Spabond 568 Spabond 570 Spabond 570LV Core bonding adhesive 2:1 (by volume) Easy mixing/smooth spreading. Bonds all woods 1:1 Low viscosity hardener option for easier application (by volume) 5 ½ hrs 24 hrs 10mm 65 C 1 ½ hrs tbc 10-20mm 55 C Spabond 700 Series: rapid structural adhesives Spabond 730 High strength, rapid curing. General purpose adhesive. 1:1 (by volume) 10 mins 1 hr 10-15mm 60 C Smartfuse Epoxy: industrial adhesive range E1009 1:1 (by volume) 10 mins 1 hr 50 C E2025 Bonds multiple substrates found in general applications. Ideal for crossmarket 25 mins 5 hrs C E2090 applications - Automotive, 2:1 20mm Transportation, Industrial, Construction 90 mins 10 hrs (by volume) 61 C E mins 13 hrs 58 C *clamp time is determined as the time to reach a cleavage strength of 2kN Gurit AU / NZ / SEA Product Catalogue 39 GPC_AUNZSEA_30_1118

41 Code Selector Spabond 300 Series: structural, high dynamic load applications Spabond 335 Size Units Description Mix Ratio (R:H) (Each) Order Code Resin 20 kg SP335 RESIN 20KG 6 F SPECIALIST Fast 9.2 kg SP335 HARD FAST 9.2KG Standard 8.8 kg SP335 HARD STD 8.8KG 100:46 (by weight) 100:44 (by weight) 1 F SPECIALIST 1 F SPECIALIST Spabond 340LVHT Size Units Description Mix Ratio (R:H) (Each) Order Code Resin and hardener pack sizes HT Fast Pack 400 ml SP340LV R/HF-HT 400ml CART/BOX OF 20 1 F AU/NZ HT Fast Pack 900 ml SP340LV-R/HF-HT 900ml CART/BOX OF 10 1 F SPECIALIST HT Slow Pack 400 ml SP340LV R/HSL-HT 400ml CART/BOX OF 20 1 F AU/NZ HT Slow Pack 900 ml SP340LV-R/HSL-HT 900ml CART/BOX OF 10 1 F SPECIALIST HT Extra-slow 400 ml SP340LV R/HXS-HT 400ml CART/BOX OF 20 1 F SPECIALIST HT Extra-slow 900 ml SP340LV-R/HXS-HT 900ml CART/BOX OF 10 1 F SPECIALIST Individual resin component size Resin 200 kg SP340LV RESIN 200KG 1 F SPECIALIST Resin 20 kg SP340LV RESIN 20KG 6 F AU/NZ Resin 20 kg SP340LV RESIN 20KG S/S 6 F SPECIALIST Use the mix ratio to select recommended hardener component size HT Fast 200 kg SP340 HARD FAST (HT) 200KG 1 F AU/NZ HT Fast 20 kg SP340 HARD FAST (HT) 20KG 100:49 (by weight) 1 F SPECIALIST HT Fast 10 kg SP340 HARD FAST (HT) 10KG 1 F AU HT Slow 200 kg SP340 HARD SLOW (HT) 200KG 1 F AU/NZ HT Slow 20 kg SP340 HARD SLOW (HT) 20KG 100:49 (by weight) 1 F SPECIALIST HT Slow 10 kg SP340 HARD SLOW (HT) 10KG 1 F AU/NZ HT Extra-slow 200 kg SP340 HARD EX-SLOW (HT) 200KG 1 F AU/NZ HT Extra-slow 20 kg SP340 HARD EX-SLOW (HT) 20KG 100:47 (by weight) 1 F SPECIALIST HT Extra-slow 10 kg SP340 HARD EX-SLOW (HT) 10KG 1 F AU/NZ AU/NZ AU NZ SPECIALIST = stocked product = stocked in Australia only = stocked in New Zealand only = please contact your local customer support team for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information. Gurit AU / NZ / SEA Product Catalogue 40 GPC_AUNZSEA_30_1118

42 Spabond 345 Size Units Description Resin and hardener pack sizes Mix Ratio (R:H) (Each) Order Code Fast Pack 400 ml SP345 R/HF 400ml CART/BOX 20 1 F AU/NZ Black Fast Pack 400 ml SP345 R/HFBL400ml CART/BOX 20 1 F AU/NZ Slow Pack 400 ml SP345 R/HSL 400ml CART/BOX 20 1 F AU/NZ Individual resin component size Resin 20 kg SP345 RESIN 20KG 6 F AU Resin 20 kg SP345 RESIN 20KG S/S 6 F SPECIALIST Use the mix ratio to select recommended hardener component size Fast 20 kg SP345 HARD FAST 20KG 1 F SPECIALIST Fast 9.6 kg SP345 HARD FAST 9.6KG 100:48 (by weight) 1 F SPECIALIST Black Fast 9.6 kg SP345 HARD FAST BLACK 9.6KG 1 F AU Slow 20 kg SP345 HARD SLOW 20KG 100:48 1 F SPECIALIST Slow 9.6 kg SP345 HARD SLOW 9.6KG (by weight) 1 F SPECIALIST Extra-slow 9.6 kg SP345 HARD EX-SLOW 9.6KG 100:48 (by weight) 1 F SPECIALIST Spabond 500 Series: specialist substrate and applications Spabond 5 Minute Size Units Description Resin and hardener pack sizes Pack 400 ml SP 5-MIN.ADH.R/H 400ml CARTRIDGE/BOX 20 Mix Ratio (R:H) (Each) Order Code 1 F SPECIALIST Resin 310 ml Hardener 310 ml SP 5-MIN.ADH.RES.310ml N/ PIGCART/BOX 20 SP 5-MIN.ADH.HARD.310ml N/PIGCART/BOX 20 1 F AU 1 F AU Spabond 568 Size Units Description Mix Ratio (R:H) (Each) Order Code Individual resin component size Resin 17.5 kg SP568 RESIN 17.5KG 6 F SPECIALIST Resin 10 kg SP568 RESIN 10KG (15.1L) 12 F SPECIALIST Use the mix ratio to select recommended hardener component size Hardener 7.7 kg SP568 HARD EXTRA-SLOW 7.7KG 100:44 1 F SPECIALIST Hardener 4.4 kg SP568 HARD EXTRA SLOW 4.4KG/7.6L (by weight) 1 F SPECIALIST AU/NZ AU NZ SPECIALIST = stocked product = stocked in Australia only = stocked in New Zealand only = please contact your local customer support team for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information. Gurit AU / NZ / SEA Product Catalogue 41 GPC_AUNZSEA_30_1118

43 Spabond 540 Size Units Description Mix Ratio (R:H) (Each) Order Code Resin and hardener pack sizes Fast Pack 600 ml SP540LV R/HF 600ml CART/BOX OF 12 1 F SPECIALIST Standard Pack 600 ml SP540LV R/HSTD 600ml CART/BOX OF 12 1 F SPECIALIST Slow Pack 600 ml SP540LV R/HSL 600ml CART/BOX OF 12 1 F SPECIALIST Individual resin component size Resin 200 kg SP540 RESIN 200KG 1 F SPECIALIST Resin 20 kg SP540 RESIN 20KG 6 F AU LV Resin 20 kg SP540LV RESIN 20KG 6 F SPECIALIST LV Resin 20 kg SP540LV RESIN 20KG S/S 6 F SPECIALIST Use the mix ratio to select recommended hardener component size Fast 19.0 kg SP540 HARD FAST 19.0KG 100:95 9 F SPECIALIST Fast 19.0 kg SP540 HARD FAST 19.0KG S/S (by weight) 1 F SPECIALIST Standard 18.4 kg SP540 STANDARD HARDENER 18.4KG 1 F SPECIALIST Standard 18.4 kg SP540 STANDARD HARDENER 18.4KG S/S 100:92 (by weight) 7 F SPECIALIST Standard 184 kg SP540 HARD STD 184KG 1 F SPECIALIST Slow 18.6 kg SP540 SLOW HARDENER 18.6KG 7 F SPECIALIST Slow 18.6 kg SP540 SLOW HARDENER 18.6KG S/S 100:93 (by weight) 7 F AU Slow 186 kg SP540 SLOW HARDENER 186KG 1 F SPECIALIST Extra-slow 18.2 kg SP540 HARD EXTRA SLOW 18.2KG 100:91 (by weight) 7 F SPECIALIST Spabond 570 Size Units Description Mix Ratio (R:H) (Each) Order Code Individual resin component size Resin 20 kg SP570 RESIN 20KG 6 F SPECIALIST Resin 20 kg SP570 RESIN 20KG S/S 6 F SPECIALIST Resin 5 kg SP570 RESIN 5KG 15 F SPECIALIST Use the mix ratio to select recommended hardener component size Hardener 20 kg SP570 HARD STANDARD 20KG 1 F SPECIALIST Hardener 20 kg SP570 HARD STANDARD 20KG S/S 1 F SPECIALIST Hardener 5 kg SP570 HARD STANDARD 5KG 100:100 (by weight) 1 F SPECIALIST LV Hardener 5 kg SP570LV HARD STANDARD 5KG 1 F SPECIALIST LV Hardener 20 kg SP570LV HARD STANDARD 20KG 1 F SPECIALIST Gurit AU / NZ / SEA Product Catalogue 42 GPC_AUNZSEA_30_1118

44 Spabond 700 Series: rapid structural adhesives Spabond 730 Size Units Description Mix Ratio (R:H) (Each) Order Code Resin and hardener pack sizes Pack 400 ml SP730 R/H 400ml CART/BOX 20 1 F SPECIALIST Smartfuse Epoxy Series: rapid structural adhesives Smartfuse Size Units Description Mix Ratio (R:H) (Each) Order Code Resin and hardener pack sizes Pack 400 ml SMARTFUSE E1009 R/H 400ml CART/BOX 12 1 F SPECIALIST Pack 400 ml Pack 400 ml Pack 400 ml Individual resin component size SMARTFUSE E2025 R/HF 400ml CARTS/BOX 12 SMARTFUSE E2090 R/HSL 400ml CARTS/BOX 12 SMARTFUSE E2350 R/HXS 400ml CARTS/BOX 12 1 F SPECIALIST 1 F SPECIALIST 1 F SPECIALIST E1 Resin 20 kg SMARTFUSE E1 RESIN 20KG S/S 1 F SPECIALIST E2 Resin 20 kg SMARTFUSE E2 RESIN 20KG S/S 1 F SPECIALIST Use the mix ratio to select recommended hardener component size E1009 Hard 20 kg SMARTFUSE E1009 HARD 20KG S/S 1:1 (by weight) 1 F SPECIALIST E2025 Hard 20 kg SMARTFUSE E2025 HARD 20KG S/S 1 F SPECIALIST E2090 Hard 20 kg SMARTFUSE E2090 HARD 20KG S/S 2:1 (by weight) 1 F SPECIALIST E2350 Hard 20 kg SMARTFUSE E2350 HARD 20KG S/S 1 F SPECIALIST For our range of dispense guns and mix heads, please refer to the Ancillary Products section. AU/NZ AU NZ SPECIALIST = stocked product = stocked in Australia only = stocked in New Zealand only = please contact your local customer support team for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information. Gurit AU / NZ / SEA Product Catalogue 43 GPC_AUNZSEA_30_1118

45 Liquid & Filled Systems Gurit is a leading supplier of high performance epoxy products formulated to meet market and customer needs. Gurit s innovative approach and expertise in epoxy formulations continues to deliver market leading products for a wide range of market segments. Gurit provides a complete range of formulated products from in-mould gelcoats to multi-purpose systems. Laminating Systems Infusion Systems RTM System Multi-Purpose Systems Code Selector Filling and Fairing Tooling Products Coatings Gurit AU / NZ / SEA Product Catalogue 44 GPC_AUNZSEA_30_1118

46 Laminating Systems The Ampreg wet laminating range consists of standard, commonly used laminating products, as well as systems with higher strengths and operating temperatures. A complete range of hardeners and modifiers give a wide variety of working times, viscosities and thixotropy. Product Selector System Description Hardener Speed Mix ratio Intended Application Ampreg 30 Low toxicity laminating system; good wet-out & mechanical properties. Available with Light Reflective Technology (LRT) Fast Standard Slow Extra Slow 1-2 hrs 2-3 hrs 4-7 hrs 7-10 hrs 100 : 26 (parts by weight) Manufacture of large composite structures in the marine, wind and construction industries Fast 1-2 hrs Ampreg 22 Good wet out; low byproduct; good Tg generation Standard Slow Extra Slow 2-3 hrs 6-7 hrs 7-10 hrs 100 : 28 (parts by weight) Medium to large mouldings 14 hour 14 hrs Ampreg 26 Premium laminating system with high mechanical properties and high Tg Fast Slow Ultra Slow 1-2 hrs 7 hrs 8-10 hrs 100:33 (parts by weight) High performance large mouldings Ampreg F component expanding epoxy system good for gap filling with consistent foam density Slow Extra Slow Fully foamed less than 1 hr, Cure time varies with geometry 100:23 (parts by weight) Rudder foils, crash bars Ampreg Thixotropic Pregel Resin additive with a grease-like consistency, used primarily as a thixotrope - to be added to low viscosity laminating resins for applications where resin drainage is a concern. Refer to product datasheet Refer to product datasheet. Compatible systems: Ampreg 21 Ampreg 22 Ampreg 26 Vertical and overhead laminating situations, particularly where heavy, open weave fabrics are being used Ampreg Adhesion Promoter A unique resin system formulated to promote the adhesion between epoxy and vinylester resin Ampreg Adhesion Promoter for use with Ampreg 21, 22, and :28 (parts by weight) Existing polyester gelcoats with higher performance epoxy resins supplied by Gurit. Gurit AU / NZ / SEA Product Catalogue 45 GPC_AUNZSEA_30_1118

47 Code Selector Laminating Systems Ampreg 30 Size Units Description Resin and hardener pack sizes Fast Pack kg AMPREG30 R/H FAST 4.662KG PACK Mix Ratio (R:H) (Each) Order Code 1 F SPECIALIST Fast Pack 1.26 kg AMPREG30 R/H FAST 1.26KG PACK 1 F SPECIALIST Standard Pack kg AMPREG30 R/H STANDARD 4.662KG PACK 1 F SPECIALIST Standard Pack 1.26 kg AMPREG30 R/H STANDARD 1.26KG PACK 1 F SPECIALIST Slow Pack kg AMPREG30 R/H SLOW 4.662KG PACK 1 F SPECIALIST Slow Pack 1.26 kg AMPREG30 R/H SLOW 1.26KG PACK 1 F SPECIALIST Extra-slow Pack kg AMPREG30 R/H EXTRA-SLOW 4.662KG PACK 1 F SPECIALIST Extra-slow Pack 1.26 kg AMPREG30 R/H EXTRA-SLOW 1.26KG PACK 100:26 1 F SPECIALIST (parts by Fast Pack kg AMPREG30LRT R/H FAST 1.26KG PACK weight) 1 F SPECIALIST Fast Pack 1.26 kg AMPREG30LRT R/H FAST 4.66KG PACK 1 F SPECIALIST Standard Pack kg AMPREG30LRT R/H STANDARD 1.26KG PACK 1 F SPECIALIST Standard Pack 1.26 kg AMPREG30LRT R/H STANDARD 4.66KG PACK 1 F SPECIALIST Slow Pack kg AMPREG30LRT R/H SLOW 1.26KG PACK 1 F SPECIALIST Slow Pack 1.26 kg AMPREG30LRT R/H SLOW 4.66KG PACK 1 F SPECIALIST Extra-slow Pack kg AMPREG30LRT R/H EXTRA-SLOW 1.26KG PACK 1 F SPECIALIST Extra-slow Pack 1.26 kg AMPREG30LRT R/H EXTRA-SLOW 4.66KG PACK 1 F SPECIALIST Individual resin component size Resin 1000 kg AMPREG30 RESIN 1000KG 100:26 1 F SPECIALIST Resin 219 kg AMPREG30 RESIN 219KG (parts by 1 F SPECIALIST Resin 18 kg AMPREG30 RESIN 18KG weight) 1 F SPECIALIST Use the mix ratio to select recommended hardener component size Fast 174 kg AMPREG30 HARD FAST 174KG 1 F SPECIALIST Fast 19 kg AMPREG30 HARD FAST 19KG 100:26 1 F SPECIALIST (parts by Fast 19 kg AMPREG30 HARD FAST 19KG A/F weight) 1 F SPECIALIST Fast 4.68 kg AMPREG30 HARD FAST 4.68KG A/F 1 F SPECIALIST Standard 174 kg AMPREG30 HARD STANDARD 174KG 1 F SPECIALIST Standard 19 kg AMPREG30 HARD STANDARD 19KG 100:26 1 F SPECIALIST (parts by Standard 19 kg AMPREG30 HARD STANDARD 19KG A/F weight) 1 F SPECIALIST Standard 4.68 kg AMPREG30 HARD STANDARD 4.68KG A/F 1 F SPECIALIST Slow 174 kg AMPREG30 HARD SLOW 174KG 1 F SPECIALIST Slow 19 kg AMPREG30 HARD SLOW 19KG 100:26 1 F SPECIALIST (parts by Slow 19 kg AMPREG30 HARD SLOW 19KG A/F weight) 1 F SPECIALIST Slow 4.68 kg AMPREG30 HARD SLOW 4.68KG A/F 1 F SPECIALIST Extra-slow 174 kg AMPREG30 HARD EXTRA-SLOW 174KG 1 F SPECIALIST Extra-slow 19 kg AMPREG30 HARD EXTRA-SLOW 19KG 100:26 1 F SPECIALIST (parts by Extra-slow 19 kg AMPREG30 HARD EXTRA-SLOW 19KG A/F weight) 1 F SPECIALIST Extra-slow 4.68 kg AMPREG30 HARD EXTRA-SLOW 4.68KG A/F 1 F SPECIALIST AU/NZ AU NZ SPECIALIST = stocked product = stocked in Australia only = stocked in New Zealand only = please contact your local customer support team for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information. Gurit AU / NZ / SEA Product Catalogue 46 GPC_AUNZSEA_30_1118

48 Ampreg 22 Size Units Description Mix Ratio (R:H) (Each) Order Code Resin and hardener pack sizes Fast Pack 4.23 kg AMPREG22 R/H FAST 4.23KG PACK 10 F AU/NZ Standard Pack 5 x 1 kg AMPREG22 R/H STD 5x1KG PACK 1 F SPECIALIST Standard Pack 4.23 kg AMPREG22 R/H STD 4.23KG PACK 10 F AU/NZ Slow Pack 4.23 kg AMPREG22 R/H SLOW 4.23KG PACK 10 F AU/NZ Individual resin component size Resin 1000 kg AMPREG22 RESIN 1000KG 1 F AU/NZ Resin 193 kg AMPREG22 RESIN 193KG 1 F AU/NZ Resin 20 kg AMPREG22 RESIN 20KG 6 F AU/NZ Resin 10 kg AMPREG22 RESIN 10KG 12 F SPECIALIST Use the mix ratio to select recommended hardener component size Fast 900 kg AMPREG22 HARD FAST 900KG 1 F SPECIALIST Fast 180 kg AMPREG22 HARD FAST 180KG 1 F AU/NZ Fast 18 kg AMPREG22 HARD FAST 18KG 100:28 (by weight) 1 F AU/NZ Fast 5.6 kg AMPREG22 HARD FAST 5.6KG 1 F AU/NZ Fast 2.8 kg AMPREG22 HARD FAST 2.8KG 1 F SPECIALIST Standard 900 kg AMPREG22 HARD STD 900KG 1 F SPECIALIST Standard 180 kg AMPREG22 HARD STD 180KG 1 F AU/NZ Standard 18 kg AMPREG22 HARD STD 18KG 100:28 (by weight) 1 F AU/NZ Standard 5.6 kg AMPREG22 HARD STD 5.6KG 1 F AU/NZ Standard 2.8 kg AMPREG22 HARD STD 2.8KG 1 F SPECIALIST Slow 900 kg AMPREG22 HARD SLOW 900KG 1 F AU/NZ Slow 180 kg AMPREG22 HARD SLOW 180KG 1 F AU/NZ Slow 18 kg AMPREG22 HARD SLOW 18KG 100:28 1 F AU/NZ Slow 5.6 kg AMPREG22 HARD SLOW 5.6KG (by weight) 1 F AU/NZ Slow 2.8 kg AMPREG22 HARD SLOW 2.8KG 1 F SPECIALIST Slow 5.6 kg AMPREG22 HARD SLOW 5.6KG A/F 1 F SPECIALIST Extra-slow 900 kg AMPREG22 HARD EXT-SLOW 900KG 1 F AU/NZ Extra-slow 180 kg AMPREG22 HARD EXT-SLOW 180KG 1 F AU/NZ Extra-slow 18 kg AMPREG22 HARD EXT-SLOW 18KG 100:28 (by weight) 1 F AU/NZ Extra-slow 5.6 kg AMPREG22 HARD EXT-SLOW 5.6KG 1 F AU/NZ Extra-slow 2.8 kg AMPREG22 HARD EXT-SLOW 2.8KG 1 F SPECIALIST AU/NZ AU NZ SPECIALIST = stocked product = stocked in Australia only = stocked in New Zealand only = please contact your local customer support team for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information. Gurit AU / NZ / SEA Product Catalogue 47 GPC_AUNZSEA_30_1118

49 Ampreg 26 Size Units Description Mix Ratio (R:H) (Each) Order Code Resin and hardener pack sizes Fast Pack 6.67 kg AMPREG26 R/H FAST 6.67KG PACK 10 F SPECIALIST Slow Pack 6.67 kg AMPREG26 R/H SLOW 6.67KG PACK 10 F SPECIALIST Individual resin component size Resin 216 kg AMPREG26 RESIN 216KG 1 F SPECIALIST Resin 20 kg AMPREG26 RESIN 20KG 6 F SPECIALIST Use the mix ratio to select recommended hardener component size Fast 18 kg AMPREG26 HARD FAST 18KG 1 F SPECIALIST Fast 18 kg AMPREG26 HARD FAST 18KG A/F 100:33 1 F SPECIALIST Fast 6.66 kg AMPREG26 HARD FAST 6.66KG (by weight) 1 F SPECIALIST Fast 6.66 kg AMPREG26 HARD FAST 6.66KG A/F 1 F SPECIALIST Slow 180 kg AMPREG26 HARD SLOW 180KG 1 F SPECIALIST Slow 18 kg AMPREG26 HARD SLOW 18KG 1 F SPECIALIST Slow 6.66 kg AMPREG26 HARD SLOW 6.66KG 100:33 (by weight) 1 F SPECIALIST Slow 6.66 kg AMPREG26 HARD SLOW 6.66KG A/F 1 F SPECIALIST Slow 18 kg AMPREG26 HARD SLOW 18KG 1 F SPECIALIST Foaming Epoxy System F Size Units Description Individual resin component size Mix Ratio (R:H) (Each) Order Code Resin 14.5 kg AMPREG F230-1 RESIN 14.5KG 6 F AU Individual hardener component size (includes Foaming Agent) Slow Pack 3.53 kg Additional Foaming Agent if Required Foaming Agent AMPREG F230-1 HARD SLOW 3.53KG PACK A/F 0.2 kg AMPREG F230-1 FOAMING AGENT 0.2KG Ampreg Thixotropic Pregel 100:23 (by weight) See datasheet Ampreg TP Size Units Description Mix Ratio (R:H) 1 F AU 1 FY SPECIALIST (Each) Order Code Resin 193 kg AMPREG TP RESIN 193KG Refer to product datasheet. Compatible systems: 1 F SPECIALIST Ampreg 21 Resin 20 kg AMPREG TP RESIN 20KG Ampreg 22 Ampreg 26 6 F SPECIALIST Ampreg Adhesion Promoter Ampreg AP Size Units Description Mix Ratio (R:H) Pack 20 kg AMPREG ADHESION PROMOTER 20KG 100:28 (by weight) (Each) Order Code 1 F SPECIALIST AU/NZ AU NZ SPECIALIST = stocked product = stocked in Australia only = stocked in New Zealand only = please contact your local customer support team for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information. Gurit AU / NZ / SEA Product Catalogue 48 GPC_AUNZSEA_30_1118

50 Infusion Systems The PRIME infusion system from Gurit has been used successfully for the single-operation moulding of components ranging from narrow carbon yacht masts, up to 80' yacht hulls and wind turbine blades. PRIME infusion resin has a much reduced viscosity and longer working time, which makes it ideal for infusing very large parts with complex reinforcements in one operation. PRIME epoxy infusion systems are at the forefront of the development of liquid epoxies for "under the bag" infusion processes, such as SCRIMP, RIFT (resin infusion under flexible tooling), and VARTM (vacuum assisted resin transfer moulding). Product Selector System Description Hardener Speed Mix ratio Intended Application PRIME 27 Low viscosity, good mechanical properties, very low exotherm in thick sections Fast Slow Extra Slow High Tg 20 mins 1 hr 4 hrs 3 hrs 20 mins 100:28 (parts by weight) 100:25 (parts by weight) Suitable for the female moulding of large complex components Gurit AU / NZ / SEA Product Catalogue 49 GPC_AUNZSEA_30_1118

51 Code Selector Infusion Systems PRIME 27 Size Units Description Mix Ratio (R:H) (Each) Order Code Individual resin component size Resin 1000 kg PRIME27 RESIN 1000KG 1 F SPECIALIST Resin 214 kg PRIME27 RESIN 214KG 3 F AU Resin 18.6 kg PRIME27 RESIN 18.6KG 6 F AU Use the mix ratio to select recommended hardener component size Fast 900 kg PRIME HARD FAST 900KG 1 F SPECIALIST Fast 180 kg PRIME HARD FAST 180KG 1 F SPECIALIST Fast 19 kg PRIME HARD FAST 19KG 100:28 (by weight) 1 F AU Fast 5.2 kg PRIME HARD FAST 5.2KG 1 F AU Fast 5.2 kg PRIME HARD FAST 5.2KG A/F 1 F SPECIALIST Slow 900 kg PRIME HARD SLOW 900KG 1 F SPECIALIST Slow 180 kg PRIME HARD SLOW 180KG 1 F SPECIALIST Slow 19 kg PRIME HARD SLOW 19KG 100:28 (by weight) 1 F AU Slow 5.2 kg PRIME HARD SLOW 5.2KG 1 F AU Slow 5.2 kg PRIME HARD SLOW 5.2KG A/F 1 F SPECIALIST Extra-slow 900 kg PRIME HARD EX-SLOW 900KG 1 F SPECIALIST Extra-slow 180 kg PRIME HARD EX-SLOW 180KG 100:28 1 F SPECIALIST Extra-slow 19 kg PRIME HARD EX-SLOW 19KG (by weight) 1 F SPECIALIST Extra-slow 5.2 kg PRIME HARD EX-SLOW 5.2KG 1 F SPECIALIST High Tg 178 kg PRIME HIGH Tg HARDENER 178KG 1 F SPECIALIST High Tg 17.6 kg PRIME HIGH Tg HARDENER 17.6KG 100:25 (by weight) 1 F SPECIALIST High Tg 8.8 kg PRIME HIGH Tg HARDENER 8.8KG 1 F SPECIALIST AU/NZ AU NZ SPECIALIST = stocked product = stocked in Australia only = stocked in New Zealand only = please contact your local customer support team for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information. Gurit AU / NZ / SEA Product Catalogue 50 GPC_AUNZSEA_30_1118

52 RTM System PRIME 180 High Tg Resin RTM System PRIME 180 is a two-component toughened epoxy system specifically developed for RTM production of high-quality structural carbon components such as wheel rims, tubs, and structural parts. Low viscosity at low temperatures enables convenient manufacture of complex or thick section laminates. Following a post cure to 180 C, PRIME 180 features a good level of clarity which allows for carbon cosmetic finishes to be achieved directly from moulding. Coated with UV-resistant lacquer ensures long-term UV stability of the finished parts where required. Code Selector Prime 180 Size Units Description Mix Ratio (R:H) (Each) Order Code Resin 200 kg PRIME180 RESIN 200KG 1 F SPECIALIST Resin 20 kg PRIME180 RESIN 20KG 1 F SPECIALIST Hardener 200 kg PRIME180 HARDENER 200KG 1 F SPECIALIST 1:1 (by weight) Hardener 20 kg PRIME180 HARDENER 20KG 1 F SPECIALIST AU/NZ AU NZ SPECIALIST = stocked product = stocked in Australia only = stocked in New Zealand only = please contact your local customer support team for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information. Gurit AU / NZ / SEA Product Catalogue 51 GPC_AUNZSEA_30_1118

53 Multi-Purpose Systems The Ampreg wet laminating range consists of standard, commonly used laminating products, as well as systems with higher strengths and operating temperatures. A complete range of hardeners and modifiers give a wide variety of working times, viscosities and thixotropy. Product Selector System Description Hardener Speed Mix ratio Intended Application Handipack Multi-purpose epoxy, supplied only in a small pack. It is designed for quick repair work and small scale construction jobs. Handipack 15 mins 100:50 (parts by volume) Laminating, coating or as an adhesive or filling compound. Fast 15 mins SP 106 All-purpose epoxy which can be used for gluing, coating, laminating and filling Slow 20 mins 100:18 (parts by weight) Clear coating for wood and other substrates, or for laminating. Extra Slow 35 mins SP 115 Low viscosity, UV stable high clarity laminating system mins 100:33 (parts by weight) Surfboards, Clear parts SP 320 Solvent-free, clear epoxy coating that provides a high clarity, tough finish to whatever it is applied to. Fast Slow 15 mins 30 mins 100:33 (parts by weight) Coating wood to provide a depth of clarity that can only otherwise be achieved with many more coats of a conventional varnish. Eposeal 300 Solvent-based, low viscosity epoxy primer with an extremely low viscosity which ensures that the product achieves rapid and deep penetration of porous surfaces. EP :30 (by weight) Developed primarily for use on wood but can also be used on other materials such as GRP, stone, ferrocement, brick, etc. Gurit AU / NZ / SEA Product Catalogue 52 GPC_AUNZSEA_30_1118

54 Code Selector Handipack Multi-purpose Epoxy System Handipack Size Units Description Mix Ratio (R:H) (Each) Order Code Resin 10 litres HANDIPACK R/H+PUMPS 375ml, BOX OF 5 2:1 (by volume) 1 F SPECIALIST SP106 Multi-purpose Epoxy System SP 106 Size Units Description Mix Ratio (R:H) (Each) Order Code Resin and hardener pack sizes Fast Pack 3.02 kg SP106 RES/HARD FAST 3.02KG PACK 10 F NZ Fast Pack 5 x 1 kg SP106 RES/HARD FAST 5x1KGPACK 1 F SPECIALIST Slow Pack 3.02 kg SP106 RES/HARD SLOW 3.02KG PACK 10 F NZ Slow Pack 5 x 1 kg SP106 RES/HARD SLOW 5x1KGPACK 1 F SPECIALIST Individual resin component size Resin 1000 kg SP106 RESIN 1000KG 1 F SPECIALIST Resin 216 kg SP106 RESIN 216KG 1 F NZ Resin 20 kg SP106 RESIN 20KG 6 F NZ Resin 10 kg SP106 RESIN 10.0KG 12 F SPECIALIST Use the mix ratio to select recommended hardener component size Fast 19.5 kg SP106 HARD FAST 19.5KG 100:18 1 F SPECIALIST Fast 3.6 kg SP106 HARD FAST 3.6KG (parts by 1 F NZ Fast 1.8 kg SP106 HARD FAST 1.8 KG (0.9x2) weight) 1 F SPECIALIST Slow 180 kg SP106 HARD SLOW 180KG 1 F SPECIALIST Slow 19.5 kg SP106 HARD SLOW 19.5KG 100:18 1 F NZ (parts by Slow 3.6 kg SP106 HARD SLOW 3.6KG weight) 1 F NZ Slow 1.8 kg SP106 HARD SLOW 1.8KG (0.9x2) 1 F NZ Extra-slow 19.5 kg SP106 HARD EXTRA-SLOW 19.5KG 100:18 1 F SPECIALIST Extra-slow 3.6 kg SP106 HARD EXTRA-SLOW 3.6KG (parts by weight) 1 F SPECIALIST SP115 UV Stable, High Clarity Epoxy System SP 115 Size Units Description Mix Ratio (R:H) (Each) Order Code Resin and hardener pack sizes Pack 5 x 1 kg SP115 RES/HARD BOX 5x1KG PACK 1 F SPECIALIST Pack 5 kg SP115 RESIN/HARD 5KG PACK 10 F AU Individual resin component size Resin 198 kg SP115 RESIN 198KG 1 F SPECIALIST Resin 20 kg SP115 RESIN 20.0KG 6 F SPECIALIST Use the mix ratio to select recommended hardener component size Hardener 16.5 kg SP115 HARD 16.5KG 1 F SPECIALIST Hardener 6.66 kg SP115 HARD 6.66KG 100:33 (parts by weight) 1 F SPECIALIST Hardener 6.66 kg SP115 HARD 6.66KG A/F 1 F SPECIALIST Gurit AU / NZ / SEA Product Catalogue 53 GPC_AUNZSEA_30_1118

55 SP 320 Multi-purpose Epoxy Coating System SP 320 Size Units Description Mix Ratio (R:H) (Each) Order Code Resin and hardener pack sizes Pack 5 x 1 kg SP320 RES/HARD FAST 5x1KGPACK 1 F SPECIALIST Pack 5 x 1 kg SP320 RES/HARD SLOW 5x1KGPACK 1 F SPECIALIST Pack 4 kg SP320 RESIN/HARD FAST 4KG PACK 10 F SPECIALIST Pack 4 kg SP320 RESIN/HARD SLOW 4KG PACK 10 F SPECIALIST Individual resin component size Resin 20 kg SP320 RESIN 20KG 6 F SPECIALIST Resin 210 kg SP320 RESIN 210KG 1 F SPECIALIST Use the mix ratio to select recommended hardener component size Fast Hardener 6.66 kg SP320 HARD FAST 6.66KG 1 F SPECIALIST Fast Hardener 20 kg SP320 HARD FAST 20KG 1 F SPECIALIST Slow Hardener 6.66 kg SP320 HARD SLOW 6.66KG 100:33 (by weight) 1 F SPECIALIST Slow Hardener 20 kg SP320 HARD SLOW 20KG 1 F SPECIALIST Slow Hardener 6.66 kg SP320 HARD SLOW 6.66KG A/F 1 F SPECIALIST Eposeal 300 Wood Coating Eposeal 300 Size Units Description Mix Ratio (R:H) (Each) Order Code Pack 5 x 1 litres SP300 EPOSEAL RES&HARD 5x1L PACKS 100:30 1 F SPECIALIST Pack 5 litres SP300 EPOSEAL RES&HARD 5L PACK (by weight) 10 F SPECIALIST AU/NZ AU NZ SPECIALIST = stocked product = stocked in Australia only = stocked in New Zealand only = please contact your local customer support team for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information. Gurit AU / NZ / SEA Product Catalogue 54 GPC_AUNZSEA_30_1118

56 Filling and Fairing Gurit s filling and fairing systems for the finishing of component manufacture, offer a range of working times, good sandability and compatibility with a wide range of primers. S-Fill 15 Minute Epoxy Filler System Gurit s S Fill 15 Minute Filler is an epoxy filler system designed for rapid cure at ambient temperature, to allow sanding without clogging at just over an hour after application. As well as rapid cure and good sandability, the system has been developed to offer ease of dispense and mixing, good sag resistance during application, good cured properties. The system offers a simple 1:1 mix ratio, high levels of adhesion, low shrinkage and good thermal and mechanical properties. S-Fair 600 Epoxy Fairing System S-Fair 600 is a simple 1:1 by volume, two component filler designed for filling and fairing large composite and metal structures such as hulls and decks. It can be applied up to a thickness of 35mm on a vertical surface. It is easy to sand and is compatible with a wide range of primers and top coats typically used in the marine market for the finishing of yachts. It is available with two hardeners; Fast and Standard, which enables the customer to tailor the working/cure time to the ambient workshop temperature. Code Selector S-Fill 15 Minute Epoxy Filler System S-Fill 15 Min Size Units Description Mix Ratio (R:H) (Each) Order Code Pack 2 litres S FILL 15 MIN. RES&HARD 2L PACK 10 F SPECIALIST S-Fair 600 Size Units Description Mix Ratio (R:H) Individual resin component size (Each) Order Code Resin 10 litres S FAIR 600 RESIN 10L 12 F SPECIALIST Resin 2.5 litres S FAIR 600 RESIN 2.5L 15 F SPECIALIST Use the mix ratio to select recommended hardener component size Fast 10 litres S FAIR 600 FAST HARDENER 10L 1:1 1 F SPECIALIST Fast 2.5 litres S FAIR 600 FAST HARDENER 2.5L (by volume) 1 F SPECIALIST Standard 10 litres S FAIR 600 STD HARDENER 10L 1:1 1 F SPECIALIST Standard 2.5 litres S FAIR 600 STD HARDENER 2.5L (by volume) 1 F SPECIALIST AU/NZ AU NZ SPECIALIST = stocked product = stocked in Australia only = stocked in New Zealand only = please contact your local customer support team for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information. Gurit AU / NZ / SEA Product Catalogue 55 GPC_AUNZSEA_30_1118

57 Tooling Products As the technical leaders in commercial composite materials, Gurit offers a complete range of composite tooling products. Gurit's tooling product range consists of a tooling paste designed for pattern manufacture and a range of ambient curing mould materials that can be used up to an operating temperature of 160 C. Product Selector Type Product Operating Temperature Description Tooling Pastes T-Paste C Gelcoats T-Gel C Laminating Systems T-Lam C Infusion Resin T-Prime C Infusion Resin T-Prime C T-Paste 70-2 has been designed for customers looking for a fast and reliable way to manufacture patterns and direct moulds. T-Paste 70-2 combined with CNC technology allows more design freedom and improves pattern/direct mould accuracy whilst reducing production processes. Please note: A mixing machine is required to mix and dispense the T-Paste 70-2 product. For more information on suitable mixing machines, please contact Gurit. T-Gel is an epoxy gelcoat system for manufacturing glass or carbon reinforced mould tools. T-Gel is compatible with Gurit s range of 130⁰C / 265⁰F tooling laminating, infusion and repair materials. T-Lam is an epoxy tooling system designed for wet laminating glass or carbon moulds. T-Lam is compatible with T-Prime T-Prime is a low viscosity epoxy tooling system for manufacturing infused glass and carbon moulds. It is compatible with T-Lam laminating. T-Prime 160 is a low viscosity epoxy tooling system for manufacturing infused glass and carbon moulds. Gurit AU / NZ / SEA Product Catalogue 56 GPC_AUNZSEA_30_1118

58 Code Selector Tooling Pastes T-Paste 70-2 Size Units Description Individual resin component size Mix Ratio (R:H) (Each) Order Code Resin 15 kg T-PASTE 70-2 RESIN 15KG (S/S) 1 F SPECIALIST Resin 190 litres T-PASTE 70-2 RESIN 190L 1 F SPECIALIST Use the mix ratio to select recommended hardener component size Hardener 190 litres T-PASTE 70-2 HARDENER 190L 100:100 1 F SPECIALIST Hardener 50 kg T-PASTE 70-2 HARD 50KG (200L DRUM) A/F (by 1 F SPECIALIST Hardener 13.8 kg T-PASTE 70-2 HARDENER 13.8KG (S/S) volume) 1 F SPECIALIST Please note: A mixing machine is required to mix and dispense the T-Paste 70-2 product. For more information on suitable mixing machines, please contact Gurit. Gelcoats T-Gel Size Units Description Mix Ratio (R:H) (Each) Order Code Pack 7.6 kg T-GEL130-1 RES&HARD 7.6KG PACK 100:49 (by weight) 3 F SPECIALIST Laminating Systems T-Lam Size Units Description Mix Ratio (R:H) (Each) Order Code Resin 20 kg T-LAM RESIN 20KG 6 F SPECIALIST 100:40 (by weight) Hardener 8 kg T-LAM HARDENER 8KG 1 F SPECIALIST Infusion Systems T-Prime Size Units Description Mix Ratio (R:H) (Each) Order Code Individual resin component size Resin 185 kg T-PRIME RESIN 185KG 1 F SPECIALIST Resin 12.5 kg T-PRIME RESIN 12.5KG 2 F SPECIALIST Use the mix ratio to select recommended hardener component size Hardener 16.7 kg T-PRIME HARD 16.7KG 1 F SPECIALIST 100:27 (by weight) Hardener 3.4 kg T-PRIME HARD 3.4KG 1 F SPECIALIST T-Prime 160 Size Units Description Mix Ratio (R:H) (Each) Order Code Individual resin component size Resin 200 kg T-PRIME 160 RESIN 200KG 1 F SPECIALIST Resin 20 kg T-PRIME 160 RESIN 20KG 6 F SPECIALIST Use the mix ratio to select recommended hardener component size Hardener 180 kg T-PRIME 160 HARDENER 180KG 1 F SPECIALIST 100:35 (by weight) Hardener 17.5 kg T-PRIME 160 HARD 17.5KG A/F 1 F SPECIALIST Gurit AU / NZ / SEA Product Catalogue 57 GPC_AUNZSEA_30_1118

59 Coatings Gurit s range of coating epoxies is the foundation of our formulated products business. First developed in the early 1980's, specifically to meet the needs of the wooden boat builder/restorer, Gurit's comprehensive range of products is as popular today as when it was first introduced. Our coating products are hard wearing and versatile partners for the multi-purpose systems. Available in both solvent and solvent-free formulations, coatings are suitable for a range of applications, including osmosis treatment, priming, top coating and varnishing. Product Selector System Description Hardener Speed Mix ratio Intended Application CR 3400 Easy to sand, in-mould epoxy surfacing system for epoxy laminates and is designed to be used as the base for the subsequent application of a paint scheme. Standard 5 hours 100:30 (parts by weight) Designed to be backed up with Ampreg laminating systems and Prime infusion systems to give a sand-able surface ready for painting. SP 115 Low viscosity, UV stable high clarity laminating system mins 100:33 (parts by weight) Surfboards, Clear parts SP 320 Solvent-free, clear epoxy coating that provides a high clarity, tough finish to whatever it is applied to. Fast Slow 15 mins 30 mins 100:33 (parts by weight) Coating wood to provide a depth of clarity that can only otherwise be achieved with many more coats of a conventional varnish. Gurit AU / NZ / SEA Product Catalogue 58 GPC_AUNZSEA_30_1118

60 Code Selector In-mould Process Coat CR 3400 Size Units Description Mix Ratio (R:H) Resin and hardener pack sizes (Each) Order Code Pack 6.5 kg CR3400 RES/HARD STD 6.5KG PK 1 F SPECIALIST Individual resin and hardener components Resin 19 kg CR3400 RESIN 19KG 100:30 1 F SPECIALIST Hardener 5.7 kg CR3400 HARD STD 5.7KG (by weight) 1 F SPECIALIST SP115 UV Stable, High Clarity Epoxy System SP 115 Size Units Description Mix Ratio (R:H) (Each) Order Code Resin and hardener pack sizes Pack 5 x 1 kg SP115 RES/HARD BOX 5x1KG PACK 1 F SPECIALIST Pack 5 kg SP115 RESIN/HARD 5KG PACK 10 F SPECIALIST Individual resin component size Resin 198 kg SP115 RESIN 198KG 1 F SPECIALIST Resin 20 kg SP115 RESIN 20.0KG 6 F SPECIALIST Use the mix ratio to select recommended hardener component size Hardener 16.5 kg SP115 HARD 16.5KG 1 F SPECIALIST Hardener 6.66 kg SP115 HARD 6.66KG 100:33 (parts by weight) 1 F SPECIALIST Hardener 6.66 kg SP115 HARD 6.66KG A/F 1 F SPECIALIST SP 320 Multi-purpose Epoxy Coating System SP 320 Size Units Description Mix Ratio (R:H) (Each) Order Code Resin and hardener pack sizes Pack 5 x 1 kg SP320 RES/HARD FAST 5x1KGPACK 1 F SPECIALIST Pack 5 x 1 kg SP320 RES/HARD SLOW 5x1KGPACK 1 F SPECIALIST Pack 4 kg SP320 RESIN/HARD FAST 4KG PACK 10 F SPECIALIST Pack 4 kg SP320 RESIN/HARD SLOW 4KG PACK 10 F SPECIALIST Individual resin component size Resin 20 kg SP320 RESIN 20KG 6 F SPECIALIST Resin 210 kg SP320 RESIN 210KG 1 F SPECIALIST Use the mix ratio to select recommended hardener component size Fast Hardener 6.66 kg SP320 HARD FAST 6.66KG 1 F SPECIALIST Fast Hardener 20 kg SP320 HARD FAST 20KG 1 F SPECIALIST Slow Hardener 6.66 kg SP320 HARD SLOW 6.66KG 100:33 (by weight) 1 F SPECIALIST Slow Hardener 20 kg SP320 HARD SLOW 20KG 1 F SPECIALIST Slow Hardener 20 kg SP320 HARD SLOW 20KG A/F 1 F SPECIALIST Gurit AU / NZ / SEA Product Catalogue 59 GPC_AUNZSEA_30_1118

61 Reinforcements Gurit supplies an extensive range of reinforcements suitable for composite component manufacture and repair. These materials are based on the most widely used fibre types and fibre orientations and incorporate a variety of construction techniques in their manufacture. Our range of Reinforcements is presented by fibre type: Glass Products E Glass Carbon Products Hybrid combinations of the above fibres Then sub-divided into the following categories, based on the orientations of the primary structural fibres / tows : Unidirectional Fabrics A variety of construction styles with all structural fibres generally running at 0 where optimum mechanical properties or local reinforcement is required. The Style is generally Unitex ( UT ) which offers a balance of handling properties. Woven Fabrics A wide range of woven fabrics, available in plain, twill and satin weave formations with fibres at 0 /90. Multiaxial Fabrics Stitched construction with fibres at +/-45 or 0 /90 (Double Bias), 0 /+45 /-45 (Triaxial) and 0 /+45 /-45 /90 (Quadraxial). These products offer excellent mechanical properties, and have optimised fibre spread for high laminate quality. Tapes Narrow (< 200mm) fabric versions of the above Reinforcement Nomenclature E-Glass Products Chopped Strand Mat Carbon Products Aramid Products Gurit AU / NZ / SEA Product Catalogue 60 GPC_AUNZSEA_30_1118

62 The supply of dry reinforcements is subject to a minimum single roll quantity per style for most items. Smaller quantities of fabric are available from Gurit s network of distributors, subject to cutting and handling charges. This catalogue describes Gurit s standard range of reinforcement materials. If your preferred reinforcement is not listed in the following pages, please contact Gurit, as we can offer alternative weaves, weights, fibres and fibre combinations in most styles. Non-standard items may be subject to limited availability. Width availability may change from time to time. For further information, confirmation of stock levels and technical advice on Gurit s reinforcement materials - please contact your local Customer Support Team. Reinforcement Nomenclature 1st Letter: General Construction of Reinforcement Fabric WR = Woven rovings - (glass) R = Woven fabric - yarn (glass) or tows (carbon) X = Double bias (±45 ) stitched fabric Q = Quadraxial (0 /90 /±45 ) stitched fabric Y = Triaxial (0 /±45 ) stitched fabric UT = Unitex woven low-crimp unidirectional fabric UF = Unifibre non-woven unidirectional fabric 2nd Letter: Fibre Type (or Major Component in Hybrid) E = E glass S = S glass (or R glass) C = Carbon 3rd letter: Final digit: 2nd Fibre Type - Minor Component in Hybrid (as above); also: (when present) T = Tape version Identifier to distinguish otherwise similar fabrics. Suffix letter: For woven fabrics, the following suffixes indicate the weave: P = Plain T = 2x2 twill S = 3x1 twill T4 = 4x4 twill Hx = Satin (where x = harness number) C = Crowsfoot B = Basket Q = Quadran Example: UT-C300/500 UD carbon in Unitex Nominal weight 300g/m2 Width 500mm Gurit AU / NZ / SEA Product Catalogue 61 GPC_AUNZSEA_30_1118

63 Code Selector E-Glass Products Description Width (mm) Length (lm) Quantity (m 2 ) Order Units Order Code Uni-directional Reinforcement Fabrics UT-E m 2 R NZ UT-E m 2 R AU/NZ UE m AU/NZ UE m AU/NZ UE m NZ 0/90 Woven Yarn RE86P m 2 R AU/NZ RE165T m 2 R AU/NZ RE m AU/NZ RE295H m 2 R AU RE301H8D m 2 R AU RE m NZ 0/90 Woven Roving Yarn WRE m NZ WRE m NZ ±45 Double Bias Stitched Fabrics XE m 2 R NZ XE m 2 R AU XE m 2 R AU XE m 2 R AU/NZ XE m AU/NZ XE m B AU/NZ XE m AU/NZ With CSM Backing XE435M m AU/NZ XE602M m AU/NZ /±45 Double Bias Stitched Tapes XE lm 4363 NZ XE lm 4366 NZ XE lm 4364 NZ XE lm 4403B NZ XE lm 4406B NZ XE lm 4409B NZ XE lm 4433 NZ XE lm 4436 NZ XE lm 4438 NZ Gurit AU / NZ / SEA Product Catalogue 62 GPC_AUNZSEA_30_1118

64 Description Width (mm) Length (lm) Quantity (m 2 ) Order Units Order Code /±45 Double Bias Stitched Tapes cont d With CSM Backing XE602M lm 4543 NZ XE602M lm 4546 NZ 0/90 Biaxial Stitched Fabric BE m AU/NZ BE m AU/NZ BE m NZ With CSM Backing BE630M m NZ BE825M m NZ 0 /±45 Triaxial Stitched Fabric YE810U m NZ ZE920U m NZ 0 /90 /±45 Quadraxial Stitched Fabric QE m AU/NZ QE m AU/NZ QE m AU/NZ Matline Description Width (mm) Length (lm) Quantity (m 2 ) Order Units Order Code M m NZ M m NZ M m NZ AU/NZ AU NZ SPECIALIST = stocked product = stocked in Australia only = stocked in New Zealand only = please contact your local customer support team for product availability Gurit AU / NZ / SEA Product Catalogue 63 GPC_AUNZSEA_30_1118

65 Chopped Strand Mat Description Width (mm) Length (lm) Quantity (kg) Order Units Order Code CSM225-E kg 4721 NZ CSM300-P kg 4738 NZ CSM300-E kg 4737 NZ CSM450-E kg 4747 NZ CSM450-P kg 4752 NZ CSM600-P kg 4765 NZ Carbon Products Description Width (mm) Length (lm) Quantity (m 2 ) Order Units Order Code Uni-directional Reinforcement Fabrics UT-C m 2 R AU/NZ UT-C m AU/NZ UT-C m AU/NZ Unidirectional Reinforcement Tapes Non-crimp plain weave type (Unix) in carbon. Typical uses for these tapes are in the local reinforcement of predominantly glass composite structures, where the load paths are known. RUCT Roll R AU RUCT Roll 6353G AU 0/90 Woven Reinforcements Gurit reserves the right to interchange 1000mm & 1270mm based upon availability Woven fabrics produced from HSC. RC155T m 2 R AU/NZ RC155T m 2 R AU RC200T m 2 R AU/NZ RC200P m 2 R AU/NZ RC200(WS)T m 2 R AU RC241T m 2 R AU/NZ RC600T m AU ±45 Double Bias Stitched Fabrics XC m 2 R AU/NZ XC m 2 R AU/NZ XC m 2 R AU/NZ XC m A AU/NZ Gurit AU / NZ / SEA Product Catalogue 64 GPC_AUNZSEA_30_1118

66 Description Width (mm) Length (lm) Quantity (m 2 ) Order Units Order Code Carbon Braided Sox CSOX lm 6405 NZ CSOX lm 6410 NZ ±45 Carbon Double Bias Stitched Tapes XC Roll 6252A NZ XC Roll 6249A NZ Aramid Products Description Width (mm) Length (lm) Quantity (m 2 ) Order Units Order Code 0/90 Woven RA175P m 2 R NZ RA320HS m NZ AU/NZ AU NZ SPECIALIST = stocked product = stocked in Australia only = stocked in New Zealand only = please contact your local customer support team for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information. Gurit AU / NZ / SEA Product Catalogue 65 GPC_AUNZSEA_30_1118

67 Ancillary Products In order to assist in the use of the wide range of materials manufactured and supplied by Gurit, a range of Ancillary Products are also available. These have been refined over many years to enable users to handle products safely and to obtain the very best results from Gurit materials. The Ancillary Products are grouped together into three main categories: Filler Powders A range of filler powders which are designed to modify the properties of some of the Gurit liquid solvent-free resin systems, and so create resin mixes for use as fillers and adhesives. The fillers form three distinct categories: hollow spheres, short fibres, and flow modifiers. Hollow spheres Increase the volume and reduce the density of any resin system and are used to make adhesive mixes and filling & fairing mixes. Microballoons: Brown microsphere filler powder used to make glues or paste fillers. Glass Bubbles: White microsphere filler powder used to make glues or paste fillers. Short Fibres For adding strength to a resin and hardener mix used as a structural adhesive, short reinforcing fibres are often added which act in a similar strengthening way to the long reinforcing fibres used in composite construction. Microfibres: Cellulose fibres used to make adhesive mixes. Flow Modifiers The most common material for modifying the flow properties of a resin mix is colloidal silica. This is a very fine powder which is added in conjunction with other fillers to thicken mixes and reduce their flow on vertical surfaces (increase thixotropy). Colloidal Silica: Fine, anti-sag, filler powder. Use in combination with other filler powders. Solvents A range of solvents for cleaning tools and surfaces. Due to the very different chemistry of some of the Gurit products from each other, it is important that the correct solvents are selected for the intended application. Pigments A range of pigments that can be added to some Gurit products to adjust the colour / visual appearance. Please contact Gurit Technical Support for further guidance on the correct usage / addition of pigments which can vary by product. Application, Processing and Sundry items Pumps and dispense equipment, application and processing items and pigments. Gurit AU / NZ / SEA Product Catalogue 66 GPC_AUNZSEA_30_1118

68 Code Selector Filler Powders Description Approximate Volume Size Units Order Code Hollow spheres MICROBALLOONS 0.3KG 3 litres 0.3 kg A AU MICROBALLOONS 5KG 50 litres 5 kg A SPECIALIST MICROBALLOONS 12KG 120 litres 12 kg A SPECIALIST GLASS BUBBLES 0.12KG litres (min order 5) 0.12 kg A SPECIALIST GLASS BUBBLES 0.12KG 2-3 litres 0.3 kg A NZ GLASS BUBBLES 0.12KG litres 5 kg A SPECIALIST Short Fibres MICROFIBRES 0.5KG 5 litres 0.5 kg A SPECIALIST MICROFIBRES 5KG 50 litres 5 kg A SPECIALIST MICROFIBRES 10KG 100 litres 10 kg A SPECIALIST Flow Modifiers COLLOIDAL SILICA 0.25KG 5 litres 0.25 kg A AU/NZ COLLOIDAL SILICA 2.5KG 50 litres 2.5 kg A SPECIALIST COLLOIDAL SILICA 10KG 200 litres 10 kg A SPECIALIST Cleaning Solvents Description Application Size Units Order Code SP FAST EPOXY SOLVENT 5L Surface degreaser 5 litres A SPECIALIST SP STD EPOXY SOLVENT 5L By-product remover 5 litres A SPECIALIST Please note, Gurit s solvent-free epoxies such as SP 106, Ampreg 22 should never have solvent added to them to thin them down. If a lower viscosity, thinner epoxy product is required then this should be achieved by gentle warming of the product, or warming the surface to which the product is applied. Note that any extra heat applied will also accelerate the product s rate of cure. Alternatively, there may be a different Gurit epoxy product with a more suitable viscosity for the intended application. For the correct solvent for a given application, please see the resin systems data sheet for details. Pigments Description Colour Size Units Order Code SP PIGMENT WHITE 0.5KG White 0.5 kg A SPECIALIST SP PIGMENT BLACK 0.5KG Black 0.5 kg A SPECIALIST AU/NZ AU NZ SPECIALIST = stocked product = stocked in Australia only = stocked in New Zealand only = please contact your local customer support team for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information. Gurit AU / NZ / SEA Product Catalogue 67 GPC_AUNZSEA_30_1118

69 Code Selector Continued Application, Processing and Sundry items Volume Description Size Units Order Code Dispense Guns 900ml Pneumatic / PC Cox Gun, PPA 1 EACH K SPECIALIST 600ml Pneumatic / PC Cox Gun, PPA 300A 1 EACH K SPECIALIST 400ml* Manual / Metix Gun DM EACH K SPECIALIST 400ml* Pneumatic / Metix Gun DM EACH K SPECIALIST 400ml* Sintex Dual Cartridge Gun 400ml 1 EACH K AU/NZ Dispense Gun Mix Heads 900ml Box of 20 x 16mm, 20 Element round mix head (screw connection) 1 EACH A SPECIALIST 600ml Box of 20 x 10.7mm, 20 Element square mix head (screw connection) 1 EACH A AU/NZ 400ml* Box of 20 x 10.7mm, 20 Element square mix head (screw connection) 1 EACH A AU/NZ *Suitable for both 1:1 and 2:1 Cartridge formats Description Comments Size Units Order Code Miscellaneous Dispense Equipment 10cc Syringe* 1cc graduations 1 EACH A SPECIALIST 50cc Syringe* 10cc graduations 1 EACH A SPECIALIST 25 litre Drum Tap Small plastic 1 EACH K SPECIALIST 200 litre Drum Tap Large plastic 1 EACH K SPECIALIST Plastic Mini-pump Pair Mini-pump pair for any 1kg pack 1 EACH K SPECIALIST Pump Sets Please contact Gurit Customer Support for pump set availability Application and Processing Items Reusable Mixing Pots 0.5L (0.8L max) Minimum order of EACH A SPECIALIST Clear lid for Mixing Pots For use with A EACH A SPECIALIST Mixing Sticks Box of 100 sticks 1 EACH A SPECIALIST * Syringes should be washed with warm water and a mild detergent, then flushed with clean water and allowed to air dry before use. AU/NZ AU NZ SPECIALIST = stocked product = stocked in Australia only = stocked in New Zealand only = please contact your local customer support team for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information. Gurit AU / NZ / SEA Product Catalogue 68 GPC_AUNZSEA_30_1118

70 Vacuum Consumables The range of vacuum consumables has been designed for use in a wide range of vacuum bag processes. Such processes include autoclave/ prepreg curing, wet lay-up, low temperature oven/ prepreg processes and infusion processes. Gurit has selected a specific range of products which are particularly suitable for working with Gurit's epoxy prepreg and laminating systems where they are regularly used for the curing of large composite structures at temperatures up to 150 C. Sealant Tapes Sealant tape is used to seal the tool to the vacuum bag in order to provide an airtight seal. The tapes are tacky to ensure a positive seal is achieved against a variety of tool surfaces. Peel Plies Peel plies are fine weave fabrics which are applied to the laminate stack to provide a clean, contaminant-free textured surface, suitable for secondary bonding, filling or painting. Our range is green in colour. Release Films Release films are used to separate and release the laminate from the vacuum stack following the cure of the component. These films are perforated to allow a certain bleed of resin from the laminate into a breather material such as Econoweave 44W. Breather Fabrics / Meshes Breather fabrics are used to absorb excess resin (bleed) from a laminate which is being cured under vacuum. The fabric also allows the air, or any volatiles, to be evacuated prior to, and during the cure cycle. Vacuum Bagging Films Vacuum bagging films are used to effectively seal the whole of the area of the composite laminate to be cured. Self Adhesive Mould Release Materials Self-adhesive mould release materials are used to cover moulds as an effective alternative to the use of release wax or liquids. Flash / Release / Shrink Tapes Flash tapes are used to locate vacuum consumable materials or to mask off areas to be painted, sanded or to prevent damage. Some of these tapes have release qualities so they can be used as tool repair tapes if necessary. Shrinktapes are used to consolidate specific components. For further information on product availability contact your local Gurit office. Gurit AU / NZ / SEA Product Catalogue 69 GPC_AUNZSEA_30_1118

71 Peel Plies Description Order Code PP Peelply Red Stripe 85 gsm x 1270mm 8052A AU PP A Peelply Red Stripe 85 gsm x 1000mm V AP AU PP Peelply Tracer Red Stripe 80 x 150mm 8056A NZ PP Peelply Tracer Red Stripe 80 x 200mm 8057A NZ PP Peelply Tracer Red Stripe 80 x 250mm 8058A NZ PP Peelply Tracer Red Stripe 80 x 760mm 8051A NZ PP Peelply Tracer Red Stripe 80 x 1270mm 8052A NZ Release Film Description Order Code RFHT25B(P3)-1525 Perforated Release Film Blue 25mu P3 x 1525mm 8420 NZ RFHT25B(P31)1525 Perforated Release Film Blue 25mu P31 x 1525mm 8426 NZ RFHT25B(P6)-1525 Perforated Release Film Blue 25mu P6 x 1525mm 8425 NZ RFMT25B(P16)-1525 Perforated Release Film Blue WL mu P16 x 1525mm 8452 NZ RFMT50G(P)-1525 Perforated Release Film Green 50mu P x 1525mm 8450 NZ RFMT50G(P6)1525 Perforated Release Film Green (Dahlar) 50mu P6 perf x 1525m 8451 NZ RF Release Film Non Perforated 50mu x 2000mm 8410 NZ RFNP Release Film Perforated 50mu x 2000mm 8411 NZ WL3600 MP22 WL3600 MP22 Perforated x 1200mm V AP AU WL3600 P3 WL3600 P3 Perforated x 1200mm V AP AU WL3600-P Release Film P98 Perforated x 1200mm Low Temperature V AP AU RFMT30(P3)-1300 Perforated Release Film Blue 30mu 1300mm P3 Perforation 8455 AU RFMT30(P31)1500 Perforated Release Film Blue 30mu 1500mm P31 Perforation 8456 AU RFMT30B(P3)1500 Perforated Release Film Blue 30mu 1500mm (Perf 0.4mm dia, 6mm spacing) 8454 NZ Vacuum Bagging Films Description Order Code VFHT50G-4060 Vacuum Bag Film Green 50 Micron x 4060mm 8259 NZ VFHT75G-2030 Vacuum Bag Film Green 75Micron x 2030mm 8278 NZ VFHT75G-4060 Vacuum Bag Film Green 75Micron x 4060mm 8281 NZ VFSL37G-1525 Stretchlon x 60" x 1525mm 8205 NZ VF Vacuum Film 125mu x 4000mm 8210 NZ VFHT50G-2794 Vac Bag Film Green 50 Micron x 2794 V AP AU VFHT50R-4060 Vacuum Bag Film Red 50 Micron x 4060mm 8261 AU VFHT50Y-4570 Vacuum Bag Film Yellow 50 Micron x 4570mm 8260 NZ VFHT75Y-2000 Vacuum Bag Film Yellow 75 Micron x 2000mm 8277 NZ VFHT75Y-4000 Vacuum Bag Film Yellow 75 Micron x 4000mm 8280 NZ Gurit AU / NZ / SEA Product Catalogue 70 GPC_AUNZSEA_30_1118

72 Mould Release Materials Description Order Code PTFE-RF1000 V AU/NZ Breather Fabrics/Meshes Description Order Code BF Breather 150g/m² x 1500 wide (150m²/roll) 8313 NZ BM5-910 Mesh Breather / Bleeder x 910mm (45.5m² roll) 8340 NZ BFW Breather 150g/m² x 1520mm wide 8312 AU TMS-G-1042 Hi Performance Resin Transfer Medium mm 8956 NZ Sealant Tapes Description Order Code ST3Y-12 Sealant Tape 3.2mm x 12.7mm Yellow, 7.62LM/roll 8535 NZ ST3B-12 AT90B SEALANT TAPE 30x15M ROLL V AP NZ ST3B-12 LG150 Sealant Tape 15m x 12mm x 3mm (20x15M Roll / Ctn) 8537 AU ST3.5G-12.5 LG2000 Sealant Tape 8m X 12.5mm x 3.5mm (24x8M Roll / Ctn) 8538 AU Other Description Order Code VV-401C Vac Valve 401C In bag connections 8922 NZ ATAC2 Airtac 2 Spray Contact Adhesive 8520 NZ GrapPowder.75 Graphite powder 0.75kg A AU FB1-25 Flashbreaker 1/25mm V AU/NZ FB1-50 Flashbreaker 50mm High Temp Pressure 8515 NZ HST Heat Shrink Tape 32mm 8543 NZ HST Heat Shrink Tape 64mm 8545 NZ LFT Lay Flat Tubing.003 gauge x 178mm (228lm/roll) 8224 NZ LFT Lay Flat Tubing.003 gauge x 304.8mm (305 lm/roll) 8227 NZ LFT Lay Flat Tubing.003 gauge x 457mm (305lm/roll) 8232 NZ LFT Lay Flat Tubing.003 gauge x 686mm (228lm/roll) 8233 NZ PTFE 2-50 High Temp PTFE Pressure Sensitive Tape.002 x 2" 8505 NZ QD500TF Quick Disconnects with Viton O-Rings 1/4" (threaded) 8927 NZ AU/NZ AU NZ SPECIALIST = stocked product = stocked in Australia only = stocked in New Zealand only = please contact your local customer support team for product availability For indicative purposes only, product availability subject to change at any time. Please contact Gurit Customer Service team for further information. Gurit AU / NZ / SEA Product Catalogue 71 GPC_AUNZSEA_30_1118

73 Gurit Structural Engineering Gurit s engineering team has specialised in composite structures for over 35 years, with a heritage that was founded in some of the most demanding marine applications on the planet. Early on our design and analysis tools were honed on high level race boats, composite superyachts, high speed motor yachts and military vessels. Gurit now has considerable experience with innovative engineering of many different structures, across an ever expanding range of applications, with our focus being on the design of efficient and safe composite structures regardless of the application Industrial and Product design Marine Transportation Civil and Architectural structures Renewable energy Gurit offers substantial experience and capacity in composites engineering with design offices in New Zealand, UK and France comprising 40 engineers and designers. The team incorporates finite element specialists experienced in the analysis of advanced composite structures and engineers experienced in production detailing and through build support. From concept through to detailed analysis and production support, and right through to inservice monitoring of structures, the Gurit engineering team offers a full spectrum of engineering design capabilities Engineering Tasks include: Conceptual design Laminate design & optimisation Analysis using in-house tools FEA static, nonlinear and dynamic analysis including crash simulation CAD On-site engineering support On site data acquisition and monitoring Certification authority liaison Mechanical testing of materials in our accredited testing lab Weight and cost estimates and optimisation Design review, peer review, inspection and repair specifications Software utilised in-house includes: Proprietary specialist software AutoCAD SolidWorks Rhino Patran/Nastran with laminate modeller Gurit AU / NZ / SEA Product Catalogue 72 GPC_AUNZSEA_30_1118

74 Gurit Mechanical Testing Key to the design of composite materials is understanding how the material behaves and performs. Gurit engineering runs and internationally accredited mechanical testing laboratory specialised in FRP composites for our customers. Mechanical testing can be done for a number of purposes: design certification and third party approval of as-built properties post build surveyors, forensics or to establish repair specifications establish baseline materials properties for design research and development to test new idea, validate concepts and build methods Key to the success of this laboratory is that it is run by experienced composite design engineers who are available to help you to design and appropriate materials test program for your needs. This includes design of test specimens for standard programs, design and implementation of customised and specific tests, interpretation and reporting on the results to enable them to be implemented into your project or process. In addition to the mechanical testing at the Auckland site the test lab is also linked with Gurit's extensive test lab in the UK for a variety of testing for Tg, fibre weight fraction (by burnoff and microscopy) environmental exposures, as well as links to universities and commercial laboratories for specialised testing. Mechanical testing laboratory set up with: Instron UTM 3369 with an kN load cell. A-grade annual calibration report available upon request LVDT Extensometer Strain gauge controller Gurit provides accredited testing to the following standards: ASTM D3039M-08 Tensile testing of polymer matrix composite materials ASTM D790 07e1 Single Skin Flexure (three point bend) ASTM D Single Skin Flexure (four-point bend) ASTM D and ASTM D (2008) Single and Double lap shear of adhesive joints ASTM D (2006) Apparent interlaminar shear strength by short beam flexure ASTM D Bearing response of polymer matrix composites Gurit AU / NZ / SEA Product Catalogue 73 GPC_AUNZSEA_30_1118

75 a) Tensile tests in accordance with the following standards up to 50 kn force ASTM C 297/C 297M-04 Flatwise tensile strength of sandwich constructions ASTM D Tensile and tensile adhesion properties of rigid cellular plastics ASTM D 3039/D 3039M-08 Tensile properties of polymer matrix composite materials ISO 527-5:2009 Plastics Determination of tensile properties Part 5: Test conditions for unidirectional fibre-reinforced plastic composites (b) Compression tests in accordance with the following standards up to 50 kn force ASTM C 365/C 365M-05 Flatwise compressive properties of sandwich cores ASTM D Compressive properties of rigid plastics ASTM D a Compressive properties of rigid cellular plastics ASTM D 6641/D 6641M-09 Compressive properties of polymer matrix composite materials using a combined loading compression (CLC) test fixture ISO 844:2007 Rigid cellular plastics Determination of compression properties (c) Flexure and stiffness in accordance with the following standards AS Determination of the initial ring stiffness of glass filament reinforced plastic pipes (constant deflection test only) ASTM D e1 Flexural properties of unreinforced and reinforced plastics and electrical insulating materials ASTM D 2344/D 2344M-00(2006) Short-beam strength of polymer matrix composite materials and their laminates ASTM D (2008) Determination of external loading characteristics of plastic pipe by parallel-plate loading ASTM (2008) e1 Flexural properties of unreinforced and reinforced plastics and electrical insulating materials by four-point bending ASTM D 7249/D 7249M -06 Facing properties of sandwich constructions by long beam flexure ASTM D 7250/D 7250M-06 Determining sandwich beam flexural and shear stiffness (d) Shear strength in accordance with the following standards ASTM C393/C 393M-06 Core shear properties of sandwich constructions by beam flexure ASTM Strength properties of adhesives in shear by tension loading of single-lap-joint laminated assembles ASTM (2008) Strength properties of double lap shear adhesive joints by tension (e) Density and specific gravity in accordance with the following standards ASTM C 271/C 271M- 05 Density of sandwich core materials (f) Constituent tests in accordance with the following standards ASTM D Constituent content of composite materials (weight fraction test only) (h) Other tests ASTM D 5961/D 5961M-08 Bearing response of polymer matrix composite laminates (ultimate bearing strength test only) Gurit AU / NZ / SEA Product Catalogue 74 GPC_AUNZSEA_30_1118

76 Other custom and speciality testing: Hoop Tensile Strength of Pipe ISO 8521 Longitudinal Tensile Strength of Pipe ISO 8513 AS (Plastic roof and wall cladding materials determination of impact resistance) Our accreditations: Gurit AU / NZ / SEA Product Catalogue 75 GPC_AUNZSEA_30_1118