"A" Coil and Slab Coil Engineering & Specification Guide

Transcription

1 SG-HAC-18 November 2008 "A" Coil and Slab Coil Engineering & Specification Guide Contents: Page #: Features 2 Nomenclature 3 Uncased "A" Coil Dimensions... 4 Cased "A" Coil Dimensions 7 "A" Coil Airflow Data..10 Horizontal Coil Dimensions & Air Flow Data 13 Coil Weights 14 Pallet Quantities 15 Product improvement is a continuous process at Advanced Distributor Products. Therefore, product specifications are subject to change without notice and without obligation on our part. Please contact your ADP representative or distributor to verify details West Park Place Blvd., Stone Mountain, GA adp.feedback@adpnow.com 1

2 General Features: : Patented lanced fin design. : No hassle 5 year warranty. : R-22, R-410A, AC & Heat Pump compatible. : All coils have durable packing with bar coded labels on the box. : Screw-on expansion valves available factory installed or as a field installed kit. : Coils are air pressure tested at 500 PSI, leak tested with Helium, sealed with rubber plugs and then charged with dry air. : Florator piston assemblies are external to the unit for easy piston change out and/or TV installation, when florator option is ordered. : Refrigerant connections are 3/8" ODF liquid and 3/4" ODF ("A" coil MBTUH) or 7/8" ODF ("A" Coil MBTUH & all HH Coils) suction. "A" Coil Specific Features: : Stiff cabinets : Optional painted cabinets. : Corrosion resistant coil header plates. : All "A" coils are upflow or downflow capable. : Cabinet insulation hold down tabs for easy drain pan removal. : Interlocking doors reduce air leakage and allow for easy access. : Enhanced refrigerant pipe grommets: secure, tight, and easy to install. : Non-captive refrigerant lines with long stubs make for easy installation. : All multi-position coils are upflow, downflow, and left or right airflow capable. : Dual 3/4" FPT condensate drains on front-left and front-right side of drain pans. : UV resistant drain pans are molded of high temperature (450 deg. F) engineered polymer. : Cased coils have heavy gauge embossed galvanized cabinets fully lined with 5/8" foil faced insulation. : Microban, antimicrobial additive and HydroTEC low water retention drain pan prevent mold and mildew. : Expansion valve with improved temperature sensing: 1. Mounted inside cabinet to prevent external sweating 2. Bulb clamped standard factory installed 3. Wrapped bulb optional factory installed WARNING : Face velocity above 350 ft/min. is not recommended for downflow or counterflow applications due to potential water blow-off. 2

3 Nomenclature A-Coil H A C B AP Cabinet Piston Size H= Embossed *AP = TV Access Port A= Armstrong AW= TV Access Port w/bulb Wrap D= Ducane R-22 R-410A G= ICP 41 = 12 MBTUH 41 = 12 MBTUH J= Goodman/Amana 53 = 18 MBTUH 49 = 18 MBTUH P= Carrier/Bryant/Payne 59 = 24 MBTUH 53 = 24 MBTUH R= Rheem/Ruud 67 = 30 MBTUH 59 = 30 MBTUH T= Trane/American Std. 73 = 36 MBTUH 67 = 36 MBTUH Y = York 80 = 42 MBTUH 73 = 42 MBTUH 84 = 48 MBTUH 76 = 48 MBTUH Slab Number 93 = 60 MBTUH 93 = 60 MBTUH Note: Piston will always be Metering Device sized to match the nominal 1 = Piston (R-410A) Btu rating of the coil. 2 = Piston (R-22) 3 = Bleed A/C TV (R-22) 4 = Non Bleed A/C TV (R-22) 5 = Non Bleed HP TV (R-22) Product Code 6 = Non Bleed A/C TV (R-410A) 00 = Right-hand Uncased 9 = Non Bleed HP TV (R-410A) 01 = Right-hand Cased 04 = Left-hand Uncased Nominal MBTUH 05 = Left-hand Cased 20 = Right-hand Cased Multi-position Cabinet Depth 22 = Left-hand Cased Multi-position A = Uncased D = 21.00" C = 20.50" E = 21.50" Cabinet Height 00 = Uncased Width 12 = 12.50" (Cabinet heights not a selectable 130 = 13.00" 16 = 16.50" option, see dimension sheets) 132 = 13.25" 18 = 18.50" 135 = 13.50" 20 = 20.50" 137 = 13.75" 25 = 25.50" 140 = 14.00" Up to 26.75", depending di on size. 27 = 27.50" 29 = 29.50" Cabinet Upper Notch Distance between top flange and front A = Uncased of cabinet. B =.75" (standard) C = 1.25" (counterflow) Note: If cabinet upper notch is anything other than D = 1.75" standard (B), cabinet height must be increased to E = 2.25" etc the next offered size. *Standard on factory installed TVs. Optional for piston models. Horizontal Slab H H A A H= Embossed Florator Piston Size *AP = TV Access Port Horizontal Coil R-22 R-410A 41 = 12 MBTUH 41 = 12 MBTUH Slab Number 53 = 18 MBTUH 49 = 18 MBTUH 59 = 24 MBTUH 53 = 24 MBTUH Metering Device 67 = 30 MBTUH 59 = 30 MBTUH 1 = Piston (R-410A) 73 = 36 MBTUH 67 = 36 MBTUH 2 = Piston (R-22) 80 = 42 MBTUH 73 = 42 MBTUH 3 = Bleed A/C TV (R-22) 84 = 48 MBTUH 76 = 48 MBTUH 4 = Non Bleed A/C TV (R-22) 93 = 60 MBTUH 93 = 60 MBTUH 5 = Non Bleed HP TV (R-22) Note: Piston will always be 6 = Non Bleed A/C TV (R-410A) sized to match the nominal 9 = Non Bleed HP TV (R-410A) btu rating of the coil. Nominal MBTUH Product Code 02 = Cased "H" Cabinet Depth A = 10" Note: Fixed, not a selectable option. Cabinet Opening Height 17 = 17 1/4" Cabinet Opening Width 21 = 21 1/4" 185 = 18 5/8" Note: Note: 225 = 22 5/8" Cabinet opening is determined Cabinet opening is 265 = 26 5/8" by coil code. determined by coil code. 305 = 30 5/8" (not a selectable option) (not a selectable option) 365 = 36 5/8" 425 = 42 5/8" A = Bi-directional airflow *Standard on factory installed TVs. Optional for piston models. 3

4 Uncased Dimensions Available Drain Pan Width (uncased coil width) Pan Coil 13" 14" 15.5" 17" 20" 20.5" 25.12" Depth Height HA01*18 HA01* " 11" HA02*18 HA02* " 13" HA02*30 HA03*24 HA03* " 15" HA03*36 HA04*30 HA04* " 17" HA04*42 HA05*30 HA05*36 HA05* " 19" HA05*48 HA06*36 HA06* " 21" HA06*48 HA07*36 HA07*42 HA07* " 25" HA07*60 HA08*18 HA08* " 11" HA09*18 HA09* " 13" HA09*30 4

5 Uncased Dimensions (cont.) Available Drain Pan Width (uncased coil width) Pan Coil 13" 14" 15.5" 17" 20" 20.5" 25.12" Depth Height HA10*24 HA10* " 15" HA10*36 HA11* " 17" HA11*42 HA12*36 HA12* " 19" HA12*48 HA13*36 HA13* " 21" HA13*48 HA14*36 HA14* " 23" HA14*48 HA14*60 HA15*36 HA15* " 25" HA15*48 HA15*60 HA91*42 HA91*48 20" 25" HA91*60 HE20*18 HE20* " 11" HE21*18 HE21* " 13" HE21*30 HE22*24 HE22* " 15" HE22*36 HE23*24 HE23*30 HE23* " 17" HE23*42 HE24*36 HE24* " 19" HE24*48 HE25*36 HE25*42 HE25* " 21" HE26*42 HE26* " 23" HE26*60 *Represents Metering Device. See Nomenclature. 5

6 Uncased Dimensions (Cont.) Available Drain Pan Width (uncased coil width) Pan Coil 13" 14" 15.5" 17" 20" 20.5" 25.12" Depth Height HE27*42 HE27* " 25" HE27*60 HE30*18 HE30* " 11" HE31*18 HE31* " 13" HE31*30 HE32*24 HE32* " 15" HE32*36 HE33*24 HE33* " 17" HE33*36 HE34*30 HE34* " 19" HE34*42 HE35*36 HE35* " 21" HE35*48 HE36*36 HE36*42 HE36* " 23" HE36*60 HE37*36 HE37*42 HE37* " 25" HE37*60 HE41*42 HE41*48 20" 25" HE41*60 HE47*24 HE47* " 27" HE47*36 HE48*36 HE48*42 HE48* " 27" HE48*60 HE49*42 HE49* " 25" HE49*60 HE50*42 HE50* " 27" HE50*60 HE51*42 HE51* " 29" HE51*60 *Represents Metering Device. See Nomenclature. 6

7 Cased Dimensions Cabinet Width in 1/4" increments Depth Height Up/Downflow Multi-position 1/2" increments Std. Multi-position HA01*18 HA01* " " 13.50" " 20.50" " 12.5" 16.5" HA02*18 HA02*24 HA02*30 HA03* " " 13.50" " 20.50" " 16.5" 16.5" HA03* " " 13.50" " 20.50" " 16.5" 16.5" HA03* " " 14.50" " HA04* " " 13.50" " HA04* " " 14.50" " 20.50" " 18.5" 20.5" HA04* " " 16.00" " HA05* " " 13.50" " HA05* " " 14.50" " HA05* " " 16.00" " 20.50" " 20.5" 20.5" HA05* " " 17.50" " HA06* " " 14.50" " HA06* " " 16.00" " 20.50" " 25.5" 25.5" HA06* " " 17.50" " HA07*36 **14.25" " **14.50" " HA07*42 **15.75" " **16.00" " HA07* " " 17.50" " 20.50" " 25.5" 25.5" HA07* " " 20.50" " HA08*18 HA08* " " 13.50" " 20.50" " 12.5" 16.5" HA09*18 HA09*24 HA09* " " 13.50" " 20.50" " 16.5" 16.5" *Represents Metering Device. See Nomenclature. **If cabinet width is 17 inches or less for upflow or inches for versaflow, cabinet h i h b h d 2 i h 7

8 Cased Dimensions (Cont.) Cabinet Width in 1/4" increments Depth Height Up/Downflow Multi-position 1/2" increments Std. Multi-position HA10* " " 13.50" " HA10* " " 16.5" 16.5" HA10* " " 14.50" " HA11* " " 14.50" " HA11* " " 16.00" " 20.50" " 18.5" 20.5" HA12* " " 14.50" " HA12* " " 16.00" " 20.50" " 20.5" 20.5" HA12* " " 17.50" " HA13* " " 14.50" " HA13* " " 16.00" " 20.50" " 25.5" 25.5" HA13* " " 17.50" " HA14* " " 14.50" " HA14* " " 16.00" " HA14* " " 17.50" " 20.50" " 25.5" 25.5" HA14* " " 20.50" " HA15*36 **14.25" " **14.50" " HA15*42 **15.75" " **16.00" " HA15* " " 17.50" " 20.50" " 25.5" 25.5" HA15* " " 20.50" " HA91*42 HA91*48 HA91*60 HE20*18 HE20*24 HE21*18 HE21*24 HE21*30 HE22*24 HE22* " " 25.75" " " 25.5" 13.25" " 13.50" " 13.25" " 13.50" " 13.25" " 13.50" " HE22* " " 14.50" " HE23*24 HE23*30 HE23* " " 14.25" " 13.50" " 14.50" " HE23* " " 16.00" " HE24* " " 14.50" " HE24* " " 16.00" " HE24* " " 17.50" " HE25* " " 14.50" " HE25* " " 16.00" " HE25* " " 17.50" " HE26* " " 16.00" " HE26* " " 17.50" " HE26* " " 20.50" " *Represents Metering Device. See Nomenclature " " 12.5" 20.50" " 16.5" 20.50" " 16.5" 20.50" " 18.5" **If cabinet width is 17 inches or less for upflow or inches for multi-position, cabinet height must be changed to 27.5 inches " 16.5" 16.5" 16.5" 20.5" 20.50" " 20.5" 20.5" 20.50" " 25.5" 25.5" 20.50" " 25.5" 25.5"

9 Cased Dimensions (Cont.) Cabinet Width in 1/4" increments Depth Height Up/Downflow Multi-position 1/2" increments Std. Multi-position HE27*42 **15.75" " **16.00" " HE27* " " 17.50" " 20.50" " 25.5" 25.5" HE27* " " 20.50" " HE30*18 HE30*24 HE31*18 HE31*24 HE31*30 HE32*24 HE32*30 HE32* " " 13.25" " 13.25" " 14.25" " 13.50" " 13.50" " 13.50" " 14.50" " HE33*24 HE33*30 HE33* " " 14.25" " 14.50" " 14.50" " HE34* " " 14.50" " HE34* " " 14.50" " HE34* " " 16.00" " HE35* " " 14.50" " HE35* " " 16.00" " HE35* " " 17.50" " HE36* " " 14.50" " HE36* " " 16.00" " HE36* " " 17.50" " HE36* " " 20.50" " HE37*36 **14.25" " **14.50" " HE37*42 **15.75" " **16.00" " HE37* " " 17.50" " HE37* " " 20.50" " HE41*42 HE41*48 HE41*60 HE47*24 HE47*30 HE47*36 HE48*36 HE48*42 HE48* " " 17.25" " ***14.50" " 17.25" " 25.75" " " ***14.75" " 17.50" " HE48* " " 20.50" " HE49*42 HE49*48 HE49*60 HE50*42 HE50*48 HE50*60 HE51*42 HE51*48 HE51* " " 12.5" 16.5" 20.50" " 16.5" 16.5" 20.50" " 16.5" 16.5" 20.50" " 18.5" 20.5" 20.50" " 20.5" 20.5" 20.50" " 25.5" 25.5" 20.50" " 25.5" 25.5" 20.50" " 25.5" 25.5" " 25.5" 29.5" 20.50" " 29.5" 29.5" 20.50" " 27.5" 20.75" " 21.00" " 20.50" " 27.5" 27.5" 27.5" 20.75" " 21.00" " 20.50" " 27.5" 27.5" 20.75" " 21.00" " 20.50" " 31.5" 31.5" *Represents Metering Device. See Nomenclature. **If cabinet width is 17 inches or less for upflow or inches for versaflow, cabinet height must be changed to 27.5 inches. ***If cabinet width is 17 inches or less for upflow or inches for versaflow, cabinet height must be changed to 29.5 inches. 9

10 Airflow Data Face Wet Coil Air Pressure Drop (inches H 2 O) CFM Velocity (1) Drain Pan Width (fpm) 13" 14" 15.5" 17" 20" 20" 20.5" 25.12" HA01* HA01* HA02* HA02* HA02* HA03* HA03* HA03* HA04* HA04* '16.' HA04* HA05* HA05* HA05* HA05* HA06* HA06* HA06* HA07* HA07* HA07* HA07* HA08* HA08* HA09* HA09* HA09* HA10* HA10* HA10* HA11* HA11* *Represents Metering Device. See Nomenclature. (1) Face velocity above 350 ft/min. is not recommended for downflow or counterflow applications due to potential water blow-off. 10

11 Airflow Data (Cont.) Face CFM Velocity (1) Wet Coil Air Pressure Drop (inches H 2 O) Drain Pan Width (fpm) 13" 14" 15.5" 17" 20" 20.5" 25.12" HA12* HA12* HA12* HA13* HA13* HA13* HA14* HA14* HA14* HA14* HA15* HA15* HA15* HA15* HA91* HA91* HA91* HE20* HE20* HE21* HE21* HE21* HE22* HE22* HE22* HE23* HE23* HE23* HE23* HE24* HE24* HE24* HE25* HE25* HE25* HE26* HE26* HE26* *Represents Metering Device. See Nomenclature. (1) Face velocity above 350 ft/min. is not recommended for downflow or counterflow applications due to potential water blow-off. 11

12 Airflow Data (Cont.) Face CFM Velocity (1) Wet Coil Air Pressure Drop (inches H 2 O) Drain Pan Width (fpm) 13" 14" 15 1/2" 17" 20" 20.5" 25.12" HE27* HE27* HE27* HE30* HE30* HE31* HE31* HE31* HE32* HE32* HE32* HE33* HE33* HE33* HE34* HE34* HE34* HE35* HE35* HE35* HE36* HE36* HE36* HE36* HE37* HE37* HE37* HE37* HE41* HE41* HE41* HE47* HE47* HE47* HE48* HE48* HE48* HE48* HE49* HE49* HE49* HE50* HE50* HE50* HE51* HE51* HE51* *Represents Metering Device. See Nomenclature. (1) Face velocity above 350 ft/min. is not recommended for downflow or counterflow applications due to potential water blow-off. 12

13 "HH" Coil Dimensions "HH" Overall Plenum Model A B C D 44 23" 18 5/8" 40 & 45 27" 22 5/8" 41 & 46 31" 26 5/8" 18 3/4" 17 1/4" 42 & 47 35" 30 5/8" 43 & 48 41" 36 5/8" 49 50, 51, 56 & & 58 47" 23" 27" 42 5/8" 18 5/8" 22 5/8" 53 & 59 31" 26 5/8" 22 3/4" 21 1/4" 54 & 60 35" 30 5/8" 55 & & 66 41" 47" 36 5/8" 42 5/8" "HH" Airflow Data Wet Coil Air Pressure Drop (inches H 2 O) "HH" CFM Model , , , , , , , , , ,

14 Coil Weights "A" Coil Uncased Cased Weights (based on 21" depth) (lbs) Coil Coil Cabinet Heights Code Weight (lbs) 12.50" 16.50" 18.50" 20.50" 25.50" 27.50" 29.50" 31.50" Multi-position HA HA HA HA HA HA HA HA HA HA HA HA HA HA HA HA HE HE HE HE HE HE HE HE HE HE HE HE HE HE HE HE HE HE HE HE HE HE "HH" Coil Coil Coil Coil Code Weight (lbs) Code Weight (lbs) Code Weight (lbs) HH40 30 HH48 48 HH56 34 HH41 34 HH49 53 HH57 36 HH42 39 HH50 30 HH58 41 HH43 42 HH51 31 HH59 44 HH44 32 HH52 36 HH60 50 HH45 36 HH53 38 HH61 57 HH46 39 HH54 43 HH62 61 HH47 43 HH55 48 HH

15 Pallet Quantities Cased "A" Coil Pallet Quantities Uncased "A" Coil Pallet Quantities Cabinet Cabinet Height Drain Pan Coil Height Width 12.50" 16.50" 18.50" 20.50" 25.50" 27.50" 29.50" 31.50" Width 11" 13" 15" 17" 19" 21" 23" 25" 27" 29" 13.25" " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Horizontal Coil Pallet Quantities 19.50" Model Qty. Model Qty " HH40 8 HH " HH41 8 HH " HH42 8 HH " HH43 8 HH " HH44 8 HH " HH45 8 HH " HH46 8 HH " HH47 8 HH " HH48 8 HH " HH49 6 HH " HH50 6 HH " HH51 6 HH " " " " " " " " " " " " " " " " "

16 2175 West Park Place Boulevard Stone Mountain, GA