DAS FRAUNHOFER IKTS ALS INNOVATIVER PARTNER IM BEREICH BIO- UND MEDIZINTECHNIK
|
|
- Madeleine Chapman
- 6 years ago
- Views:
Transcription
1 DAS FRAUNHOFER IKTS ALS INNOVATIVER PARTNER IM BEREICH BIO- UND MEDIZINTECHNIK Andreas Lehmann, Dr. rer. nat. Jörg Opitz Medizintechnik in Sachsen
2 Our Business Divisions Fraunhofer IKTS in profile MATERIALS AND PROCESSES SYSTEMS EXPERTISE ENVIRONMENTAL AND PROCESS ENGINEERING MECHANICAL AND AUTOMOTIVE ENGINEERING ELECTRONICS AND MICROSYSTEMS MATERIALS DIAGNOSTICS Reliability Quality assurance BIO- AND MEDICAL TECHNOLOGY OPTICS ENERGY TECHNOLOG Y EXPERTISE WERKSTOFF- KOMPETENZ MATERIALS AND PROCESS ANALYSIS
3 Fraunhofer IKTS - BioMed Business Division Bio- and Medical Technology Competencies Development, processing and integration of biomaterials Shaping and surface technologies Microsystems technology Sensors and actuators Integration of functional mechatronic components (Bio)medical analytics and diagnostics Applications Dental technology Implants/endoprosthetics Instruments Medical components Biosensors and actuators Analytics and diagnostics
4 BioMed - competencies Competencies Biomaterials Development of customized biomaterials with defined property and structural parameters Material groups Oxide ceramics as a high purity dense or porous bioceramicsbased on Al 2 O 3 andzro 2 (ATZ, ZTA, Y-TZP, Ca 3 (PO 4 ) 2 ) andhap ceramic(lithium) Foam ceramic and metal foams Oxide and non-oxide ceramics with specific electrical, thermal and mechanical features Polymer ceramics and composites Individual material development DIN EN ISO 9001:2008 und EN ISO Scale-Up to the preindustrial scale
5 BioMed - competencies Competencies Sensor and actuator Development of functional materials, miniaturized components and systems Ceramic micro system technology(htcc, LTCC) Thick film (screen, template, pad printing) Thin film technology(cvd, PECVD, ALD) Direct writing method (aerosol, inkjet) Biocompatible assembly and packaging technology Housing und Interfaces Functional components (di-, piezo and ferroelectrics) Linking structural and functional ceramics Application centres for technology testing
6 BioMed - competencies Competencies Characterization Monitoring & testing and diagnostic methods Complex material characterization on nano, micro and macro levels (TEM, SEM, AFM, AFAM) Biophysical characterization body and surfaces Development of in vivo and in vitro analysis systems and diagnostic systems CellTissueMonitoring Investigation of stimulation and suppression processes Fluorescence-based tumor diagnosis Quality assurance of production processes (inline und post mortem) Fraunhofer IKTS branch materials diagnostics Service and method development
7 BioMed - applications Applications Implants Material development Biofunctional and biomimetic ceramics Oxid ceramicbasedon Al 2 O 3 andzro 2 High purity dense or porous Al 2 O 3 bioceramicswith sub-µm/nano-structures for shaped implants Foam ceramics and metal foams for bone replacement material Technology development Foaming-and molding technologies, slip casting, sol-gel and plasma coating, generative techniques Bioceramicsurface and shape body design Knee endoprosthesis
8 BioMed - applications Applications Dental ceramics Customer-specific material development Oxid ceramicbasedon Al 2 O 3, ZrO 2 andtheirdispersions with finely dispersed microstructure and high strength ceramicmaterialsbasedon Li 2 Si 2 O 5 Efficient process development Slip casting of ceramic components with complex geometries Closed CAD / CAM process chain certified EN ISO 13485: AC:2009 3D digitizer Dental ceramics under UV illumination SEM image Y-TZP
9 BioMed - applications Applications Biosensors and -actors Sensors for diagnostics Multisensor-Arrays CellTissueMonitoring Development of nanoparticles for diagnostics Bioactors Functional stimulation module (electric / acoustic / mechano-stimulation in vitro and in vivo) Ultrasonic transducer arrays for particle manipulation Ultrasonic transducer arrays for particle manipulation Energy systems Scalable power transmission systems ex-vivo to in vivo (eg. for theranostical hip implants) Mobile power transmission system
10 BioMed - applications Applications Monitoring systems / testing and diagnostic systems Process development Qualification optical diagnostics for medical and life sciences (OCT, Nanoraman) Monitoring of cell and bacterial growth processes Sensors for the detection of biogenic and biosynthetic polymers Intraocular pressure measurement using air-ultrasound Sterility detection by nanoparticles(sterihealth ) Device development Fluorescence-basedcancerdiagnostic(OCD) 3D visualization of a tooth using optical coherence tomography
11 BioMed - applications Applications Surgical instruments and components Materials, technology and component developments (Micro) Surgical instruments and cutting materials Ceramic tips for minimally invasive surgery Functional (conductive, bioactive, biosuppressive) layers Functional films Ceramic springs Components for X-ray equipment Plasma gel-coated surgical instrument
12 THANK YOU FOR YOUR ATTENTION! Contact: Andreas Lehmann Fraunhofer IKTS Maria-Reiche-Str Dresden andreas.lehmann@ikts.fraunhofer.de
Ceramic materials with submicron structure based on nanopowders
Ceramic materials with submicron structure based on nanopowders Uwe Reichel, Fraunhofer Institute for Ceramic Technologies and Systems IKTS Institutsteil Hermsdorf, D-07629 Hermsdorf, Germany Nanophotonics
More informationFRAUNHOFER INSTITUTE FOR CERAMIC TECHNOLOGIES AND SYSTEMS IKTS BUSINESS DIVISION MATERIALS AND PROCESSES
FRAUNHOFER INSTITUTE FOR CERAMIC TECHNOLOGIES AND SYSTEMS IKTS BUSINESS DIVISION MATERIALS AND PROCESSES 1 MATERIALS AND PROCESSES Fraunhofer IKTS s Materials and Processes business division offers oxide,
More informationFRAUNHOFER INSTITUTE FOR CERAMIC TECHNOLOGIES AND SYSTEMS IKTS BUSINESS DIVISION MECHANICAL AND AUTOMOTIVE ENGINEERING
FRAUNHOFER INSTITUTE FOR CERAMIC TECHNOLOGIES AND SYSTEMS IKTS BUSINESS DIVISION MECHANICAL AND AUTOMOTIVE ENGINEERING 1 MECHANICAL AND AUTOMOTIVE ENGINEERING The Mechanical and Automotive Engineering
More informationBuilding the Europe of Knowledge
Building the Europe of Knowledge 7 th Framework Programme 2007-2013 Nanotechnology! All information preliminary! FP7 1. Capacities: Infrastructures 2. People: Erasmus, Marie-Curie 3. Ideas: ERC 4. Cooperation:
More informationJSI Jozef Stefan Institute
Complete denomination: Jožef Stefan Institute, Engineering Ceramics Dept. Location (city, country): Ljubljana Slovenia Director: prof. dr. Jadran Lenarčič Contact person in NEWGEN: prof. dr. Tomaž Kosmač;
More informationCeramic materials based on nanopowders
Ceramic materials based on nanopowders Uwe Reichel, Fraunhofer Institute for Ceramic Technologies and Systems IKTS Hermsdorf branch of the institut, D-07629 Hermsdorf, Germany Ceramic materials based on
More informationCourse Code: BMEG5100 Course Title: Advanced Medical Robotics Course Code: BMEG5110 Course Title: Advanced Medical Devices and Sensor Networks
Course Code: BMEG5100 Course Title: Advanced Medical Robotics Review of medical robotics fundamentals; introduction to robotics enabled endoscopic and laparoscopic surgeries; concepts of robotics based
More informationGeneral Introduction to Microstructure Technology p. 1 What is Microstructure Technology? p. 1 From Microstructure Technology to Microsystems
General Introduction to Microstructure Technology p. 1 What is Microstructure Technology? p. 1 From Microstructure Technology to Microsystems Technology p. 9 The Parallels to Microelectronics p. 15 The
More informationProviding Technical Solutions for Biological Processes and Medical Devices
Cooperations, clients and partners Our R&D services range from strategic background research and bilateral industrial projects to the coordination of industrial project consortia in, for instance, joint
More informationCoatingImplants. ResearchEngineer OrchidOrthopedicSolutions
2014 CoatingImplants ParimalBapat,Ph.D. ResearchEngineer OrchidOrthopedicSolutions OMTEC 2014 Technical Session: Coating Implants June 11 th 2014 1:30 PM 2:30 PM Presenter: Dr. Parimal V. Bapat Research
More informationBiomaterials in Medical device design
Biomaterials in Medical device design 1 Dr Joseph Buhagiar B. E n g ( H o n s. ) P h D ( B h a m ) D e p a r t m e n t o f M e t a l l u r g y a n d M a t e r i a l s E n g i n e e r i n g U n i v e r
More informationAdvanced solutions for the Healthcare sector
TECHNICAL CERAMICS Morgan Advanced Materials For all inquiries, please contact our specialist sales and marketing offices: Morgan Advanced Materials is a global engineering company offering world-leading
More informationPrecision etching of micro components
Precision etching of micro components A High-Tech Profile Micrometal manufactures customized, highly accurate etched components. We photochemically etch these parts from thin materials (starting at 0.025
More informationFRAUNHOFER INSTITUTE FOR SURFACE ENGINEERING AND THIN FILMS IST OPTICAL COATINGS
FRAUNHOFER INSTITUTE FOR SURFACE ENGINEERING AND THIN FILMS IST OPTICAL COATINGS OPTICAL FUNCTIONAL COATINGS AT THE FRAUNHOFER IST The development of optical functional films and the related coating processes
More informationThe advantages and use of ceramics in medicine
The advantages and use of ceramics in medicine G. Carl Friedrich-Schiller-Universität Jena Otto-Schott-Institut (now with JSJ Jodeit GmbH Jena) ORTHOSONIC CERAMIC CONFERENCE Saturday 6 th July 2002 bioceramics
More informationMICROSTRUCTURE-BASED ANALYTICS AND SENSOR TECHNOLOGY
MICROSTRUCTURE-BASED ANALYTICS AND SENSOR TECHNOLOGY 1 CTCelect: Isolation of single CTCs 2 Diagnostic fluidic chip 3 Fluidic chip for cell isolation 4 Helium detector 5 MEMS micro densitometer 1 APPLICATION
More informationContents Preface xiii Introduction Fabrication and manufacturing technology for optical MEMS
Contents Preface xiii 1 Introduction 1 1.1 Optical MEMS and optofluidics 1 1.2 History 1 1.2.1 Processes and materials 1 1.2.2 Early devices and systems 2 1.3 Progress in optical MEMS and optofluidics
More informationCeramics, Glasses, and Glass-Ceramics
Ceramics, Glasses, and Glass-Ceramics Ceramics, Glasses, and Glass-Ceramics include a broad range of inorganic/nonmetallic compositions. Eyeglasses Diagnostic instruments Thermometers Tissue culture flasks
More informationFUNCTIONAL STRUCTURES STRUCTURING ADVANTAGES INTEGRATING FUNCTIONS
F R A U N H O F E R I N S T I T U T e F O R M A N U FA C T U R I N G A N D A D VA N C E D M AT E R I A L S I FA M FUNCTIONAL STRUCTURES STRUCTURING ADVANTAGES INTEGRATING FUNCTIONS C O N T E N T F U N
More informationScratch Testers. Coating Adhesion, Scratch and Mar Resistance. ::: World Leader in Scratch Testing
Scratch Testers Coating Adhesion, Scratch and Mar Resistance ::: World Leader in Scratch Testing Anton Paar Scratch Testers Anton Paar is the world leader in the field of material characterization of surfaces,
More informationEnhanced Response from Engineered Nano Treated Peizofilm
Enhanced Response from Engineered Nano Treated Peizofilm By Sai Narayan Sundar Advisor Dr J.P Sharma Dept. of Mechanical Engineering University of Mississippi i: flow of current due to piezo deformation
More informationNanodiamond-Based Therapeutic Delivery Films For the Treatment of Cancer and Inflammation
Nanodiamond-Based Therapeutic Delivery Films For the Treatment of Cancer and Inflammation Dean Ho, Ph.D. Assistant Professor Departments of Biomedical and Mechanical Engineering Lurie Comprehensive Cancer
More informationA novel pick-and-place process for ultra-thin chips on flexible smart systems Thomas Meissner (Hahn-Schickard)
A novel pick-and-place process for ultra-thin chips on flexible smart systems Thomas Meissner (Hahn-Schickard) Dr. rer. nat. Outline 1. Introduction to Hahn-Schickard 2. Motivation 3. Pick process 4. Application
More informationMultiphoton lithography based 3D micro/nano printing Dr Qin Hu
Multiphoton lithography based 3D micro/nano printing Dr Qin Hu EPSRC Centre for Innovative Manufacturing in Additive Manufacturing University of Nottingham Multiphoton lithography Also known as direct
More informationTHE NEW PARADIGM OF QUALITY CONTROL IN THE INDUSTRY 4.0 ERA
THE NEW PARADIGM OF QUALITY CONTROL IN THE INDUSTRY 4.0 ERA www.ikts.fraunhofer.de Ceramics Osaka Industrie 4.0 Internet of Things Motivation: Individualised Production Individualised Production based
More informationCeramics in Precision HIGH PERFORMANCE CERAMICS
HIGH PERFORMANCE CERAMICS Ceramics in Precision MATERIAL DEVELOPMENT HIGH PRESSURE INJECTION MOLDING CNC MACHINING IN THE GREEN STATE 3D CAD / CAM 3D CERAMIC PRINTING PROTOTYPING HARD CNC MACHINING QUALITY
More informationFRAUNHOFER INSTITUTE FOR PHOTONIC MICROSYSTEMS IPMS SMART MATERIALS
FRAUNHOFER INSTITUTE FOR PHOTONIC MICROSYSTEMS IPMS SMART MATERIALS 1 ELECTRO-ACTIVE ORGANIC MATERIALS At Fraunhofer IPMS electro-active organic materials are implemented in the design of new and smarter
More informationSoft Fabrication and Polymers
Introduction to BioMEMS & Medical Microdevices Soft Fabrication and Polymers Companion lecture to the textbook: Fundamentals of BioMEMS and Medical Microdevices, by Prof., http://saliterman.umn.edu/ R012408
More informationFraunhofer ENAS Current results and future approaches in Wafer-level-packaging FRANK ROSCHER
Fraunhofer ENAS - Current results and future approaches in Wafer-level-packaging FRANK ROSCHER Fraunhofer ENAS Chemnitz System Packaging Page 1 System Packaging Outline: Wafer level packaging for MEMS
More informationPrecision etching of micro components
Precision etching of micro components A High-Tech Profile Micrometal manufactures customized, highly accurate etched components. We photochemically etch these parts from thin materials (starting at 0.025
More informationSurface engineering for new industrial applications - bio application
Surface engineering for new industrial applications - bio application Dr. Yangchun Dong Bsc. Msc. PhD Tel.: +420541143323 Mobile: +420776395588 30/10/2013, Brno Introduction 1. A few questions to answer:
More informationSelection criteria for Biomaterials
Selection criteria for Biomaterials Biomaterials and biomedical devices are used throughout the human body. 2 important aspects: Functional performance Biocompatibility Hip joint prosthesis 1 Functional
More informationNanyang Technological University School of Materials Science & Engineering
Final Year Project Proposal 1 3D Assembly of Nano/Micro Zirconia Particles for Enhanced Energy Damping Capacity Dr Du Zehui (duzehui@ntu.edu.sg) To develop the best possible method to assemble micro/nano-scale
More informationWe get small. Micron-scale Circuits and Structures from Prototype through Production
We get small. Micron-scale Circuits and Structures from Prototype through Production Smaller, tighter, better. When you need to produce ultra-small electrical, mechanical and optical components to extreme
More informationM. Ikhlasul Amal 1) Research Center for Metallurgy and Material Indonesian Institute of Sciences 2) Indonesian Society for Nano
National policy, regulatory and institutional support mechanism/framework and critical gaps in testing standardization and certification of nanomaterials and nanoproducts: INDONESIA chapter M. Ikhlasul
More informationMaterials Characterization for Stress Management
Materials Characterization for Stress Management Ehrenfried Zschech, Fraunhofer IZFP Dresden, Germany Workshop on Stress Management for 3D ICs using TSVs San Francisco/CA, July 13, 2010 Outline Stress
More informationAtmospheric plasma technology for surface modification of nanoparticles
9/16/2011 Atmospheric plasma technology for surface modification of nanoparticles Dirk Vangeneugden - COST Meeting, Espoo, Finland, 15-16/09/2011 Contents Introduction to VITO Developed atmospheric plasma
More informationPreface Preface to First Edition
Contents Foreword Preface Preface to First Edition xiii xv xix CHAPTER 1 MEMS: A Technology from Lilliput 1 The Promise of Technology 1 What Are MEMS or MST? 2 What Is Micromachining? 3 Applications and
More informationACTIVATION AND FUNCTIONALIZATION OF POLYMERS BASED ON GEOMETRY- INDEPENDENT PLASMA SOURCE CONCEPTS
ACTIVATION AND FUNCTIONALIZATION OF POLYMERS BASED ON GEOMETRY- INDEPENDENT PLASMA SOURCE CONCEPTS October 25, 2017 - Parts2Clean Fachforum und Innovationsforum AGENDA Fraunhofer IST Basics about plasma
More informationAdvanced Materials & Structures (AMS)
Competences Advanced Materials & Structures (AMS) Main axes of research Material design: Innovative materials Custom made materials (surface or bulk treatment) Improvement of material performance via bulk
More informationThe role of thermal spray in medical applications
The role of thermal spray in medical applications Rajan Bamola Traditionally, thermal spray in the medical industry has been linked to the spraying of either titanium or hydroxyapatite on dental, spinal
More informationPrecision etching of micro components
Precision etching of micro components A High-Tech Profile Micrometal manufactures customized, highly accurate etched components. We photochemically etch these parts from thin materials (starting at 0.025
More informationGE Sensing & Inspection Technologies MEMS. Global Solutions for Microsystems
GE Sensing & Inspection Technologies MEMS Global Solutions for Microsystems g Global research, development and manufacturing excellence Groby, United Kingdom MEMS Design and Manufacturing Center Advanced
More informationFabrication and characterization of HAp /Al 2 O 3 composite cating on titanium substrate
J. Biomedical Science and Engineering, 2008, 1, 190-194 Fabrication and characterization of HAp /Al 2 O 3 composite cating on titanium substrate Zhou-Cheng Wang, Yong-Jin Ni, Jin-Cong Huang Department
More informationAdvances in Intense Pulsed Light Solutions For Display Manufacturing. XENON Corporation Dr. Saad Ahmed Japan IDW 2016
Advances in Intense Pulsed Light Solutions For Display Manufacturing XENON Corporation Dr. Saad Ahmed Japan IDW 2016 Talk Outline Introduction to Pulsed Light Applications in Display UV Curing Applications
More informationContents. Preface... V
Preface... V 1 MID Technology and Mechatronic Integration Potential... 1 1.1 Technological Basics... 1 1.1.1 Definition and Root Principle... 1 1.1.2 Geometric Classification... 2 1.1.3 Potential of 3D-MID
More informationLodz University of Technology POLAND
Synthesis, modification and sterilization of polymeric biomaterials expertise Radoslaw Wach BIOMATERIALS group Division of Applied Radiation Chemistry Main directions of investigations 1. radiation chemistry
More informationDr. Arun Singh. Sponsored by DST. Year of start. Held. Principal Investigator. Principal Investigator BOYSCAST FELLOW
Dr. Arun Singh Advanced Electronic and Nano-Materials Laboratory R.N.- 304 III Floor, Department of Physics Faculty of Natural Sciences Jamia Millia Islamia, Central University, New Delhi-110025 (INDIA).
More informationPHS6317 NANO-ENGINEERING OF THIN FILMS
PHS6317 NANO-ENGINEERING OF THIN FILMS Ludvik Martinu, ing., PhD Professor Chairholder: NSERC Multisectorial Industrial Research Chair in Coatings and Surface Engineering ludvik.martinu@polymtl.ca www.polymtl.ca/larfis
More informationAdvanced Materials Technology Key Expertise Theme. astutewales.com
Advanced Materials Technology Key Expertise Theme astutewales.com Understanding the Behaviour of Materials. Materials used to manufacture components is a key area for ensuring efficient production and
More informationThe University of North Texas Department of Materials Science & Engineering
The University of North Texas Department of Materials Science & Engineering 2017 Spring Semester Course Title: MTSE 4020, Materials in Medicine Instructor: Narendra B. Dahotre, Office DP C136E, Phone:
More informationAerosol Jet International User Group Meeting. Metallization and Functional Structures by Aerosol Jet deposition
17.10.2012 1 2012 Aerosol Jet International User Group Meeting Metallization and Functional Structures by Aerosol Jet deposition Andreas Brose Institut für Mikro- und Sensorsysteme Lehrstuhl Mikrosystemtechnik
More informationNMS Programme Formulation and Roadmaps
NMS Programme Formulation and Roadmaps Polymeric Materials IAG Wednesday 12 March 2008 Roadmaps: Why we need them, what they will be used for and how we move forward Martin Rides, Bill Nimmo Rolling formulation
More informationcubic zirconia system
The (R)evolution cubic zirconia system Bending strength according to ISO 6872 > 720 MPa Fracture toughness according to ISO 6872 > 4,5 MPa m Translucency at a thickness of 0,6 mm 49 % 3420 Pharmacy Ave.
More informationQuality Blanks direct from the Manufacturer
Mechanical Applications Division Quality Blanks direct from the Manufacturer Expanded range of colors for translucent zirconium oxide On a long term basis, high quality is the basic requirement to become
More informationPRODUCTION I FUNCTIONALIZATION I QUALITY ASSURANCE
FRAUNHOFER INSTITUTE FOR CERAMIC TECHNOLOGIES AND SYSTEMS IKTS INDUSTRIAL SOLUTIONS ADDITIVE MANUFACTURING PRODUCTION I FUNCTIONALIZATION I QUALITY ASSURANCE A INHALT 1 Overview 2 Production 6 Functionalization
More informationOrganic Thin Films Laboratory (OTFL), Hanyang University
Organic Thin Films Laboratory (OTFL), Hanyang University Prof. Haiwon Lee (haiwon@hanyang.ac.kr) Department of Chemistry Hanyang University Distinguished Professor Director of Asian Research Network Program
More informationPast, Present and Future of the Republic Center for Structure Researches of Georgian Technical University
Head of the Center Professor Elguja Kutelia Past, Present and Future of the Republic Center for Structure Researches of Georgian Technical University Outlook New generation nano-porous brake pads New ADI
More informationKick-off meeting. Introducing: INNOVENT e. V. Barcelona, 3-5 March 2014
DEVELOPMENT OF SUSTAINABLE INTERRELATIONS BET- WEEN EDUCATION, RESEARCH AND INNOVATION AT WBC UNIVERSITIES IN NANOTECHNOLOGIES AND ADVANCED MATERIALS WHERE INNOVATION MEANS BUSINESS Introducing: INNOVENT
More informationFraunhofer - Institut für Fertigungstechnik und Angewandte Materialforschung IFAM Formgebung und Funktionswerkstoffe
F R A U N H O F E R I N S T I T U T e F O R M A N U FA C T U R I N G A N D A D VA N C E D M AT E R I A L S I FA M CASTING technology Innovative SOLUTIONS FOR INTELLIGENT CASTINGS C O N T E N T C a s t
More informationWHITE BIOTECHNOLOGY CELLS FOR MATERIALS AND MATERIALS FOR CELLS
WHITE BIOTECHNOLOGY CELLS FOR MATERIALS AND MATERIALS FOR CELLS WHITE BIOTECHNOLOGY CELLS FOR MATERIALS AND MATERIALS FOR CELLS Design by ex nihilo APPLICATIONS Durable and profitable products and processes
More informationNanotechnologies: 3-D Tomography in a Transmission Electron Microscope (TEM) PROPOSAL
Nanotechnologies: 3-D Tomography in a Transmission Electron Microscope (TEM) PROPOSAL 3-D Tomography in a Transmission Electron Microscope What is it? The transmission electron microscope (TEM) operates
More informationIntroduction [1] Introduction to the course; CEO and CLO
MME 297: Lecture 01 Introduction [1] Introduction to the course; CEO and CLO Dr. A. K. M. Bazlur Rashid Professor, Department of MME BUET, Dhaka Topics to discuss today. What are Biomaterials? Classes
More informationBiomedical sensor technology: state - of the art and future roadmap
Biomedical sensor technology: state - of the art and future roadmap Ralph W. Bernstein SINTEF Microsystems and nanotechnology 1 MiNaLab Clean room area: SINTEF: 800 m 2 University of Oslo: 600 m 2 Micro
More informationMedical Devices: Engineering s Contributions to the Quality of Life
Medical Devices: Engineering s Contributions to the Quality of Life Guna Selvaduray San Jose State University inemi Medical Electronics Workshop Santa Clara, California May 4 5, 2011 Presentation Outline
More informationNanodiamond-Polymer Composite Fibers and Coatings
Nanodiamond-Polymer Composite Fibers and Coatings Yury Gogotsi et al. A.J. Drexel Nanotechnology Institute and Department of Materials Science and Engineering Drexel University, Philadelphia, Pennsylvania
More informationAn Overview of Silicon Nitride as a Novel Biomaterial
An Overview of Silicon Nitride as a Novel Biomaterial Bryan J. McEntire, MBA, Alan Lakshminarayanan, Ph.D., B. Sonny Bal, MD, MBA, JD, and Thomas J. Webster, Ph.D. Si 3 N 4 has many industrial uses Bearings
More informationProduction and commercialisation of vascularized and customized bone Clinical trials, market authorisation Pre-clinical trials
Production and commercialisation of vascularized and customized bone Clinical trials, market authorisation Pre-clinical trials Basic Research: scaffolds, cells/ media, in vivo imaging, modelling www.vascubone.eu
More informationFunctionally stratified design and manufacture of hip and knee joints
Functionally stratified design and manufacture of hip and knee joints is to develop and deliver new simulation methods for the design and manufacture of hip and knee prostheses, to be evaluated through
More informationTechnical University of Cluj-Napoca, Muncii Ave., Cluj-Napoca, Romania
Materials Science Forum Online: 2011-01-20 ISSN: 1662-9752, Vol. 672, pp 121-124 doi:10.4028/www.scientific.net/msf.672.121 2011 Trans Tech Publications, Switzerland Elaboration of Titanium-Nickel Alloy
More informationSurface Construction Of Zn Doped Hydroxyapatite/mgf2 Multilayer Coatings For The Biomedical Mg Materials By A Novel Conversion/sol-gel Method
Surface Construction Of Zn Doped Hydroxyapatite/mgf2 Multilayer Coatings For The Biomedical Mg Materials By A Novel Conversion/sol-gel Method Heng Jui Liu 1, Da Jun Lin 1, Subhaini jakfar 2, Fei Yi Hung
More informationLDP-UPM / Product Development Lab, Universidad Politécnica de Madrid GENERAL PRESENTATION
GENERAL PRESENTATION Complete denomination: Product Development Lab, Mechanical Engineering Department, Location (city, country): Madrid, Spain Director: Prof. Pilar Lafont Morgado Contact person in NEWGEN:
More informationBlue Marble University. Fast Track Combination Bachelor of Science (B.S.) and Doctor of Science (D.Sc.) in Biomedical engineering
Blue Marble University Fast Track Combination Bachelor of Science (B.S.) and Doctor of Science (D.Sc.) in Biomedical engineering 5 Year program which you can enter right after High School And Complete
More informationAtomic Layer Deposition (ALD)
Atomic Layer Deposition (ALD) ALD provides Uniform, controlled, conformal deposition of oxide, nitride, and metal thin films on a nanometer scale. ALD is a self limiting thin film deposition technique
More informationFRAUNHOFER INSTITUTE FOR CERAMIC TECHNOLOGIES AND SYSTEMS IKTS CENTER OF COMPETENCE POWDER TECHNOLOGY
FRAUNHOFER INSTITUTE FOR CERAMIC TECHNOLOGIES AND SYSTEMS IKTS CENTER OF COMPETENCE POWDER TECHNOLOGY PRODUCT DESIGN READY-TO-PRESS-POWDER (PREMIX) POWDER FOR THERMAL CLADDING AND SPRAYING FUNCTIONAL POWDERS
More informationapplications J.C. Huang 1, J.S.C. Jang 2, C.H. Lin 1, C.H. Chen 3, C.H. Huang 1, R.F. Chuang 1 National Sun Yat-Sen University
Ti and Ta based metallic glasses for biomedical applications J.C. Huang 1, J.S.C. Jang 2, C.H. Lin 1, C.H. Chen 3, C.H. Huang 1, R.F. Chuang 1 1 National Sun Yat-Sen University 2 National Central University
More informationa solution for reducing the
Outsourcing the precision cleaning, a solution for reducing the environmental impact Trade fair Hanover 2015 Heiko ZSCHIEDRICH Hanover April 15, 2015 Summary 1. Introduction and presentation of ECP 2.
More informationHigh Barrier Multi-Layer Parylene Coating
High Barrier Multi-Layer Parylene Coating Technology overview Surface Technolgy 2018 Company Profile Swiss company founded in 1979 Experts in Parylene coating technology Parylene Equipment Export rate
More informationHolographix LLC Overview. High quality custom replicated optics and surface relief patterns in production volumes
Holographix LLC Overview 2018 High quality custom replicated optics and surface relief patterns in production volumes One location in Marlborough, MA. 15,000 sq. ft. facility with additional space available
More informationFACULTY OF ENGINEERING
FACULTY OF ENGINEERING List of for University of Malaya Student Exchange (UMSEP) for the 2015/2016 Academic Session BACHELOR OF BIOMEDICAL & PROSTETIK ORTOTIK No 1 KUEP1131 STATICS 2 / 2 KUEP1171 PRACTICAL
More informationcubic zirconia system
e ia Th on tion rc lu Zi vo )e (R cubic zirconia system Bending strength according to ISO 6872 Fracture toughness according to ISO 6872 Translucency at a thickness of 0,6 mm > 720 MPa > 4,5 MPa m 49 %
More informationPiezoelectric Polycrystalline (PZT) Components and Wafers
Piezoelectric Polycrystalline (PZT) Components and Wafers Industry Leading Piezoelectric Polycrystalline (PZT) Component Manufacturing and Engineering CTS offers high-performance piezoelectric materials
More informationDirected Assembly of Nanoparticles for Biosensing Applications
NSF Nanoscale Science and Engineering Center for High-rate Nanomanufacturing (CHN) www.nano.neu.edu Directed Assembly of Nanoparticles for Biosensing Applications Ahmed Busnaina, Director, NSF Nanoscale
More informationNanostructured Plasmonic Interferometers for Ultrasensitive Label-Free Biosensing. Fil Bartoli Lehigh University 4/9/2014
Nanostructured Plasmonic Interferometers for Ultrasensitive Label-Free Biosensing Fil Bartoli Lehigh University 4/9/2014 P.C. Rossin College of Engineering and Applied Science Department of Electrical
More informationZnO-based Transparent Conductive Oxide Thin Films
IEEE EDS Mini-colloquium WIMNACT 32 ZnO-based Transparent Conductive Oxide Thin Films Weijie SONG Ningbo Institute of Material Technology and Engineering, Chinese Academy of Sciences, Ningbo, P. R. China
More informationNANOSTRUCTURED TiN THIN FILMS SUITABLE FOR MEDICAL APPLICATIONS
MATERIALS FORUM VOLUME 32-28 Edited by J.M. Cairney, S.P. Ringer and R. Wuhrer! Institute of Materials Engineering Australasia Ltd NANOSTRUCTURED TiN THIN FILMS SUITABLE FOR MEDICAL APPLICATIONS M. H.
More informationTED PELLA, INC. Microscopy Products for Science and Industry
PELCO SILICON NITRIDE, SILICON DIOXIDE, BLANK SILICON SUBSTRATES & APERTURES FOR TEM Clean, Debris-free with Exact 3mm TEM Frame and EasyGrip Edges PELCO Silicon Nitride Support Films for TEM Hydrophilic
More informationJānis Grabis. Plasma chemical synthesis of multicomponent nanopowders, their characteristics, and processing
Jānis Grabis Plasma chemical synthesis of multicomponent nanopowders, their characteristics, and processing Outline Introduction nanoparticles, their preparation methods Experimental synthesis of multicomponent
More informationEuropean Technology Platform for Nanomedicine. Inês Mendes Pinto, PharmD, PhD Portugal
European Technology Platform for Nanomedicine Inês Mendes Pinto, PharmD, PhD Portugal INL International Iberian Nanotechnology Laboratory General presentation of the Institute 1) Location: Braga- Portugal
More informationManipulation and control of spatial ALD layers for flexible devices. Aimcal Memphis 2016; Edward Clerkx
Manipulation and control of spatial ALD layers for flexible devices Meyer Burger Netherlands Equipment manufacturer Functional inkjet printing Based in Eindhoven, the Netherlands Part of world-wide Meyer
More informationPEEK Biomaterials Handbook, Steven M. Kurtz
PEEK Biomaterials Handbook, Steven M. Kurtz PEEK Biomaterials Handbook, 1437744648, 9781437744644, 306 pages, 2011, William Andrew, 2011, Steven M. Kurtz, PEEK biomaterials are currently used in thousands
More informationBio-Inspired Structures Spring 2009
MIT OpenCourseWare http://ocw.mit.edu 16.982 Bio-Inspired Structures Spring 2009 For information about citing these or our Terms of Use, visit: http://ocw.mit.edu/terms. . Theory.. Smart Materials. Theory..
More informationThe Italian National Research Council (CNR)
The Italian National Research Council (CNR) The National Research Council (CNR) is the largest public research institution depending directly from the Ministry of Education, University and Research (MIUR)
More informationNATIONAL RESEARCH PROGRAMMES FOR HIGH TECH CERAMICS IN THE NETHERLANDS
Printed High Tech Ceramics, edited by P. Vincenzini 3063 Elsevier Science Publishers By., Amsterdam, 1987 in The Netherlands NATIONAL RESEARCH PROGRAMMES FOR HIGH TECH CERAMICS IN THE NETHERLANDS R. METSELAAR
More informationEmbedded Passives..con0nued
Embedded Passives..con0nued Why Embedded Passives? Improves the packaging efficiency System-on-Package (SOP); SLIM integration Reducing size Eliminating substrate assembly Minimizing solder joint failure
More informationPassive components : 5 years failure analysis feedback From all markets
2 nd SPCD 12-14 October 2016 Passive components : 5 years failure analysis feedback From all markets Eric ZAIA (Material Engineer) Béatrice MOREAU (Passive components & PCB dpt. Manager) SUMMARY 1 Introduction
More informationCeramic Processing Research
Journal of Ceramic Processing Research. Vol. 11, No. 1, pp. 100~106 (2010) J O U R N A L O F Ceramic Processing Research Factors affecting surface roughness of Al 2 O 3 films deposited on Cu substrates
More informationInfluence of Underlayer on Crystallography and Roughness of Aluminum Nitride Thin Film Reactively Sputtered by Ion-Beam Kaufman Source
Influence of Underlayer on Crystallography and Roughness of Aluminum Nitride Thin Film Reactively Sputtered by Ion-Beam Kaufman Source GABLECH Imrich 1,*, SVATOŠ Vojtěch 1,, PRÁŠEK Jan 1,, HUBÁLEK Jaromír
More informationSurface Bioactivity of Sol Gel Derived 3Y-TZP Bioinert Ceramic through Hydroxylation Technique Using 5M H 3 PO 4
American Journal of Applied Sciences 7 (3): 381-385, 2010 ISSN 1546-9239 2010Science Publications Surface Bioactivity of Sol Gel Derived 3Y-TZP Bioinert Ceramic through Hydroxylation Technique Using 5M
More informationSILICA AND TITANIUM OXIDE THIN FILMS FOR MEDICAL IMPLANTS
SILICA AND TITANIUM OXIDE THIN FILMS FOR MEDICAL IMPLANTS DONESZ-SIKORSKA A. 1 KRZAK-ROŚ J. 1 GRYGIER D. 1 KALETA J. 1 Abstract:. Metals and their alloys are the basic materials using for bone implants.
More information