special male. Bronze 3-Piece Full Port Ball Valve With Male Brazed Extensions

Transcription

1 special male Bronze 3-Piece Full Port Ball Valve With Male Brazed Extensions Solder end, 600 CWP (psig), Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Designed for soft solder or brazed installation without disassembly. MSS SP-110 compliant. FEATURES Full port configuration Reinforced seats and seals In-line repairable Blow-out-proof stem design Adjustable packing gland Latch lock handle optional STANDARD MATERIAL LIST Part material 1 Lever and grip Steel, zinc plated w/vinyl 2 Stem packing MPTFE 3 Stem bearing RPTFE 4 Ball B16, chrome plated 5 Seat (2) RPTFE 6 End cap (2) B584-C Gland B16 8 Stem B16 9 Lever nut Steel, zinc plated 10 Body bolt Steel, zinc plated 11 Hex nut Steel, zinc plated 12 Body B584-C Extension Type K copper tubing 14 Brazing alloy Sil-Fos 5 15 Cap plugs (not shown) product NUMBER standard model NUMBER W/ 316 ss Ball & Stem product NUMBER oxygen cleaned model NUMBER W/ 316 ss Ball & Stem SIZE A B C D E F G Wt B A K K1 1/ / A B K K1 3/ / B B K K / B B K K / B B K K / B B K K / For Pressure/Temperature Ratings,Refer to Page m-10, Graph No. 4 Copyright 2013 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA REV H-21

2 special female Bronze 3-Piece Full Port Ball Valve With 6 Female Brazed Extensions Solder End, 600 CWP (psig), Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Designed for soft solder or brazed installation without disassembly. MSS SP-110 compliant. FEATURES Full port configuration Reinforced seats & seals In-line repairable Blow-out-proof stem design Adjustable packing gland Latch lock handle optional STANDARD MATERIAL LIST Part material 1 Lever and grip Steel, zinc plated w/vinyl 2 Stem packing MPTFE 3 Stem bearing RPTFE 4 Ball B16, chrome plated 5 Seat (2) RPTFE 6 End cap (2) B584-C Gland B16 8 Stem B16 9 Lever nut Steel, zinc plated 10 Body bolt Steel, zinc plated 11 Hex nut Steel, zinc plated 12 Body B584-C Extension Type K copper tubing 14 Brazing alloy Sil-Fos 5 15 Cap plugs (not shown) Standard product No. oxygen cleaned product NO. Trim: Plated Trim: Plated Trim: stainless SIZE A B C D E F G* H Wt. Non-locking handle Non-locking handle Non-locking handle C K K2 1/ / C K K2 3/ / C K K / C K K / B K K / C K K / *NOMINAL TUBING O.D. For Pressure/Temperature Ratings,Refer to Page m-10, Graph No. 4 H-22 REV

3 flow data For Apollo Ball Valves The listed Cv factors are derived from actual flow testing, in the Apollo Ball Valve Division, Conbraco Industries, Inc., Pageland, South Carolina. These tests were completed using standard off the shelf valves with no special preparation and utilizing standard schedule 40 pipe. It should be understood that these factors are for the valve only and also include the connection configuration. The flow testing is done utilizing water as a fluid media and is a direct statement of the gallons of water flowed per minute with a 1 psig pressure differential across the valve/ connection unit. Line pressure is not a factor. Because the Cv is a factor, the formula can be used to estimate flow of most media for valve sizing. flow of liquid P Q = C V SpGr or P = (Q) 2 (SpGr) (Cv) 2 flow of gas ( P) (P2) Q = 1360 C V (SpGr) (T) or P = 5.4 x 10-7 (SpGr) (T) (Q) 2 (Cv) 2 (P2) Where: Q = ΔP = SpGr = Cv = flow in US gpm pressure drop (psig) specific gravity at flowing temperature valve constant Where: Q = flow in SCFH ΔP = pressure drop (psig) SpGr = specific gravity (based on air = 1.0) P 2 = outlet pressure psia (psig ) T = (temp. F + 460) Cv = valve constant Cv FACTORS FOR APOLLO VALVES size (in.) 1/4 3/8 1/2 3/ Valve /200 Series /200 Series W Series B-140 Series /200 Series /400 Series Series Series AR Series /200 Series /900 Series A-100 Series /400 Series Series Series AR Series F-100 Series Series /400 Series Series K-100 Series AR Series C-100/200 Series D-140 Series D-640 Series G-UL Series W Series X Series /200 Series Series continued on next page Copyright 2013 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA M-3

4 flow data For Apollo Ball Valves Cv FACTORS FOR APOLLO VALVES (continued from page M-3) size (in.) 1/4 3/8 1/2 3/ Valve 80/81 Series /200 Series A/83B Series R-100/200 Series A/86B Series R-100/200 Series A-100 Series A-200 Series A-700 Series A-900 Series B-100 Series A-100 Series A-200 Series A-700 Series A-900 Series B-100 Series Series A-100 Series Series Series Series A-100/200 Series /200 Series A-300/400 Series Series Series Series M-4

5 pressure temperature ratings 400# Bronze (GRAPH 3) 600# Bronze (GRAPH 4) M-10