ISRAEL AEROSPACE INDUSTRIES WHEN RESULTS MATTER
|
|
- Norah Randall
- 6 years ago
- Views:
Transcription
1 ISRAEL AEROSPACE INDUSTRIES WHEN RESULTS MATTER This document contains proprietary information of Israel Aerospace Industries Ltd. and may not be reproduced, copied, disclosed or utilized in any way in whole or in part, without the prior written consent of Israel Aerospace Industries Ltd 1
2 About IAI Commercial Aircraft Group Business Jets Aero Assembly Capabilities Sea Land IAI - A World Leading Aerospace Company Largest defense and aerospace company in Israel, government owned Cutting edge technologies and solutions for: space, air, land, sea and cyber Development & manufacture of advanced systems for Israel armed forces and for foreign customers around the world Active in both the defense and commercial aviation markets This document contains proprietary information of Israel Aerospace Industries Ltd. and may not be reproduced, copied, disclosed or utilized in any way in whole or in part, without the prior written consent of Israel Aerospace Industries Ltd 2
3 IAI - A World Leading Aerospace Company Employees: 16,000 Annual Sales: 4B$ Backlog: 10B$ Reporting Company Global Company: Over 80% Export This document contains proprietary information of Israel Aerospace Industries Ltd. and may not be reproduced, copied, disclosed or utilized in any way in whole or in part, without the prior written consent of Israel Aerospace Industries Ltd 3
4 IAI Groups Systems Missiles & Space ELTA Systems Military Aircraft Commercial Aircraft BEDEK Aviation Engineering & Development This document contains proprietary information of Israel Aerospace Industries Ltd. and may not be reproduced, copied, disclosed or utilized in any way in whole or in part, without the prior written consent of Israel Aerospace Industries Ltd 4
5 Core Values Strengths Division IAI CAG at a Glance Quality Customers Commercial Aircraft Group - CAG This document contains proprietary information of Israel Aerospace Industries Ltd. and may not be reproduced, copied, disclosed or utilized in any way in whole or in part, without the prior written consent of Israel Aerospace Industries Ltd 5
6 Core Values Strengths Division IAI CAG at a Glance Quality Customers Our Core Values Leadership, Innovation, Quality Technological leadership and innovation in all group activities and business lines High level of quality and customer satisfaction QUALITY Core Values LEADERSHIP INNOVATION This document contains proprietary information of Israel Aerospace Industries Ltd. and may not be reproduced, copied, disclosed or utilized in any way in whole or in part, without the prior written consent of Israel Aerospace Industries Ltd 6
7 Core Values Strengths Division IAI CAG at a Glance Quality Customers Strengths Strong engineering capabilities in BTS (Design & Build) and BTP programs Years of experience in wide scale / complex programs integration Financial stability Investment in risk sharing programs based on business plan Robust world wide supply chain including suppliers in best cost countries This document contains proprietary information of Israel Aerospace Industries Ltd. and may not be reproduced, copied, disclosed or utilized in any way in whole or in part, without the prior written consent of Israel Aerospace Industries Ltd 7
8 Core Values Strengths Division IAI CAG at a Glance Quality Customers Production Technologies Aero Assemblies RAMTA Business Jets This document contains proprietary information of Israel Aerospace Industries Ltd. and may not be reproduced, copied, disclosed or utilized in any way in whole or in part, without the prior written consent of Israel Aerospace Industries Ltd 8
9 Core Values Strengths Division IAI CAG at a Glance Quality Customers IAI CAG at a Glance Business Jets Aerostructures Landing Gear Systems Marine Platforms Land Platforms This document contains proprietary information of Israel Aerospace Industries Ltd. and may not be reproduced, copied, disclosed or utilized in any way in whole or in part, without the prior written consent of Israel Aerospace Industries Ltd 9
10 Core Values Strengths Division IAI CAG at a Glance Quality Customers Quality Accreditations AS 9100C - Quality Management System NADCAP - 6 Special Processes Boeing Approval Inspection Delegation Authority ISO 9001: Quality Systems - Models for Q.A Federal Aviation Regulation (FAR) Part 21 - Order ACSEP CAAI, FAA, EASA & CAAC part Repair Station ISO 14001: Environmental Management System ISO 17025:2005- EN ANSI Z540-1 OHSAS Health and Safety System This document contains proprietary information of Israel Aerospace Industries Ltd. and may not be reproduced, copied, disclosed or utilized in any way in whole or in part, without the prior written consent of Israel Aerospace Industries Ltd 10
11 Core Values Strengths Division IAI CAG at a Glance Quality Customers This document contains proprietary information of Israel Aerospace Industries Ltd. and may not be reproduced, copied, disclosed or utilized in any way in whole or in part, without the prior written consent of Israel Aerospace Industries Ltd 11
12 Business Jets History Certification Experience G280 This document contains proprietary information of Israel Aerospace Industries Ltd. and may not be reproduced, copied, disclosed or utilized in any way in whole or in part, without the prior written consent of Israel Aerospace Industries Ltd 12
13 Business Jets History Certification Experience G280 Member of Exclusive Group of Companies Worldwide with FAR 25 Capability G280 G200 (GALAXY) Certification: August 2012 Certification: December 1998 G150 G100 (ASTRA SPX) 1125 ASTRA SP 1125 ASTRA Certification: November 2005 Certification: January 1996 Certification: May 1990 Certification: August JET COMMANDER 1123 COMMODORE JET 1124 WESTWIND I 1124A WESTWIND II Certification: November 1964 Line relocation to Israel: 1969 Certification: December 1971 Certification: March 1976 Certification: April 1980 This document contains proprietary information of Israel Aerospace Industries Ltd. and may not be reproduced, copied, disclosed or utilized in any way in whole or in part, without the prior written consent of Israel Aerospace Industries Ltd 13
14 Business Jets History Certification Experience G280 Certification Experience G280 - Certification basis: FAR 25 AMD. 117; CS AMD.1 G150 - Certification basis: FAR 25 AMD. 107 G200 (Galaxy) - Certification basis: FAR 25 AMD. 82 G100 (Astra SPX) - Certification basis: FAR 25 AMD. 80 Astra - Certification Basis: FAR 25 AMD. 54 This document contains proprietary information of Israel Aerospace Industries Ltd. and may not be reproduced, copied, disclosed or utilized in any way in whole or in part, without the prior written consent of Israel Aerospace Industries Ltd 14
15 Business Jets History Certification Experience G280 Significant improvement in operational performance Longest-range & highest-speed in its class Improved takeoff performance Excellent payload and time-to-climb Best-in-class cabin Longest cabin Superior cross-section Largest baggage volume Max TOW 39,600 lbs Passengers 2+10 IFR Range 3,600 nm Max Speed 0.85 M This document contains proprietary information of Israel Aerospace Industries Ltd. and may not be reproduced, copied, disclosed or utilized in any way in whole or in part, without the prior written consent of Israel Aerospace Industries Ltd 15
16 BTS & BTP Capabilities Fully Integrated Development Capabilities Metal Capabilities Composite Capabilities Hydraulic Capabilities Section Assembly One Stop Solution for Aerostructures This document contains proprietary information of Israel Aerospace Industries Ltd. and may not be reproduced, copied, disclosed or utilized in any way in whole or in part, without the prior written consent of Israel Aerospace Industries Ltd 16
17 Fully Engineering Integrated Capability Certification Flight Tests Manufacturing Systems Integration Avionics Reliability & Maintainability Heat Transfer Electrical Ground Tests Structural Analysis Flight Control Mechanical Systems Airframe & Detailed Design Geometric Definition Aerodynamics Wind Tunnel Tests Preliminary Design This document contains proprietary information of Israel Aerospace Industries Ltd. and may not be reproduced, copied, disclosed or utilized in any way in whole or in part, without the prior written consent of Israel Aerospace Industries Ltd 17
18 Structural Design & Analysis Structural concepts & detailed design Structural analysis, stress, loads, aero-elasticity, flutter, aero servo elasticity System installation and integration Fatigue and damage tolerance Weight control Advanced structural technologies This document contains proprietary information of Israel Aerospace Industries Ltd. and may not be reproduced, copied, disclosed or utilized in any way in whole or in part, without the prior written consent of Israel Aerospace Industries Ltd 18
19 Full Engineering Integrated Capabilities Flight sciences aerodynamics, CFD heat transfer, flight control Materials and processes metallurgy, composites, chemistry, physics, radomes, NDT Mechanical design fuel systems, landing gear, hydraulic, ECS, dynamics, engines Ground testing static & fatigue, mechanical systems, environmental This document contains proprietary information of Israel Aerospace Industries Ltd. and may not be reproduced, copied, disclosed or utilized in any way in whole or in part, without the prior written consent of Israel Aerospace Industries Ltd 19
20 Aerostructure Assembly Capabilities Tail Assembly Wing Assembly 50 years of know how in aircraft development, manufacturing & final assembly Major sections - Fully stuffed capabilities This document contains proprietary information of Israel Aerospace Industries Ltd. and may not be reproduced, copied, disclosed or utilized in any way in whole or in part, without the prior written consent of Israel Aerospace Industries Ltd 20
21 Aerostructure Assembly Capabilities Robotic cell operation, as part of G280 production line, for the following activities: Panel drilling Panel riveting (variety of fasteners) Automatic sealing Inspection This document contains proprietary information of Israel Aerospace Industries Ltd. and may not be reproduced, copied, disclosed or utilized in any way in whole or in part, without the prior written consent of Israel Aerospace Industries Ltd 21
22 Equipment Autoclave HDF CTL 6 Autoclaves Largest: 15 Dia. X 40 L Composite complex assemblies and sub-assemblies for commercial and military platforms CTL, hand lay-up and out of autoclave (RTM & LRI) Material cutting & lay-up systems This document contains proprietary information of Israel Aerospace Industries Ltd. and may not be reproduced, copied, disclosed or utilized in any way in whole or in part, without the prior written consent of Israel Aerospace Industries Ltd 22
23 Equipment T&D NDT CMM Composite trim & drill equipment NDT & CMM equipment This document contains proprietary information of Israel Aerospace Industries Ltd. and may not be reproduced, copied, disclosed or utilized in any way in whole or in part, without the prior written consent of Israel Aerospace Industries Ltd 23
24 B777 & B777X Programs Sole source of B777 & B777X empennage leading-edge assemblies Integral member of the design & build team Developed the replacement of the auxiliary front spar to 1 piece monolithic spar This document contains proprietary information of Israel Aerospace Industries Ltd. and may not be reproduced, copied, disclosed or utilized in any way in whole or in part, without the prior written consent of Israel Aerospace Industries Ltd 24
25 Engineering Aerostructures Assembly Composite Metal Hydraulic Tube & Ducts Innovation B787 Program Sections 46 & 47 packages: Passenger & cargo floor beams Pivot bulkhead Door surrounds Up to 12 Shipsets per month This document contains proprietary information of Israel Aerospace Industries Ltd. and may not be reproduced, copied, disclosed or utilized in any way in whole or in part, without the prior written consent of Israel Aerospace Industries Ltd 25
26 G280 Composite Tail Design & Build Horizontal stabilizer is a prepreg/autoclave structure, comprising integral skin with stringers Vertical stabilizer is a hybrid aluminum & prepreg/autoclave structure Rudder is a RTM structure, comprising an integral torsion box This document contains proprietary information of Israel Aerospace Industries Ltd. and may not be reproduced, copied, disclosed or utilized in any way in whole or in part, without the prior written consent of Israel Aerospace Industries Ltd 26
27 Nacelles Programs Goodrich F/C Door & Outer Barrels CF6-80-E1 for A330 Goodrich BTS/Risk Sharing Engine Air Inlet CFM56-5C A /300 Goodrich BTS/Risk Sharing Air Inlet +F/C P&W 305 This document contains proprietary information of Israel Aerospace Industries Ltd. and may not be reproduced, copied, disclosed or utilized in any way in whole or in part, without the prior written consent of Israel Aerospace Industries Ltd 27
28 Military Programs F16 F15 F15 vertical stabilizer & rudder - boron skin / titanium spar F16 vertical stabilizer skins - 90 plies of UD graphite tape, fracture critical I/R part with 550 drilled holes This document contains proprietary information of Israel Aerospace Industries Ltd. and may not be reproduced, copied, disclosed or utilized in any way in whole or in part, without the prior written consent of Israel Aerospace Industries Ltd 28
29 UH60 Program Replacement of metallic horizontal stabilator to innovative ONE SHOT composite integral box Benefits of ONE SHOT reduction of fasteners & parts 20% Cost & Weight Saving 1 st Shipset all composite materials in 9 months ARO! 1,500 shipsets delivered to date! This document contains proprietary information of Israel Aerospace Industries Ltd. and may not be reproduced, copied, disclosed or utilized in any way in whole or in part, without the prior written consent of Israel Aerospace Industries Ltd 29
30 Rotary Wing Programs Bell V280 nacelle s air inlet and RGB doors MD902 design & build entire top fairings structure US special forces CH53 cowlings re-design & manufacture honeycomb sandwich structure This document contains proprietary information of Israel Aerospace Industries Ltd. and may not be reproduced, copied, disclosed or utilized in any way in whole or in part, without the prior written consent of Israel Aerospace Industries Ltd 30
31 RADOMES Design & Build All types of radomes airborne, land and marine Antenna manufacturing & assembly BTS (design & build) capabilities This document contains proprietary information of Israel Aerospace Industries Ltd. and may not be reproduced, copied, disclosed or utilized in any way in whole or in part, without the prior written consent of Israel Aerospace Industries Ltd 31
32 Ti & Al large parts machining capabilities High end stretch forming capabilities Special processes This document contains proprietary information of Israel Aerospace Industries Ltd. and may not be reproduced, copied, disclosed or utilized in any way in whole or in part, without the prior written consent of Israel Aerospace Industries Ltd 32
33 Engineering Aerostructures Assembly Composite Metal Hydraulic Tube & Ducts Innovation Machining Stretch Forming Processes Machining Machining center for multi-axes parts for various aerospace programs 6 SNK 3 head profiler machines enable machining of 2-3 parts simultaneously Competitive in large parts (<12 m) made of titanium & stainless steel This document contains proprietary information of Israel Aerospace Industries Ltd. and may not be reproduced, copied, disclosed or utilized in any way in whole or in part, without the prior written consent of Israel Aerospace Industries Ltd 33
34 Machining Stretch Forming Processes Stretch Forming B777 LE F16 & F15 CFT 2 transversal stretch forming machines Forming parts: leading edge, aft fuselage, canopy fuselage, nose section & door panels Up to 2400 mm width & 6000 mm length This document contains proprietary information of Israel Aerospace Industries Ltd. and may not be reproduced, copied, disclosed or utilized in any way in whole or in part, without the prior written consent of Israel Aerospace Industries Ltd 34
35 Machining Stretch Forming Processes Mechanical Milling Most effective alternative to traditional chemical milling Mechanical milling advantages: Milling, routing, drilling, inspection & quality control in the same place without moving the part Higher accuracy Reduction of cycle time & labor cost Saving operational costs of chemical line and environmental issues All scraped aluminum is recyclable This document contains proprietary information of Israel Aerospace Industries Ltd. and may not be reproduced, copied, disclosed or utilized in any way in whole or in part, without the prior written consent of Israel Aerospace Industries Ltd 35
36 Machining Stretch Forming Processes Processing Center The processing center provides internal services in the following areas: Heat treatment Surface treatment Non destructive testing Chemical milling The heat & surface treatment services are for aluminum & hard metal parts This document contains proprietary information of Israel Aerospace Industries Ltd. and may not be reproduced, copied, disclosed or utilized in any way in whole or in part, without the prior written consent of Israel Aerospace Industries Ltd 36
37 Hydraulic 50 years experience in design & manufacturing of: Landing Gears Systems Actuators: hydraulic, electro-hydraulic & electromechanical Injectors Servo systems (accuracy of 1-2 mm) In-house capabilities for development of landing gear systems & actuators including: Design - from concept to detail design Analyses - stress, kinematic, dynamic, flow and thermal analyses Specifications for components and systems outsourcing design Qualification, development testing plans & certification This document contains proprietary information of Israel Aerospace Industries Ltd. and may not be reproduced, copied, disclosed or utilized in any way in whole or in part, without the prior written consent of Israel Aerospace Industries Ltd 37
38 Landing Gear Programs T-45A NOSE L/G 170 Sets Produced B Main & Nose L/G 165 Sets Produced More than 250 landing gears More than 2,000 sub-assemblies This document contains proprietary information of Israel Aerospace Industries Ltd. and may not be reproduced, copied, disclosed or utilized in any way in whole or in part, without the prior written consent of Israel Aerospace Industries Ltd 38
39 Landing Gear Programs IA63 MAIN (& NOSE) L/G More than 1,000 landing gears were delivered D328 Nose Landing Gear This document contains proprietary information of Israel Aerospace Industries Ltd. and may not be reproduced, copied, disclosed or utilized in any way in whole or in part, without the prior written consent of Israel Aerospace Industries Ltd 39
40 Actuators Programs B777 MLG & NLG Retract Actuators F16 Rudder BJ Aileron A380 Actuators This document contains proprietary information of Israel Aerospace Industries Ltd. and may not be reproduced, copied, disclosed or utilized in any way in whole or in part, without the prior written consent of Israel Aerospace Industries Ltd 40
41 Extensive In-House Production Capabilities Mill turn machines 5 axis multi-spindle machines Flexible machining centers (FMS) Numerous CNC lathes, milling & grinding machines Heat treatment facilities including vacuum furnaces Full range of surface treatment Plating & painting facilities Final assembly capabilities Qualification & acceptance testing This document contains proprietary information of Israel Aerospace Industries Ltd. and may not be reproduced, copied, disclosed or utilized in any way in whole or in part, without the prior written consent of Israel Aerospace Industries Ltd 41
42 Assembly & Testing Facilities This document contains proprietary information of Israel Aerospace Industries Ltd. and may not be reproduced, copied, disclosed or utilized in any way in whole or in part, without the prior written consent of Israel Aerospace Industries Ltd 42
43 Tubs & Ducts Various metals: aluminum, stainless steels, titanium Bending range: 3/16-7 Capabilities: engineering & tool design, forming, bending, machining, GTAW, brazing, NDT and pressure testing, insulating, painting and coating This document contains proprietary information of Israel Aerospace Industries Ltd. and may not be reproduced, copied, disclosed or utilized in any way in whole or in part, without the prior written consent of Israel Aerospace Industries Ltd 43
44 AFP RTM - Automatic Line Continues Improvement AFP Building of a fully automated assembly line for wing skins including state-of-the-art AFP machine First program secured by CAG - F35 wing skins This document contains proprietary information of Israel Aerospace Industries Ltd. and may not be reproduced, copied, disclosed or utilized in any way in whole or in part, without the prior written consent of Israel Aerospace Industries Ltd 44
45 AFP RTM - Automatic Line Continuous Improvement RTM Automatic Line IAI-CAG invests extensively in R&D, in order to maintain its competitive edge. In addition to internally and nationally funded programs, IAI is heavily involved in international R&D programs. These programs have focused on improvement of IAI capabilities in areas including structural bonding and RTM. This document contains proprietary information of Israel Aerospace Industries Ltd. and may not be reproduced, copied, disclosed or utilized in any way in whole or in part, without the prior written consent of Israel Aerospace Industries Ltd 45
46 AFP RTM - Automatic Line Process Continuous Improvement Continuous Improvement 100 Program Program 2 42% 54% Program 3 25% Universal Docking Device IAI-CAG invests in continuous improvement activities to reduce costs for our customers Investments in improvement of production processes & effectiveness DEMOLD Device This document contains proprietary information of Israel Aerospace Industries Ltd. and may not be reproduced, copied, disclosed or utilized in any way in whole or in part, without the prior written consent of Israel Aerospace Industries Ltd 46
47 Fast Patrol Boats Weapon Stations Super Dvora Mk3 Combat proven- nearly 120 worldwide Excellent range & endurance Precision stabilized weapon systems 27.4 X 5.65 X 1.3 m ; 45 Knots Operability - sea state 3 Survivability - sea state 6 Reliability & worldwide support This document contains proprietary information of Israel Aerospace Industries Ltd. and may not be reproduced, copied, disclosed or utilized in any way in whole or in part, without the prior written consent of Israel Aerospace Industries Ltd 47
48 Fast Patrol Boats Weapon Stations Super Dvora Multi Role Anti-missile early warning radar Advanced intelligence gathering & unique selfdefense capabilities Stabilized day / night electro-optic device Modern combat information center (CIC) Tactical precision short range missiles ( m) Precision long range missile launcher Stabilized cannon slaved to sensor payloads This document contains proprietary information of Israel Aerospace Industries Ltd. and may not be reproduced, copied, disclosed or utilized in any way in whole or in part, without the prior written consent of Israel Aerospace Industries Ltd 48
49 Fast Patrol Boats Weapon Stations Fast Composite Boats Ramta s diverse capabilities also include the building of fast patrol boats out of composite materials Manned & unmanned ultra-high speed interceptor boats - state of the art in the market, comprised of carbon fiber for maximum speed to weight ratio Combination of two core capabilities - composite material & maritime production Up to 30 mm remote controlled gun Two diesel engines Multi - mission innovative speed boat This document contains proprietary information of Israel Aerospace Industries Ltd. and may not be reproduced, copied, disclosed or utilized in any way in whole or in part, without the prior written consent of Israel Aerospace Industries Ltd 49
50 Fast Patrol Boats Weapon Stations Weapon Stations Typhoon Up to 30 mm with anti terror (AT/FP) surface fleet ammunition Remotely operated Effective target engagement Intuitive & simple operation Pinpoint accuracy ZU-23 - Marine Cannon Electrically Powered Ramta redesigned a legacy manually controlled weapon station to a state-of-theart electrically controlled one Optical sight LIZ Self-sustained power supply - 24 volts Double cannon - 23 mm This document contains proprietary information of Israel Aerospace Industries Ltd. and may not be reproduced, copied, disclosed or utilized in any way in whole or in part, without the prior written consent of Israel Aerospace Industries Ltd 50
51 Multi-mission armored ballistic and blast protection vehicles Anti-magnetic mine actuating device Actuates magnetically fused mines prior to entering their kill zone Mine & IED detection system Multi-sensor high performance metal detector array with ground penetrating radar Launchers & antennas structures Advanced engineering design, manufacturing & assembling This document contains proprietary information of Israel Aerospace Industries Ltd. and may not be reproduced, copied, disclosed or utilized in any way in whole or in part, without the prior written consent of Israel Aerospace Industries Ltd 51
52 Thank you This document contains proprietary information of Israel Aerospace Industries Ltd. and may not be reproduced, copied, disclosed or utilized in any way in whole or in part, without the prior written consent of Israel Aerospace Industries Ltd
IAI Israel Aerospace Industries
IAI Israel Aerospace Industries BEDEK Aviation Group - C-130 This document contains proprietary information of Israel Aerospace Industries Ltd. and may not be reproduced, copied, disclosed or utilized
More informationOEM-CERTIFIED AEROSTRUCTURES SOLUTIONS
OEM-CERTIFIED AEROSTRUCTURES SOLUTIONS BOEING AUSTRALIA COMPONENT REPAIRS With Boeing Australia Component Repairs Pty Ltd (BACR) the maintenance, repair and overhaul (MRO) of your aircraft structural components
More informationDEVELOPMENT OF XF-2 FIGHTER COMPOSITE STRUCTURES (COCURED COMPOSITE WINGS)
ID-1364 DEVELOPMENT OF XF-2 FIGHTER COMPOSITE STRUCTURES (COCURED COMPOSITE WINGS) Masami Kageyama 1 and Sinichi Yoshida 2 1 Technical Research and Development Institute, Japan Defense Agency, Tokyo, Japan
More informationGIVING AEROSPACE TOOLMAKERS A COMPETITIVE EDGE
PRECISION MACHINING & FINISHING GIVING AEROSPACE TOOLMAKERS A COMPETITIVE EDGE Since the 1970s Element Six has supplied high-performance supermaterials for use in aerospace precision machining and grinding
More informationThe Global Leader in Precision Parts
The Global Leader in Precision Parts Welcome to Century Specialties Company Overview Headquartered in Traverse City, MI, Century, Inc. is a privately held precision manufacturing company. Comprised of
More informationORLITE INDUSTRIES. Leading in Composite Materials Solutions. Transportation Sector Overview
ORLITE INDUSTRIES Leading in Composite Materials Solutions Transportation Sector Overview 20.9.2016 About Us Established in 1959, privately held company Core expertise development and manufacturing of
More informationLufthansa Perspectives on Safe Composite Maintenance Practices
Lufthansa Perspectives on Safe Composite Maintenance Practices Lufthansa Perspectives on Safe Composite Maintenance Practices Experience with composite components Damages on composite components Damage
More informationEGR-Contents. Standard Retractable Gear Contents. June 2005 EGR-Contents Page 1
Standard Retractable Gear Contents June 2005 EGR-Contents Page 1 EGR-Contents Chapter 1 - Introduction 1.1 - Overview...1-4 1.1.1 - Description... 1-4 1.1.2 - Getting Started... 1-4 1.1.3 - Video Tapes...
More informationOverview of Global Aerospace Parts Manufacturing Technologies
Overview of Global Aerospace Parts Manufacturing Technologies BOEING is a trademark of The Boeing Company. Pradip K. Saha Technical Fellow Boeing Research & Technology The Boeing Company Seattle, WA Symposium
More informationASSEMBLY MANUAL FOR THE LANCAIR LEGACY
ASSEMBLY MANUAL FOR THE LANCAIR LEGACY Chapter 1 REV. 0/02-15-02 1-1 INTRODUCTION Chapter 1 REV. 0/02-15-02 1-2 INTRODUCTION Contents Chapter 1: Introduction... 1-3 1. INTRODUCTION... 1-4 A. Recommended
More informationStructural development and optimization of rotor blades for wind turbines Lessons from the aerospace industry. Josef Mendler Christoph Katzenschwanz
Structural development and optimization of rotor blades for wind turbines Lessons from the aerospace industry Josef Mendler Christoph Katzenschwanz ACENTISS 2009 1 Design Study of Segmented Rotor Blades
More informationIMCO. A sterling reputation is the best recommendation
IMCO A sterling reputation is the best recommendation Harness experience and performance A track record of decades For close to four decades, IMCO has been customizing, supplying and supporting a full
More informationGOLAN INDUSTRIES Unclassified
GOLAN INDUSTRIES 1 This document contains proprietary information of Israel Aerospace Industries Ltd. and may not be reproduced, copied, disclosed or utilized in any way, in whole or in part, without the
More informationAEROSPACE & DEFENSE MEETINGS TORINO 2015 REGISTRATION FORM FOR BUYERS ONLY
AEROSPACE & DEFENSE MEETINGS TORINO 2015 REGISTRATION FORM FOR BUYERS ONLY This form is very important as the provided information on your required technologies and capabilities will make up your profile
More informationTrends in the Aerostructures Composite Supply Chain
A premier aerospace and defense company Trends in the Aerostructures Composite Supply Chain SpeedNews Aerospace Raw Materials & Manufacturers Supply Chain Conference March 2011 Tim Shumate ATK Aerospace
More informationCivil Helicopter Capabilities Vector Aerospace - UK
SETTING THE STANDARD OF CUSTOMER SERVICE Civil Helicopter Capabilities Vector Aerospace - UK Civil Helicopter Overview A complete package of helicopter support services across civil and military platforms
More informationCHAPTER 4 FUSELAGE TABLE OF CONTENTS
CHAPTER 4 FUSELAGE TABLE OF CONTENTS INTRODUCTION... 3 GENERAL... 3 FORWARD FUSELAGE... 3 STRUCTURE... 3 WINDSHIELDS AND WINDOWS... 5 CREW DOORS... 6 HINGED PANEL... 6 CARGO/PASSENGER DOORS... 7 POWERPLANT
More informationSD3-60 AIRCRAFT MAINTENANCE MANUAL
AMM 53-00-00 1.0.0.0FUSELAGE - DESCRIPTION 1. General This chapter provides a general description of the basic fuselage structure, minus furnishings, equipment, doors and windows; the latter are dealt
More informationNoise Attenuation and Control for Business Aircraft
Page 1 We Silence Your Critical Noise Applications Noise Attenuation and Control for Business Aircraft ITT aerospace product lines are continually expanding to provide our customers with unique solutions
More informationGeneral Dynamics at a Glance
General Dynamics at a Glance 2017 Revenues: $31 billion ~98,000 employees worldwide 10 business units in 4 operating groups Aerospace Combat Systems IS&T Marine Systems Businesses: Gulfstream, Jet Aviation
More informationToho Tenax Americas Carbon Fiber Presentation Carlos Leao Leutewiler Sales and Marketing Manager South America October, 2017
Toho Tenax Americas Carbon Fiber Presentation Carlos Leao Leutewiler Sales and Marketing Manager South America October, 2017 cleutewiler@tohotenax-us.com Mobile: +5511 98706-1766 2. Company Overview
More informationCurrent and Future Manufacturing Technologies for Fabricating Aerospace Structures With Titanium Alloys
Engineering, Test & Technology Boeing Research & Technology Current and Future Manufacturing Technologies for Fabricating Aerospace Structures With Titanium Alloys Dan Sanders Senior Technical Fellow Metals
More informationCONTENTS. Introduction The GKN Aerospace Western Approach facility... 4
CONTENTS Introduction... 3 The GKN Aerospace Western Approach facility... 4 Spar lay-up A350XWB rear wing spar lay-up... 5 A400M wing spar lay-up... 7 Wing spar manufacture... 8 Wing spar assembly... 10
More informationSD3-60 STRUCTURAL REPAIR MANUAL CRITICAL BASELINE STRUCTURE
SD3-60 STRUCTURAL REPAIR MANUAL z SRM 1.0.0.0FATIGUE CRITICAL BASELINE STRUCTURE 1. General Some approved repairs in each chapter of this manual affect the Fatigue Critical Baseline Structure (FCBS). 14
More informationALJO ALUMINIUM-BAU JONUSCHEIT GMBH INNOVATION IN ALUMINIUM PROCESSING
ALJO ALUMINIUM-BAU JONUSCHEIT GMBH INNOVATION IN ALUMINIUM PROCESSING ABOUT ALJO / LOCATION 07.07.2015 2 ABOUT ALJO / FACTS & FIGURES EXPERTS IN ALUMINIUM PROCESSING More than 40 years experience Family
More informationTitanium Presented by: Jeff Masingill Director of Sales & Marketing
Titanium 2010 Presented by: Jeff Masingill Director of Sales & Marketing Ducommun Discussion Agenda Ducommun Overview Titanium Military Structures Capabilities Brief Titanium Solutions Initiatives Future
More informationebook How to Capitalize on Industrial Metal 3D Printing with Sciaky s Electron Beam Additive Manufacturing (EBAM ) Technology
ebook How to Capitalize on Industrial Metal 3D Printing with Sciaky s Electron Beam Additive Manufacturing (EBAM ) Technology Contents 3-5 How EBAM Works 6 EBAM Part Candidates 7 EBAM Part Scalability
More information'W inôusrrialprôfiles & SHEETS
dualtech 'W inôusrrialprôfiles & SHEETS PRODUCT CATALOGUE -CONSTRUCTION -SHIP BUILDING -RAIL TRANSiT -AUTOMOTIVE -AVIATION -POWER & ELECTRONICS Aluminum and aluminum alloy provide some good properties
More informationAdvanced Composite Structural Materials in Business Jets. Michael J. Hoke President, Abaris Training Resources Inc.
Advanced Composite Structural Materials in Business Jets Michael J. Hoke President, Abaris Training Resources Inc. www.abaris.com 1 Abaris Training Resources Inc. Advanced Composite Manufacturing and Repair
More informationCreating an Aerospace Future
Creating an Aerospace Future Causeway Aero Limited has been formed by five SC21 accredited Northern Ireland aerospace companies who have come together to offer combined capabilities to the aerospace sector.
More informationPride Pace Passion. Aerospace Defence Marine Power Generation Nuclear
Pride Pace Passion Aerospace Defence Marine Power Generation Nuclear Fully integrated precision manufacturing and assembly solutions Bromford Industries is a privately owned enterprise trading on a global
More informationXLR-Contents. XL Retractable Gear Contents. June 2005 XLR-Contents Page 1
XLR-Contents XL Retractable Gear Contents June 2005 XLR-Contents Page 1 XLR-Contents Chapter 1 - Introduction 1.1 - Overview...1-4 1.1.1 - Description... 1-4 1.1.2 - Getting Started... 1-4 1.1.3 - Video
More informationFAA Workshop on Adhesive Bonding. Ch. KAUFFMANN Head of Technology Department
0 FAA Workshop on Adhesive Bonding Ch. KAUFFMANN Head of Technology Department SUMMARY Company and Products presentation Presentation of typical sandwich structures Design criteria Materials used in bonded
More informationDevelopments and Challenges for Aluminum A Boeing Perspective
Proceedings of the 9 th International Conference on Aluminium Alloys (2004) Edited by J.F. Nie, A.J. Morton and B.C. Muddle Institute of Materials Engineering Australasia Ltd 24 Developments and Challenges
More information'W inôusrrialprôfiles & SHEETS
dualtech 'W inôusrrialprôfiles & SHEETS PRODUCT CATALOGUE -CONSTRUCTION -SHIP BUILDING -RAIL TRANSiT -AUTOMOTIVE -AVIATION -POWER & ELECTRONICS Aluminum and aluminum alloy provide some good properties
More informationDesign of a High-g Unmanned Aerial Vehicle Structure
Design of a High-g Unmanned Aerial Vehicle Structure Seth S. Kessler, S. Mark Spearing and Greg A. Kirkos TECHNOLOGY LABORATORY FOR ADVANCED COMPOSITES Department of Aeronautics and Astronautics Massachusetts
More informationAirline Perspectives on the Constraints of Bonded Repair Size Limits
May 17th, 2011 Presented by: Todd M. Herrington Principal Engineer Composite / Bonded Repair May 17th, 2011 Part 1 Examples of OEM authorized repairs by part type Part 2 Examples of damages not supported
More informationCASE STUDY. Composites in Aerospace Case Studies
CASE STUDY Composites in Aerospace Case Studies A workshop on Living with Composites - Lessons Learnt in the Use of Composites on Aerospace and Marine Structures National Oceanography Centre, Southampton,
More informationTECHNICAL MANUAL HELICOPTER, ATTACK AH-1S (MOD) NSN
TECHNICAL MANUAL AVIATION UNIT AND INTERMEDIATE MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LISTS (INCLUDING DEPOT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS) HELICOPTER, ATTACK AH-1S (MOD) This manual
More informationCompany. ACT The Integrated Solution
ACT The Integrated Solution Our Formed in 2002 Specifically to Support Fielded F-16s Encouragement from LM Aero and USAF Log Command Majority Interest Owned by HEICO Corporation Cage Code 1XKR3 Based In
More informationGDLS Scranton Operations
GDLS Scranton Operations The Power of Innovation General Dynamics Land Systems GDLS Scranton Operations is a component machining and assembly facility whose mission is to provide industry-best turnaround
More informationmetal & precision Binder Technologie innovative metal technology for your peak performance and market lead aerospace
metal & precision Binder Technologie innovative metal technology for your peak performance and market lead aerospace experience & quality Binder Technologie a creative and experienced solution finder for
More informationAdvantages of Composite Materials in Aircraft Structures
Advantages of Composite Materials in Aircraft Structures Muniyasamy Kalanchiam, and Moorthy Chinnasamy Abstract In the competitive environment of aircraft industries it becomes absolutely necessary to
More informationMetallurgical Innovations and Critical Parts for the Defence & Aerospace Industries
Raw Materials Week November 8 th, 2017, Brussels Metallurgical Innovations and Critical Parts for the Defence & Aerospace Industries Laurent CORBIER Vice-President, Public Affairs, ERAMET CONTENT ERAMET
More informationEnvironmental Control Systems Conveyance Technology and Innovation
Environmental Control Systems Conveyance Technology and Innovation ITT Facilities at a Glance ITT opened a new Center of Excellence in Nogales, Mexico for ECS components that compliments our Valencia,
More informationDeutsche Bank s 13 th Annual Global High Yield Conference. September 29, 2005
Deutsche Bank s 13 th Annual Global High Yield Conference September 29, 2005 Forward-looking Statements Risks, Uncertainties, Other Factors with Respect to Forward- Looking Statements Certain statements
More informationOPMOS - Open Pit Mine
OPMOS - Open Pit Mine Optimization System Advanced Robotic Solution for Future Mining This document contains proprietary information of Israel Aerospace Industries Ltd. and may not be reproduced, copied,
More informationAirplane Design Part V: Component Weight Estimation Table of Contents
TABLE OF SYMBOLS ACKNOWLEDGEMENT 1. INTRODUCTION 2. CLASS I METHOD FOR ESTIMATING AIRPLANE COMPONENT WEIGHTS 2.1 A METHOD FOR ESTIMATING AIRPLANE COMPONENT WEIGHTS WITH WEIGHT FRACTIONS 2.2 EXAMPLE APPLICATIONS
More informationISO 9001 AS 9100 AQAP Excellence in low volume production
ISO 9001 AS 9100 AQAP 2110 Excellence in low volume production History 1978 Start subcontracting activities in machining for Aerospace markets 1992 MBO sheet metal activities from Thales 2000 Integration
More informationFigure 4: Preforming of PMC LDB
COMPOSITE MATERIALS FOR STRUCTURAL LANDING GEAR COMPONENTS Tjaard Sijpkes and Peet Vergouwen SP aerospace and vehicle systems bv Geldrop, The Netherlands ABSTRACT The paper presents the developments at
More informationInvestor Presentation. August 2016
Investor Presentation August 2016 Forward Looking Statements This presentation contains forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. Forward-looking
More informationFounded On a Breakthrough Process
Metal Bellows Senior Aerospace Metal Bellows is dedicated to providing custom engineered solutions to our clients' engineering and manufacturing challenges. By applying advanced engineering and manufacturing
More informationAPPLIED ENGINEERING, INC.
Founded in 1965, Applied Engineering specializes in the precision machining of aluminum components for a wide range of applications in several different industries. These industries including Communications
More informationCHECK OUR COMPETENCES CHOOSE YOUR INSERTION POINT
international partnership CHOOSE YOUR INSERTION POINT the synergy of Companies and a qualified network to grow up ENG&SUPPORT aviation approvals MS certification MRO support member of TESTING testing qualification
More informationRepublic of Armenia, Yerevan, Vardanants st. 18/ (60) (499)
Republic of Armenia, Yerevan, Vardanants st. 18/2 + 374 (60) 54 60 21 + 7 (499)346 03 21 info@progresstech.am Company Progresstech-Armenia is the leading Armenian Engineering Center based in Yerevan since
More informationAirline Perspectives on the Constraints of Bonded Repair Size Limits
May 17th, 2011 Presented by: Todd M. Herrington Principal Engineer Composite / Bonded Repair May 17th, 2011 Part 1 Examples of OEM authorized repairs by part type Part 2 Examples of damages not supported
More informationCSFB/Aviation Week. Aerospace & Defense Conference. December 6, 2005
CSFB/Aviation Week Aerospace & Defense Conference December 6, 2005 Forward-looking Statements Risks, Uncertainties, Other Factors with Respect to Forward- Looking Statements Certain statements contained
More informationCOMPOSITE LANDING GEAR COMPONENTS FOR AEROSPACE APPLICATIONS
24 TH INTERNATIONAL CONGRESS OF THE AERONAUTICAL SCIENCES COMPOSITE LANDING GEAR COMPONENTS FOR AEROSPACE APPLICATIONS H.G.S.J. Thuis National Aerospace Laboratory NLR Keywords: Composites, Resin Transfer
More informationEngineering, Test & Technology
Engineering, Test & Technology Paul Pasquier Vice President ET&T Supplier Management 1 2050 focus areas Solutions for developing countries Low-stress travel Regional and urban mobility Connectivity and
More informationIndustry Meeting. Minutes
Industry Meeting Friday, April 17 th, 2015 at 7:00am at the Northrop Facilities Minutes Members Present: Orville Dothage, Rodney Black, Lupe Delgado, and Maria Clinton. I. Courses a. Course Descriptions
More informationVOUGHT AIRCRAFT INDUSTRIES, INC.
AIRCRAFT INDUSTRIES, INC. P.O Box 655907 Dallas, TX 75265-5907 Cage Code 80378 VSS SL-0 REV. DATE OF ISSUE: SHEET OF 8 : SUPERSESSION LIST OF HERITAGE STANDARD SPECIFICATIONS TRANSITION FROM This document
More informationINDUSTRY COMPOSITE SOLUTIONS FOR THE AEROSPACE INDUSTRY COMPOSITE SOLUTIONS FOR THE AEROSPACE INDU
OMPOSITES INDUSTRY COMPOSITE SOLUTIONS FOR THE AEROSPACE INDUSTRY COMPOSITE SOLUTIONS FOR THE AEROSPACE INDU CONTENTS Introduction 3 Value Engineering for Design and Performance 4 Quality Assurance that
More informationState of Maine Welding Technology Center 20 Hutcherson Drive Gorham, Me (207)
www.dgmachine.com State of Maine www.dgmachine.com Steve Sullivan Vice President Steve@dgmachine.com Cell: 207-653-7922 John Doran Sales Manager Johnd@dgmachine.com Cell: 207-233-4830 Precision Machining
More informationThe highest standard of Line & Base Maintenance services with versatile technicians
Technical Training Computer Based Training (CBT) Classroom The source of our achievement is highquality human resources. The Korean Air Maintenance Training Center is fully equipped with specialized classrooms,
More informationComposite Technologies from Cobham Antenna Systems
Composite Technologies from Cobham Antenna Systems Maintaining precision in the most demanding applications The most important thing we build is trust ON LAND AT SEA IN THE AIR A Wealth of Experience A
More informationA.Vasudevan 1, M.K.Karthik 2, K.Manoj kumar 3, A.Shabana 4 1,2,3,4 Assistant professor, Hindusthan college of Engineering and Technology, Coimbatore.
Design and modal analysis of bulkhead for a trainer aircraft A.Vasudevan 1, M.K.Karthik 2, K.Manoj kumar 3, A.Shabana 4 1,2,3,4 Assistant professor, Hindusthan college of Engineering and Technology, Coimbatore.
More informationSimulating Composite Structures
White Paper Simulating Composite Structures Composites pose different modeling challenges because of the nature of the material. With the right simulation tools, designers can predict performance, analyze
More informationPrecision CNC Machining Complex Parts for Critical Applications
1 Precision CNC Machining Complex Parts for Critical Applications AS9100 Rev D Certified ITAR Compliant DUNS: 620934716 CAGE Code:. 855Z8 DLA Registered MIZA Business Company Champion Caliber Components
More informationSPECIAL MACHINED PRODUCTS LTD FIRST STAGE AND PRECISION CNC MACHINING
SPECIAL MACHINED PRODUCTS LTD FIRST STAGE AND PRECISION CNC MACHINING is equipped with over 40 machine tools to provide customers with a wide range of machining services, from first stage turning / boring
More information5. Maritime Electrical Fitter. 9. Machinist Advanced Manufacturing Engineering 2. Aerospace Manufacturing Electrical/Mechanical and Systems Fitter
ST0457/01 Apprenticeship Standard for an Engineering Technician The following Standard reflects employers requirements for the skills, knowledge and behaviours expected from someone to be competent in
More informationwaterjet cutting expertise in Byjet The flexible waterjet cutting system for demanding applications
expertise in waterjet cutting Byjet The flexible waterjet cutting system for demanding applications 2 Byjet flexible, powerful, reliable The high-performance waterjet cutting systems in the Byjet range
More informationComparison of Novel Resin Transfer Moulding, Pre-Preg Autoclave and Metallic CNC Manufacturing for UAV Spars. Composites Centre
Comparison of Novel Resin Transfer Moulding, Pre-Preg Autoclave and Metallic CNC Manufacturing for UAV Spars ICMAC Belfast 18 th March 2009 Andrew Mills, James Hurley SAS Cranfield University a.r.mills@cranfield.ac.uk
More informationNUT PLATE SOLUTIONS RIVETLESS NUT PLATE. Over 15 Years of Proven Service History FATIGUE TECHNOLOGY ADVANTAGES OVER OTHER NUT PLATE SYSTEMS:
RIVETLESS NUT PLATE ADVANTAGES OVER OTHER NUT PLATE SYSTEMS: 3 to10 times fatigue life improvement Installs over 6 times faster Rivetless and adhesive-free for superior process reliability Engineered NUT
More informationNew Challenges for Airlines/MRO dealing with New generation of Composite Aircrafts
New Challenges for Airlines/MRO dealing with New generation of Composite Aircrafts APATS 27-29 Sept 2018 C. BOSQ, Head of structure training Training Services P. LAPLACE, Structure Program manager Training
More informationwaterjet cutting expertise in ByJet Pro The precise waterjet cutting system for unmatched productivity
expertise in waterjet cutting ByJet Pro The precise waterjet cutting system for unmatched productivity ByJet Pro productive, multifunctional, precise and clever Waterjet cutting systems of the ByJet Pro
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS P/N BI 1003 FLOW THROUGH ANTI-ICE SYSTEM KING AIR 200 KIT P/N BI 1001-1 11/08/06 REV: F DRAWING NUMBER BI 1003 REV. F PAGE 1 IMPORTANT NOTICE THE BUTTERFIELD INDUSTRIES FLOW-THROUGH
More informationResource for Composite Tooling and Parts Fabrication Since 2000
RJM Corporation Resource for Composite Tooling and Parts Fabrication Since 2000 (Our mission is to provide our customers with quality products on time at competitive prices) RJM Corporation 3220 C Street
More informationMachining. Shrewsbury Facility
Machining Maximum component size diameter 1500mm Multiple and dedicated fixture storage adjacent to machine cells Semi-auto loading and quick location systems Offline tool setting and storage Plasma and
More informationI N T E R N A T I O N A L LT D
INTERNATIONAL LT D Leaders in investment and sand casting. Aeromet is a leading supplier of aluminium and magnesium castings, and fully-finished, assembly ready cast parts for the aerospace and defence
More informationMANUFACTURING SOLUTIONS FOR FORMING, JOINING AND ASSEMBLY AEROSPACE APPLIANCE AVIATION AUTOMOTIVE BEVERAGE DEFENSE ENERGY HEAVY EQUIPMENT
MANUFACTURING SOLUTIONS FOR FORMING, JOINING AND ASSEMBLY AEROSPACE APPLIANCE AVIATION AUTOMOTIVE BEVERAGE DEFENSE ENERGY HEAVY EQUIPMENT Manufacturing Your Success WHAT WE DO Coldwater Machine Company
More informationINDEPENDENT MACHINING SERVICE COMPANY. Technological capabilities
INDEPENDENT MACHINING SERVICE COMPANY Technological capabilities RESIF at a glance 1993 Foundation >150 Specialists Company has been engaged in smart precision machining for 25 years. We make parts and
More informationIntroduction to Aerospace Engineering
Introduction to Aerospace Engineering Lecture slides Challenge the future 1 Structures Aircraft & spacecraft shell structures Faculty of Aerospace Engineering 22-11-2011 Delft University of Technology
More informationOne Nation... Infinite Possibilities! HVOF Plasma Arc Spray. NADCAP FAA Repair AS9100 with ISO
One Nation... Infinite Possibilities! HVOF Plasma Arc Spray NADCAP FAA Repair AS9100 with ISO www.nationcoating.com Nation Coating s Four Major Thermal Spray Technologies HVOF High velocity oxy / fuel
More informationSOME MANUFACTURING ACTIVITIES IN JAPANESE AIRCRAFT INDUSTRIES (JAI)
ICAS 2002 CONGRESS SOME MANUFACTURING ACTIVITIES IN JAPANESE AIRCRAFT INDUSTRIES (JAI) Yoichi Sugimura Japan Aircraft Development Corporation Keywords: Japan, Manufacturing, Cost reduction Abstract Japanese
More informationAlcoa Aerospace: Value, Technology and Augustine s Law #16
Alcoa Aerospace: Value, Technology and Augustine s Law #16 Aviation Week s Executive Summit, Denver, CO June 5, 2012 v2 Cautionary Statement Forward-Looking Statements This presentation contains statements
More informationDefense Technical Information Center Compilation Part Notice ADPOI0410
UNCLASSIFIED Defense Technical Information Center Compilation Part Notice ADPOI0410 TITLE: Technology Trends for Future Business Jet Airframe DISTRIBUTION: Approved for public release, distribution unlimited
More informationUNMANNED SURFACE VESSEL (USV)
UNMANNED SURFACE VESSEL (USV) UNMANNED SURFACE VESSEL (USV) By using Arma-Tech Tactical Autonomous Control Kit (ATTACK), the vessel can operate independently or combined in swarm. Completely autonomously
More informationKESTREL GROUP AIRCRAFT CERTIFICATION, ENGINEERING, MODIFICATIONS AND CUSTOM DESIGN
KESTREL GROUP AIRCRAFT CERTIFICATION, ENGINEERING, MODIFICATIONS AND CUSTOM DESIGN Aircraft Certification & Engineering We are proud to provide customized engineering and certification services in support
More informationThrust Area Working Group # 3 Composites. Product and Technology Roadmap Overview
Thrust Area Working Group # 3 Composites Product and Technology Roadmap Overview Oct 29, 2013 Composite Product and Technology Roadmap Product Market Customers & competition Technology Disruptors Customer
More informationARMY RDT&E BUDGET ITEM JUSTIFICATION (R-2 Exhibit)
BUDGET ACTIVITY ARMY RDT&E BUDGET ITEM JUSTIFICATION (R-2 Exhibit) PE NUMBER AND TITLE 2 - Applied Research 0602105A - MATERIALS TECHNOLOGY COST (In Thousands) FY 2002 FY 2003 FY 2004 FY 2005 FY 2006 FY
More informationSenior plc. Based in Rickmansworth, UK. Two operating markets and 27 total companies.
Jet Products Senior plc. Based in Rickmansworth, UK. Two operating markets and 27 total companies. Total Senior plc sales: 2008: $833m 2009: $800m 2010: $840m 2011: $1B Senior Aerospace Division, 16 companies,
More informationBGA Airworthiness and Maintenance Procedure COMPLEX MAINTENANCE (AMP 2-13) Version 1.2 Effective date 1 Feb Contents:
BGA Airworthiness and Maintenance Procedure COMPLEX MAINTENANCE (AMP 2-13) Version 1.2 Effective date 1 Feb 2016 Contents: 1. Compliance with Part M and BCAR A8-24 2. Complex maintenance tasks 3. Authority
More informationAirframes Instructor Training Manual. Chapter 2 MATERIALS
Learning Objectives Airframes Instructor Training Manual Chapter 2 MATERIALS 1. The purpose of this chapter is to make you aware of the many different materials employed in an aircraft s structure, it
More informationJeff Turner President and Chief Executive Officer Credit Suisse Aerospace and Defense Conference December 6, 2006
Spirit A Leader in Aerospace Jeff Turner President and Chief Executive Officer Credit Suisse Aerospace and Defense Conference December 6, 2006 1 Our Message Successful IPO Validated strategy, performance,
More informationMission Support Overhauls U.S. Air Force B-52s using Verisurf Reverse Engineering Software
Mission Support Overhauls U.S. Air Force B-52s using Verisurf Reverse Engineering Software Mission Support Inc. has pioneered the combination of sheet metal fabrication and modern computeraided design
More informationARMY RDT&E BUDGET ITEM JUSTIFICATION (R2 Exhibit)
Exhibit R-2 0708045A End Item Industrial Preparedness Activities ARMY RDT&E BUDGET ITEM JUSTIFICATION (R2 Exhibit) COST (In Thousands) FY 2005 FY 2006 FY 2007 FY 2008 FY 2009 FY 2010 FY 2011 Cost to Complete
More informationInnovative Solutions for Aerospace and Defense
Innovative Solutions for Aerospace and Defense Featuring DARCHEM, TA, HYTEK FINISHES, and NMC AEROSPACE Products Innovative Solutions for Environmental Extremes As today s aircraft manufacturers expand
More informationCustomer Keynote. Accelerating Supply Chain Performance
Customer Keynote Michael (Mike) Taylor Director, Global Supply Chain F-35 Program, Aerospace Systems, Military Aircraft Systems Mike is responsible for all Global Supply Chain activities in support of
More informationDesign and operation of the FLIR turret
Forward looking infra red camera turret 047 John Blackburn Defence, Aerospace and Communications Atkins Nedtech Netherlands Abstract The challenge set by this project was to produce a design for the synchronised
More informationPassenger Boarding Bridges
Passenger Boarding Bridges Enhancing airport operations worldwide Improving turnaround operations and ensuring total safety and comfort for both passengers and operators AIRPORT ENGINEERING SOLUTIONS ADELTE,
More information