88A-200 Series. Carbon Steel ASME Class 150 Flanged Full Port Ball Valve -
|
|
|
- Vivian Griffin
- 6 years ago
- Views:
Transcription
1 88A-200 Series Carbon Steel ASME Class 150 Flanged Full Port Ball Valve - MATERIALS OF CONSTRUCTION Description (1/2 & 3/4 Valves) Material 2. Retainer ASTM A108 Type Ball ASTM A108 Type Stem Nut 300 Series Stainless Steel 9. Lever 300 Series Stainless Steel w/vinyl Grip 10. Stem Bearing RPTFE 11. Stop 300 Series Stainless Steel 12. Body Seal RPTFE 13. Lock Washer 300 Series Stainless Steel 14. Grounding Spring ASTM A313 Stainless Steel 15. Grounding Spring ASTM A313 Stainless Steel Description (1 Valves) Material 2. Retainer ASTM A108 Type Ball ASTM A108 Type 1215 Chrome Plated 8. Gland Screws ASTM A193 B7 9. Gland Plate 302 or 304 SS 10. Stem Nut 316 SS 11. Lever ASTM A366 Steel with Vinyl Grip 12. Stem Bearing RPTFE 13. Stop ASTM A108 Type Stop Screw SAE J429 Grade Lock Plate ASTM A366 Steel 16. Body Seal RPTFE 17. Lockwasher 302 or 304 SS 18. Grounding Spring SS 1/2 through 1 VARIATIONS AVAILABLE: 88A-240 Series (316 SS Ball & Stem) 88A-230 Series (Ni-Cu Ball & Stem) OPTIONS AVAILABLE: (SUFFIX) OPTION -01- Standard -10- SS Lever and Nut -14- Side Vented Ball (Uni-Directional) -15- Wheel Handle, Steel -21- UHMWPE Seats -24- Fire Safe (Graphite Packing and Seal) -35- PTFE Seats and Seals -38- PEEK Seats and Graphite Packing -49- Assembled Dry -60- Grounded Ball and Stem -65- MPTFE Seats and Graphite Packing -67- Cleaned For Industrial Gases -69- Drilled and Tapped Purge Port with Plug Extended Bonnet SS Spiral Wound Gaskets w/ptfe Filler -76- Live Loaded 87A/88A Series (Lever) -77- Live Loaded (Gear & Actuator) -80- Multi-Seal (Super TFE) 87A/88A Series -TC- With Test Certificate -TD- Tested to API Spec 6D -UL- UL & CSA Listed (w/markings) For Pressure/Temperature Ratings, Refer to Page M-7, Graph No. 1 1/2 & 3/4 Valve 1 Valve NUMBER SIZE A B C D E F G H I J K L M WT. 88A / A / / A / D-23
2 88A-200 Series Carbon Steel ASME Class 150 Flanged Full Port Ball Valve - 1-1/2 through 2-1/2 MATERIALS OF CONSTRUCTION Description Material 2. Retainer ASTM A216 WCB 3. Ball ASTM A216 WCB or A216 WCB Chrome Plated 8. Gland Screws ASTM A193 B7 9. Gland Plate 302 & 304 SS 10. Stem Nut ASTM A194 Grade 8l 11. Lever ASTM A366 Steel with Vinyl Grip 12. Stem Bearing RPTFE 13. Stop ASTM A108 Type Stop Screw SAE J429 Grade Lock Plate ASTM A366 Steel 16. Body Seal RPTFE 17. Grounding Spring SS 18. Body Joint Stud ASTM A193 Grade B7 19. Body Joint Nut ASTM A194 Grade 2H 20. Lockwasher 302 or 304 SS For Pressure/Temperature Ratings, Refer to Page M-7, Graph No. 1 VARIATIONS AVAILABLE: 88A-240 Series (316 SS Ball & Stem) 88A-230 Series (Ni-Cu Ball & Stem) OPTIONS AVAILABLE: (SUFFIX) OPTION -01- Standard -10- SS Lever and Nut -14- Side Vented Ball (Uni-Directional) -15- Wheel Handle, Steel -21- UHMWPE Seats -24- Fire Safe (Graphite Packing and Seal) -35- PTFE Seats and Seals -38- PEEK Seats and Graphite Packing -49- Assembled Dry -59- SS External Trim -60- Grounded Ball and Stem -65- MPTFE Seats and Graphite Packing -67- Cleaned For Industrial Gases -69- Drilled and Tapped Purge Ports with Plugs Extended Bonnet SS Spiral Wound Gaskets w/ptfe Filler -76- Live Loaded 87A/88A Series (Lever) -77- Live Loaded (Gear & Actuator) -80- Multi-Seal (Super TFE) 87A/88A Series -MG- Gear Operator with Standard Handwheel -MH- Gear Operator with Standard Handwheel & -MJ- Gear Operator with Oversize Handwheel -MK- Gear Operator with Oversize Handwheel & -TC- With Test Certificate -TD- Tested to API Spec 6D -UL- UL & CSA Listed (w/markings) NUMBER SIZE A B C D E F G H I J K L M WT. 88A / / A / A / / D-24
3 88A-200 Series Carbon Steel ASME Class 150 Flanged Full Port Ball Valve - 3 through 6 MATERIALS OF CONSTRUCTION Description Material 2. Retainer ASTM A216 WCB 3. Ball ASTM A108 Type 1215 or A216 WCB Chrome Plated 8. Gland Screws ASTM A193 B7 9. Gland Plate 316 SS 10. Adapter Screw 316 SS 11. Handle Adapter ASTM A366 Steel with Vinyl Grip 12. Stem Bearing RPTFE 13. Stop ASTM A108 Type Stop Screw SAE J429 Grade Lock Plate ASTM A366 Steel 16. Body Seal RPTFE 17. Grounding Spring SS 18. Body Joint Stud ASTM A193 Grade B7 19. Body Joint Nut ASTM A194 Grade 2H 20. Pipe Handle Galvanized Steel (not shown) For Pressure/Temperature Ratings, Refer to Page M-7, Graph No. 1 VARIATIONS AVAILABLE: 88A-240 Series (316 SS Ball & Stem) 88A-230 Series (Ni-Cu Ball & Stem) OPTIONS AVAILABLE: (SUFFIX) OPTION -01- Standard -14- Side Vented Ball (Uni-Directional) -21- UHMWPE Seats -24- Fire Safe (Graphite Packing and Seal) -35- PTFE Seats and Seals -38- PEEK Seats and Graphite Packing -49- Assembled Dry -59- SS External Trim -60- Grounded Ball and Stem -65- MPTFE Seats and Graphite Packing -67- Cleaned For Industrial Gases -69- Drilled and Tapped Purge Port with Plug Extended Bonnet SS Spiral Wound Gaskets w/ptfe Filler -76- Live Loaded 87A/88A Series (Lever) -77- Live Loaded (Gear & Actuator) -80- Multi-Seal (Super TFE) 87A/88A Series -MG- Gear Operator with Standard Handwheel -MH- Gear Operator with Standard Handwheel & -MJ- Gear Operator with Oversize Handwheel -MK- Gear Operator with Oversize Handwheel & -TC- With Test Certificate -TD- Tested to API Spec 6D -UL- UL & CSA Listed (w/markings) NUMBER SIZE A B C D E F G H I J K L M WT. 88A / A-20A / A-20C / D-25
4 88A-200 Series Carbon Steel ASME Class 150 Flanged Full Port Ball Valve - 8 through 12 MATERIALS OF CONSTRUCTION Description Material 2. Retainer ASTM A216 WCB 3. Ball ASTM A108 Type 1215 or A216 WCB Chrome Plated 8. Gland Screws ASTM A193 B7 9. Gland Plate 316 SS 10. Stem Bearing RPTFE 11. Body Seal RPTFE 12. Body Joint Stud ASTM A193 Grade B7 13. Body Joint Nut ASTM A194 Grade 2H For Pressure/Temperature Ratings, Refer to Page M-7, Graph No. 1 VARIATIONS AVAILABLE: 88A-230 Series (Ni-Cu Ball & Stem) 88A-240 Series (316 SS Ball & Stem) OPTIONS AVAILABLE: (SUFFIX) OPTION -01- Standard -14- Side Vented Ball (Uni-Directional) -21- UHMWPE Seats -24- Fire Safe (Graphite Packing and Seal) -35- PTFE Seats and Seals -49- Assembled Dry -65- MPTFE Seats and Graphite Packing -67- Cleaned for Industrial Gas - CS Valves -69- Drilled and Tapped Purge Ports with Plugs -70- Extended Bonnet (8 Only) -77- Live Loaded 87A/88A Series (Gear & Actuator) -80- Multi-Seal (Super TFE) 87A/88A Series -MG- Gear Operator with Standard Handwheel -MH- Gear Operator with Standard Handwheel & -MJ- Gear Operator with Oversize Handwheel -MK- Gear Operator with Oversize Handwheel & -TC- With Test Certificate -TD- Tested to API Spec 6D -UL- UL & CSA Listed (w/markings) NUMBER SIZE A B C D E F G 88A-20E A-20G A-20H D-26
5 ASME Flanged Ball Valves 87A, 87B, 88A, 88B, & 88L Series Features and Benefits Except where specifically noted all valves within this family of products complies with the requirements of this listed standard. ASME B Pipe Flanges and Flanged Fittings ASME B Face to Face Dimensions of Valves ASME B Valves - Flanged, Threaded, and Welding End ASME B Manual Operated Metallic Gas Valves for Use in Gas Piping Systems up to 125 psig ASME B Large Metallic Valves for Gas Distribution (Manually Operated NPS 2-1/2 to 12, 125 psig) ASME B ASME B ASME B API API MSS SP-25 - MSS SP-61 - MSS SP-72 - UL Power Piping Chemical Plant and Petroleum Refinery Piping Gas Transmission and Distribution Piping Systems Fire Test - Soft Seated Quarter Turn Valves (-24 Option Required) Ball Valves - Flanged, Threaded, and Welding End Standard Marking System for Valves Pressure Testing of Steel Valves Ball Valves with Flanged or Buttweld Ends Valves for Anhydrous Ammonia and LP-Gas (Other than Safety Relief) Except where specifically noted all valves within this family of products include all listed features as standard. Two Position (Valves 6 FP, 8 SP and smaller) CHV Style Adjustable Stem Seals Four Point ISO 5211 Mounting Pad Bolt Pattern Slot Vented Ball for Thermal Expansion Rated 150 psig Saturated Steam Anti-static Grounded Ball and Stem Blow-out Proof Stem Design Cast Boss for Bleed / Drain Port Vacuum Service to 29 inches of Hg NACE MR Compliance on all 87A/87B PRODUCT APPROVALS CSA (Reference: ASME B16.33 & B16.38) UL (Reference: Control Number 195H) UL (YSDT) LP-Gas Shut-Off Valves UL (MHKZ) Manual Valves UL (YRBX) Flammable Liquid Shut-Off Valves UL (YRPV) Gas Shut-Off Valves UL (YQNZ) Compressed Gas Shut-Off Valves UL (YQAR) Anhydrous Ammonia Shut-Off Valves D-A
6 FLOW DATA For Apollo Ball Valves The listed Cv factors are derived from actual flow testing, in the Apollo Ball Valve Division, Conbraco Industries, Inc., Pageland, South Carolina. These tests were completed using standard off the shelf valves with no special preparation and utilizing standard schedule 40 pipe. It should be understood that these factors are for the valve only and also include the connection configuration. The flow testing is done utilizing water as a fluid media and is a direct statement of the gallons of water flowed per minute with a 1 psig pressure differential across the valve/connection unit. Line pressure is not a factor. Because the Cv is a factor, the formula can be used to estimate flow of most media for valve sizing. Flow of Liquid Q = Cv ΔP SpGr or ΔP = (Q) 2 (SpGr) (Cv) 2 Where: Q = flow in US gpm ΔP = pressure drop (psig) SpGr =specific gravity at flowing temperature Cv = valve constant Flow of Gas Q = 1360 Cv (ΔP) (P1) (SpGr) (T) or ΔP = 5.4 x 10-7 (SpGr) (T) (Q) 2 (Cv) 2 (P2) Where: Q = flow in SCFH ΔP = pressure drop (psig) SpGr =specific gravity (based on air = 1.0) P2 = outlet pressure psia (psig ) T = (temp. F + 460) Cv = valve constant Cv FACTORS FOR APOLLO VALVES Valve Size (inches) 1/4 3/8 1/2 3/ /4 1-1/ / Ball Valves /200 Series /200 Series W Series B-140 Series /200 Series /400 Series Series Series AR Series /200 Series /900 Series A-100 Series /400 Series Series Series AR Series F-100 Series Series /400 Series Series K-100 Series AR Series C-100/200 Series D-140 Series D-640 Series G-UL Series W Series X Series /200 Series M-1
7 Cv FACTORS FOR APOLLO VALVES Valve Size (inches) 1/4 3/8 1/2 3/ /4 1-1/ / Ball Valves 79 Series /81 Series /200 Series A/83B Series R-100/200 Series A/86B Series R-100/200 Series A-100 Series A-200 Series A-700 Series A-900 Series B-100 Series A-100 Series A-200 Series A-700 Series A-900 Series B-100 Series Series A-100 Series Series Series Series A-100/200 Series /200 Series A-300/400 Series Series Series Series M-2
8 M-7
87A-200 Series. Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1
87A-200 Series Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - MATERIALS OF CONSTRUCTION Description (1/2 & 3/4 Valves) Material 2. Retainer ASTM A276 Type 316 3. Ball ASTM A276 Type 316
87A-100 Series. Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve -
87A-100 Series Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 MATERIALS OF CONSTRUCTION Description Material 1. Body ASTM A351 CF8M 2. Retainer ASTM A276 Type 316 3. Ball
Carbon Steel ASME Class 150 Flanged Std. Port Ball Valve through 2
88A-100 SERIES Carbon Steel ASME Class 150 Flanged Std. Port Ball Valve - 1.5 through 2 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART MATERIAL 1 Body ASTM
Duplex Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1
87J-200 SERIES Duplex Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART (1/2 & 3/4
special male. Bronze 3-Piece Full Port Ball Valve With Male Brazed Extensions
82-200 special male Bronze 3-Piece Full Port Ball Valve With Male Brazed Extensions Solder end, 600 CWP (psig), Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Designed for soft
KTM METALTITE BALL VALVES FLOATING AND TRUNNION TYPE
Metaltite metal seated ball valves have excellent sealing characteristics suitable for various fluids services with a wide range of operating temperatures FEATURES GENERAL APPLICATION Clean fluids, dirty
NELES TRUNNION MOUNTED, BALL VALVES, FULL BORE, SERIES X
NELES TRUNNION MOUNTED, BALL VALVES, FULL BORE, SERIES X Metso's Neles series X is a trunnion modular ball valve. Neles X series valves incorporate robust stem to ball connection. This assures valves are
Worcester Controls E51/52. Enviro-Safe High Integrity Flanged Ball Valves
Worcester Controls E1/2 Enviro-Safe High Integrity Flanged Ball Valves General Description With environmental protection and control established as a major issue for the future, Flowserve Worcester Controls
Cast Steel Bolted Bonnet Stop Check Valves Sizes: 2 thru 14 Pressure Class: 150 thru 1500
ast Steel olted onnet Stop heck Valves Sizes: 2 thru 14 Pressure lass: 150 thru 1500 Manufactured by Newmans 45 Newco ast arbon Steel olted onnet Valves Typical Newco ast Steel olted onnet Stop heck Valve
D-1 FIRE PROTECTION PRODUCTS TAPPING VALVE. MUELLER Tapping Valves. MUELLER Tapping Sleeves and Crosses. MUELLER Stainless Steel Tapping Sleeves
TAPPING VALVE MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including cast iron, ductile iron, A-C, and cast iron O.D. PVC--Also outlet sealed
D1 Series Multi-hole Cage Guided Control Valves
D1 Series Multi-hole Cage Guided Control Valves Model D1M Overview Model D1M globe control valves are with bolted bonnet and multi-hole cage guided trims. The design facilitates easy access to internal
Fisher EZ Sliding-Stem Control Valve
EZ Valve Product Bulletin 51.1:EZ Fisher EZ Sliding-Stem Control Valve Fisher EZ valves (figure 1) are used for throttling or on-off control of a wide variety of liquids and gases. The single-port, globe-style
Baumann 24000F Wafer Body Control Valve
24000F Valve Product Bulletin Baumann 24000F Wafer Body Control Valve The Baumann unique 24000F wafer style control valve mates with ASME and EN line flange connections and is designed to control a wide
UL / FM D-1 FIRE PROTECTION PRODUCTS TAPPING VALVE. MUELLER Tapping Sleeves and Crosses. MUELLER Tapping Valves
UL / FM TAPPING VALVE SECTION Rev. 2-15 MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including cast iron, ductile iron, A-C, and cast iron O.D.
Available End Connections & Size Range
ECCENTRIC PLUG VALVES Size Range 3"-24" Water Working Hydrostatic Size Range Pressure psi Test psi 3"-12" 175 350 14"-24" 150 300 Available End Connections & Size Range Figure No. Flanged 3"-24" F-5412
12.1 MUELLER TAPPING MATERIALS AND SPECIALTY VALVES. MUELLER Tapping Sleeves and Crosses. MUELLER Tapping Valves. MUELLER Stainless Steel Tapping
MUELLER TAPPING MATERIALS AND SPECIALTY VALVES 12.1 Shaded area indicates change Rev. 7-16 MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including
Direct contact and metal-to-metal seating make the T-pattern globe stop valve ideal for most shut-off applications.
Direct contact and metal-to-metal seating make the T-pattern globe stop valve ideal for most shut-off applications. Features Heavy integral Stellite hardfacing on both body and disc seating surfaces. Conical
PRESSURE REGULATORS. GAS LOW PRESSURE PRESSURE REDUCING STEEL.5 oz - 20 psig OPER. PRES.
1527 (2.5 lbs. Std.) Spring 3061 (5 lbs. Opt.) 4379 (20 lbs. Opt.) Stem 2913 * Gasket 1216 Diaphragm Plate 1208 * Diaphragm 1212 Screw 236, 10 Req d. Nipple 648 Gauge 4080 Tee 219 * Diaphragm 110 * Seat
Made in USA TRUNNION MOUNTED BALL VALVE INSTALLATION, MAINTENANCE, & REPAIR MANUAL
Made in USA TRUNNION MOUNTED BALL VALVE INSTALLATION, MAINTENANCE, & REPAIR MANUAL Corporation 3245 S. Hattie Oklahoma City, Oklahoma 73129 Telephone: (405) 677-3321 Fax: (405) 677-3917 Email:Balon@balon.com
Fisher A11 High-Performance Butterfly Valve, NPS 30-72
A11 Valve Product Bulletin Fisher A11 igh-performance Butterfly Valve, NPS 30-72 The Fisher A11 igh-performance Butterfly Valve maintains tight shutoff, and can be specified for a wide range of pressure
1/2 2-1/2 (DN 15 65) STANDARD PORT AND 1/2 2 (DN 15 50) FULL PORT SERIES 4000 BALL VALVES Threaded End Socket Weld Butt Weld
1/ -1/ (DN 1 ) STANDARD PORT AND 1/ (DN 1 ) FULL PORT SERIES 000 BALL VALVES Threaded End Socket Weld Butt Weld The JAMESBURY Series 000 ball valves offer the three most desirable attributes of high-quality
ISO INTERNATIONAL STANDARD. Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries
INTERNATIONAL STANDARD ISO 10434 Second edition 2004-07-15 Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries Robinets-vannes en acier à chapeau boulonné pour les industries
BULLETIN MARCH DeZURIK VPB V-PORT BALL VALVES TECHNICAL SPECIFICATIONS
BULLETIN.00-2 MRCH 20 ezurik VPB V-PORT BLL VLVES TECHNICL SPECIFICTIONS 2 20 ezurik, Inc. Materials of Construction Flanged Construction 1 20" (25 500mm) Class 0 1 (25 300mm) Class 300 etailed (Enlarged)
We Offer Both Cast Ball Valves & Forged Ball Valves.
11 GENEL SCREWED END BALL VALVES / FORGED BALL VALVES V-155 THREE PIECES BALL VALVES V-255 Full port : 1/4 2-1/2 (DN8-DN65) : 3/8 2-1/2 (DN10-DN65), Anti-static design ASTM A351 Gr.CF8M (1.4408) Full port
McCANNA Ball Valves for Purified Terephthalic Acid Services
flowserve.com McCANNA Ball Valves for Purified Terephthalic Acid Services Experience In Motion 1 McCANNASEAL Valves Meet the Challenges of Purified Terephthalic Acid (PTA) Processes With its vast experience
8mm - 50mm (1/4-2 ) api 602 bs asme b16.34 mss sp 84
L&T FORGED STEEL GATE, GLOE & CHECK VALVES ASME 150-2500 8mm - 50mm (1/4-2 ) api 602 bs 5352 S 6364 asme b16.34 mss sp 84 Introduction L&T Forged Steel Gate, Globe and Check Valves have established themselves
brands you trust. Tufline Lined Ball Valves
brands you trust. Tufline Lined Ball Valves Materials Of Construction Part 911 &944 911XP & 944XP Valves Only Ball PFA Lined Steel or Ductile Iron PFA Lined Steel or Ductile Iron Body & Tail PFA
Worcester 5 Series. BS 5351 Approved Flanged Ball Valves
Worcester 5 Series S 5351 pproved Flanged all Valves Flowserve Worcester is proud to announce the introduction of its new 519/529 range of ball valves which replaces the DN 15 - sizes of the proven Series
AVK (WWE) BUTTERFLY VALVE DN 50 to DN 2000 (2" to 80") 75 (EVFS)
AVK (WWE) BUTTERFLY VALVE DN 50 to DN 2000 (2" to 80") 75 (EVFS) Double Flanged type Design code EN593 Flange connection to EN 1092 PN 6, 10, 16 DESIGN Body Double Flanged type End Connection EN 1092 PN
Cryogenic Metal Seated Butterfly Valves
Cryogenic Metal Seated Butterfly Valves The Key to Cryogenic Valve Solutions VELAN S.A.S VELAN Inc Group VELAN inc is one of the world's leading independent manufacturer of steel gate, globe, check, butterfly
CATALOG C-FPV-0509 AHEAD OF THE FLOW. Fire Protection Valves
CATALOG C-FPV-0509 AHEAD OF THE FLOW Fire Protection Valves Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products
1301 Series High-Pressure Regulators
1301 Series High-Pressure Regulators Bulletin 71.1:1301 December 2013 P10 Figure 1. Type 1301F Regulator Features Durable Stainless Steel Diaphragm For high-outlet pressure applications. Spare Valve Disk
Standards are finally approved by the Standards High Council of Iranian Ministry of Petroleum.
FOREWORD This Standard is intended to be used within and for Iranian Ministry of Petroleum (N.I.O.C, N.I.G.C, N.P.C., N.I.O.R.D.C. and other affiliate organizations and companies) and has been prepared
M-CLASS. Metal seated ball valves
M-CLASS Metal seated ball valves Lockable tee-handle, gearbox and actuated options Patented tripod mounting bracket with ISO 5211 option for simple and precise actuator mounting Oversized stem to prevent
CROSBY H-SERIES DIRECT SPRING SAFETY VALVES
DIRECT SPRING SAFETY VALVES Direct spring safety valves that provide comprehensive overpressure protection for ASME Boiler and Pressure Vessel Code Section I, and Section VIII steam safety applications
Kerotest/Marsh Needle Valves Series N
Series N Kerotest/Marsh N Series Needle Valves are used in processing plants, oil and gas production, hydraulic and pneumatic equipment, testing labs anywhere the flow of fluid must be carefully regulated.
ball valves 7 Series Fire Safe 2-way, 3-piece Bolted Ball Valves
7 Series Fire Safe 2-way, 3-piece Bolted Ball Valves HOKE s 7 Series Fire Safe Valves meet demanding application requirements in the production environment of chemical and petrochemical processing facilities.
brands you trust. CRANE Iron Valves Copyright 2013 CRANE ChemPharma & Energy
brands you trust. CRANE Iron Valves Copyright 0 CRANE ChemPharma & Energy Key Features & Applications Key Features & Benefits Fully rated to ASME and MSS-SP Standards Full Pressure Class Offering: Class
Section 20. Globe Valves
Section 20 A globe valve is a type of valve used for regulating flow in a pipeline, consisting of a movable disk-type element and a stationary ring seat in a generally spherical body. Globe valves are
Metal Seated Ball Valves
VALVES AND PIPELINE SUPPLIES Metal Seated Ball Valves FAST TRACK SUPPLY CLASS V & VI SHUT OFF The production of a zero maintenance, high performance metal seated valve has been the goal of many engineers.
Corrosion Resistant Firesafe Ball Valves For Sour Oilfield Environments
Corrosion Resistant Firesafe Ball Valves For Sour Oilfield Environments Unibody & Two-Piece Threaded Floating Ball Valves Series 5312 Unibody Ball Valve 2000 WOG Sizes 1/4"- 2" Series 5322 Two-Piece Ball
HIGH SEAL ULF Live Loaded Packing System
Instruction Manual HIGH-SEAL Live-Loaded Packing HIGH SEAL ULF Live Loaded Packing System Contents Introduction... 1 Scope of Manual... 1 Description... 2 Spring Selection... 3 Installation... 3 Parts
4 1 /2 MARK 73-5 AMERICAN FLOW CONTROL. It s What We Know. AMERICAN-DARLING FIRE HYDRANT AMERICAN-DARLING 4 1 /2 MARK 73-5 FIRE HYDRANT
AMERICAN-DARLING FIRE HYDRANT AMERICAN-DARLING FIRE HYDRANT AMERICAN FLOW CONTROL It s What We Know. CONSTRUCTION AMERICAN-DARLING FIRE HYDRANT OPERATING NUT Cast one-piece bronze operating nut. Design
ASME B31.3 Process Piping. 19. What s Different in B31.1
ASME B31.3 Process Piping Charles Becht IV, PhD, PE Don Frikken, PE Instructors BECHT ENGINEERING COMPANY, INC. What s Different in B31.1-1 19. What s Different in B31.1 Scope Organization of the Code
Isolation Gaskets 101
Isolation Gaskets 101 Discussion Outline Isolation Gasket Basics Product Offering Gasket Terms & Definitions Materials & Applications Standards & Codes Isolation Gasket Basics ISOLATION GASKET Isolation
Fisher Cavitrol III One, Two, and Three Stage Trims
Cavitrol III Trims D0096X0 Product Bulletin 80.:00 September 07 Fisher Cavitrol III One, Two, and Three Stage Trims Cavitrol III trims (figures,, and ) are used for cavitating liquid applications in various
GD Valves Rubber Lined - Centric EVS. Wouter Witzel - EVS /
DESIGN Body Flangeless wafer type End Connection EN 1092 PN 6, 10 and 16 ASME B16.5 cl. 150 / B16.47 cl. 150 MSS SP 44 cl. 150 AWWA C207 cl. B, D and E BS 10 table D and E JIS 5K/10K/16K Face to Face EN558-1/2
A COMPLETE SELECTION OF TOP ENTRY BALL VALVES FOR A WIDE RANGE OF SEVERE SERVICES. top entry ball valves
A COMPLETE SELECTION OF TOP ENTRY BALL VALVES FOR A WIDE RANGE OF SEVERE SERVICES top entry ball valves Top Entry Top Entry Valve Features........................ 2 Special Applications............................
brands you trust. STOCKHAM - Iron Valves Copyright 2013 CRANE ChemPharma & Energy
brands you trust. STOCKHAM - Iron Valves Copyright 0 CRANE ChemPharma & Energy Key Features & Applications Key Features & enefits Fully rated to ASME and MSS-SP Standards Full Pressure Class Offering:
Valbart Through Conduit Slab Gate Valve (TCSGV)
Valbart Through Conduit Slab Gate Valve (TCSGV) The Oil and Gas Industry s Choice for Liquid and Gas Applications Experience In Motion Flowserve Solutions to Keep You Flowing Flowserve is one of the world
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15761 First edition 2002-12-15 Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries Robinets-vannes, robinets à soupape
SECTION TAPPING SLEEVES AND VALVES
SECTION 33 12 16.17 TAPPING SLEEVES AND VALVES PART 1: GENERAL 1.01 SCOPE Furnish, install and test all tapping sleeves, tapping valves, and tapping saddles as shown on the Drawings. 1.02 RELATED WORK
KLINGER Ballostar KHE: This ball valve offers more
KLINGER Ballostar KHE Split body ball valve DN (1/2 ) 0 ( ) Edition 10 Tel. + (0)2252 600-0 Fax + (0)2252 600- Web: www.klinger.kfc.at KLINGER Ballostar KHE: This ball valve offers more The design of
CONA -Universal ANSI / CONA -Connector ANSI
CONA -Universal ANSI for quick assembly/disassembly on CONA -Connector or foreign system connectors CONA -Universal ANSI / CONA -Connector ANSI CONA B-Universal ANSI Bimetallic steam trap ANSI CONA M-Universal
94130 Pressure Relief Vent (Open or Closed Vent Option) Features
94130 (Open or Closed Vent Option) The Shand & Jurs 94130 is designed to provide pressure relief with high efficiency, maximum flow capacity and minimum leakage. The easily serviceable configuration and
Wafer and Lug style resilient seated butterfly valves with cartridge seat design.
Wafer and Lug style resilient seated butterfly valves with cartridge seat design. FEATURES AND BENEFITS Suitable for high pressure and full vacuum service due to the use of a cartridge seat design. Triple
KEYSTONE SWING TYPE WAFER CHECK VALVE FIGURE 86
High capacity, spring loaded swing type wafer check valve FEATURES Lightweight, wafer type check valve with face-to-face dimensions according ISO 5752, table 5 long High flow capacity featuring a special
Fisher ENVIRO-SEAL and HIGH-SEAL Packing Systems for Sliding-Stem Valves (Live-Loaded)
Sliding-Stem Live-Loaded Packing Product Bulletin Fisher ENVIRO-SEAL and HIGH-SEAL Packing Systems for Sliding-Stem Valves (Live-Loaded) Fisher ENVIRO-SEAL and HIGH-SEAL live-loaded packing systems offer
- Tensile strength of 50,000 psi per ASTM D-638 or 345 Mpa - Notched Izod impact strength of 35 ft-lb/in per ASTM D-256 or 1868 J/M are achieved.
PureFlex is a world leading manufacturer of high performance Fluoropolymer and Composite products and technologies. We specialize in the manufacturing of fluid handling and sealing products specifically
Rosemount 405 Compact Orifice Primary Element
Rosemount 405 Compact Orifice Primary Element SPECIFICATIONS Performance Discharge Coefficient Uncertainty TABLE 20. 405 Compact Orifice Primary Element Type 405C (Conditioning Compact) 405P (1)(2) (Standard
Regulating valves REG 6-65, REG-SS 15-40
MAKING MODERN LIVING POSSIBLE Technical brochure Regulating valves REG 6-65, REG-SS 15-40 REG are angle-way and straight-way regulating valves, which act as normal stop valves in closed position. The valves
NELES TOP ENTRY, ROTARY CONTROL VALVE, SERIES TOP 5
NELES TOP ENTRY, ROTRY CONTROL VLVE, SERIES TOP 5 Metso's Neles T5 series top entry rotary ball valves are designed to meet the requirements of chemical, petro-chemical and refining industries with improved
ON-OFF free flow valves Series MVMFL/BW
Series MVMFL/BW Technical data Size () Rating Connections Plug characteristic Action Temperature 15-25 PN 16 Butt weld (BW) Parabolic linear Manual handwheel from -30 to +150 C Description Manual micro-valve
Compact CATALOG. Performance. Safety Relief Valves Series 437 Series 459. The-Safety-Valve.com
Compact Performance Safety Relief Valves Series 437 Series 459 CATALOG The-Safety-Valve.com Valve Finder Product group High operating to set pressure ratio, high backpressure or low total height? Yes High
PARTS & ACCESSORIES: EATON DUPLEX BASKET STRAINERS FEATURES OPTIONS MODEL 53BTX DUPLEX (3/4 TO 4 ) MODEL 50 DUPLEX (5, 6, 8 )
PARTS & ACCESSORIES: MODEL BTX & 0 Section 64 Page 64. Issue E FEATURES MODEL BTX DUPLEX (/4 TO 4 ) Dynamic sealing design for long life Easy-to-operate lever handle no gear box required Unique seat and
289 Series Spring-Loaded Relief Valves
8/9 289 Series Spring-Loaded Relief Valves W187-2 W187-2 W21-1 W29-2 1-INCH TYPE 289H AND 289HH 2-INCH TYPE 289H Figure 1. Type 289H and 289HH Relief Valves The 289 Series relief valve is a throttling
Pressure Regulators K Series
Pressure Regulators K Series 1 www.swagelok.com Pressure Regulators K Series Pressure-reducing models Back-pressure models Gas cylinder changeover model Vaporizing models 2 Pressure Regulators and Filters
289 Series Spring-Loaded Relief Valves
89 Series Spring-Loaded Relief Valves Bulletin 71.4:89 April 1 W187_1 W1871 type 89L 1 NPT TYPEs 89H and 89HH W187 NPT TYPE 89H Figure 1. Types 89H, 89L, and 89U Relief Valves W187_ types 89U and 89A Introduction
MECESA IS A DESIGNER AND MANUFACTURER COMPANY FROM BARCELONA SPECIALIZED IN FITTINGS AND COMPONENTS FOR INDUSTRIAL INSTRUMENTATION LINES BORN IN 1952.
IS A DESIGNER AND MANUFACTURER COMPANY FROM BARCELONA SPECIALIZED IN FITTINGS AND COMPONENTS FOR INDUSTRIAL INSTRUMENTATION LINES BORN IN 1952. DESIGNS AND MANUFACTURES FOR A WIDE VARIETY OF INDUSTRIAL
Penberthy models RH and TH direct reading liquid level gages
High pressure flat glass gages in reflex and transparent styles Features General application RH High pressure gages are designed to be used in direct reading liquid level measurement for high pressure
GWC Italia. Proven technology for individual valve solutions worldwide WGV-1002
GWC Italia Proven technology for individual valve solutions worldwide api 6a gate valves WGV-1002 GWC ITALIA Proven technology for individual valve solutions worldwide GWC Italia Worldwide Network italy
Smart Solutions. Powerful Products. PBV. Cast Oilpatch Floating Ball Valves
Smart Solutions. Powerful Products. PBV Cast Oilpatch Floating Ball Valves Contents PBV Cast Oilpatch Floating Ball Valves Series PA / PAH Standard Features & Dimensional Data... 2 Parts, Materials & Engineering
A. Pipe, pipe fittings, valves, and connections for piping systems. 1. Sanitary sewer. 2. Domestic water. 3. Storm water. 4. Gas.
SECTION 221005 - PLUMBING PIPING PART 1 GENERAL 1.1 SECTION INCLUDES A. Pipe, pipe fittings, valves, and connections for piping systems. 1. Sanitary sewer. 2. Domestic water. 3. Storm water. 4. Gas. 1.2
vapor control systems Quality, Dependability, Service. Reputation Built on Valve Concepts, Inc. com A Cashco, Inc.
vapor control A Cashco, Inc. Company systems Reputation Built on Quality, Dependability, Service. Get Consistent Quality By involving every employee in our ISO 9001:2000 Quality Assurance Program, you
MODEL 3200 / 3201 CONTENTS. Installation, Operation, and Maintenance Instructions 1.0 GENERAL 2.0 INSTALLATION 3.0 OPERATION 4.
Installation, Operation, and Maintenance Instructions MODEL 3200 / 3201 March 2002 CONTENTS 1.0 GENERAL 1.1 Model Number ----------------------------------------------------------------------------------------------
Packing for Sliding-Stem Valves
August 1999 Bulletin 59.1:060 Packing for Sliding-Stem Valves This bulletin will guide you in selecting standard Fisher Controls valve stem packing materials and packing box arrangements. Packing materials
Richter Bellows-sealed Globe Control Valves
Richter Bellows-sealed Globe Control Valves RSS NEW: Size DN 50/6 Corrosion-resistant PFA lining ISO/DIN and ANSI/ISA face-to-face Heavy-duty bellows Special designs for chlorine and high-purity media
TABLE OF CONTENTS STANDARDS IN THE VALVE AND PRESSURE RELIEF INDUSTRY 1 ABBREVIATIONS USED IN THE VALVE & PRESSURE RELIEF INDUSTRY 2
TABLE OF CONTENTS STANDARDS IN THE VALVE AND PRESSURE RELIEF INDUSTRY 1 ABBREVIATIONS USED IN THE VALVE & PRESSURE RELIEF INDUSTRY 2 DEFINITIONS FOR THE PRESSURE RELIEF INDUSTRY 3 PRESSURE RELIEF DEVICE
Page 01 GLOBE CONTROL VALVE. Double seated globe valve, top and bottom guided. Single seated globe valve, top guided. Series GD.
Page 01 GLOBE CONTROL VALVE GU Single seated globe valve, top guided GD Double seated globe valve, top and bottom guided Single seated, top guided : 1/2-6 Rating : ANSI Class 150# - 4500# Connections :
VALVE PRODUCT OVERVIEW
WATER MANAGEMENT VALVE PRODUCT OVERVIEW WATER MANAGEMENT Double Eccentric BFV DEX Main Specification Double Eccentric BFV DEX Model Body Disc Shaft Retaining ring Internal bolts External bolts Bearing
Solution Partner. Leak - Proof Flow & Control. Needle Valves. W e. s u p p o r t. t h e. i n n o v a t i o n s. o f.
W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s Leak Proof low & Control The Best Partner for Value Creation olution Partner Index Needle Valves NV ERIE NV50 eries 4~7 BNV60 eries
A Division of Bray International, Inc. The Ultimate Critical Service TRIPLE OFFSET valve
A Division of Bray International, Inc. The Ultimate Critical Service TRIPLE OFFSET valve INTERNATIONAL, Inc. At Bray, our business is helping our customers with their flow control requirements. Our modular
NAVSEA STANDARD ITEM. 2.1 S9086-RJ-STM-010/CH-504, Pressure, Temperature and Other Mechanical and Electromechanical Measuring Instruments
NAVSEA STANDARD ITEM ITEM NO: 009-52 DATE: 29 JUL 2011 CATEGORY: II 1. SCOPE: 1.1 Title: Relief Valve; repair 2. REFERENCES: 2.1 S9086-RJ-STM-010/CH-504, Pressure, Temperature and Other Mechanical and
SWI BALL VALVES. High Integrity Top Entry Ball Valves. REQUEST A QUOTE SCHEDULE SERVICES
SWI BALL VALVES Ball Valves REQUEST A QUOTE sales@dkamans.com SCHEDULE SERVICES 562-529-8400 WWW.DKAMANS.COM We Manufacture Critical S ervice Valves For The Worlds Industries 1 2 TOP ENTRY TRUNNION MOUNTED
INSTRUCTIONS FOR THE ASSEMBLY AND INSTALLATION OF THE VORTOX LIQUID SAMPLER
INSTRUCTIONS FOR THE ASSEMBLY AND INSTALLATION OF THE VORTOX LIQUID SAMPLER I. SAMPLER SUSPENDED BY CABLE The Vortox Liquid Sampler is a precision instrument manufactured of stainless steel, easy to install,
ball valves Ultramite 70 Series Fixed End 2- and 3-way Ball Valves
Fixed End 2- and 3-way Ball Valves Ultramite 70 Series valves are designed to guard against accidental disassembly. The tamper-proof fixed end fittings are welded in place, with the exception of the 7065
C. Up to Two and One-half (2-1/2) inches: Full port, 2-piece, bronze body ball valves with teflon seat conforming to MSS SP-110.
SECTION 220000 PLUMBING SYSTEMS 1.0 Valves A. ASME compliance: 1. ASME B1.20.1 2. ASME B16.1 3. ASME B16.10 4. ASME B16.34 5. ASME B16.18 6. ASME B31.9 B. All branch mains shall be provided with shutoff
Copper and Copper Alloy Tube, Pipe and Fittings COPPER and COPPER ALLOY TUBE and PIPE Seamless Copper Pipe: Copper pipe is almost pure copper manufactured to the requirements of ASTM B 42 - Standard Specification
Mueller Gas Products. Mueller H17650 H17656 No Blo Service Stop Tee Weld x Weld 250 PSI
Mueller Gas Products Distributed by: Mountain States Pipe and Supply Colorado Springs, Colorado 80903 1 800 777 7173 Mueller H17650 H17656 No Blo Service Stop Tee Weld x Weld 250 PSI MUELLER NO-BLO FORGED
SECTION 18. AMERICAN General Index
SECTION 18 AMERICAN General Index General Index A Abbreviations Organizations...1-1 Standard, American...17-23 Abrasion Resistant Pipe...12-12 Accessories (See Joint Materials) American Flow Control Valves
APCO CDD-9000T DOUBLE DOOR CHECK VALVE TECHNICAL SPECIFICATIONS
BULLETIN 9000.00-2 SEPTEMBER 2015 APCO CDD-9000T DOUBLE DOOR CHECK VALVE TECHNICAL SPECIFICATIONS Materials of Construction DUCTILE IRON BODY Item Description Material A1 Body Ductile Iron, ASTM A536 A2
1. Hangers and supports for electrical equipment and systems. 2. Construction requirements for concrete bases.
SECTION 260529 - HANGERS AND SUPPORTS PART 1 - GENERAL 1.1 SUMMARY A. Section includes: 1. Hangers and supports for electrical equipment and systems. 2. Construction requirements for concrete bases. 1.2
Crude Oil and Refined Products Processing
Crude Oil and Refined Products Processing High Performance Ball Valves for Severe Service Applications Experience in Motion Application Know-How For more than 60 years Argus has delivered high performance
289 Series Spring-Loaded Relief Valves
February 1 89 Series Spring-Loaded Relief Valves W187_1 W1871 TYPE 89L 1 NPT TYPES 89H AND 89HH W187 NPT TYPE 89H W187_ TYPES 89U AND 89A Figure 1. Types 89H, 89L, and 89U Relief Valves Introduction The
PUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps...
PUMPS FOR INDUSTRY CONTENTS: The Vertical Pump Specialists Introduction & User List Product Overview Vertical Process Pumps... Series 600 Vertical Sewage Pumps... Series 700 Vertical Sump Pumps... Vertical
C. ASSE 1013 Performance Requirements for Reduced Pressure Principle Backflow Preventers.
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
Weir Valve Selections
Unlined Metal Excellent Cvs Complete Selection of End Connections ASTM Materials Include: Cast Iron ASTM A-126 Class B Ductile Iron ASTM A-395 Grade 60-40-18 Cast Steel ASTM A-216 Grade WCB 316 Stainless
ARRANGEMENT AND WORKING OF MULTIPORT FLOW SELECTOR VALVE IN PRODUCTION MANIFOLD:
GENERAL DESCRIPTION Crude oil well test manifold to be provide as Multiport Flow Selector (MPFS) technology. It provides a cost effective method for selecting and diverting well fluids from an individual
MODELS PA1/PL1 BIO-SANITARY
TECHNICAL BULLETIN 5-17 ISO Registered Company MODELS PA1/PL1 BIO-SANITARY PRESSURE REDUCING REGULATORS The Models PA1 and PL1 are stainless steel pressure reducing regu la tors designed to handle small
SPECIFICATIONS FOR THE INSTALLATION OF REDUCED PRESSURE BACKFLOW PREVENTERS AND CONCRETE VAULTS FOR METERS 4 AND LARGER
SPECIFICATIONS FOR THE INSTALLATION OF REDUCED PRESSURE BACKFLOW PREVENTERS AND CONCRETE VAULTS FOR METERS 4 AND LARGER Updated January 2018 RP-2 Installation Specifications 1. In W.H.U.D s service area