Adhesive and Thermal Seals

Transcription

1 An extensive range for all applications Adhesive and Thermal Seals ADHESIVE SEALS FluidX offer a wide selection of adhesive seals suitable for use on most manual, automated or semi-automated adhesive sealing systems. Standard foil seals, which can be either peeled or pierced, ideal for low temperature storage. Transparent and foil seals for PCR. Economical transparent seal for temporary storage of aqueous samples. Optically clear seals that are perfect for QPCR and fluorescence, available with a non-sticky pressure-sensitive adhesive for ease of use. Gas permeable seals, impervious to fluids, which enhance cell growth. Silicone foil, available in peelable or piercable versions, that demonstrates excellent solvent resistance and is ideal for use with plates containing DMSO. Black PE foil for light sensitive applications. DMSO-resistant gold foil seal. All seals are available in a choice of sizes, pre-cut sheets or roll format.

2 ADHESIVE SEALS DESCRIPTION Adhesive PCR transparent seals Clear film with good solvent resistance. Peelable. Applications: PCR. Economy adhesive transparent seals Cat No Precut (117mm* x 80mm, 100 sheets) (90mm x 100m) roll for X-Seal Manual Adhesive Sealer (90mm x 100m) roll for Abgene Seal-It Precut Clear film with no solvent resistance. Temp range -20 to 120 o C. Not gas permeable. Peelable. Applications: Temporary storage of aqueous samples. Not recommended for PCR or low temperature storage. Adhesive PCR foil seals Temp range -20 to 150 o C. Not gas permeable. Peelable and pierceable. Applications: PCR Precut (122mm* x 80mm, 100 sheets) (90mm x 100m) roll for Abgene Seal-It100 Adhesive clear seals for QPCR and fluorescence Optically clear film with good solvent resistance. Temp range -80 to 110 o C. Not gas permeable. Peelable and pierceable. Applications: QPCR, fluorescence, crystallography and genotyping Precut (120mm* x 80mm, 100 sheets) (90mm x 100m) roll for X-Seal Manual Adhesive Sealer (500m x 115.5mm) for Velocity 11 Non-sticky pressure-sensitive adhesive. Gas permeable adhesive membrane Non-woven cream membrane. No solvent resistance. Temp range 10 to 120 o C. Gas permeable but impervious to fluids. Peelable. Applications: Enhances cell growth. Suitable for use in autoclave and similar equipment Precut (132mm* x 80mm, 50 sheets) (81mm x 100m) roll for X-Seal Manual Adhesive Sealer, with adapter Adhesive silicone foil, pierceable Foil with excellent solvent resistance. Pierceable. Applications: Ideal for sealing plates containing DMSO Precut (81mm x 150m) roll for X-Seal Manual Adhesive Sealer, with adapter Adhesive silicone foil, peelable Foil with excellent solvent resistance. Peelable. Applications: Ideal for sealing plates containing DMSO Precut (122mm* x 80mm, 100 sheets) (81mm x 150m) roll for X-Seal Manual Adhesive Sealer, with adapter Non-sticky pressure-sensitive adhesive. * size when adhesive strip removed Tel:+44 (0) info@fluidx.co.uk

3 ADHESIVE SEALS cont.. DESCRIPTION Adhesive polyoelfin film Clear film with good solvent resistance. Temp range -25 to 120 o C. Not gas permeable. Peelable. Applications: No contact between sample and adhesive. Use for imaging and protein crystallography applications. Cat No Precut (120mm* x 80mm, 100 sheets) (90mm x 100m) roll for X-Seal Manual Adhesive Sealer Non-sticky pressure-sensitive adhesive. Standard adhesive foil, pierceable Pierceable. Applications: Suitable for microplate storage at low temperatures, PCR. Standard adhesive foil, peelable Peelable. Applications: Suitable for microplate storage at low temperatures. PCR. Black PE foil Black foil with good solvent resistance. Temp range -40 to 80 o C. Not gas permeable. Peelable. Applications: Ideal for light-sensitive applications Precut (90mm x 100m) roll for X-Seal Manual Adhesive Sealer Precut (90mm x 100m) roll for X-Seal Manual Adhesive Sealer Precut (142mm* x 80mm, 50 sheets) Foam-backed seal for PCR Precut (50 sheets) Cream foam. No solvent resistance. Temp range -20 to 40 o C. Not gas permeable. Peelable. Applications: 3M seal for PCR. Gas permeable adhesive seal Precut (122mm* x 80mm, 50 sheets) Cream seal. No solvent resistance. Temp range 10 to 120 o C. Gas permeable. Peelable. Applications: Able to place temporary seal over top for transportation. Gas permeable polyolefin film, pre-pierced Clear film with good solvent resistance. Temp range -25 to 120 o C. Gas permeable. Peelable. Applications: Particularly suitable for imaging and protein crystallography applications. DMSO-resistant foil Gold seal with excellent solvent resistance. Temp range -85 to 120 o C. Not gas permeable. Peelable. Applications: Compound storage Precut (126mm* x 80mm, 50 sheets) (90mm x 150m) roll for X-Seal Manual Adhesive Sealer Precut (122mm* x 80mm, 100 sheets)

4 THERMAL SEALS FluidX offer a wide selection of thermal seals suitable for use on most manual, automated or semi-automated thermal sealing systems. EZ peel foil, resistant to DMSO, which is peelable direct from freezer. Ideal for low temperature storage. EZ pierce foil with good solvent resistance that can be pierced with tip. Suitable for PCR and compound storage. Crystal Clear peelable film, ideal for QPCR and fluorescence. Thermal bond heavy duty foil for long term sample storage. Suitable for use with DMSO and hazardous materials. DMSO-resistant peelable foil. All seals are available in a choice of sizes, pre-cut sheets or roll format. FluidX reserve the right to update and change product information without notice. FluidX Ltd

5 THERMAL SEALS DESCRIPTION EZ peel, peelable heat seal for polypropylene plates Foil. Resistant to DMSO at less than 4 o C Temp range -90 to 120 o C. Not gas permeable. Peelable direct from freezer. Cat No Precut (500m) roll for ALPS (25m) sample roll for ALPS (610m x 78mm) roll for ALPS300/ (25m) sample roll for ALPS300/3000 Applications: Low temperature compound storage, short-term room temperature storage. PCR. Seals can be re-applied. EZ pierce 20um, pierceable seal for polypropylene plates Pierceable with tip Precut (610m x 78mm) roll for ALPS300/ (25m) sample roll for ALPS300/ (500m x 115.5mm) roll for PlateLoc (25m) sample roll for PlateLoc Applications: Compound storage, sample shipping, PCR. Can re-seal over existing seal. A thinner version of Cat No Crystal clear peelable seal Clear film with moderate solvent resistance. Peelable Applications: Use with polypropylene plates, good optical clarity. Suitable for QPCR, fluorescence. EZ pierce seal for polypropylene plates Pierceable with tip. Peelable Precut (500m x 78mm) roll for ALPS300/ (25m) sample roll for ALPS300/ (500m x 115.5mm) roll for PlateLoc (25m) sample roll for PlateLoc Precut (610m x 78mm) roll for ALPS300/ (25m) sample roll for ALPS300/ (500m x 115.5mm) roll for PlateLoc (25m) sample roll for PlateLoc Applications: Compound storage, sample shipping, PCR. Suitable for use with DMSO. Can add a secondary seal for transportation. Crystal weld seal Clear film with good solvent resistance. Not peelable or pierceable Precut (610m x 78mm) roll for ALPS300/ (25m) sample roll for ALPS300/3000 Applications: Optically clear for visual inspection. Suitable for use with DMSO and hazardous materials.

6 THERMAL SEALS cont.. DESCRIPTION Thermal bond heavy duty foil Temp range -20 to 120 o C. Not gas permeable. Peelable Applications: A long term seal. Suitable for use with DMSO and hazardous materials. Cat No Precut (500m x 78mm) roll for ALPS300/ (25m) sample roll for ALPS300/ (500m x 115.5mm) roll for PlateLoc (25m) sample roll for PlateLoc Gas permeable heat seal Non-woven cream seal with no solvent resistance. Temp range 10 to 120 o C. Gas permeable. Peelable Precut Available for use on ALPS300/3000 Applications: Gas permeable membrane that provides a barrier to solid contaminants. Suitable for cell culture. Seals polystyrene and polypropylene plates. DMSO resistant peel seal Foil with excellent moderate solvent resistance. Peelable Applications: Compound storage with DMSO, low and room temperature. Clear seal for ABI3730 sequencer Clear thin film. Not gas permeable. Applications: PCR sequencing Precut (500m x 78mm) roll for ALPS300/ (25m) sample roll for ALPS300/ (500m x 115.5mm) roll for PlateLoc (25m) sample roll for PlateLoc Also available in REMP format (610m x 78mm) roll for ABI3730 sequencer (25m) sample roll for ABI3730 sequencer ABgene ALPS 3000 TM ABgene ALPS 300 TM V11 PlateLoc TM FluidX reserve the right to update and change product information without notice. FluidX Ltd

7 ADHESIVE SEALS OVERVIEW DESCRIPTION PRECUT ROLLS FURTHER DETAILS APPLICATIONS X-Seal Manual and Automated Adhesive Sealers X-Seal Automated Adhesive Sealer and Abgene fomat Appearance Solvent resistance Temperature range C Gas permeable Peelable/ Pierceable Adhesive PCR seals, transparent, peelable (117mm* x 80mm, 100 sheets) (90mm (90mm Clear film Good -80 to 120 No Peelable PCR Adhesive, transparent seal for PP and PS plates. (A less expensive version of ) Clear film None -20 to 120 No Peelable Temporary storage of aqueous samples. Not recommended for PCR or low temperature storage. Adhesive, transparent seal for PP and PS plates. (A less expensive version of ) (122mm* x 80mm,100 sheets) (90mm x200m) Foil Good -20 to 150 No Peelable and Pierceable PCR. Adhesive clear seals for QPCR and fluorescence applications (120mm* x 80mm, 100 sheets) (90mm Optically clear film Good -80 to 110 No Peelable and Pierceable Suitable for QPCR, fluorescence, crystallography and genotyping applications. Non-sticky, pressure-sensitive adhesive. Adhesive silicone foil, high solvent resistance, Pierceable with adapter (81mm x 150m) Foil Excellent -80 to 120 No Pierceable Ideal for sealing plates containing DMSO. A bestseller! Adhesive silicone foil, high solvent resistance, peelable (122mm* x 80mm,100 sheets) with adapter (81mm x 150m) Foil Excellent -80 to 120 No Peelable Ideal for sealing plates containing DMSO. Nonstick, pressuresensitive adhesive. A best-seller! Adhesive polyolefin film, peelable, solvent resistance (120mm* x 80mm, 100 sheets) (90mm Clear film Good -25 to 120 No Peelable No contact between sample and adhesive. Nonsticky, pressuresensitive adhesive. Particularly suitable for imaging and protein crystallography. Standard adhesive foil, Pierceable (90mm Foil Good -80 to 120 No Pierceable Standard Pierceable foil, suitable for microplate storage at low temperatures. PCR. Standard adhesive foil, peelable (90mm Foil Good -80 to 120 No Peelable Standard peeling foil, suitable for microplate storage at low temperatures. PCR. Black PE foil, light resistant, solvent resistant, peelable (142mm* x 80mm, 50 sheets) Black Good -40 to 60 No Peelable Ideal for light sensitive applications PQ foam-backed seal for PCRresistant, peelable (50 sheets) Cream foam None -20 to 40 No Peelable 3M seal for PCR. DMSO-resistant adhesive foil, peelable (122mm* x 80mm, 100 sheets) Gold Excellent -80 to 120 No Peelable Compound storage. Gas permeable adhesive membrane, impervious to fluids (132mm* x 80mm, 50 sheets) with adapter (81mm x 100m) Non-woven, cream None 10 to 120 Yes but impervious to fluids Peelable Gas permeable membrane for enhanced cell growth. Suitable for use in autoclave and similar equipment. Gas permeable adhesive seal (122mm* x 80mm, 50 sheets) Cream None 10 to 120 Yes Peelable Able to place a temporary seal over the top for transportation Gas permeable adhesive polyolefin film, pre-pierced for gas exchange (126mm* x 80mm, 50 sheets) (90mm vvv Clear film Good -25 to 120 Yes Peelable Particularly suitable for imaging and protein crystallography applications. Pre-pierced foil ensures good gas exchange.

8 THERMAL SEALS OVERVIEW DESCRIPTION PRECUT ROLLS FURTHER DETAILS APPLICATIONS X-Seal Manual Thermal Sealer X-Seal Automated Thermal Sealer and ALPS 300/3000 PlateLoc format Appearance Solvent resistance Temperature range C Gas permeable Peelable/ Pierceable EZ Peel, peelable heat seal for polypropylene plates (610m x 78mm), Foil Resistant to DMSO at < 4 C -90 to 120 No Peelable direct from freezer. Good barrier to aqueous solutions. Low temperature compound storage, short term room temperature compound storage, PCR. Seals can be re-applied. EZ Pierce 20um, pierceable seal for polypropylene plates (610m x 78mm), (500m x115.5mm), Foil Good -80 to 120 No Pierceable with tip Compound storage, sample shipping, PCR. Can reseal over existing seal. (Thinner version of ). EZ Pierce foil heat seal (610m x 78mm), (500m x115.5mm), Foil Good -80 to 120 No Can be pierced with tip. Peelable For pp plates. Compound storage, sample shipping, PCR. Suitable for use with DMSO. Can add a secondary seal over the top for transportation. Thermal bond, heavy duty foil (500m x 78mm), (500m x115.5mm), Foil Good -20 to 120 No Peelable A long term seal. Suitable for use with DMSO and hazardous materials Cristal clear seal, peelable seal. Good optical clarity (500m x 78mm), (500m x115.5mm), Clear film Moderate -80 to 120 No Peelable Use with polypropylene and polystyrene plates, Good optical clarity. Suitable for QPCR, fluorescence. Clear weld seal (610m x 78mm), Clear film Good -80 to 120 No No Optically clear for visual inspection. Suitable for use with DMSO and hazardous materials. Gas permeable heat seal Available Non-woven, cream None 10 to 120 Yes Peelable Gas permeable membrane that provides a barrier to solid contaminants. Suitable for cell culture. Seals polypropylene and polystyrene plates. DMSO resistant peel seal (500m x 78mm), (500m x 115mm), (sample roll, also available in REMP format) Foil Excellent -80 to 120 No Peelable Compound storage with DMSO, low and room temperature. Clear seal for ABI 3730 sequencer (610m x 78mm) for ABI3730 sequencer, Clear thin film No PCR sequencing. EZ Peel, peelable heat seal for polypropylene plates also available for use with ALPS 100 sealer. Cat No (500m roll), and