The finest architectural woodcarvings in the world

Size: px
Start display at page:

Download "The finest architectural woodcarvings in the world"

Transcription

1 The finest architectural woodcarvings in the world Avalon Blvd. Carson, CA oo o7 All Designs Enkeboll Designs Proudly Handcrafted in the U.S.A. Since 1956

2 A R C H E S K E Y S C R O W N S ARC-EL6 76"ID(86"OD) x 20"H 5"W x 2¹ ₄"Thick ARX-PL3 37"ID(43"OD) x 21³ ₈"H ARC-SL2 25"ID(35"OD) x 19³ ₄"H ARC-SL3 37"ID(47"OD) x 26¹ ₂"H ARC-SL4 49"ID(59"OD) x 33¹ ₄"H 3"W ARX-OL3 37"ID(43"OD) x 11¹ ₂"H 5"W ARC-PL2 25"ID(35"OD) x 17Z x"h ARC-PL3 37"ID(47"OD) x 23¹ ₂"H ARC-PL4 49"ID(59"OD) x 29¹ ₂"H ARC-PL5 61"ID(71"OD) x 35¹ ₂"H 3"W ARX-PL2 25"ID(31"OD) x 15¹ ₄"H Shown with KEY-SO3 5"W 3"W ARC-OL3 37"ID(47"OD) x 17¹ ₂"H MLD-LC5 MLD-LC3 3"W MLD-LC3 PLI-PB5 5¹ ₄"W x 1¹ ₂"D x 10¹ ₂"H PLI-PB3 3¹ ₄"W x 1¹ ₂"D x 8¹ ₂"H KEY-CB3 Top: 4¹ ₂"W x 2¹ ₈"D x 4³ ₄"H Sides: 4³ ₄"H (for 3" mldg.) Bottom: 2⁷ ₈"W x 1¹ ₈"D KEY-RB5 Top: 4Z x"w x 2Z,"D x 4C v"h Sides: 4Z v" (for 3" mldg.) Bottom: 2⁷ ₈"W x 1Z ₈"D MLD-LC5 KEY-SO3 ARX-PL2 6¹ ₂"W x 2³ ₄"D x 5³ ₄"H Sold separately Cut and fit by installer. KEY-PLN-CE-6XXX* 3¹ ₂"W x 8"D x 8"H KEY-PLN-CR-6XXX* 3¹ ₂"W x 12C v"d x 7C v"h KEY-CB5 Top: 6³ ₈"W x 4"D x 6⁵ ₈"H Sides: 6" (for 5" mldg.) Bottom: 3⁷ ₈"W x 1⁵ ₈"D KEY-AMA-XX-5XXX 1Z x"w x 7C,"H Top: 7"W Bottom: 4B ₈"W ARC-PL3 Sold separately Cut and fit by installer. KEY-SO5* 10¹ ₂"W x 4⁷ ₈"D x 9³ ₄"H KEY-GO5 10¹ ₂"W x 4⁷ ₈"D x 9³ ₄"H KEY-AO5* 7¹,"W x 3"D x 10"H KEY-VS5 5B\,"W x 4B ₈"D x 10"H KEY-ACA-CE-5XXX* 3¹ ₂"W x 5Z ₈"D x 4C,"H KEY-ACA-CR-5XXX* 3¹ ₂"W x 9"D x 4Z x"h KEY-ACA-OC-5XXX* 3¹ ₂"W x 7Z v"d x 4C,"H

3 A R C H E S K E Y S C R O W N S CRW-SX5-86"L Motif: 54"L x 2⁵ ₈"D x 11³ ₄"H MLD-LC3 CRW-SC3 Crown Shell Curved Small 50"L x 2³ ₈"D x 9³ ₄"H 3"W x 1¹ ₄"Thick MLD-LC3 CRW-AO5-86"L Motif: 33"L x 4Z v"d x 10¹ x"h CRW-AO3-84"L Motif: 20C v"l x 2Z x"d x 7¹ x"h CRW-FO5-86"L Motif: 35"L x 4"D x 11¹ ₄"H CRW-FO3-84"L Motif: 21"L x 2¹ ₂"D x 7¹ ₂"H CRW-GO5-86"L Motif: 35"L x 4"D x 11¹ ₄"H CRW-GO3-84"L Motif: 21"L x 2¹ ₂"D x 7¹ ₂"H CRW-OO5-86"L Motif: 35"L x 4"D x 11¹ ₄"H CRW-OO3-84"L Motif: 21"L x 2¹ ₂"D x 7¹ ₂"H CRW-SO5-86"L Motif: 35"L x 4"D x 11¹ ₄"H CRW-SO3-84"L Motif: 21"L x 2¹ ₂"D x 7¹ ₂"H MLD-LC5 MLD-LC3 CRW-VT5 33C v"w x 11Z v"h x 2Z v"thick Sold in pairs, left and right. CRW-VC5* 15C,"W x 19C v"d x 4"Thick

4 B A R E L E M E N T S PNL-PS1 13"W x 30"H x 1¹ ₄"Thick Carving: 10"W x 19³ ₈"H PNL-PS2 13"W x 30"H x 1¹ ₄"Thick Carving: 10"W x 19³ ₈"H PNL-WS1 PNL-WS2 PNL-WS3 PNL-WS4 PNL-WS5 PNL-WS6 PNL-WS7 PNL-WS8 All Wine Story Panels: 11³ ₄"W x 30"H x 1¹ ₄"Thick Carving area: 10" x 19³ ₈" BAR-GB1-39¹ ₂"H Overall: 4⁵ ₈"W x 9³ ₈"D Top: 4⁵ ₈"W x 8³ ₈"D Bottom: 4⁵ ₈"W x 5¹ ₄"D 2"Dia. rail opening- 9" floor to center BAR-GP6 6"Dia. x 34"H Shown with CPL-CR2 Sold separately Overall height:42"h F I N I A L S FIN-AO2* 4¹ ₄"Dia. x 6"H Base: 3¹ ₂"Dia. FIN-CO2 4¹ ₄"Dia. x 6"H Base: 3¹ ₂"Dia. FIN-OO2 4¹ ₄"Dia. x 6"H Base: 3¹ ₂"Dia. FIN-RO2 4¹ ₄"Dia. x 6"H Base: 3¹ ₂"Dia. FIN-WO1 3¹ ₄"Dia. x 5Z x"h Base: 2¹ ₂"Dia.

5 C A B I N E T P A R T S FOT-SR1 5Z x"h x 4Z x"dia. Top: 1Z x"h x 2Z zn"dia. Bottom: B,"H x 1M,"Dia. FOT-VL1 5Z x"h x 5C v"w Top: 1Z x"h x 3"Dia. Bottom: Z x"h x 3"Dia. FOT-IR1 5Z x"h x 4Z x"dia. Top: 1Z x"h x 2C,"Dia. Bottom: Z x"h x 3"Dia. FOT-YR1 5Z x"h x 4Z x"dia. Top: 1Z x"h x 2Z x"dia. Bottom: C,"H x 1C v"dia. APR-AA3 1¹ ₄"D x 3¹ ₂"W at center 2¹ ₂"W at ends x 86"Long Motif: 25⁷ ₈"L APR-GA3 1¹ ₄"D x 3¹ ₂"W at center 2¹ ₂"W at ends x 86"Long Motif: 25⁷ ₈"L FOT-AMA-RD-XXXX 5Z x"h x 4Z x"dia. Top: 1Z v"h x 2Z zn"dia. Bottom: Z x"h x 1B,"Dia. FOT-AH1 5Z x"h x 4Z x"w Top: 1C zn"h x 2C,"W Bottom: Z x"h x 4"W APR-GR3 1¹ ₄"D x 3¹ ₂"W at center 2¹ ₂"W at ends x 86"Long Motif: 26Z,"L APR-IA3 1¹ ₄"D x 3¹ ₂"W at center 2¹ ₂"W at ends x 86"Long Motif: 26Z,"L FOT-GR1 5Z x"h x 4Z x"dia. Top: 1Z x"h x 3C v"dia. Bottom: Z x"h x 1C v"dia. FOT-GR2 5Z x"h x 4Z x"dia. Top: 1Z x"h x 2Z zn"dia. Bottom: B,"H x 1M,"Dia. APR-SA3 1¹ ₄"D x 3¹ ₂"W at center 2¹ ₂"W at ends x 86"Long Motif: 25M,"L APR-VE5* 1Z v"d x 10Z x"h x 86"Long Motif: 33"L thickness at end C v" APR-YA3 1¹ ₄"D x 3¹ ₂"W at center 2¹ ₂"W at ends x 86"Long Motif: 26"L DRF-AMA-XX-3XXX 6³ ₄"H x 32"W x 1"Thick PST-AA2 34Z x"h x 6"W x 6"D PST-AA1 34Z x"h x 6"W x 1Z v"d DRF-LO3 6³ ₄"H x 32"W x 1"Thick Motif: 21Z v"w PST-AAT-WL-5XXX 36"H x 3"W x 3"D PST-YF8 96"H x 3Z x"w x 1"D APR-YW2* 1"D x 7"W at center 3C,"W at ends x 36"Long Motif: 21C v"l PST-AMA-CR-6XXX 97"H x 3"W x 3"D PST-GC8 97"H x 3"W x 3"D PST-IC8 97"H x 3"W x 3"D

6 C A B I N E T P A R T S LEG-AMA-CR-XXXX 7"H x 3Z x"w x 3Z x"d Top: 3"Sq. LEG-ARN-CR-XXXX 7"H x 3Z x"w x 3Z x"d Top: 3"Sq. LEG-AO3 7"H x 3M,"W x 3M,"D LEG-GO3 7"H x 3M,"W x 3M,"D LEG-GR3 7"H x 3M,"W x 3M,"D LEG-IO3 7"H x 3M,"W x 3M,"D LEG-SO3 7"H x 3M,"W x 3M,"D. PST-ARN-WL-4XXX* 36"H x 2C,"W x 2C,"D PST-AP3* 36"H x 3"W x 3"D PST-BAM-WL-XX36 36"H x 3"W x 3"D PST-SP3* 36"H x 3"W x 3"D PST-GP3* 36"H x 3"W x 3"D PST-YP3* 36"H x 3"W x 3"D PST-AC4* 48"H x 3"W x 3"D PST-GC4* 48"H x 3"W x 3"D PST-IC4* 48"H x 3"W x 3"D PST-GR4* 48"H x 3Z x"w x 3Z x"d PST-YC4* 48"H x 3"W x 3"D PST-ARN-RD-XX34 34Z x"h Top & Bottom: 6"Dia. PST-BRD-RD-XX34 34Z x"h x 6"Dia. PST-PLN-TW-XX34 34Z x"h x 6"Dia. PST-WO6 34Z x"h x 6" x 6" overall Top Block: 6Z,"H x 6"Sq. PST-MAB-TW-5XXX 36"H x 5"W x 5"D LEG-VL4 35"H x 4C v"w x 4C v"d Top Block: 3Z x"w x 3Z x"d

7 C A P I T A L S C O L U M N S CPL-CP4* 12"H Top: 13"W x 6Z ₄"D Bottom: 7"W x 3Z ₄"D CPL-IP3* 9³ ₄"W x 4³ ₄"H x 2¹ ₂"Thick Inside Height: 4¹ ₄" CPL-CR4 12"H Top: 12³ ₄"Sq. Bottom: 8"Dia. CPL-CS412"H Top: 12³ ₄"Sq. Bottom: 7"Sq. CLM-FLU-RD-6X52* 52"H Top: 6¹ ₄"D Bottom: 6"D Use with CPL-CR3 CLM-FD4* Top: 7"W x 3Z ₄"D Flute: ¹ ₂"W With top molding Specify Ht. CLM-FP3* 5"W x 1¹ ₁₆"D Flute: ¹ ₂"W Specify Ht. CLM-AF4 (4-pcs.) 82¹ ₂"H shown Max. 103¹ ₂"H Specify Ht. CLM-FS4 Hollow OD: 7"Sq. ID: 5"Sq. Specify Ht. CLM-ARX Top: 6¹ ₄"D x 12"W Column: 1¹ ₄"D x 12"W Shown 8'H, specify height CLM-ALX matching left-facing angel (not shown) CLM-AOX Front facing angel also available CLM-PD4* 11Z x"w x 5¹ x"d x 10"H CLM-PP3* 7¹ ₂"W x 2¹ ₄"D x 8"H CLM-PP6 11³ ₈"Sq. x 5¹ ₂"H CLM-PB4 11Z x"sq. x 10"H CLM-ACA-RD-6XXX* 18Z x"h Top: 6C,"D Bottom: 7Z v"d Carving: 11M,"H CPL-MR3 10"H Top: 10"D Bottom: 5"D CPL-MS3 10"H Top: 8Z v"sq. Bottom: 5"Sq.

8 C A P I T A L S C O L U M N S CPL-AMA-SQ-6XXX 10"H Top: 9Z ₄"Sq. Bottom: 5"Sq. CPL-AMG-SQ-6XXX 10"H Top: 9Z ₄"Sq. Bottom: 5"Sq. CPL-CR1 5³ ₄"H Top: 5¹ ₄"Sq. Bottom: 2¹ ₂"Dia. CPL-CR2 8"H Top: 9"Sq. Bottom: 4"Dia. CPL-CR3 10"H Top: 9¹ ₄"Sq. Bottom: 5"Dia. CPL-CR4 12"H Top: 12³ ₄"Sq. Bottom: 8"Dia. CLM-RR3 52"H Top: 6"D Bottom: 7B,"D CLM-AA3 Half Round 9C v"w x 4C v"d x 42"H CLM-AMA-SQ-6X52 52"H Top: 5¹ ₄"Sq. Bottom: 7"Sq. CLM-AMG-SQ-6X52 52"H Top: 5¹ x"sq. Bottom: 7"Sq. CLM-AF1 4¹ ₄"Dia. x 52"H Carving: 12"H CLM-AF2 6"Dia. x 52"H Carving: 14³ ₄"H CLM-AF3 7"Dia. x 52"H Carving: 17³ ₄"H CLM-GO3 9"Dia. x 52"H CLM-PR3 17"H Top: 7"D Bottom: 7"D R O S E T T E S ROS-FL2 5¹ ₂"Dia. x 2¹ ₂"Thick 4" ROS-YS1 5"Sq. x C v"thick ROS-FIL 6³ ₄"Dia. x ³ ₈"Thick Adapter for ROS-FL2, or 4" can light. ROS-YR1 3Z x"w x 5"H x C v"thick ROS-ARN-RE-5XXX* 5Z x"w x 8Z x"h x 1"Thick ROS-AC2* 7"Dia. x 1"Thick ROS-AO2* 5¹ ₂"W x 8¹ ₂"H x 1¹ ₂"Thick 6" ROS-FC1* 4³ ₈"Dia. x ³ ₄"Thick ROS-ST2* 6"Sq. x 1"Thick ROS-LS1 3Z x"sq. x 1C v"thick ROS-AM6* 17"Dia. x 2³ ₄"Thick * Indicates items available in other sizes not shown. ROS-AS2* 7"Sq. x 1"Thick ROS-DR2* 7"Dia. x 1Z v"thick

9 C O R B E L S CBL-AAC0* 3Z x"w x 3M,"D x 6B,"H CBL-AAC-PI-0214* 6Z v"w x 2Z x"d x 14B,"H CBL-AA2* 5C v"w x 7C,"D x 14"H CBL-AB2 3³ ₄"W x 8¹ ₂"D x 13"H CBL-AMA-PI-6XXX* 7"W x 3Z v"d x 22"H CBL-AA4* 9C v"w x 11"D x 34"H CBL-AMA-BL-54XX* 3C v"w x 6Z v"d x 14"H CBL-AC2 10Z x"w x 7Z x"d x 11Z v"h CBL-AN2 3³ ₄"W x 8¹ ₂"D x 13"H CBL-AMA-PC-XXXX 3C v"w x 8Z x"d x 13"H CBL-AAC3* 7B,"W x 8C v"d x 26Z x"h CBL-AB9 8¹ ₄"W x 18¹ ₂"D x 35¹ ₄"H Top: 2³ ₄"Thick CBL-AD3* 7"W x 6¹ ₂"D x 10¹ ₂"H Top: 6"W x 5¹ ₄"D CBL-AM1 5¹ ₄"W x 4¹ ₈"D x 12³ ₈"H CBL-AO3* 8C v"w x 8Z ₄"D x 26¹ ₂"H CBL-AO4 9"W x 10⁵ ₈"D x 34"H CBL-ARN-XX-5XXX* 5C v"w x 7C,"D x 14"H CBL-AR2 9Z x"w x 5M,"D x 10C v"h CBL-AP3* 7"W x 3¹ ₄"D x 22"H CBL-ARN-HR-5XXX* 7"W x 3B,"D x 11Z v"h CBL-ARN-PC-0112* 1Z x"w x 8Z v"d x 12"H CBL-AW2 8¹ ₈"W x 6¹ ₄"D x 14"H CBL-CC2 5³ ₄"W x 7³ ₈"D x 14"H CBL-CH1 10¹ ₂"W x 3³ ₈"D x 5"H CBL-FO1 4³ ₄"W x 5³ ₄"D x 9¹ ₂"H CBL-FO2* 5³ ₄"W x 7³ ₈"D x 14"H *Indicates items available in other sizes not shown.

10 CORBELS CBL-DO2 3³ ₄"W x 9¹ ₂"D x 13"H CBL-LO2* 6¹ ₂"W x 6¹ ₄"D x 12¹ ₂"H Top: 6¹ ₄"W x 5"D CBL-GN1* 3"W x 6¹ ₈"D x 9¹ ₂"H CBL-GB2 3³ ₄"W x 8¹ ₂"D x 13"H CBL-EO3 9¹ ₂"W x 7"D x 17H" Top: 5³ ₈"D CBL-GO3* 7⁵ ₈"W x 8³ ₄"D x 26¹ ₂"H CBL-HO2 5¹ ₄"W x 6¹ ₄"D x 11¹ ₂"H Top: 3³ ₄"W x 5"D CBL-MOX* 2B,"W x 2C v"d x 4Z x"h CBL-LW2* 8"W x 6"D x 14"H CBL-LA2* 7"W x 10"D x 12"H Backboard: 1¹ ₈"Thick CBL-SO2 3³ ₄"W x 8¹ ₂"D x 14"H CBL-MAB-TW-54XX 3C v"w x 8Z x"d x 13"H CBL-MO2* 5C v"w x 7C,"D x 14"H CBL-LB1* 3¹ ₂"W x 6"D x 6"H CBL-LN2* 4"W x 4¹ ₄"D x 12¹ ₂"H CBL-ST2* 3C v"w x 8Z x"d x 13"H CBL-MAB-PC-4XXX 1C v"w x 8Z v"d x 12Z v"h CBL-RP3* 7"W x 3Z v"d x 22"H CBL-SB2* 3C v"w x 8Z x"d x 13"H CBL-OO4* 9"W x 10⁵ ₈"D x 34"H CBL-TM1 5¹ ₄"W x 4¹ ₈"D x 12³ ₈"H CBL-SHL-XX-44XX* 3"W x 6"D x 9Z x"h CBL-SN2* 3³ ₄"W x 8B,"D x 13"H CBL-PO4* 9"W x 10⁵ ₈"D x 34"H CBL-RO2* 5³ ₄"W x 7³ ₈"D x 14"H CBL-TO3* 7⁵ ₈"W x 8⁵ ₈"D x 26¹ ₂"H CBL-TN2 3³ ₄"W x 8¹ ₂"D x 13"H CBL-TB2 3³ ₄"W x 8¹ ₂"D x 13"H CBL-TW2 8¹ ₄"W x 6³ ₈"D x 14"H

11 C O R B E L S CBL-YO1* 4C v"w x 5C v"d x 9Z x"h CBL-VG2 2Z x"w x 8Z x"d x 14"H CBL-VF2 5C 4"W x 8C v"d x 14"H CBL-VH3 10"W x 12"D x 18"H CBL-YO3* 7B,"W x 8C v"d x 26Z x"h *Indicates items available in other sizes not shown. CBL-VS1 3"W x 2C v"d x 5"H M A N T E L S C O M P O N E N T S BAS-AD9-42"H Top: 9¹ ₄" W x 8"D Bottom: 9¹ ₄"W x 3"D BAS-AMA-XX-3X42* 42"H Top: 8"W x 7Z ₂"D Bottom: 8"W x 5¹ ₄"D BAS-ARN-XX-3X42 42"H Top: 8"W x 6B,"D Bottom: 8"W x 4"D BAS-RH3 Headblock and plinth included. Parts unassembled. 8³ ₄"W x 10¹ ₂"D x 37"H Top: 5"W x 5³ ₈"D Base: 6"W x 7¹ ₂"D x 2³ ₄"H BAS-RH9 9¹ ₄"W x 11³ ₄"D x 42"H Top: 8"D BAS-GO3* -42"H Top: 8"W x 7"D Bottom: 8"W x 4"D BCK-SP1 9¹ ₂"W x 42"H x 1¹ ₄"Thick BCK-SP3 also available 11¹ ₂"W x 54"H x 1¹ ₄"Thick HED-BLK Head Block 10¹ ₄"W x 5"D x 2¹ ₂"H PLI-OO2 Plinth Base 9¹ ₄"Sq. x 1³ ₄"H PLI-OO6 Plinth Base-6"H Top: 7⁵ ₈"W x 8⁵ ₈"D Bottom: 9"W x 9¹ ₄"D HED-LO3 Head Block 8 ¹ ₂"W x 6³ ₄"D x 2¹ ₄"H HED-LO4 also available 10¹ ₄"W x 9¹ ₄"D x 2¹ ₄"H

12 M A N T E L S C O M P O N E N T S MTL-ANF MTL-ARN-FC-7X85 MTL-EF4 MTL-FIL BAS-ARN-XX-3X42 Back Splat MTL-CHM BAS-CL9 BAS-CR9 MLD-FB9 (Modified) MTL-LLM BAS-LO4 MLD-AB9 (Modified) Back Splat MTL-LMM BAS-LO3 MLD-DO2 MLD-EO3 MLD-PC4 Back Splat MTL-LCM MLD-OB6 (Modified) CBL-OO3 s Back Splat MTL-AMF MTL-AMA-FC-7X85 MTL-AMA-FE-7X04 BAS-AMA-XX-3X42 Back Splat MTL-ARN-FC-6X52-52"L Motif: 26C,"L x 6"H x 1¹ x"thick at center MTL-YO5-52"L Motif: 26"L52"L x 6"H x 1¹ x"thick MTL-EF4 48"L x 7"H x 2¹ ₄"Thick MTL-EF8 also available 96"L x 7"H x 2¹ ₄"Thick MTL-ARN-FC-7X85-85"L Motif: 50"L x 7"H x 4Z,"Thick at center MTL-FF7-85"L Motif: 51¹ ₂"L x 7"H x 4"Thick at center MTL-OF7-85"L Motif: 51¹ ₂"L x 7"H x 4"Thick at center MTL-PF7-85"L Motif: 51¹ ₂"L x 7"H x 4"Thick at center MTL-FIL Mantel Fill Bottom 85"L x 9"D x 2⁵ ₈"Thick MTL-SF7-85"L Motif: 51¹ ₂"L x 7"H x 4"Thick at center MTL-AMA-AF-7X85-85"L Motif: 67C v"l x 10C v"h x 1¹ v"thick MTL-VE7* 85"W x 13"H x 2¹ x"thick, Motif: 54"L

13 M A N T E L S C O M P O N E N T S BAS-LO3 w/plinth 42"H w/o plinth- 36"H Top: 8¹ ₂"W x 6³ ₄"D Bottom: 9"W x 6¹ ₂"D BAS-IO9-42"H Top: 9Z x"w x 3C ₄"D Bottom: 3³ ₄"D BAS-CC9-42"H Top: 9¹ ₄"W x 6¹ ₄"D Base: 9¹ ₂"W x 6"D BAS-CL3-40³ ₄"H Top: 9¹ ₄"Sq. Bottom Ring: 7¹ ₄"Dia. Carving: 8¹ ₄"Dia. x 13¹ ₄"H BAS-SO3 BAS-TO3-42"H (Glass eyes supplied) Top: 8"W x 3¹ ₄"D w/plinth 42"H Bottom: 6¹ ₂"W x 2³ ₄"D w/o Plinth- 36"H Top: 8¹ ₄"W x 8"D Bottom: 9³ ₄"W x 9⁷ ₈"D x 7"H BAS-DO9 10¹ ₂"W x 10¹ ₂"D x 42"H BAS-AR9 12"W x 5"D x 50"H Bottom: 13¹ ₂"W x 2¹ ₄"D BAS-AL9 (not shown) matching left-facing angel BAS-AO9 front-facing angel also available BAS-AL3 Headblock and onlay base included. Parts unassembled. w/hed-blk & ONL-AB3 45"H Angel: 11¹ ₂"W x 5"D x 28"H Top: 6¹ ₂"W x 3¹ ₄"D BAS-AR3 (not shown) matching right-facing angel BAS-AO3 front-facing angel also available Components top to bottom priced and sold separately: BAS-HB3 10"W x 10"D x 3⁵ ₈"H BAS-CL4 8"W x 8¹ ₂"D x 38"H BAS-CR4 (not shown) matching right-facing cherub BAS-AP7 11"W x 8¹ ₄"D x 13"H BAS-CO4 front-facing cherub also available BAS-CR9 Assembly-54"H Top: 11¹ ₂"W x 11"D Base: 11¹ ₂"W x 9¹ ₂"D Complete with back splat BAS-CL9 matching left-facing cherub (not shown) BAS-CO9 front-facing cherub also available Components top to bottom priced and sold separately: HED-LO4 10¹ ₄"W x 9¹ ₄"D x 2¹ ₄"H BAS-DO3-33³ ₄"H Top: 8¹ ₄"W x 8³ ₈"D Bottom: 8¹ ₄"W x 9"D w/hed-blk 36"H w/hed-blk & PLI "H PLI-OO6-6"H Top: 7⁵ ₈"W x 8⁵ ₈"D Bottom: 9"W x 9¹ ₄"D BAS-LO4-50"H Top: 10¹ ₄"W x 9¹ ₄"D Bottom: 9¹ ₄"W x 7¹ ₄"D Components top to bottom priced and sold separately: BAS-VS2 8"W x 6Z v"d x 10C,"H BAS-VE3 7C,"W x 6B,"D x 30Z x"h PLI-VS1 7M,"W x 6C v"d x 4"H

14 M O L D I N G S MLD-AB2* 2³ ₈"W x 1¹ ₄"Thick (4" repeat) MLD-AA4 4"W x 1Z v"thick (12" repeat) MLD-AD3* 2³ ₄"W x 2"D (4" repeat) MLD-AAM-BU-6X08 (Butt) 5C v"w x 1¹ ₄"Thick (12" repeat) MLD-AAM-CW-6X08 (Crown) 3B,"W x 4Z x" Displaced MLD-AO3 3"W x 1¹ ₄"Thick (6" repeat) MLD-AB5 5¹ ₄"W x 1³ ₄"Thick (6" repeat) MLD-ARN-AT-XX08 1ZZ zn"w x ZC zn"thick (12" repeat) MLD-ARN-TR-XX08 1ZZ zn"w x ZC zn"thick (3" repeat) MLD-AB6 (Butt) 5³ ₄"W x 1¹ ₄"Thick (6" repeat) MLD-AC6 (Crown) 3⁵ ₈"W x 4¹ ₂" Displaced MLD-AAL-BU-6X08 (Butt) 5C v"w x 1¹ ₄"Thick (12" repeat) MLD-AAL-CW-6X08 (Crown) 3B,"W x 4Z x" Displaced MLD-BA1 1C v"w x B,"Thick (1Z x" repeat) MLD-BA2 1ZZ zn"w x ZC zn"thick (3" repeat) MLD-AD5 5"W x 3³ ₈"D (7¹ ₂" repeat) MLD-AB9 (Butt) 9⁷ ₈"W x 1³ ₄"Thick (9"repeat) MLD-AC9 (Crown) 6³ ₄"W x 7¹ ₄" Displaced MLD-BAM-TR-XX08 1"W x > zn"thick (12" repeat) MLD-AP4 3³ ₄"W x 1"Thick (24" repeat) MLD-BO2* 1¹ ₂"W x ⁷ ₈"Thick (4" repeat) MLD-BP2 1¹ ₂"W x ⁷ ₈"Thick MLD-BT1 1³ ₈"W x 1¹ ₂"Thick (2¹ ₂" repeat) MLD-BT2* 1ZZ zn"w x ZC zn"thick (3" repeat) MLD-AR5 5³ ₈"W x ⁷ ₈"Thick (2" repeat) ¹ ₄"Top Groove MLD-ARN-PC-XX08 3"W x M,"Thick (24" repeat) MLD-ARN-BU-9X08 (Butt) 9⁷ ₈"W x 1³ ₄"Thick (24" repeat) MLD-ARN-CW-9X08 (Crown) 6³ ₄"W x 7¹ ₄" Displaced 5" 5" MLD-DO1 1"W x 1"Thick (1" repeat) Sold in 8' lengths only MLD-CB5 5³ ₈"W x 1"Thick (24" repeat) ¹ ₄"Top Groove MLD-AC7 (Cove) 7"W x 1C v" Thick (4" repeat) 5"W x 5" Displaced 5" MLD-DO2* 1¹ ₂"W x 1³ ₄"Thick (1¹ ₂" repeat) 5" MLD-EA1* 1⁵ ₈"W x ⁵ ₈"Thick (2" repeat) Sold in 8' lengths only. MLD-CF5 5⁷ ₈"Wx 1¹ ₄"Thick (4" repeat) MLD-GC7 7"W x 2⁵ ₈"Thick- 5" Displaced (1¹ ₂" repeat) MLD-EO1 ¹¹ ₁₆"W x ⁵ ₈"Thick (2" repeat) MLD-EA3 3³ ₈"W x 1³ ₄"Thick (3" repeat) MLD-EO3 1⁵ ₈"W x 1¹ ₄"Thick (3" repeat) MLD-EO4 2"W x 1¹⁷ ₁₆"Thick (4" repeat) MLD-FF3 3¹ ₄"W x 1¹ ₄"Thick (24"repeat) ¹ ₄"Top Groove MLD-FB6 (Butt) 5³ ₄"W x 1¹ ₄"Thick (12" repeat) MLD-FC6 (Crown) 3⁵ ₈"W x 4¹ ₂" Displaced MLD-FA2 1¹¹ ₁₆"W x ¹³ ₁₆"Thick (2¹ ₂" repeat) MLD-FA3 2³ ₄"W x 1³ ₁₆"Thick (6" repeat) MLD-FL5 5¹ ₂"W x 1"Thick (1¹ ₄" repeat) Flutes: ¹³ ₁₆"W x ¹ ₄"D (⁹ ₁₆"Flat) MLD-EA4 4¹ ₄"W x 1⁷ ₁₆"Thick (4" repeat) MLD-FL2 2⁵ ₈"W x ⁷ ₈"Thick (1¹ ₄" repeat) Flutes ¹³ ₁₆"W x ¹ ₄"D (⁹ ₁₆"Flat) ¹ ₄"Top Groove MLD-FO3 3"W x 1¹ ₄"Thick (12" repeat) MLD-FB9 (Butt) 9⁷ ₈"W x 1³ ₄"Thick (18" repeat) MLD-FC9 (Crown) 6³ ₄"W x 7¹ ₄" Displaced

15 M O L D I N G S MLD-FL3 2³ ₄"W x 1¹ ₄"Thick (³ ₄" repeat) MLD-FP3 3"W x 1"Thick (24" repeat) MLD-GB6 (Butt) 5³ ₄"W x 1¹ ₄"Thick (24" repeat) MLD-GC6 (Crown) 3⁵ ₈"W x 4¹ ₂" Displaced MLD-GB9 (Butt) 9⁷ ₈"W x 1³ ₄"Thick (18" repeat) MLD-GC9 (Crown) 6³ ₄"W x 7¹ ₄" Displaced MLD-GL3 2⁵ ₈"W x 1"Thick (3" repeat) ¹ ₄"Top Groove MLD-GF5 5¹ ₄"W x 1"Thick (8" repeat) MLD-GO3 3"W x 1¹ ₄"Thick (24" repeat) MLD-HP3 3"W x 1"Thick (24" repeat) MLD-LB3* 8"W x 1¹ ₄"Thick (6" repeat) MLD-GP3 3"W x 1"Thick (24" repeat) MLD-LA2* 1¹¹ ₁₆"W x ¹³ ₁₆"Thick (8" repeat) MLD-LC3 3"W x 1¹ ₄"Thick (6" repeat) MLD-LO3 3"W x 1¹ ₄"Thick (5" repeat) MLD-LC5 5"W x 2¹ ₄"Thick (8" repeat) MLD-LA3 2³ ₄"W x 1¹ ₄"Thick (12" repeat) MLD-LT2* 2"W x ³ ₄"Thick (24" repeat) MLD-LV3* 3¹ ₄"W x 1¹ ₄"Thick (12" repeat) ¹ ₄"Top Groove MLD-MB6 (Butt) 5³ ₄"W x 1¹ ₄"Thick (24"repeat) MLD-MC6 (Crown) 3⁵ ₈"W x 4¹ ₂" Displaced MLD-NO3 3"W x 1Z v"thick (4" repeat) MLD-MD3 3¹ ₄"W x 1¹ ₄"Thick (6" repeat) ¹ ₄"Top Groove MLD-NB6 (Butt) 5C v"w x 1¹ ₄"Thick (6" repeat) MLD-NC6 (Crown) 3B,"W x 4Z x" Displaced MLD-OO3 3"W x 1¹ ₄"Thick (12" repeat) MLD-NA5 5³ ₈"W x 1¹ ₄"Thick (4" repeat) ¹ ₄"Top Groove MLD-OP3 3"W x 1"Thick (24" repeat) MLD-OB3 3¹ ₂"W x 1¹ ₄"Thick (12" repeat) ¹ ₄"Top Groove MLD-OB9 (Butt) 9⁷ ₈"W x 1³ ₄"Thick (24" repeat) MLD-OC9 (Crown) 6³ ₄"W x 7¹ ₄" Displaced MLD-PC4* 3³ ₈"W x 1¹ ₄"Thick (at 30 only) 3"Displaced ¹ ₄"Tongue MLD-PO3 2³ ₄"W x 1¹ ₄"Thick MLD-OB6 (Butt) 5³ ₄"W x 1¹ ₄"Thick (24" repeat) MLD-OC6 (Crown) 3⁵ ₈"W x 4¹ ₂" Displaced MLD-PB9 (Butt) 9⁷ ₈"W x 1³ ₄"Thick MLD-PC9 (45 Crown) 6³ ₄"W x 7¹ ₄"Displaced MLD-PT1 1⁵ ₈"D -PT2 2³ ₈"D -PT3 3¹ ₄"D x 1⁵ ₈"W x ¹ ₄"Tongue MLD-PC6 4⁵ ₈"W x 1¹ ₄"Thick (at 30 only) 3³ ₄"Displaced ¹ ₄"Tongue MLD-RA2* 1¹¹ ₁₆"W x ¹³ ₁₆"Thick (6" repeat) MLD-PL5 5³ ₈"W x 1¹ ₄"Thick (12" repeat) ¹ ₄"Top Groove MLD-RB3* 3¹ ₄"W x 1¹ ₄"Thick (6" repeat) ¹ ₄"Top Groove MLD-RA4 4"W x 1³ ₁₆"Thick (12" repeat) SOME OF OUR MOLDINGS CAN BE MANUFACTURED IN RESIN

16 M O L D I N G S MLD-RT1* 1C,"W x C v"thick (1Z x" repeat) MLD-SP3 3"W x 1"Thick (24" repeat) MLD-RB5 5³ ₄"W x 1¹ ₄"Thick (12" repeat) ¹ ₄"Top Groove MLD-SB6 (Butt) 5³ ₄"W x 1¹ ₄"Thick (24" repeat) MLD-SC6 (Crown) 3⁵ ₈"W x 4¹ ₂" Displaced MLD-VL3 2Z v"w x 1Z v"thick (3" repeat) MLD-SW3 2⁵ ₈"W x 1"Thick (3" repeat) ¹ ₄"Top Groove MLD-WVE-TR-XX08 1ZZ zn"w x ZC zn"thick (16" repeat) MLD-YA2 1ZZ zn"w x ZC zn"thick (6" repeat) MLD-VB6 (Butt) 5C v"w x 1¹ ₄"Thick (24" repeat) MLD-VC6 (Crown) 3B,"W x 4Z x" Displaced MLD-VB9 (Butt) 9⁷ ₈"W x 1³ ₄"Thick (12" repeat) MLD-VC9 (Crown) 6³ ₄"W x 7¹ ₄" Displaced MLD-VH4 4"W x 1"Thick (19ZC zn" repeat) MLD-YO3 3"W x 1Z v"thick (12" repeat) MLD-VR3* 2C v"w x 1ZC zn"thick (19ZC zn" repeat) MLD-VH9 8"W x 1Z ₄"Thick (19C zn" repeat) MLD-YP3 3"W x C v"thick (24" repeat) MLD-YB6 (Butt) 5C v"w x 1¹ ₄"Thick (24" repeat) MLD-YC6 (Crown) 3B,"W x 4Z x" Displaced SOME OF OUR MOLDINGS CAN BE MANUFACTURED IN RESIN O N L A Y S MLD-YB9 (Butt) 9⁷ ₈"W x 1³ ₄"Thick (24" repeat) MLD-YC9 (Crown) 6³ ₄"W x 7¹ ₄" Displaced ONL-YO2* 6¹ ₂"W x 8"H x 1"Thick ONL-YM3-L* 4⁷ ₈"W x 15"H x ³ ₄"Thick ONL-YM3-R* 4⁷ ₈"W x 15"H x ³ ₄"Thick ONL-YT2* 9"W x 5¹ ₂"H x ⁹ ₁₆"Thick Sold in pairs, left and right ONL-YC2 8"W x 8"H x ³ ₄"Thick Sold in pairs, left and right ONL-YP4 2³ ₄"W x 26"H x ⁵ ₈"Thick ONL-VB4 11B ₈"W x 24Z v"h x 1"Thick ONL-VW4 11B ₈"W x 24Z v"h x 1"Thick *Indicates items available in other sizes not shown.

17 O N L A Y S ONL-AT2* 9"W x 3⁷ ₈"H x ³ ₄"Thick Sold in pairs, left and right ONL-AC2* 8"W x 8"H x ⁵ ₈"Thick ONL-AH6-2pc.* 48"W x 8"H x 1¹ ₄"Thick ONL-AV2* 5¹ ₄"W x 9"H x 1³ ₁₆"Thick ONL-AH4* 24"W x 5¹ ₂"H x ³ ₄"Thick ONL-AM2* 4¹ ₂"W x 11"H x ³ ₄"Thick ONL-ARN- MD-5XXX* 4¹ ₂"W x 11"H x ³ ₄"Thick ONL-ARN-HO-7XXX* 24"W x 4³ ₄"H x C v"thick ONL-FC0 3¹ ₄"W x 5"H x 1⁵ ₈"Thick ONL-CP0-5"H Top: 3¹¹ ₁₆"W x 1¹ ₂"D Bottom: 3"W x 1"D Available as an onlay only ONL-ARN-PR-5XXX* 9"W x 4¹ ₂"H x C v"thick Sold in pairs, left and right ONL-ARN-PD- 7XXX 2³ ₄"W x 26"H x ³ ₄"Thick ONL-FM2 5"W x11"h x ³ ₄"Thick ONL-CO3 20"W x4¹ ₂"H x ³ ₄"Thick ONL-FT1* 7"W x 3¹ ₂"H x ¹ ₂"Thick Sold in pairs, left and right ONL-CM2 4³ ₄"W x11"h x ³ ₄"Thick ONL-DH5 36"W x 6³ ₈"H x 1"Thick ONL-FP3* 3³ ₄"W x 16"H x 1"Thick ONL-FG5* 20"W x 6¹ ₂"H x 1¹ ₂"Thick ONL-GT2 9"W x 5¹ ₂"H x ¹ ₂"Thick Sold in pairs, left and right ONL-FF3 14⁵ ₈"W x 6"H x 1"Thick ONL-FM3 6C,"W x 15"H x 1Z ₄"Thick ONL-GO3* 9¹ ₂"W x 11¹ ₂"H x 1¹ ₄"Thick ONL-FH5* 36"W x 6³ ₈"H x 1¹ ₄"Thick *Indicates items available in other sizes not shown.

18 O N L A Y S ONL-GH5* 36"W x 6"H x ³ ₄"Thick ONL-HT5* 36"W x 6¹ ₂"H x 1¹ ₄"Thick ONL-GM3* 5¹ ₂"W x 15"H x ³ ₄"Thick ONL-LH2 24"L x 2"H x ³ ₄"Thick ONL-OT2* 9"W x 4¹ ₂"H x ³ ₄"Thick Sold in pairs, left and right ONL-OM2 4³ ₄"W x 11"H x ³ ₄"Thick ONL-OH4 24"W x 4³ ₄"H x ³ ₄"Thick ONL-RT1 4"W x 6¹ ₄"H x ¹ ₂"Thick Sold in pairs, left and right ONL-LP4 2³ ₄"W x 26"H x ³ ₄"Thick ONL-RH5* 36"W x 4¹ ₂"H x 1"Thick ONL-RM2* 4¹ ₄"W x 11"H x ⁵ ₈"Thick ONL-LF3* 9⁵ ₈"W x 12¹ ₈"H x 3"Thick ONL-SO0* 3³ ₄"W x 4"H x ³ ₄"Thick ONL-SH3* 20"W x 4¹ ₂"H x ⁵ ₈"Thick ONL-SC3* 12"W x 12"H x ³ ₄"Thick 16¹ ₄"Diag. x 8"H ONL-VT2 6Z v"w x 6Z v"h x C v"thick Sold in pairs, left and right ONL-VF1 8B,"W x 5B,"H x C v"thick ONL-VH5 36"W x 7³ v"h x 1Z v"thick ONL-VE2 12Z v"w x 4C v"h x C v"thick ONL-SM3* 6³ ₈"W x 15"H x ⁷ ₈"Thick ONL-YH4* 24"W x 4³ ₄"H x ⁷ ₈"Thick *Indicates items available in other sizes not shown.

19 P A N E L S P U L L S PNL-AMA-XX-76XX 18"W x 28"H x > zn"thick Carving: 9⁵ ₈"W x 16¹ ₂"H x M," Thick PNL-ARN-XX-76XX 18"W x 28"H x > zn"thick Carving: 9⁵ ₈"W x 18⁵ ₈"H x 1" Thick PNL-BAM-XX-76XX 18"W x 28"H x > zn"thick Carving: 9³ ₄"W x 16¹ ₂"H x 1" Thick PNL-PPL-XX-76XX 18"W x 28"H x > zn"thick Carving: 9¹ ₄"W x 15³ ₄"H x 1" Thick PNL-CC2 11¹ ₂"W x 18¹ ₄"H PNL-YN2* 9¹ ₂"W x 18¹ ₄"H PNL-SN2* 9¹ ₂"W x 18¹ ₄"H PNL-LM2* 11¹ ₂"W x 18¹ ₄"H PNL-MAB-RT-76XX 18"W x 28"H x > zn"thick Carving: 9³ ₁₆"W x 17⁷ ₈"H x 1" Thick PNL-VFB-XX-76XX 18"W x 28"H x > zn"thick Carving: 11"W x 11"H x 1" Thick PNL-VHR-XX-76XX 18"W x 28"H x > zn"thick Carving: 10¹ ₂"W x 16"H x 1" Thick PNL-VNY-XX-76XX 18"W x 28"H x > zn"thick Carving: 12¹ ₄"W x 18"H x 1" Thick Panels above cut to size and fit by installer. (Images cropped to show carving ) PUL-AO3 20"W x 3³ ₄"H x 1¹ ₂"Thick PUL-GO3 20"W x 3³ ₄"H x 1¹ ₂"Thick PUL-SO3 20"W x 3³ ₄"H x 1¹ ₂"Thick PNL-GM3* 11¹ ₂"W x 25¹ ₄"H PNL-AM3* 11¹ ₂"W x 25¹ ₄"H PNL-ON3* 9¹ ₂"W x 25¹ ₄"H PNL-FW3* 16¹ ₂"W x 25¹ ₄"H PUL-AO1 12"W x 3³ ₄"H x 1¹ ₂"Thick PUL-DR0 1³ ₄"dia x 1³ ₄"deep PUL-GR0 1³ ₄"Dia. x 2¹ ₈"Deep PUL-GO1 12"W x 3³ ₄"H x 1¹ ₂"Thick PUL-LH1 12"W x 2³ ₄"H x 1¹ ₂"Thick PUL-LV2 2¹ ₄"W x 15"H x 2"Thick PUL-SO1 12"W x 3³ ₄"H x 1¹ ₂"Thick PUL-RR0 1³ ₄"Dia. x 2¹ ₈"Deep PUL-SR0 1³ ₄"dia x 1³ ₄"deep PUL-LV1 2¹ ₄"W x 10"H x 1³ ₈"Thick PUL-VO1 2⁷ ₈"W x 10"H x 2¹ ₄"Thick *Indicates items available in other sizes not shown.

20 S T A I R P A R T S TRD-CLS-CR-5XXX 6"W x 6"H x ³ ₄"Thick BLR-AF3* 38"H Top: 2³ ₄"Sq. Bot: 3¹ ₂"Sq. NWL-AF5* 51"H Top: 5"Sq. Bot.: 5³ ₈"Sq. BLR-AMA- XX-6XXX* 38"H Top: 2³ ₄"Sq. Bot.: 2³ ₈"Sq. NWL-AMA- XX-7XXX* 51"H Top: 5"Sq. Bot.: 5³ ₈"Sq. BLR-ARN- XX-6XXX* 38"H Top: 2³ ₄"Sq. Bot.: 3¹ ₂"Sq. NWL-ARN- XX-7XXX* 51"H Top: 5"Sq. Bot.: 5³ ₈"Sq. BLR-GF3* 38"H Top: 2³ ₄"Sq. Bot.: 3¹ ₂"Sq. NWL-GF5* 51"H Top: 5"Sq. Bot.: 5³ ₈"Sq. BLR-GO3* 38"H Top: 2³ ₄"Sq. Bot.: 3¹ ₂"Sq. NWL-GO5* 51"H Top: 5"Sq. Bot.: 5³ ₈"Sq. BLR-PO3* 38"H Top: 2³ ₄"Sq. Bot.: 3¹ ₂"Sq. BLR-PO5 38"H Top: 2³ ₄"Sq. Bot.: 5³ ₈"Sq. NWL-PO5* 52"H Top: 5"Sq. Bot.: 5³ ₈"Sq. NWL-PO7 52"H Top: 6¹ ₂"Sq. Bot.: 7"Sq. BLR-SF3* 38"H Top: 2³ ₄"Sq. Bot.: 3¹ ₂"Sq. NWL-SF5* 51"H Top: 5"Sq. Bot.: 5³ ₈"Sq. BLR-TF3* 38"H Top: 2³ ₄"Sq. Bot.: 3¹ ₂"Sq. NWL-TF5* 51"H Top: 5"Sq. Bot.: 5³ ₈"Sq.

PRODUCT GUIDE. LANDSCAPE & ARCHITECTURAL LIGHTING The Intersection of Art and Engineering. fxl.com

PRODUCT GUIDE. LANDSCAPE & ARCHITECTURAL LIGHTING The Intersection of Art and Engineering. fxl.com PRODUCT GUIDE LANDSCAPE & ARCHITECTURAL LIGHTING The Intersection of Art and Engineering fxl.com FINISHES Metals Powder coat Standard Powder coat Specialty Composites AB on copper AB on brass AT on copper

More information

Field Name Data Type Notes. Text Required Text Required. Text Required Text Required. Required Number Required. Number Required.

Field Name Data Type Notes. Text Required Text Required. Text Required Text Required. Required Number Required. Number Required. CSV Invoice Format Column Position 1 2 3 4 5 6 7 8 9 10 Campus* Field Name Data Type Notes Supplier * Invoice * Order * Invoice Date* Total Invoice Amount* Total Sales Tax Amount* Discount Amount Discount

More information

Work hard. Be nice. Name: Period: Date: UNIT 2: Atomic Concepts Lesson 1: Give me an element, any element

Work hard. Be nice. Name: Period: Date: UNIT 2: Atomic Concepts Lesson 1: Give me an element, any element 1 Name: Period: Date: KIPP NYC College Prep General Chemistry UNIT 2: Atomic Concepts Lesson 1: Give me an element, any element Do Now: By the end of today, you will have an answer to: How do you know

More information

Chemistry*120* * Name:! Rio*Hondo*College* * * EXAMPLE*EXAM*1*!

Chemistry*120* * Name:! Rio*Hondo*College* * * EXAMPLE*EXAM*1*! Chemistry*120* * Name: EXAMPLE*EXAM*1* Exam)#1 100)points) Directions:)Answereachquestionbelowtothebestofyourability.Showallworkwherecalculations arerequired.aninformationsheetwithaperiodictableisattachedtothebackoftheexam;youmay

More information

Families on the Periodic Table

Families on the Periodic Table Families on the Periodic Table Elements on the periodic table can be grouped into families based on their chemical properties. Each family has a specific name to differentiate it from the other families

More information

NEW EQUIPMENT PRICE LIST 2017

NEW EQUIPMENT PRICE LIST 2017 VERSION 8 NEW EQUIPMENT LIST 2017 SPEEDRACK PALLET RACKING QUICKSPAN HEAVY DUTY LONGSPAN SUPER STRONG 400 STEEL SHELVING OFFICIALLY THE UK S LARGEST STOCKHOLDER OF Contents Super-Strong 400 Shelving 03

More information

In order to analyse adsorbed proteins from the surface of TCPS plates it was

In order to analyse adsorbed proteins from the surface of TCPS plates it was Electronic Supplementary Material (ESI) for Biomaterials Science. This journal is The Royal Society of Chemistry 2016 1. Proteomics Figure 1 In order to analyse adsorbed proteins from the surface of TCPS

More information

I International Bureau (10) International Publication Number (43) International Publication Date 6 December 2012 ( )

I International Bureau (10) International Publication Number (43) International Publication Date 6 December 2012 ( ) (12) INTERNATIONAL APPLICATION PUBLISHED UNDER THE PATENT COOPERATION TREATY (PCT) (19) World Intellectual Property Organization I International Bureau (10) International Publication Number (43) International

More information

APPENDIX D. MATERIAL TEST RESULTS

APPENDIX D. MATERIAL TEST RESULTS APPENDIX D. MATERIAL TEST RESULTS Tensile coupon testing was used to characterize the steel plate used to make the five connection members, gusset plates, and splice plates. Testing was performed according

More information

p-rich beams for SPES-α

p-rich beams for SPES-α p-rich beams for SPES-α LNL-INFN The SPES TIS complex ion source 1+ transfer line proton beam SPES production target The Target: ready for irradiation ITarget= 700A -> 1200A max ILine= 200A -> 600A max

More information

Attachment J-1: Government Site Hourly Rates - CIO-SP3 SB (Restricted)

Attachment J-1: Government Site Hourly Rates - CIO-SP3 SB (Restricted) Government Site Hourly Rates CIOSP3 SB (Small Business Category) : July 15, 2012 July 14, 2022 Attachment J1: Government Site Hourly Rates CIOSP3 SB (Restricted) 0002 AA01 Administrative Assistant Level

More information

!"#$%&'()!*"+,-).!!/0#'1(2'01!3"'&"4051)6!7('&

!#$%&'()!*+,-).!!/0#'1(2'01!3'&4051)6!7('& !!!!""#$%&'("!)*+! Escalation rate 3% 3% 3% 3% 3% 3% 3% 3% 3% 0001 AA01 Administrative Assistant Level I HR $43.34 $44.64 $45.98 $47.36 $48.78 $50.24 $51.75 $53.30 $54.90 $56.55 0001 AA02 Administrative

More information

Chief Information Officer - Solutions and Partners (CIO-SP3) (Unrestricted) Request for Proposal (RFP) NIHJT ACS Federal Solutions LLC

Chief Information Officer - Solutions and Partners (CIO-SP3) (Unrestricted) Request for Proposal (RFP) NIHJT ACS Federal Solutions LLC 0001 AA01 Administrative Assistant Level I HR $35.41 $36.33 $37.28 $38.24 $39.24 $40.26 $41.31 $42.38 $43.48 $44.61 0001 AA02 Administrative Assistant Level II HR $45.42 $46.60 $47.81 $49.06 $50.33 $51.64

More information

UK Baseline Geochemistry: A Key Environmental Yardstick

UK Baseline Geochemistry: A Key Environmental Yardstick UK Baseline Geochemistry: A Key Environmental Yardstick Geochemical Baselines and Medical Geology Team Content Geochemical baselines G-BASE project Applications how the data have been used and what can

More information

VARIQ CV JV, LLC Contractor Site Hourly Rate. Page 1 of. Contract Year ITEM DESCRIPTION U/M

VARIQ CV JV, LLC Contractor Site Hourly Rate. Page 1 of. Contract Year ITEM DESCRIPTION U/M Escalation rate 2.5% 2.5% 2.5% 2.5% 2.5% 0001 AA01 Administrative Assistant Level I HR $46.72 $47.89 $49.09 $50.31 $51.57 $52.86 0001 AA02 Administrative Assistant Level II HR $63.71 $65.30 $66.94 $68.61

More information

VARIQ CV JV, LLC Government Site Hourly Rate. Page 1 of 5. Contract Year ITEM DESCRIPTION U/M

VARIQ CV JV, LLC Government Site Hourly Rate. Page 1 of 5. Contract Year ITEM DESCRIPTION U/M Escalation rate 2.5% 2.5% 2.5% 2.5% 2.5% 0002 AA01 Administrative Assistant Level I HR $41.71 $42.75 $43.82 $44.92 $46.04 $47.19 0002 AA02 Administrative Assistant Level II HR $56.88 $58.30 $59.76 $61.25

More information

Synectics CIOSP3 Small Business Hourly Rates (Government Site)

Synectics CIOSP3 Small Business Hourly Rates (Government Site) ITEM DESCRIPTION U/M Escalation rate 3% 3% 3% 3% 3% 3% 3% 3% 3% 0002 AA01 Administrative Assistant Level I HR $57.83 $59.56 $61.35 $63.19 $65.09 $67.04 $69.05 $71.12 $73.26 $75.46 0002 AA02 Administrative

More information

Sectoral patterns of technical change: Towards a taxonomy and a theory

Sectoral patterns of technical change: Towards a taxonomy and a theory Sectoral patterns of technical change: Towards a taxonomy and a theory 기술경영협동과정 박사 4학기 유광용/ 김동희 Contents Keith PAVITT, Research Policy 13 (1984) 343-373 Chapter 1 Summary Chapter 2 Critiques Chapter 3

More information

Strategic Operational Solutions Inc. Contractor Site-Hourly Rate Page 1 of 10

Strategic Operational Solutions Inc. Contractor Site-Hourly Rate Page 1 of 10 Escalation rate 2.5% 2.5% 2.5% 2.5% 2.5% 0001 AA01 Administrative Assistant Level I HR $34.14 $35.00 $35.87 $36.77 $37.69 $38.63 0001 AA02 Administrative Assistant Level II HR $43.63 $44.72 $45.84 $46.98

More information

RELI GROUP, INC. Contractor Site Hourly Rate Page 1 of 10

RELI GROUP, INC. Contractor Site Hourly Rate Page 1 of 10 Escalation rate 2% 2% 2% 2% 2% 0001 AA01 Administrative Assistant Level I HR $42.85 $43.71 $44.58 $45.47 $46.38 $47.31 0001 AA02 Administrative Assistant Level II HR $53.06 $54.12 $55.20 $56.31 $57.43

More information

DirectViz Solutions LLC Contractor Site-Hourly Rate Page 1 of 10

DirectViz Solutions LLC Contractor Site-Hourly Rate Page 1 of 10 Escalation rate 2% 2% 2% 2% 2% 0001 AA01 Administrative Assistant Level I HR $38.69 $39.46 $40.25 $41.06 $41.88 $42.72 0001 AA02 Administrative Assistant Level II HR $53.42 $54.49 $55.58 $56.69 $57.82

More information

DV United Labor Categories and Rates - Government Site

DV United Labor Categories and Rates - Government Site DV United Labor Categories and Rates - Government Site Escalation rate 2.4% 2.4% 2.4% 2.4% 2.4% 2.4% 2.4% 2.4% 2.4% 0002 AA01 Administrative Assistant Level I HR $30.47 $31.20 $31.95 $32.72 $33.50 $34.31

More information

CLOUD NINE TECHNOLOGIES INC Government Site Hourly Rate Page 6 of 10

CLOUD NINE TECHNOLOGIES INC Government Site Hourly Rate Page 6 of 10 Escalation rate 3% 3% 3% 3% 3% 0002 AA01 Administrative Assistant Level I HR $40.63 $41.84 $43.10 $44.39 $45.72 $47.10 0002 AA02 Administrative Assistant Level II HR $47.13 $48.54 $49.99 $51.49 $53.04

More information

ALL POINTS LOGISTICS, LLC Government Site Hourly Rate Page 6 of 10

ALL POINTS LOGISTICS, LLC Government Site Hourly Rate Page 6 of 10 Escalation rate 2% 2% 2% 2% 2% 0002 AA01 Administrative Assistant Level I HR $43.52 $44.39 $45.28 $46.18 $47.11 $48.05 0002 AA02 Administrative Assistant Level II HR $50.42 $51.43 $52.46 $53.51 $54.58

More information

ENLIGHTENED, INC. Contractor Site Hourly Rate Page 1 of 10

ENLIGHTENED, INC. Contractor Site Hourly Rate Page 1 of 10 Escalation rate 3% 3% 3% 3% 3% 0001 AA01 Administrative Assistant Level I HR $49.45 $50.93 $52.46 $54.04 $55.66 $57.33 0001 AA02 Administrative Assistant Level II HR $58.56 $60.32 $62.13 $63.99 $65.91

More information

AMAR Health IT LLC_J 1 Government Site Hourly Rate Page 6 of 10

AMAR Health IT LLC_J 1 Government Site Hourly Rate Page 6 of 10 Escalation rate 2.90% 2.90% 2.90% 2.90% 2.90% 2.90% 2.90% 2.90% 2.90% 0002 AA01 Administrative Assistant Level I HR $37.95 $39.05 $40.18 $41.35 $42.55 $43.78 $45.05 $46.36 $47.70 $49.09 0002 AA02 Administrative

More information

CLOUD NINE TECHNOLOGIES INC Contractor Site Hourly Rate Page 1 of 10

CLOUD NINE TECHNOLOGIES INC Contractor Site Hourly Rate Page 1 of 10 Escalation rate 3% 3% 3% 3% 3% 0001 AA01 Administrative Assistant Level I HR $43.27 $44.57 $45.90 $47.28 $48.70 $50.16 0001 AA02 Administrative Assistant Level II HR $50.19 $51.70 $53.25 $54.85 $56.49

More information

ALL POINTS LOGISTICS, LLC Contractor Site Hourly Rate Page 1 of 10

ALL POINTS LOGISTICS, LLC Contractor Site Hourly Rate Page 1 of 10 Escalation rate 2% 2% 2% 2% 2% 0001 AA01 Administrative Assistant Level I HR $45.70 $46.61 $47.54 $48.49 $49.46 $50.45 0001 AA02 Administrative Assistant Level II HR $52.94 $54.00 $55.08 $56.18 $57.31

More information

AMAR Health IT LLC_J 1 Contractor Site Hourly Rate Page 1 of 10

AMAR Health IT LLC_J 1 Contractor Site Hourly Rate Page 1 of 10 Escalation rate 2.90% 2.90% 2.90% 2.90% 2.90% 2.90% 2.90% 2.90% 2.90% 0001 AA01 Administrative Assistant Level I HR $40.69 $41.87 $43.08 $44.33 $45.62 $46.94 $48.30 $49.70 $51.15 $52.63 0001 AA02 Administrative

More information

RIGHTDIRECTION TECHNOLOGY SOLUTIONS, LLC - Contractor Site-Hourly Rate Page 1 of 10

RIGHTDIRECTION TECHNOLOGY SOLUTIONS, LLC - Contractor Site-Hourly Rate Page 1 of 10 Escalation rate 2.50% 2.50% 2.50% 2.50% 2.50% 0001 AA01 Administrative Assistant Level I HR $46.03 $47.18 $48.36 $49.56 $50.80 $52.07 0001 AA02 Administrative Assistant Level II HR $53.90 $55.25 $56.63

More information

The Criticality of Materials

The Criticality of Materials Center for Industrial Ecology Yale School of Forestry & Environmental Studies The Criticality of Materials Thomas E. Graedel Yale University Metal Linkages in the New Mineralogy +4 Elements +45 Elements

More information

Synectics CIOSP3 Small Business Hourly Rates (Contractor Site)

Synectics CIOSP3 Small Business Hourly Rates (Contractor Site) Synectics CIOSP3 Small Business Hourly Rates (Contractor Site) ITEM DESCRIPTION U/M Escalation rate 3% 3% 3% 3% 3% 3% 3% 3% 3% 0002 AA01 Administrative Assistant Level I HR $57.83 $59.56 $61.35 $63.19

More information

Where do we start? ocreate the Universe oform the Earth and elements omove the elements into their correct positions obuild the atmosphere and oceans

Where do we start? ocreate the Universe oform the Earth and elements omove the elements into their correct positions obuild the atmosphere and oceans Where do we start? ocreate the Universe oform the Earth and elements omove the elements into their correct positions obuild the atmosphere and oceans 1 The BIG BANG The Universe was created 13.8 billion

More information

Evidence of Performance regarding the requirements for float glass according to EN 572

Evidence of Performance regarding the requirements for float glass according to EN 572 Evidence of Performance regarding the requirements for float glass according to EN 572 Test Report 605 32401 Client Noval Glass Industrial Group (China) Co., Ltd. Noval Glass Industiral Zone Qingdao, 523965

More information

Bench-Scale Testing for Controlling Desalinated Seawater Quality

Bench-Scale Testing for Controlling Desalinated Seawater Quality Bench-Scale Testing for Controlling Desalinated Seawater Quality Tai J. Tseng, Robert C. Cheng, Cynthia Andrews-Tate, and Kevin Wattier Long Beach Water Department November 17, 2008 2008 WQTC, Cincinnati,

More information

Contractor Site Hourly Rates

Contractor Site Hourly Rates Contractor Site Hourly Rates Escalation rate 2.5% 2.5% 2.5% 2.5% 2.5% 2.5% 2.5% 2.5% 2.5% 0001 AA01 Administrative Assistant Level I HR $43.83 $44.93 $46.05 $47.20 $48.38 $49.59 $50.83 $52.10 $53.40 $54.74

More information

WWW.SAMSUNGPJS.CO.KR SAMSUNG Pipe Joint System, is a manufacturing company, specialized in metal stamping, form rolling and pipe extrusion. With more than 20 years of manufactring experience, we are able

More information

Trade marketing Eyezen look book

Trade marketing Eyezen look book Trade marketing Eyezen look book Key visuals Press advertising - portrait watch post play scroll Press advertising - landscape Point-of-sale Various POS available; A1 and A2 posters, cubes and leaflets.

More information

Chem. 451 (Spring, 2003) Final Exam (100 pts)

Chem. 451 (Spring, 2003) Final Exam (100 pts) Chem. 451 (Spring, 2003) Final Exam (100 pts) Name: --------------------------------------------------------, SSN: --------------------------------, May 15, 2003 LAST, First Circle the alphabet segment

More information

Evaporation MATERIALS I 01

Evaporation MATERIALS I 01 MATERALS Evaporation Sources Evaporation Source Selection Guide... 02 Tungsten Filaments for Vacuum Metalizing... 04 Tungsten Rod Source... 07 Point Source Loop Filaments... 08 Heater Filaments... 10 Baskets...

More information

State-of-the-art Flame Synthesis of Nanoparticles

State-of-the-art Flame Synthesis of Nanoparticles Verbrennung und chemisch reaktive Prozesse in der Energie- und Materialtechnik State-of-the-art Flame Synthesis of Nanoparticles Dr. Frank Ernst ernst@ptl.mavt.ethz.ch 200 nm Particle Technology Laboratory,

More information

EIP RAW MATERIALS ANNUAL CONFERENCE Janez Potočnik Co-Chair International Resource Panel - UNEP Brussels, January 13 th, 2015

EIP RAW MATERIALS ANNUAL CONFERENCE Janez Potočnik Co-Chair International Resource Panel - UNEP Brussels, January 13 th, 2015 EIP RAW MATERIALS ANNUAL CONFERENCE Janez Potočnik Co-Chair International Resource Panel - UNEP Brussels, January 13 th, 2015 POPULATION GROWTH PER CAPITA CONSUMPTION GROWTH THE DOUBLING STORY LIMITED

More information

CLASS TEST GRADE 11. PHYSICAL SCIENCES: CHEMISTRY Test 7: Chemical systems

CLASS TEST GRADE 11. PHYSICAL SCIENCES: CHEMISTRY Test 7: Chemical systems CLASS TEST GRADE PHYSICAL SCIENCES: CHEMISTRY Test 7: Chemical systems MARKS: 45 TIME: hour INSTRUCTIONS AND INFORMATION. Answer ALL the questions. 2. You may use non-programmable calculators. 3. You may

More information

Part 1. Preparation and Color of Solutions. Experiment 1 (2 session lab) Electrons and Solution Color. Pre-lab Report, page 29

Part 1. Preparation and Color of Solutions. Experiment 1 (2 session lab) Electrons and Solution Color. Pre-lab Report, page 29 Experiment 1 (2 session lab) Electrons and Solution Color Pre-lab Report, page 29 Session 1 One hour discussion (E2) Two hour lab (E1) Aim to complete Parts 1, 2, and 3 of E1. Part 1. Preparation and Color

More information

Environment Canada s Metals Assessment Activities

Environment Canada s Metals Assessment Activities Environment Canada s Metals Assessment Activities Joël Gauthier Environment Canada OECD Workshop on Metals Specificities in Environmental Risk Assessment September 7-8 2011, Paris Assessing substances

More information

Marketing II Standards, Competencies, & Evidence of Mastery

Marketing II Standards, Competencies, & Evidence of Mastery Marketing II Standards, Competencies, & Evidence of Mastery This document accompanies the Missouri Marketing II Instructional Framework and lists the standards and competencies from the MBA Research Standards

More information

Chem : Feb.12-17

Chem : Feb.12-17 Chem. 25-26: Feb.2-7 Preparation Pre-lab Report (p.90) for E3 completed Discussion Presentation for E2 completed Pre-lab reading and studies for E3 completed Lab Agenda One hour discussion of E 2(Questions,

More information

Chem : Oct. 1 - Oct. 7

Chem : Oct. 1 - Oct. 7 Chem. 125-126: Oct. 1 - Oct. 7 Preparation Pre-lab Report (p.90) for E3 completed Discussion Presentation for E2 completed Pre-lab reading and studies for E3 completed Agenda One hour discussion of E2(Questions,

More information

National Plant Diagnostic Network

National Plant Diagnostic Network National Plant Diagnostic Network Kitty Cardwell, PhD National Program Leader USDA Cooperative State Research Education & Extension Service 1 st NPDN National Meeting A RECORD OF ACCOMPLISHMENT Orlando,

More information

Groups of Elements 3B 5B 6B 7B 2 C. 10 Na. 36 Rb. 54 Cs. 86 Fr. 57 Ac. 71 Th. Nitrogen group. Alkali metals. Alkaline earth metals.

Groups of Elements 3B 5B 6B 7B 2 C. 10 Na. 36 Rb. 54 Cs. 86 Fr. 57 Ac. 71 Th. Nitrogen group. Alkali metals. Alkaline earth metals. Groups of Elements * * Li He C N O 8 F 9 Ne 0 B Be H Al Si P S Cl Ar 8 K 9 Ca 0 Sc Ti V Cr Mn Fe Co Ni 8 Cu 9 Zn 0 Ga Ge As Se Br Kr Rb Sr 8 Y 9 Zr 0 Nb Mo Tc Ru Rh Pd Ag Cd 8 In 9 Sn 0 Sb Te I Xe Cs Ba

More information

Lanthanide metals as shark repellants

Lanthanide metals as shark repellants Lanthanide metals as shark repellants Stephen M. Kajiura 1 & John W. Mandelman 2 1 Biological Sciences, Florida Atlantic University 2 Edgerton Research Laboratory, New England Aquarium Longline bycatch

More information

Lecture Document for Metal Analysis (by the JICA Expert Team) Theoretical Training for AAS

Lecture Document for Metal Analysis (by the JICA Expert Team) Theoretical Training for AAS 31 3 1 32 1000/1 1000000/1 100000/1 01 31 01 ppm 1000 ppm 20 15 10 05 20 ppm ppm 05 10 05 31 4 2 1 41 1 41 1 2 41 42 2 41 x 100 42 30 20 10 0 ppm 100 Mg 10 ppm 10 Mg 100 03+x 02+x 01+x x x ppm 2 42 10

More information

AcO O OH 4''' 3''' 1''' 5''' 2'''

AcO O OH 4''' 3''' 1''' 5''' 2''' a b 6' 7' 6'' 7'' O 5' 8' 5'' 4' 9' NH 3' 4'' 3'' 2'' 1'' 2' OH O 1' 5''' O AcO O OH 19 10 9 18 11 16 12 8 7 6 15 17 3 5 4 13 14 4''' 6''' 1 2 20 O H HO O OAc 3''' 7''' 2''' 1''' O c Supplementary Figure

More information

METAL RECOVERY WITH CH COLLECTOR SOLUTION

METAL RECOVERY WITH CH COLLECTOR SOLUTION METAL RECOVERY WITH CH COLLECTOR SOLUTION CH COLLECTOR SOLUTIONS UNIQUE METAL RECOVERY FROM WATERS, HIGHLY SELECTIVE ON: Basic metals; Antimony, Copper, Lead, Mercury, Nickel and Zinc Rare Earth Elements

More information

862 Pull Loop System

862 Pull Loop System NEXTEER Supplier Information Packet 862 Pull Loop System Revised Date: March, 2010 Supplier Pull Loop System TABLE OF CONTENTS Page I. Introduction... 1 II. System Flow... 2 III. Bar Code Label Requirements

More information

Precursors with Metal-Nitrogen Bonds for ALD of Metals, Nitrides and Oxides

Precursors with Metal-Nitrogen Bonds for ALD of Metals, Nitrides and Oxides Precursors with Metal-Nitrogen Bonds for ALD of Metals, Nitrides and Oxides Abstract Roy Gordon Gordon@chemistry.harvard.edu, Cambridge, MA To achieve ALD s unique characteristics, ALD precursors must

More information

FedEx Express. Effective Jan. 1, Rates

FedEx Express. Effective Jan. 1, Rates FedEx Express Effective Jan. 1, 2007 Rates Table of Contents FedEx Express Intra-Canada Rates 2 Postal Code Index 3 FedEx First Overnight 4 FedEx Intra-Canada Index 12 FedEx Priority Overnight 14 FedEx

More information

Our next questions are about Matrix Model. MM01. Are you familiar with Matrix Model? 1 yes [GO TO QUESTION MM01_1a] 0 no [GO TO QUESTION MEDC01]

Our next questions are about Matrix Model. MM01. Are you familiar with Matrix Model? 1 yes [GO TO QUESTION MM01_1a] 0 no [GO TO QUESTION MEDC01] II.B.05.01 01 Our next questions are about Matrix Model. The National Registry of Evidence-Based Practices and Programs (NREPP) describes Matrix Model as follows: The Matrix Model is an intensive outpatient

More information

Section 9. Fittings - Malleable Iron Pipe in this section... Elbow Equal - 90 Female 330. Elbow Reducing - 90 Female 330. Elbow - 90 Male/Female 330

Section 9. Fittings - Malleable Iron Pipe in this section... Elbow Equal - 90 Female 330. Elbow Reducing - 90 Female 330. Elbow - 90 Male/Female 330 Section 9 Fittings - Malleable Iron Pipe in this section... Elbow Equal - 90 Female 330 Elbow Reducing - 90 Female 330 Elbow - 90 Male/Female 330 Tee Equal Female 330 Tee Reducing Branch Female 331 Cross

More information

Qualification Reference: AA/ Cage Code: MIL-C Cables NEMA WC27500 Part Number Builder

Qualification Reference: AA/ Cage Code: MIL-C Cables NEMA WC27500 Part Number Builder Qualification Reference: 15404201.AA/1-20-2015 Cage Code: 67050 MIL-C-27500 Cables NEMA WC27500 Part Number Builder MIL-C-27500 Cables NEMA WC 27500 Part Number Builder MIL-C-27500 (M27500 Cable) MIL Spec

More information

SECTIOn 4. Claritas PPT Multi-Element Standards for ICP-MS

SECTIOn 4. Claritas PPT Multi-Element Standards for ICP-MS SECTIOn 4 Claritas PPT Multi-Element Standards for ICP-MS Your Science is Our Passion. Claritas PPT Multi-Element Standards for ICP-MS The great precision, sensitivity, and rapid analysis of multi-element

More information

Lower Cost Higher Performance Graphite for LIBs. Prepared by: Dr. Edward R. Buiel President and CEO Coulometrics, LLC. Date: March 23, 2017

Lower Cost Higher Performance Graphite for LIBs. Prepared by: Dr. Edward R. Buiel President and CEO Coulometrics, LLC. Date: March 23, 2017 Lower Cost Higher Performance Graphite for LIBs Prepared by: Dr. Edward R. Buiel President and CEO Coulometrics, LLC. Date: March 23, 2017 Outline Company overview Review of natural graphite resources

More information

8. Relax and do well.

8. Relax and do well. EM 1515.001 Exam III John III. Gelder November 7, 2001 Name TA's Name Lab Section INSTRUTIONS: 1. This examination consists of a total of 9 different pages. The last three pages include a periodic table,

More information

E3 Redox: Transferring electrons. Session one of two First hour: Discussion (E1) 2nd and 3rd hour: Lab (E3, Parts 1 and 2A)

E3 Redox: Transferring electrons. Session one of two First hour: Discussion (E1) 2nd and 3rd hour: Lab (E3, Parts 1 and 2A) E3 Redox: Transferring electrons Session one of two First hour: Discussion (E) 2nd and 3rd hour: Lab (E3, Parts and 2A) Oxidation-Reduction (Redox) Reactions involve electron transfer. Change in charge

More information

Certificate of Analysis Work Order : LK [Report File No.: ]

Certificate of Analysis Work Order : LK [Report File No.: ] Certificate of Analysis Work Order : LK40078 [] To: Mike Koziol COD SGS MINERALS Unit 7 3C Kelly Lake Road Sudbury ON P3E P Date: Dec 3, 204 P.O. No. Project No. No. Of Samples Date Submitted Report Comprises

More information

FedEx Express Rates. Effective Jan. 4, 2010

FedEx Express Rates. Effective Jan. 4, 2010 FedEx Express Rates Effective Jan. 4, 2010 Table of Contents FedEx Express Intra-Canada Rates 2 Postal Code Index 3 Intra-Canada Index 4 FedEx First Overnight 6 FedEx Priority Overnight 12 FedEx 2Day 18

More information

SUMMARY OF ASBESTOS LOCATIONS HAMILTON HEALTH SCIENCES, MCMASTER SITE

SUMMARY OF ASBESTOS LOCATIONS HAMILTON HEALTH SCIENCES, MCMASTER SITE Page 1 of 19 SUMMARY OF ASBESTOS LOCATIONS HAMILTON HEALTH SCIENCES, MCMASTER SITE Material For Full Asbestos Management Program Document See Engineering Supervisor or Project Manager Revised 09 March

More information

Freight containers Coding, identification and marking Amendment 3

Freight containers Coding, identification and marking Amendment 3 Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 6346 Third edition 1995-12-01 AMENDMENT 3 2012-12-01 Freight containers Coding, identification and marking Amendment 3 Conteneurs pour le transport

More information

ACTEW Water. Work Instruction - Treatment Valves and Piping Systems Identification

ACTEW Water. Work Instruction - Treatment Valves and Piping Systems Identification 1. Introduction To define the procedures necessary to identify piping systems and valves and to record in the Maintenance System. This procedure applies to all piping, and valves installed at Treatment

More information

Fresh Food Access Plan

Fresh Food Access Plan Fresh Food Access Plan Vision Statement: The Lehigh Valley is committed to a healthy, sustainable local food system that recognizes and strengthens the interdependent relationships between individual food

More information

COMMERCIAL PROPERTY FRANCHISEPROSPECTUS. Looking for a great Professional Services Franchise? LOOK NO FURTHER!

COMMERCIAL PROPERTY FRANCHISEPROSPECTUS. Looking for a great Professional Services Franchise? LOOK NO FURTHER! COMMERCIAL PROPERTY FRANCHISEPROSPECTUS Looking for a great Professional Services Franchise? LOOK NO FURTHER! 2 www.exeidfranchise.com Stand out from the crowd with Exeid Commercial Property 3 A Little

More information

Noblehurst Dairy Linwood, NY

Noblehurst Dairy Linwood, NY Data Integrator Initial Data Summary Site Description This site is a dairy farm located in the Central New York town of Linwood. A 13 kw Caterpillar engine generator uses digester gas to produce electricity

More information

Certificate of Analysis

Certificate of Analysis Brammer Standard Company, Inc. Certificate of Analysis BS 625A Certified Reference Material for Inconel 625 - UNS Number N06625 1 Certified Estimate of Certified Estimate of 2 3 2 Value Uncertainty Value

More information

The contemporary Nickel Cycle

The contemporary Nickel Cycle Center for Industrial Ecology Yale School of Forestry & Environmental Studies The contemporary Nickel Cycle (selection only) Barbara Reck April 24, 2006 Note The slides shown hereafter only include a selection

More information

08/09 Series 5 x 8 Solid PLUS

08/09 Series 5 x 8 Solid PLUS 3(6) 3.000 3.563(2) 3(3) 3(3) 08/09 Series 5 x 8 Solid PLUS included at no extra charge B1 1.969(4) 1(4) 1.219(4) Core Plan View Cavity Plan View Pry Slots.510 I.D..510 ½x2½ Snap Ring.375 Return Pin 3.870

More information

4-1 CITY CENTRE WEST COMMUNITY IMPROVEMENT PLAN

4-1 CITY CENTRE WEST COMMUNITY IMPROVEMENT PLAN SCHEDULE 4 URBAN VILLAGE DEVELOPMENT PROPOSAL EVALUATION The City Centre West Community Improvement Plan clearly specifies that all contemplated development incentives shall be performance-based incentives,

More information

New Jersey Department of Transportation DATE : 05/15/08 PAGE : TABULATION OF BIDS CALL ORDER : 120 CONTRACT ID : COUNTIES : ESSEX LETTING

New Jersey Department of Transportation DATE : 05/15/08 PAGE : TABULATION OF BIDS CALL ORDER : 120 CONTRACT ID : COUNTIES : ESSEX LETTING New Jersey Department of Transportation DATE : 05/15/08 PAGE : 120-1 CONTRACT TIME : 01/11/09 COMPLETION DATE CONTRACT DESCRIPTION : URBAN PROJECT(S) : STATE HAYNES AVENUE BRIDGE OVER AMTRAK /NORTHEAST

More information

Advanced Energy Storage and the Importance of Graphite Anode Materials

Advanced Energy Storage and the Importance of Graphite Anode Materials Advanced Energy Storage and the Importance of Graphite Anode Materials Dr. John C. Burns CEO Novonix, Canada Dr. Edward R. Buiel CEO PUREgraphite, USA July 19, 2017 1 Overview LIB Raw Materials + How much

More information

Li Mass = 7 amu Melting point C Density 0.53 g/cm 3 Color: silvery

Li Mass = 7 amu Melting point C Density 0.53 g/cm 3 Color: silvery Blackline Master B02: Mendeleev s Element Cards H Mass = 1 amu Melting point -259 0 C Density 0.0909 g/cm 3 Color: colorless Li Mass = 7 amu Melting point 180.5 0 C Density 0.53 g/cm 3 Be Mass = 9 amu

More information

Assaying and Analysis Choices in Practice

Assaying and Analysis Choices in Practice Assaying and Analysis Choices in Practice Au assays at the GDL laboratories Dirk Hofmans Umicore UPMR Hoboken, Belgium March 2015 Agenda LBMA Good delivery rules for laboratories How to assay > 995 Gold?

More information

Sum Oil, Gas, Coal, & Cement A B C D E F G H I J K L M N O P Q R S T

Sum Oil, Gas, Coal, & Cement A B C D E F G H I J K L M N O P Q R S T 0 0 0 0 A B C D E F G H I J K L M N O P Q R S T Oil & NGL Annual and cumulative Carbon Majors (MtCO) Annual and cumulative Carbon Majors (MtC) Annual and cumulative global oil emissions (MtCO) Annual and

More information

The Mobilization of Materials by Human and Natural Activities. 2.83/2.813 T. G. Gutowski

The Mobilization of Materials by Human and Natural Activities. 2.83/2.813 T. G. Gutowski The Mobilization of Materials by Human and Natural Activities 2.83/2.813 T. G. Gutowski Reading Assignments for Next Tuesday February 19th 2/19 Sustainability? a) Diamond, J., Easter Island s End Discover

More information

AAMA THERMAL PERFORMANCE TEST REPORT. Rendered to: UNITED STATES ALUMINUM. SERIES/MODEL: 2200 Glazed Wall System

AAMA THERMAL PERFORMANCE TEST REPORT. Rendered to: UNITED STATES ALUMINUM. SERIES/MODEL: 2200 Glazed Wall System AAMA 1503-98 THERMAL PERFORMANCE TEST REPORT Rendered to: UNITED STATES ALUMINUM SERIES/MODEL: 2200 Glazed Wall System TYPE: Glazed Wall Systems (Site-built) Summary of Results Thermal Transmittance (U-Factor)

More information

Recovery of Rare Earth Elements (REEs) from Coal Mine Drainage

Recovery of Rare Earth Elements (REEs) from Coal Mine Drainage Recovery of Rare Earth Elements (REEs) from Coal Mine Drainage Paul Ziemkiewicz, Water Research Inst. Xingbo Liu, Mechanical Engineering Dept. West Virginia University Aaron Noble, Mining Engineering Dept.

More information

A great deal on Hertel durable carbide turning inserts.

A great deal on Hertel durable carbide turning inserts. A great deal on durable carbide turning inserts. Benefits: carbide inserts are made to withstand challenging steel cutting applications, removing material fast and outlasting other, premier brands. Carbide

More information

Tailor-made Polyhedral Oligomeric Silsesquioxane (POSS) Molecules for Thermosets

Tailor-made Polyhedral Oligomeric Silsesquioxane (POSS) Molecules for Thermosets Tailor-made Polyhedral Oligomeric Silsesquioxane (POSS) Molecules for Thermosets Bruce X. Fu, Chris DeArmitt, Joe Schwab September, 2008 Hybrid Plastics, Inc. Hybrid Plastics (Hattiesburg, MS) Current

More information

Te Mātauranga Matū, Kaupae 1, 2018

Te Mātauranga Matū, Kaupae 1, 2018 L1 CHEMMR 991108 1 Te Mātauranga Matū, Kaupae 1, 2018 2.00 i te ahiahi Rāpare 15 Whiringa-ā-rangi 2018 PUKAPUKA RAUEMI Tirohia tēnei pukapuka hei whakatutuki i ngā tūmahi o ō Pukapuka Tūmahi, Tuhinga hoki.

More information

The Mobilization of Materials by Human and Natural Activities. 2.83/2.813 T. G. Gutowski

The Mobilization of Materials by Human and Natural Activities. 2.83/2.813 T. G. Gutowski The Mobilization of Materials by Human and Natural Activities 2.83/2.813 T. G. Gutowski Outline 1. Wackernagel s results: carbon cycle 2. Other cycles: rock, water, nitrogen, sulfur, phosphorus 3. Klee

More information

Kingspan Steel Building Solutions Kingframe Infinity Tips, Tricks & Explanations

Kingspan Steel Building Solutions Kingframe Infinity Tips, Tricks & Explanations Kingspan Steel Building Solutions Kingframe Infinity Tips, Tricks & Explanations V2-201 For Technical Help, please contact: infinityprojects@kingspan.com or 0121 753 7050 Kingframe Infinity Tips, Tricks

More information

Determination of trace and ultratrace elements by ICP-SFMS

Determination of trace and ultratrace elements by ICP-SFMS Determination of trace and ultratrace elements by ICP-SFMS Ilia Rodushkin, Emma Engström, Douglas Baxter ALS Scandinavia AB Luleå University of Technology 1 Luleå laboratory Part of ALS group (>300 laboratories

More information

Chem : Feb E3 Redox: Transferring Electrons. E3: Redox: Transferring Electrons

Chem : Feb E3 Redox: Transferring Electrons. E3: Redox: Transferring Electrons Chem. 5-6: Feb. - 7 Preparation Pre-lab Report (p.90) for E3 completed Discussion Presentation for E completed Pre-lab reading and studies for E3 completed Lab enda One hour discussion of E (Questions,

More information

Complete programme. The retaining system for high pressure hoses. including extracts from regulations

Complete programme. The retaining system for high pressure hoses. including extracts from regulations Complete programme including extracts from regulations These retaining systems protect man and machine from the dangerous whipping effect in case that the hose tears apart. Extracts from specifications

More information

Summary of Geochemical Atlas Information

Summary of Geochemical Atlas Information G-BASE Internet Information Summary of Geochemical Atlas Information Version 1.1 31 st March 2006 atlassummaries.pdf Page 1 of 17 Summary Atlas Information 8. Argyll 17. East Anglia 7. East Grampians 16.

More information

Dr Nick Voulvoulis. Presentation at the Industrial Waste & Wastewater Treatment & Valorisation conference May 2015, Athens, Greece

Dr Nick Voulvoulis. Presentation at the Industrial Waste & Wastewater Treatment & Valorisation conference May 2015, Athens, Greece Centre for Environmental Policy Environmental Quality Research Mining in the context of sustainable management of natural capital: the importance of waste recycling and reuse Presentation at the Industrial

More information

Cozo College. BOYS' Secondary victoria Cozo, Malta 'Ninu Cremona' Half Yearly Examination ANSWER ALL QUESTIONS

Cozo College. BOYS' Secondary victoria Cozo, Malta 'Ninu Cremona' Half Yearly Examination ANSWER ALL QUESTIONS Cozo College BOYS' Secondary victoria Cozo, Malta 'Ninu Cremona' ooo Half Yearly Examination 2011-2012 Form 4 J.L. Chemistry Time: 1'/z Hours Name: Class: Useful Data: Q=It Faraday Constant = 96500 C SECTION

More information

Info Bulletin Laboratory Chemicals, Molecular Biology Culture Media for Microbiology

Info Bulletin Laboratory Chemicals, Molecular Biology Culture Media for Microbiology Info Bulletin September 26th 2014 NEW FAMILY OF SCHARLAU ICP STANDARDS Scharlau is glad to announce the introduction of the new family of ICP standards. From now, this range of products replaces the current

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 WESTMORELAND MECHANICAL TESTING & RESEARCH, INC. 221 Westmoreland Drive Youngstown, PA 15696 Michael Self Phone: 724 537 3131 E-mail: mself@wmtr.com CHEMICAL

More information

Certificate of Analysis

Certificate of Analysis Brammer Standard Company, Inc. Certificate of Analysis BS 800 Certified Reference Material for Incoloy 800 - UNS Number N08800 1 Certified Estimate of Certified Estimate of 2 3 2 Value Uncertainty Value

More information

RIBF RI-beam (SLOWRI)

RIBF RI-beam (SLOWRI) RIBF RI-beam (SLOWRI) RIBF - RI Beam Factory - RIBF Experiment Building 20 years old facility Existing Facility prototype SLOWRI RIPS SRC Superconducting ring cyclotron SLOWRI (Universal SLOW RI-beam facility)

More information

Sho-Rate TM "50" Model 1350E and Sho-Rate TM "150" Model 1355E

Sho-Rate TM 50 Model 1350E and Sho-Rate TM 150 Model 1355E Data Sheet Sho-Rate TM "50" Model 1350E and Sho-Rate TM "150" Model 1355E Ten-to-one rangeability Heavy-wall, precision bore, borosilicate glass metering tubes A wide range of scales on the metering tube

More information