Super Duplex Stainless Steel Ball Valve with Mounting Pad 1/4-1

Transcription

1 76K-100-A SERIES Super Duplex Stainless Steel Ball Valve with Mounting Pad 1/4-1 Female NPT Thread, 2000 CWP (psig). Cold Non-Shock. (See referenced P/T chart) 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. MSS SP-110 compliant. FEATURES Investment cast components Reinforced seats Mounting pad for easy actuator mounting Blow-out-proof stem design Fire safe by design (requires -24 suffix) Adjustable packing gland SS lever and nut STANDARD MATERIAL LIST PART MATERIAL 1 Lever and grip 304 SS w/vinyl 2 Stem packing MPTFE 3 Stem bearing RPTFE 4 Ball ASTM A276/A479 Alloy Seat (2) RPTFE 6 Retainer ASTM A995 6A 7 Gland nut A Stem ASTM A276/A479 Alloy Lever nut 18-8 SS 10 Body seal PTFE 11 Body ASTM A995 6A OPTIONS AVAILABLE: (More information in Section J) Minimum quantities apply To specify an option, replace the 01 standard suffix with the suffix of the option. To specify multiple options, replace the 01 suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX) OPTION SIZES -01 Standard Configuration All -P -01- BSPP (Parallel) Thread Connection 1/4 to 3 -T -01- BSPT (Tapered) Thread Connection 1/4 to Stem Grounded 1/4 to Stem Extension (Carbon Steel, Zinc Plated) 1/4 to Steel Tee Handle 1/4 to º Reversed Stem 1/4 to Side Vented Ball (Uni-Directional) 1/4 to Wheel Handle, Steel 1/4 to Chain Lever - Vertical 3/4 to Lock Plate 1/4 to UHMWPE Trim (Non-PTFE) 1/4 to Graphite packing (fire safe by design ) 1/4 to SS Latch-Lock Lever & Nut 1/4 to Cam-Lock and Grounded 1/4 to SS Tee Handle & Nut 1/4 to PTFE Trim 1/4 to SS Hi-Rise Locking Wheel Handle, SS Nut 1/4 to Cyl-Loc and Grounded 1/4 to Seal Welded 1/4 to Less Lever & Nut 1/4 to Latch Lock Lever - Lock in Closed Position Only 1/4 to SS Latch Lock Oval Handle 1/4 to SS Oval Handle (No Latch) & Nut 1/4 to No Lubrication. Assembled Dry. 1/4 to CS Locking Stem Extension 1/4 to Oxygen Cleaned 1/4 to Chain Lever - Horizontal 3/4 to Static Grounded Ball & Stem 1/4 to # Steam Trim (MPTFE Seats & Packing) 1/4 to 3 PRODUCT NUMBER SIZE A B C D E F G H J K L M N WT. 76K A 1/ K A 3/ K A 1/ K A 3/ K A FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-29, GRAPH NO. 43 A-25

2 76K-100 SERIES Super Duplex Stainless Steel Ball Valve with Mounting Pad Female NPT Thread, 1500 CWP (psig). Cold Non-Shock. (See referenced P/T chart) 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. MSS SP-110 compliant. FEATURES Investment cast components Reinforced seats Mounting pad for easy actuator mounting Blow-out-proof stem design Fire safe by design (requires -24 suffix) Adjustable packing gland SS lever and nut STANDARD MATERIAL LIST PART MATERIAL 1 Lever and grip 304 SS w/vinyl 2 Stem packing MPTFE 3 Stem bearing RPTFE 4 Ball ASTM A276/A479 Alloy Seat (2) RPTFE 6 Retainer ASTM A995 6A 7 Gland nut A SS 8 Stem ASTM A276/A479 Alloy Lever nut 18-8 SS 10 Body seal PTFE 11 Body ASTM A995 6A OPTIONS AVAILABLE: (More information in Section J) Minimum quantities apply To specify an option, replace the 01 standard suffix with the suffix of the option. To specify multiple options, replace the 01 suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX) OPTION SIZES -01 Standard Configuration All -P -01- BSPP (Parallel) Thread Connection 1/4 to 3 -T -01- BSPT (Tapered) Thread Connection 1/4 to Stem Grounded 1/4 to Stem Extension (Carbon Steel, Zinc Plated) 1/4 to Steel Tee Handle 1/4 to º Reversed Stem 1/4 to Side Vented Ball (Uni-Directional) 1/4 to Wheel Handle, Steel 1/4 to Chain Lever - Vertical 3/4 to Lock Plate 1/4 to UHMWPE Trim (Non-PTFE) 1/4 to Graphite packing (fire safe by design ) 1/4 to SS Latch-Lock Lever & Nut 1/4 to Cam-Lock and Grounded 1/4 to SS Tee Handle & Nut 1/4 to PTFE Trim 1/4 to SS Hi-Rise Locking Wheel Handle, SS Nut 1/4 to Cyl-Loc and Grounded 1/4 to Seal Welded 1/4 to Less Lever & Nut 1/4 to Latch Lock Lever - Lock in Closed Position Only 1/4 to SS Latch Lock Oval Handle 1/4 to SS Oval Handle (No Latch) & Nut 1/4 to No Lubrication. Assembled Dry. 1/4 to CS Locking Stem Extension 1/4 to Oxygen Cleaned 1/4 to Chain Lever - Horizontal 3/4 to Static Grounded Ball & Stem 1/4 to # Steam Trim (MPTFE Seats & Packing) 1/4 to 3 PRODUCT NUMBER SIZE A B C D E F G H J K L M WT. 76K K K FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-30, GRAPH NO. 44 A-26 Customer Service (704)

3 76K-100 SERIES Super Duplex Stainless Steel Ball Valve with Mounting Pad Female NPT Thread, 1000 CWP (psig). Cold Non-Shock. (See referenced P/T chart) 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. MSS SP-110 compliant. FEATURES Investment cast components Reinforced seats Mounting pad for easy actuator mounting Blow-out-proof stem design Fire safe by design (requires -24 suffix) Adjustable packing gland SS lever and nut STANDARD MATERIAL LIST PART MATERIAL 1 Lever and grip 304 SS w/vinyl 2 Stem packing MPTFE 3 Stem bearing RPTFE 4 Ball ASTM A276/A479 Alloy Seat (2) RPTFE 6 Retainer ASTM A995 6A 7 Gland nut A SS 8 Stem ASTM A276/A479 Alloy Lever nut 18-8 SS 10 Body seal PTFE 11 Body ASTM A995 6A OPTIONS AVAILABLE: (More information in Section J) Minimum quantities apply To specify an option, replace the 01 standard suffix with the suffix of the option. To specify multiple options, replace the 01 suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX) OPTION SIZES -01 Standard Configuration All -02- Stem Grounded 1/4 to Stem Extension (Carbon Steel, Zinc Plated) 1/4 to Steel Tee Handle 1/4 to º Reversed Stem 1/4 to Side Vented Ball (Uni-Directional) 1/4 to Wheel Handle, Steel 1/4 to Chain Lever - Vertical 3/4 to Lock Plate 1/4 to UHMWPE Trim (Non-PTFE) 1/4 to Graphite packing (fire safe by design ) 1/4 to SS Latch-Lock Lever & Nut 1/4 to Cam-Lock and Grounded 1/4 to SS Tee Handle & Nut 1/4 to PTFE Trim 1/4 to SS Hi-Rise Locking Wheel Handle, SS Nut 1/4 to Cyl-Loc and Grounded 1/4 to Seal Welded 1/4 to Less Lever & Nut 1/4 to Latch Lock Lever - Lock in Closed Position Only 1/4 to SS Latch Lock Oval Handle 1/4 to SS Oval Handle (No Latch) & Nut 1/4 to No Lubrication. Assembled Dry. 1/4 to CS Locking Stem Extension 1/4 to Oxygen Cleaned 1/4 to Chain Lever - Horizontal 3/4 to Static Grounded Ball & Stem 1/4 to # Steam Trim (MPTFE Seats & Packing) 1/4 to 3 PRODUCT NUMBER SIZE A B C D E F G H J K L M WT. 76K K FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-30, GRAPH NO. 45 A-27

4 FLOW DATA For Apollo Ball Valves The listed Cv factors are derived from actual flow testing, in the Apollo Ball Valve Division, Conbraco Industries, Inc., Pageland, South Carolina. These tests were completed using standard off the shelf valves with no special preparation and utilizing standard schedule 40 pipe. It should be understood that these factors are for the valve only and also include the connection configuration. The flow testing is done utilizing water as a fluid media and is a direct statement of the gallons of water flowed per minute with a 1 psig pressure differential across the valve/ connection unit. Line pressure is not a factor. Because the Cv is a factor, the formula can be used to estimate flow of most media for valve sizing. FLOW OF LIQUID P Q = C V SpGr or P = (Q) 2 (SpGr) (Cv) 2 FLOW OF GAS ( P) (P2) Q = 1360 C V (SpGr) (T) or P = 5.4 x 10-7 (SpGr) (T) (Q) 2 (Cv) 2 (P2) Where: Q = ΔP = SpGr = Cv = flow in US gpm pressure drop (psig) specific gravity at flowing temperature valve constant Where: Q = flow in SCFH ΔP = pressure drop (psig) SpGr = specific gravity (based on air = 1.0) P 2 = outlet pressure psia (psig ) T = (temp. F + 460) Cv = valve constant CAUTION: The gas equation shown, is valid at very low pressure drop ratios. The gas equation is NOT valid when the ratio of pressure drop (ΔP) to inlet pressure (P1) exceeds NOTE: Only use the gas equation shown if (P1-P2)/P1 is less than Cv FACTORS FOR APOLLO VALVES VALVE SIZE (IN.) 1/4 3/8 1/2 3/ B-140 Series /200 Series /400 Series Series Series AR Series /200 Series /900 Series A-100 Series /400 Series Series Series AR Series F-100 Series FJ-100 Series FK-100 Series Series /400 Series Series J-100 Series J-AR Series K-100 Series K-AR Series K-100 Series AR Series C-100/200 Series D-140 Series continued on next page M-3

5 FLOW DATA For Apollo Ball Valves Cv FACTORS FOR APOLLO VALVES (continued from M-3) VALVE SIZE (IN.) 1/4 3/8 1/2 3/ D-640 Series G-UL Series W Series /200 Series Series Series /200 Series A/83B Series R-100/200 Series A/86B Series R-100/200 Series A-100 Series A-200 Series A-700 Series A-900 Series A-F00 Series B-100 Series J-100 Series J-200 Series J-700 Series J-900 Series K-100 Series K-200 Series K-700 Series K-900 Series A-100 Series A-200 Series A-700 Series A-900 Series A-F00 Series B-100 Series Series A-100 Series Series Series Series A-100/200 Series Series Series Series M-4 Customer Service (704)

6 PRESSURE TEMPERATURE RATINGS Class 600 Duplex ASTM A995-CD3MN & Super Duplex CD3MWCuN (GRAPH 42) 2000 CWP Duplex ASTM A995-CD3MN & Super Duplex CD3MWCuN (GRAPH 43) M-29

7 PRESSURE TEMPERATURE RATINGS 1500 CWP Duplex ASTM A995-CD3MN & Super Duplex CD3MWCuN (GRAPH 44) 1000 CWP Duplex ASTM A995-CD3MN & Super Duplex CD3MWCuN (GRAPH 45) M-30 Customer Service (704)