Shadab Bagheri-Khoulenjani Assistant Professor

Transcription

1 Shadab Bagheri-Khoulenjani Assistant Professor Polymer Engineering Department, Amirkabir University of Technology (Tehran Polytechnic), 424 Hafez- Av, PO Box: ,Tehran, Iran Tel: (0098) (or PERSONAL INFORMATION Date of birth 23 rd Sep 1980 Place of birth Lenjan, Isfahan, Iran Marital status Single LANGUAGES English Persian French Fluent Mother tongue Good POSITIONS Assistant Professor Polymer Engineering Department, Amirkabir University of Technology Research assistance At Biopolymer Lab, Polymer Engineering Department, Amirkabir University of Technology 2012 Invited lecturer Amirkabir University of Technology Coordinating Editor of Progress in Biomaterials 2012 Head of international affairs of 10 th International Seminar on Polymer Science and Technology, Amirkabir University accepted in Scientific Interview for an academic position (as an assistant Prof) at Amirkabir University of Technology 2012 accepted in Scientific Interview for an academic position (as an assistant Prof) at Isfahan University 2011 Head of polymer R&D department, Sabok Sazan Loshan Co Executive manager of 9 th polymers in medicine workshop: methods to study and improve the cell behavior on the tissue engineering scaffolds, Iran Polymer & Petrochemical Institute, Tehran, Iran Researcher at Iran Polymer and Petrochemical Institute

2 EDUCATION Ph.D. in Biomedical Engineering-Biomaterials Department of Biomedical Engineering, Amirkabir University of Technology ( Tehran, Iran Thesis study and fabrication of a natural injectable nano-composite for bone tissue engineering application Supervisor Dr Mohammad Etrati-Khosroshahi Advisor Prof. Hamid Mirzadeh M.Sc. in Biomedical Engineering-Biomaterials, Department of Biomedical Engineering, Amirkabir University of Technology ( Tehran, Iran Thesis comparison the effect of excimer laser and RF plasma on polystyrene surface based on biocompatibility Supervisor Prof. Hamid Mirzadeh B.Sc. in Material Engineering Department of Materials Engineering, Sahand University of Technology ( Tabriz, Iran Thesis Preparation of a new software to calculate percentage of residual austenite and its carbon content in ductile irons Supervisor Dr. Sasan Yazdani HONOURS AND AWARDS 1. Nanotechnology Scholarship from Iran nanotechnology association, Best presenting award, 9 th International Seminar on Polymer Science and Technology (ISPST2009), Tehran, Iran, Member of First-ranked PhD students, Amirkabir University of Technology, Iran, rd rank in the 13 th Razi Medical Sciences Research Festival, Iran, 2008 (as a colleague). 5. Nanotechnology Scholarship from Iran nanotechnology association, Published in Journals PUBLICATIONS 2013 Shadab Bagheri-Khoulenjani, Hamid Mirzadeh, Mohammad Etrati-Khosroshahi, Mohammad ali shokrgozar, Particle size modeling and morphology studies of chitosan/gelatin/nha nanocomposite microspheres, Journal of Biomedical Materials Research: Part A, Shadab Bagheri-Khoulenjani and Hamid Mirzadeh, Polystyrene surface modification using excimer laser and radio-frequency plasma: blood compatibility evaluations, Progress in Biomaterials, 2012, 1: Shahriar sharifi, Yousef Shafieyan, Hamid Mirzadeh, Shadab Bagheri- khoulenjani, Seyed mahmoud rabiee, Mohammad Imani, Mohammad Atai, Mohammad ali shokrgozar, Ali hatam poor, Hydroxyapatite scaffolds infiltrated with thermally crosslinked polycaprolactone fumarate and polycaprolactone itaconate, Journal of Biomedical Materials Research: Part A, 98(2), ,2011.

3 Published in Journals 2011 Shadab Bagheri-Khoulenjani, Hamid Mirzadeh and Mohammad Etrati-Khosroshahi, Investigation on the effect of chitosan and nanohydroxyapatite on the physical and chemical characteristics of gelatin/chitosan/nanohydroxyapatite microspheres, Iranian Journal of Polymer Science and Technology, 2011, accepted (in Persian). Shadab Bagheri Khoulenjani, Hamid Mirzadeh, Morteza Daliri, Alireza Zare Shahabadi, Nanostructure Induction on the Surface of Polystyrene Using Arf Excimer Laser for Improvement of Biocompatibility, Laser In Medicine 8(2):11-19, 2011 (in Persian) Shadab Bagheri-Khoulenjani, Mohammad Etrati-Khosroshahi and Hamid Mirzadeh, An investigation on the particle size and particle size distribution of nanocomposite microspheres based on nanohydroxyapatite-in-gelatin, Iran Polymer Journal, 19 (10), , S. Bagheri-Khoulenjani, S.M. Taghizadeh, H. Mirzadeh, An investigation on the shortterm biodegradability of chitosan with various molecular weights and degrees of deacetylation, Carbohydrate Polymers, 78, , Shadab Bagheri-Khoulenjani, Hamid Mirzadeh and Mohammad Etrati-Khosroshahi, Effect of process parameters on the size of nanohydroxyapatite/gelatin microspheres, Iranian Journal of Polymer Science and Technology, 22(4), (in Persian) H. Mirzadeh and Sh. Bagheri, Comparison the effect of excimer laser and RF plasma on polystyrene surface, Journal of Radiation Physic and Chemistry, 7, , Shadab Bagheri and Hamid Mirzadeh,Effect of RF Plasma on Polystyrene Surface Properties, Iranian Journal of Polymer Science and Technology, 19(5), , 2006 (in Persian). Published in conference proceedings 2012 Shadab Bagheri-Khoulenjani, H. Mirzadeh, M. E. Khosroshahi, The Rheological Study of a Novel Injectable System Based on Biotinylated Nanocomposite Microspheres, 9th World Biomaterials Congress, China, Shadab Bagheri-Khoulenjani, H. Mirzadeh, M. E. Khosroshahi, M. A. Shokrgozar, A Novel Injectable Bio-nanocomposite for Bone Tissue Engineering Applications, 9th World Biomaterials Congress, China, Shadab Bagheri-Khoulenjani, Hamid Mirzadeh, Mohammad Reza, Baghban- Eslaminejad, Fatemeh Bagheri Investigation on a Novel Injectable Nanocomposite Based on nha-in-plga/nmp for Bone Tissue Engineering, 9th World Biomaterials Congress, China, Shadab Bagheri-khoulenjani, Hamid Mirzadeh. Mohammad Etrati-Khosroshahi, Biotinylated microspheres: a novel cell delivery vehicle for bone tissue engineering applications, 23 th ESB2010, Tempere, Finland, 2010 (presented). Shadab Bagheri-khoulenjani, Hamid Mirzadeh. Mohammad Etrati-Khosroshahi, fabrication of nanohydroxyapatite-in-chitosan/gelatin porous microspheres for bone tissue engineering applications, EORS2010, Davos, Switzerland, 2010 (presented).

4 Published in conference proceedings 2009 Shadab Bagheri-khoulenjani, Hamid Mirzadeh, Study on a novel self-assembled injectable system for tissue engineering application, 9 th international seminar on polymer science and technology, Tehran, Iran, 2009 (presented). Shadab Bagheri-khoulenjani, Hamid Mirzadeh and Mohammad Etrati-Khosroshahi, Effect of nano-hydroxyapatite on the particle size and morphology of gelatin/nanohydroxyapatite microspheres, 9 th international seminar on polymer science and technology, Tehran, Iran, 2009 (presented). Shadab Bagheri-khoulenjani, Hamid Mirzadeh, Investigation on a novel injectable nano-composite containing Erythropoietin for bone tissue engineering, XXXVI ESAO Congress, Compiègne, France, 2009 (presented) Shadab Bagheri-khoulenjani, Investigation and controlling the degradation kinetic of biodegradable tissue engineering scaffolds, 9 th workshop of polymers in medicine in Iran Polymer and Petrochemical Institute, Tehran, Iran, 2009 (presented) Shadab Bagheri-khoulenjani, Hamid Mirzadeh, nano-structure induction and blood compatibility enhancement of polystyrene by ArF laser irradiation, 8 th world biomaterials congress, Amsterdam, Netherlands, 2008 (presented) Shadab Bagheri, Hamid Mirzadeh, Biocompatibility and blood compatibility enhancement of polystyrene surface by RF plasma, 8 th international seminar on polymer science and technology, Tehran, Iran, 2007 (presented). S. Mojtaba Taghizadeh, Hamid Mirzadeh, Shadab Bagheri, Effect of molecular weight on biodegradation of chitosan in SIF, 8 th international seminar on polymer science and technology, Tehran, Iran, 2007 (presented). Shadab Bagheri, Hamid Mirzadeh, Nanostructure induction on polystyrene surface by excimer laser and studying treated surface properties, 2 th conference of nanotechnology, Kashan, Iran, 2007(presented) Hamid Mirzadeh and Shadab Bagheri, Comparison the effect of excimer laser and RF plasma on polystyrene surface: in vitro assay, 11 th conference on Radiation chemistry, Tihani, Hungary, 2006 (Presented) Shadab Bagheri and Sasan Yazdani, Preparation of new software to calculate percentage of residual austenite and study the effect of time treatment and temperature treatment on it, Iranian seminar on Metallurgy Science, Sharif university of technology, Tehran, Iran (October- 2003) (presented). PATENTS Biocompatibility and blood compatibility enhancement of polystyrene surface by RF plasma and Excimer laser, Shadab Bagheri, Hamid Mirzadeh, Iranian Patent no.39374, 2007.

5 RESEARCH EXPERIENCE in vivo study on a nano-composite based on PLGA/nHA containing gelatin/nha microspheres for bone tissue engineering. Project manager: Prof. Mirzadeh Iran Polymer & Petrochemical Institute, Biocompatible polymers Department Bone regeneration by using a biodegradable and injectable system containing Erythropoietin. Project manager: Prof. Mirzadeh Iran Polymer & Petrochemical Institute, Biocompatible polymers Department Preparation of oral drug delivery system for Desmopressin by using biocompatible polymers. Project manager: Prof. Mirzadeh and Dr Taghizadeh Iran Polymer & Petrochemical Institute, Novel Drug Delivery Systems Department TEACHING EXPERIENCE 2013 Lecturer of Applications and properties of natural polymers for undergraduates that were held in Polymer Engineering Department at Amirkabir University of Technology Lecturer of Biocompatible polymers for dergraduates that were held in Polymer Engineering Department at Amirkabir University of Technology 2012 Lecturer of Biomaterials forming methods for undergraduates that were held in Biomedical Engineering Department at Amirkabir University of Technology Teaching Assistance of Prof. Mirzadeh in: Tissue Engineering Advanced biocompatibility Polymers and their application in medicine Modern methods for surface analyzing of polymers that were held at Amirkabir University of Technology and Iran Polymer and Petrochemical Institute.

6 References Prof Hamid Mirzadeh Prof Mohammad Etrati-Khosroshahi Prof Ebrahim Vasheghani-Farahani Dr Farhad Sharif Professor in Polymer Engineering Department, Amirkabir University of Technology (Tehran Polytechnic), 424 Hafez- Av, PO Box: ,Tehran, Iran Professor in Biomedical Engineering Department, Amirkabir University of Technology (Tehran Polytechnic), 424 Hafez- Av, PO Box: ,Tehran, Iran Professor in Chemical Engineering Department, Tarbiat Modaress University Head of Polymer Engineering Department, Amirkabir University of Technology (Tehran Polytechnic), 424 Hafez- Av, PO Box: ,Tehran, Iran