Thermo Scientific Dionex ICS-900 Ion Chromatography System

Transcription

1 CHROMATOGRAPHY Thermo Scientific Dionex ICS-9 Ion Chromatography System Product Specifications The Thermo Scientific Dionex ICS-9 is an integrated, dual piston, isocratic ion chromatography system that performs no compromise IC separations. The system is designed for ease of use, providing fast startup times and reliable, stable performance for your demanding applications. Built with the aim of maintaining low operating costs, the Dionex ICS-9 uses proven and reliable technologies to deliver results you can count on. Low-Cost Reliability Sensitive, stable, heated conductivity detection for precise results Thermo Scientific Dionex MMS MicroMembrane Suppressor suppression with displacement chemical regeneration (DCR) technology for drift free baseline and ease-of-use Flexible pump flow range to support,, and mm isocratic anion and cation columns Dual-piston, serial pumping system with PEEK flowpath for low maintenance costs and maximum up-time All-polymeric flow pathway to eliminate contamination and corrosion Thermo Scientific Dionex Chromeleon Chromatography Data System Software for full control, quality integration, and versatile reports to exceed all your data processing needs USB connectivity for fast, troublefree instrument connection and configuration Integrated IQ/OQ/PQ to routinely assure the quality of your results Compatible with all Dionex IC autosamplers. The Thermo Scientific Dionex AS-DV autosampler is recommended for economical unattended operation, including sample filtration Compatibility with a broad range of Dionex polymeric separation columns for unparalleled application flexibility and reliability.

2 Thermo Scientific Dionex IonPac AS, mm.8 mm carbonate/. mm bicarbonate Flow Rate:. ml/min Inj. Volume:. µl Temp: Ambient Detection: Suppressed conductivity Thermo Scientific Dionex AMMS, mm Seven anion standard 7. Fluoride. Chloride. Nitrite. Bromide. Nitrate. Phosphate 7. Sulfate Dionex IonPac CSA, mm mm MSA Flow Rate:. ml/min Inj. Volume: µl Temperature: Ambient Detection: Suppressed conductivity, Thermo Scientific Dionex CMMS, mm, mm TBAOH regenerant Six cation standard, / dilution mg/l. Lithium. Sodium. Ammonium. Potassium. Magnesium. Calcium mg/l Overlay of cation separations performed on the Dionex ICS-9 using a mm Dionex IonPac CSA cation-exchange column. Results show high reproducibility. Peak areas and retention times are highly reproducible and baselines are stable and noise-free, as demonstrated in these overlays of anion determinations (n=). Flow Rate: Inj. Volume: Temperature: Detection: 7 Dionex IonPac AS, mm.8 mm carbonate/. mm bicarbonate. ml/min. µl Ambient Suppressed conductivity, Dionex AMMS, mm Seven anion standard. Fluoride. Chloride. Nitrite. Bromide. Nitrate. Phosphate 7. Sulfate mg/l Dionex IonPac AS mm column for reduced reagent usage with high performance and fast separation. Application and column flexibility:,, and mm isocratic columns Outstanding access to chromatography components Ultra reliable, low carryover, electric Rheodyne injection valve Dual piston, serial pumping system with stability from. to. ml/min at pressures to psi Heated conductivity cell and Dionex MMS MicroMembrane Suppressor for stable, noise-free results 7

3 Analytical Pump and Hydraulics Type Construction Pump Operating Pressure Flow Rate Range Flow Precision <.% Flow Accuracy <.% Pressure Ripple <% Eluent Bottle Pressure Vacuum Degasser Gradient Capabilities Eluent Generation Injection Valve Dionex ICS-9 IC System Specifications Serial dual-reciprocating pistons, microprocessor-controlled constant stroke, variable speed Chemically inert, metal-free PEEK pump heads and flow paths compatible with aqueous eluents of ph and reversed-phase solvents MPa ( psi).. ml/min without changing pump heads No gas required Optional with external vacuum degasser Optional with Thermo Scientific Dionex RFC- Optional with Dionex RFC- -port, position Rheodyne valve, electically actuated Column Heater/Thermostat Optional External Heater, CTS-, to 8 C, minimum C above ambient Suppressor Compatibility Chemical Suppression - or - port, -position high-pressure Rheodyne valves, fully inert PEEK construction, electrically activated Displacement Chemical Regeneration Yes, anion and cation, and mm Electrolytic Suppression, Self-Regenerating Optional with Dionex RFC- Electrolytic Suppression, Self-Regenerating, Optional with Dionex RFC- External Water Suppression Capacity Anions: Thermo Scientific Dionex ASRS Anion Self-Regenerating Suppressor ( mm): μeq/min Dionex ASRS ( mm): μeq/min Dionex AMMS Suppressor ( mm): μeq/min Dionex AMMS ( mm): 7. μeq/min Thermo Scientific Dionex Anion Atlas Electrolytic Suppressor: μeq/min Cations: Thermo Scientific Dionex CSRS Cation Self-Regenerating Suppressor ( mm): μeq/min Dionex CSRS ( mm): 7. μeq/min Dionex CMMS Cation MicroMembrane Suppressor ( mm): μeq/min Dionex CMMS ( mm): 7. μeq/min Thermo Scientific Dionex Cation Atlas Electrolytic Suppressor: μeq/min Void Volume Thermo Scientific Dionex SRS Self-Regenerating Suppressor ( mm): < μl Dionex SRS ( mm): < μl Dionex MMS ( mm): < μl Dionex MMS ( mm): < μl Dionex AMMS-ICE ( mm): < μl Dionex AMMS-ICE ( mm): < μl Dionex AAES: < μl Dionex CAES: < μl Sequential Suppression for Anions Yes, Dionex MMS + Thermo Scientific Dionex CRD Carbonate Removal Device Suppressor Wear Parts None; peristaltic pump and inline filters not required

4 Conductivity Detector Type Dionex ICS-9 IC System Specifications (continued) Bipolar heated conductivity cell, microprocessor-controlled digital signal processing over the range, μs/cm Detector Linearity % Maximum Cell Pressure MPa ( psi) Resolution.7 ns/cm Cell Calibration Factory calibrated as a new system and calibrated in the field individually with memory retention and transfer Flow Cell Chemical Compatibility (Standard) Fully compatible with all typical ion chromatography eluents, including MSA Autosampler Automation Using Autosampler Yes, Dionex AS-DV, AS-AP, AS-HV Autosamplers or third party Sequential/Simultaneous Injection Yes, depending on autosampler capabilities Automated Dilution Yes, available with Dionex AS-AP Autosampler Dilution Factor, Dionex AS-AP Autosampler : to : Dilution Time, Dionex AS-AP Autosampler s with sample overlap Inline Sample Degassing Optional with Thermo Scientific Dionex CRD /CRD Inline Filtration Optional with Dionex AS-DV Autosampler or inline filter Automation Flexibility High, conditionals using Chromeleon software and post run features Semiautomated System Qualification Yes, IQ/OQ/PQSequential Suppression for Anions System Software Chromeleon Chromatography Data System requires Windows 7, XP, or Vista Automated ProcedureWizards System Wellness and Predictive Performance Virtual Column Simulator (evaluation mode standard, isocratic and gradient optional) Application Templates Multivendor Automation Support of rd Party (fully controls over instruments from more than manufacturers, including GC, HPLC, and MS) Customizable System Control Panels System Status Virtual Channels Power Failure Protection Sequential Injection System Trigger Commands and Conditionals Automated ProcedureWizards System Wellness and Predictive Performance Virtual Column Daily Audit Trail Sample Audit Trail Multiple Network Control and Network Failure Protection System Calibration Storage (factory, present, and previous; completely user selectable) Customized Reporting Physical Specifications Physical Specifications Dimensions (h w d): cm cm cm in 9. in.7 in Weight kg ( lb) Power Requirements to V ac, to Hz, autoranging System Flow Path All polymeric (PEEK), anion or cation configurations

5 Ordering Information In the U.S., call (8) -9 or contact the Thermo Fisher Scientific Regional Office nearest you. Outside the U.S., order through your local Thermo Fisher Scientific office or distributor. Refer to the following part numbers. Dionex ICS-9 Ion Chromatography System part Number Dionex ICS-9 Ion Chromatography System, with Chromeleon SE and PC 7 Dionex ICS-9 Ion Chromatography System with Chromeleon SE, without PC 7 Dionex ICS-9 Ion Chromatography System expansion unit 7 Product Specifications Thermo Fisher Scientific Inc. All rights reserved. ISO is a trademark of the International Standards Organization. All other trademarks are the property of Thermo Fisher Scientific Inc. and its subsidiaries. Specifications, terms and pricing are subject to change. Not all products are available in all countries. Please consult your local sales representative for details. Thermo Fisher Scientific, Sunnyvale, CA USA is ISO 9:8 Certified. Australia Austria + Belgium + 7 Brazil + 7 China Denmark + 7 France Germany India Italy +9 7 Japan Korea +8 8 Netherlands Singapore Sweden Switzerland + 99 Taiwan UK/Ireland + USA and Canada PS7_E /S