For personal use only. copyright Quickstep Holdings. All Rights Reserved.

Transcription

1 copyright Quickstep Holdings. All Rights Reserved.

2 Disclaimer» This Presentation is provided by Quickstep Holdings Limited ( Quickstep or the Company ) as a summary of the Company and its operations and for general information purposes only.» This presentation is not a disclosure document and should not be considered as investment advice or an offer or invitation to subscribe for or purchase any securities in Quickstep, or an inducement to make an offer or invitation with respect to such securities. This presentation does not purport to cover all relevant information about any potential investment in Quickstep. Accordingly, potential investors are advised to seek appropriate independent advice, if necessary, to determine the suitability of any investment. This presentation must not be relied on to make an investment or other financial decision and recipients should conduct their own investigations, enquiries and analysis and place no reliance on this presentation in evaluating any potential investment.» None of Quickstep, or their respective employees, officers, related entities or advisers have audited or investigated the accuracy or completeness of the information, statements and opinions contained in this presentation. Accordingly, to the maximum extent permitted by applicable laws, none of them makes any representation and none of them gives any assurance, guarantee or warranty, express or implied, as to, and none of them takes any responsibility or assumes liability (including in negligence) for the authenticity, validity, accuracy, suitability or completeness of, or any errors in or omissions from, any information, statement or opinion contained in this presentation.» This presentation contains certain forward-looking statements which have not been based solely on historical facts but, rather, on Quickstep s current expectations about future events and on a number of assumptions which are subject to significant uncertainties and contingencies, many of which are outside the control of Quickstep and its directors, officers and advisors. Quickstep undertakes no obligation to update these forward-looking statements for events or circumstances that occur subsequent to such statements or to keep current any of the information provided. Any estimates or projections as to events that may occur in the future (including projections of revenue, expense, net income and performance) are based upon the best judgement of Quickstep and there is no guarantee that any of these estimates or projections will be achieved. Actual results will vary from the projections and such variations may be material. Quickstep has no obligation to tell recipients if it becomes aware of any inaccuracy in or omission from the information in this presentation.» Other than for the pictures of the Quickstep facilities and machinery, the assets featured in the pictures in this presentation are not assets of the Company.» By accepting this presentation, you acknowledge and agree to be bound by each of the foregoing statements. 1

3 Quickstep Vision and Mission Advanced Manufacturing, Smart Technology in one Vision: To Deliver Innovative Composite Solutions Globally Mission: Global Composite Solutions Through smart technology and the creation of unique value propositions for each of our stakeholders, we will become the global provider of choice in delivering high quality composite manufacturing solutions Advanced Manufacturing Smart Technology 2

4 Global Carbon Fibre Industry Opportunities Demand for carbon fibre expected to increase substantially through to Demand has increased at an 8.1% CAGR since 2008; expected to grow up to 10% CAGR going forward Global Demand for Carbon Fibre Source: Composites Market Report CCeV & AVK.» Largest industry users of carbon fibre: Aerospace & Defence (30%) Wind Energy (14%) Sport/Leisure (14%) Automotive (11%)» Significant Aerospace growth expected over the coming 20 years Airbus expects 27,800 new aircraft ordered between Boeing forecast higher at 33,500 aircraft» Fastest growing industry segment is forecast to be Automotive Governments globally are increasing penalties to reduce carbon emissions Vehicle lightweighting a major priority 3

5 Quickstep Patented Process Technologies Resin Spray Transfer (RST) Lay-up» Spray or deposit resin onto tool» Pick & place 3D dry fibre preform onto sprayed resin» Vacuum bag the resin / preform layup» Cure» Demoulding Benefits» Automated process» Faster processing times» Resin rich surface for exterior panels» Class A surface finish» Reduced material costs» Reduced tooling costs» Paintability ure Process Moulding / Curing» Fast curing of composite using fluid heat transfer» Turnkey manufacturing solutions for Aerospace, Defence & Automotive business clients» Significant advantages over traditional industry-based manufacturing techniques Benefits» Reduced production time» Greater design flexibility» Better end-product technical characteristics» Reduced capital investment» Reduced energy consumption» Lower tooling costs» Greater control over cure cycle 4

6 What is Qure The Quickstep Qure process is an out-of-autoclave process that uses flexible fluid filled membranes to apply heat and consolidation pressure to composites during the curing process. The end result is a high quality composite structure that can be made on low-cost flexible equipment. The equipment has two components. The process heating/cooling plant provides precisely controlled pressurised and temperature-controlled fluid and the tool tray houses the part, tooling and flexible membranes that applies heat and pressure to the laminate. The plant is a fixed piece of equipment that can supply fluid to a range of trays configured to suit parts of different size or geometry. The part is laid up in the tool The finished component can be removed from the tool The tool is closed The tool is opened Pressure is applied with the flexible bladder The Pressure is removed from the part Heat is applied from the Quickstep Machine The heat is removed from the part Rapid Qure Development Plans

7 Quickstep Systems Unique Value Proposition Unique value proposition is different for each of Quickstep s divisions» Common elements are: Innovative processes Solutions focus Lower costs Weight reduction Specific growth strategies have been developed for each Quickstep division» Quickstep Aerospace Patented manufacturing processes in Qure and RST providing a Reduction in Assets Cost, Space utilisation, labour efficiency, Quality of product and high level of customer value including high levels of mass reduction and strength» Quickstep Automotive Low pressure process delivering optimal sandwich cored structures and unique Resin processing delivering quality A-class surfaces. Industrialisation for high volume in development leading to RapidQure for global markets Strong value proposition for aerospace, defence, automotive & transport sectors 6

8 Total Cost Quickstep Technology Comparison» ure Process Significant economic advantages over Autoclave & Oven curing - Lower capital costs Main Moulding Process Technologies <3,000 units p.a. 3,000-10,000 units p.a. >10,000 units p.a. - Lower tooling costs - Lower running costs Autoclave RTM Compression Moulding - Reduced processing times - Reduced cycle times - Reduced de-bulking - Improved resin flow Oven Curing RapidClave RapidQure» Rapid ure Process Being developed to compete with Compression moulding for volume Hand Lay-up Qure - Lower capital & tooling costs - Lower running costs - Low pressure core structures - Improved surface quality with RST Aerospace/Defence Automotive 7

9 Quickstep Overview of Business Units Aerospace Manufacturing Quickstep Aerospace Quickstep Automotive Quickstep Systems» Advanced manufacturer of composite components and assemblies in NSW» Autoclave and Quickstep-patented manufacturing processes» All facets of aerospace & defence manufacturing contract work» Focused on aerospace and defence sectors» Supplies, installs and maintains proprietary Quickstep-patented process technologies» Qualifying these processes as alternative to using autoclaves for Aerospace» Automotive division in Waurn Ponds, Victoria» Will manufacture niche volume components and assemblies» Focus on Class A surface parts and structural components» R&D Centre based at Deakin University in Waurn Ponds, Victoria» Responsible for:» Research & Development» Process development» IP and commercialisation» Program management 8

10 Quickstep Key Customers & Locations MUNICH Quickstep support office for Aerospace and Automotive Sales and R&D 10 employees USA Europe BANKSTOWN Manufacturing and Quickstep Aerospace Nadcap accredited facility 150 employees Australia WAURN PONDS Quickstep Automotive Fit-out complete CY15 Expected to employ 30 by 2017 Global Auto OEM 9

11 QHL Shareholder Status» 397.8M shares currently on issue» Market cap of $73.6M as at 19/10 close» Major Shareholder is Washington H. Soul Pattinson and Company Limited (WHSP) Has been major shareholder since QHL listed in 2005 WHSP holds 17.1% of shares in QHL» Over 6000 shareholders on the register» Top 20 Shareholders hold approximately 35% of QHL shares 10

12 FY15 financial highlights Aerospace Manufacturing division driving strong turnaround in revenue and PBIT performance» Record Sales of $39.5m in FY15, up 229% FY14 Revenue: $12.0 million 31 ship sets delivered to Lockheed Martin for the C- 130J program 464 JSF parts delivered to Northrop Grumman» Strong FY15 H2 PBIT performance H2 operating profit (PBIT) of $2.23m Significant turnaround in full year PBIT $40.0m $30.0m $20.0m $10.0m Year-On-Year Sales and PBIT Performance FY15 - H1, $13.4m FY15, $39.5m $26.1m $13.4m» Firm order book currently in excess of A$74.9m - ($10.0m)» $1.76m GRIIF grant awarded for start-up of Quickstep Automotive in Waurn Ponds» Sales growth momentum is expected to continue in FY16 ($20.0m) Sales PBIT FY11 FY12 FY13 FY14 FY15 - H1 FY15 $0.5m $0.5m $2.6m $12.0m $13.4m $39.5m ($12.1m) ($13.7m) ($16.1m) ($9.0m) ($3.0m) ($0.7m) 11

13 Aerospace Manufacturing The Aerospace Manufacturing division s manufactures composite parts for the C-130J Hercules and the Joint Strike Fighter program C-130J Hercules» Quickstep is the exclusive supplier of composite wing flaps to Lockheed Martin for the C-130J Hercules aircraft under US$75m MoA 31 sets delivered in FY15 (343% y.o.y.) FY16 production to continue at a rate of 3 sets of wing flaps per month Divisional outlook and strategic objectives» Circa $40m divisional sales in FY16 (20% growth y.o.y)» Firm order book currently in excess of $75m with expected further growth» New growth projects now under negotiation. Joint Strike Fighter program» Sole supplier globally to Northrop Grumman for 21 JSF parts 464 parts delivered in FY15 (increase of 152% y.o.y.) Expecting three-fold increase in production over the next three years» Supplier of vertical tails for production ramp up forecast in FY16 (subject to final customer approval) which will provide significant revenue momentum from FY17 12

14 Quickstep Automotive Quickstep has secured its first contract with a global OEM and will supply parts for the recently announced Hawkei project Hawkei» Exclusive supplier of the bonnet, side skirts and mud guards for Hawkei vehicles under LOI with Thales Australian government awarded Thales the $1.5 billion supply contract on 4 October 2015 Project utilises Quickstep s innovative Qure and RST processes Global OEM» Production of up to 1,000 lightweight carbon fibre engine compartment parts Divisional outlook and strategic objectives» Waurn Ponds facility fit-out to be completed in Q2 FY16» Target small volume projects (including composite seat structure and A-class panel projects)» Increase production volume capability to secure larger projects - RapidQure Production - expected to commence early 2016 Opportunity to sell additional parts through OEM dealerships PRESCHE project» German-government funded project undertaken with Audi and other partners» High quality outcome for Quickstep in June 2015 Confirmed Qure and RST processes ability to produce paintable Class A surface parts at lower cost for niche volumes production 13

15 Quickstep Aerospace Quickstep is completing commissioning of its first Qure machine for ORPE Technologiya in FY16 ORPE Technologiya» First commercial sale of Qure technology achieved in FY15 Integrated, assembled, tested and approved by customer Delivery & installation in FY16» Significant cost savings for customer Estimated at 10% of the capital cost of traditional Autoclave process and 33% of operating costs» Strong endorsement of Quickstep s Qure process» In discussions with firms in USA, Europe and Asia (including China) Divisional outlook and strategic objectives» Qualification of Qure and RST processes» Target unmanned aircraft, light aircraft and sports aircraft markets in FY16» Commercial aircraft applications currently under negotiation 14

16 Quickstep Systems Quickstep continues to enhance its patented composite manufacturing technologies ure Process» Out of Autoclave process for Aerospace/Defence as replacement for Autoclave Low-niche volume manufacturing of large flat panel components Also suitable for premium automotive applications Rapid ure Process» Next generation Qure process capable of mass production (>50,000 parts p.a.)» Will provide an alternative to automotive industry s resin transfer moulding and compression moulding Divisional outlook and strategic objectives» Full industrialisation of proprietary Qure and RST processes» Development of next generation RapidQure technology» Further expand strategic relationship with Deakin University 15

17 Quickstep Summary Advanced Manufacturing, Smart Technology in one Aerospace Manufacturing» Aerospace manufacturing business with strong barriers to entry and 20 year manufacturing contracts» C130 is now up to rate for first time, which will drive profitability and positive operating cash flow» JSF contracted growth expecting 3 fold increase over the next 3 years Quickstep Aerospace» Qure parts manufacturing contracts for aircraft opportunities in quotation» Increasing the production flexibility of our machines to reduce cost and improve margin with further development in fibres and resins Quickstep Automotive» Technology accepted and to be implemented on recently announced Hawkei program» Waurn Ponds being set up to deliver Phase 1 Auto contracts in all target products, working with multiple local & global customers Quickstep Systems» R&D relocated to Australia and Technology relationship with Deakin University for new material and process developments strengthened 16