MEDICAL LABORATORY SCIENCE EQUIPMENTS DEPARTMENT OF PATHOLOGY AND MEDICAL LABORATORY SCIENCE

Transcription

1 MEDICAL LABORATORY SCIENCE EQUIPMENTS DEPARTMENT OF PATHOLOGY AND MEDICAL LABORATORY SCIENCE Equipment Specifications Quantity required CO incubators Certifications/Compliance UL, cul, CE CO Concentration Control ±0.% at 5% Cabinet Material 8-gauge, cold-rolled steel Chamber Material Polished stainless-steel interior with coved corners CO Concentration Range 0 to 0% O Incubators Water Bath Stainless steel lined, 4 shelves, approx x 50mm (H). Temperature controller with digital readout, 40 vol. Capacity: 80 litres Internal Dims (WxDxH mm): 600x350x350 (useable) External Dims (WxDxH mm): 880x460x5 Temperture Uniformity: ±0. C Optional Gable Lids: Gable lid fitter Weight (kg): 40 3 Autoclave (The Astell 'Duaclave' Autoclave) The Duaclave (two identical chambers, one directly above the other) includes: Holdwarm / Delayed Start Timed Free Steaming Base Shelf in each chamber Ultra Quick Swiftlock Door Mechanism 43 litres

2 Bacti- cinerator Hematocit Centrifuge Automated Coagulation and Factor assay Analyzer Conveniently and efficiently sterilize inoculating loops, needles and culture tube mouths with these sterilizers Flameless electric operation safeguards personnel Small footprint Loop holder HT Rotor Max. Capacity: 30 x capillary tubes Max. Speed:,000 rpm Max. RCF : 5,000 xg Dimensions, Weight: 3 x 39 x 7 cm (WxDxH), kg Power Requirements: 0V0%, 0A, 0~30V0%, 6A, 50/60H Test Principle: nephelometric analysis Wavelength: 470nm Light Source: cold lamp with high brightness and long lifetime Detector: unique dispersion light detector with high sensitivity and repeatability, immunized the effect on result of jaundice, hemolysis, chyle and turbidity on plasma Test Channel: four channel, each channel is independent, one or four, same or different items can be tested simultaneously Incubator: provide reagent and sample incubator Incubator Temperature: 37±0. Reagent volume: 40μL/ Sample volume: 40μL Memory: save more than 0000 samples results, auto recovering results when power is off during working 0 Tissue Floatation Bath Max Temperature ( C)70 Min Temperature ( C)30 Power (VAC)30 Power (Hz)50/60 DescriptionTissue float bath; 30VAC, 50/60H

3 Histology Tissue Processor (KD-TS6B, Automatic Vacuum Tissue Processor) Steps of processing tissue: steps. Glass containers: 9 with capacity of.l each. Wax cups: 3 with capacity of L each. Temperature range: 45~85C±3 Process: Each cup working hours between 0-59hr59min. Delay process: 0-59hrs59min. Vacuum: 0.053Mpa. Vertically reciprocal motion of tissue basket: 3 times/min. Tissue basket specification: Barrel tissue basket- 95x80mm. Layer nacelle- 95x80mm, Five layers. Weight: <60kg. External dimension: (diameter) 660 x (high)550 x 680(Tip top) mm. Rated voltage: 0V, 50Hz or 0V, 60Hz Tissue Embedding and Cooling System Embedding center: Paraffin Chamber Capacity 6 liters Temperature Ranges RT - 85 C Temperature Control Precision ±% Paraffin Flow Control Cooling system: Temperature Ranges of Cryo Module Temperature setting of Cryo Module Paraffin flow control via finger touch plate and optional foot pedal 0 to -0 C the optimal working temperature is

4 Hematology Analyzer (5 populations hematology analyzer / 9-parameter / automated / benchtop) approximately -0 C, and the temperature is under delay protection Characteristics Performance: in 5 populations, 9-parameter Operation: automated Other characteristics:bench-top, with auto-sampler, with cap-piercing system, flow cytometry, laser flow cytometry ID-Centrifuge L Description 5-part differentiation, 9 parameters, one 3D scatter gram, three D scattergrams and three histograms, Flow Cytometry (FCM), Semi-conductor Laser scatter, chemical dye method, independent Basophil channel Only 0ul sampling volume with Up to 80 samples per hour 3 counting modes: venous blood, capillary blood and prediluted Capability to flag abnormal samples Only one centrifuge for tubes and ID-Cards Automatic detection of the head type New head for post transportation card centrifugation with adapted program (5 minutes at 85 g) 8 tube capacity Panel PC touch-screen with easy to use interface (icon based) 4 compatible centrifuge heads Multi-language software CE compliant according to IVD Directive 98/79/EC ID-Incubator L incubator for both tubes and ID-Cards Independent incubation areas (ID-Cards and/or tubes) Up to 36 ID-Card and 4 tube capacity Panel PC touch-screen with easy-to-use interface (icon based) Multi-language software Batch specific timers (3 for ID-Cards, for tubes)

5 Standard program: 5 minutes at 37 C Programmable incubation time CE compliant according to IVD Directive 98/79/EC Gel Doc ABG analyzer (RAPIDPoint 500 Systems) Hardware Specifications Maxi sample size Maxi image area Excitation source 8 x 36 cm 9.4 x 6 cm Epi-white light and trans-uv (30 nm) are standard (optional 365 nm lamp available); optional trans-white conversion screen and XcitaBlue UV/blue conversion screen available Illumination control 3 modes (trans-uv, trans white, epi-white) Image resolution Filter holder Emission filters Automation Capabilities Workflow automated execution Workflow reproducibility Autofocus (patent pending) 4 megapixels 3 positions ( for filters, without filter) included (standard), 3 optional Controlled by a protocol via application specific setup for image area, illumination source, filter, analysis, and reporting 00% repeatability via recallable protocols; from image capture to quantitative analysis and reports Precalibrated focus for any zoom setting or sample height Image flat fielding** Dynamic; precalibrated and optimized per application Autoexposure Sample Size Syringe: 00 µl Capillary: 00 µl user-defined modes (intense or faint bands)

6 Time to Results: Approximately 60 seconds QC/AQC Automatic QC or ampule 3 levels of independent quality control solutions Customizeable QC schedule External Interfaces Universal Serial Bus (USB) 3 Ports RS3 port 0Base T Ethernet Barcode scanner