The National Institute of Engineering, Mysore FACULTY PROFILE

Transcription

1 01. Name of the Faculty [in Block Letters] The National Institute of Engineering, Mysore FACULTY PROFILE DR. Y S VARADARAJAN 02. Date of Birth DD MM YYYY 03. Sex Male Female 04. Designation 05. Department 06. Date of Joining NIE 07. Phone 08. Educational Qualifications a) At the time of joining NIE Professor Industrial & Production Engineering 6/10/1986 Office Residence Mobile ID varadarajan.ys@gma il.com Sl. Degree Subjects/Specialization Class/Grade Year of University Obtained Passing 1 BE Mechanical Engg. First Class 1984 University of with Mysore distinction b) Additional Qualifications acquired during your service in NIE Sl. Degree Subjects/Specialization Class/Grade Year of University Obtained Passing 1 M.Tech M/c tools CGPA: IIT Madras, out of 10 Chennai 2 Ph.D Manufacturing IIT MADRAS, Chennai 09. Positions held after joining NIE (Academic/Administrative/Others) Sl. Name of the Position of From To Institution/University Years 1 Lecturer 06 06/10/ /10/ Senior Lecturer 05 06/10/ /01/ Selection Grade Lecturer 06 05/01/ /01/ Asst. professor Regular - 29/01/2007 Till date NIE, Mysore 5 Professor (CAS) - 06/10/2003 Till date 6 Head of the Department of 07 Oct Dec I&P Engg. 7 Professor - 01/01/2013 Till date

2 10. Number of Candidates Awarded M.Sc., (By Research) & Ph.D. Degrees under your Guidance Sl. Name of the Candidate Title of the Thesis Degree Date of University Awarded Award 1 K M Subbaiah Study of Tribological Behavior of Polymer Composites Ph.D K Sudarshan A study on Tribological behaviour of Ph.D 2015 VTU, Rao Composite Materials Belagavi 3 B R Vijay Study on mechanical characterization M.Sc of wear behaviour of fiber reinforced 2014 polymer composites with and without filler 11. Number of Candidates Presently Working for M.Sc., (By Research) &Ph.D. Degree under your Guidance Sl. Name of the Candidate Degree for Title of the Thesis Commence Probable which ment Date of Registered Year Submission Ph.D Significance of the type of Reinforcement on the 1 Mr. Sridhar D.R response of polymeric 2014 composites to severe working environment A study on the failure modes Ph.D of gas turbine blades through 2015 mathematical models Maadhu G 2

3 12. Research Publications [Enclose Abstract and Full Paper] a) National Journals Sl. Title of the Paper Name of the Journal Volume Issue Page Year Nos. Artificial neural network approach for the Indian journal of engineering 1 prediction of abrasive & materials sciences,, wear behavior of carbon vol fabric reinforced epoxy composite b) International Journals Sl. Volume Issue Page Title of the Paper Name of the Journal Nos. Mechanical behavior of Journal of Automation Graphite filled and 1 unfilled carbon epoxy and Autonomous systems composite Year Investigation of the 2 abrasive wear behavior Journal of Mechanical of graphite filled Engineering and carbon fabric Technology (IJMET), reinforced epoxy composite a taguchi 3 Prediction of abrasive wear behavior of Journal of Material carbon fabric Processing and reinforced epoxy Technology Communicated composites using Taguchi Analysis and Analysis of Abrasive Wear Behavior of Carbon Fabric Reinforced Epoxy 4 Composite Using Taguchi Method - International Journal of pp , Advanced Materials Science,, Vol. 4 3, 2013 Artificial Neural Network Approach for the 5 Prediction of Abrasive Wear Behavior of Carbon Fabric Reinforced Epoxy Indian Journal of Engineering Composite & Materials Sciences Grey-based Taguchi approach for wear 6 assessment of SiC filled carbon-epoxy composites, Materials and Design, volume-41, pp

4 Mechanical Behavior of 7 graphite filled and unfilled Journal of automation and carbon epoxy composite, autonomous system volume-3, Taguchi Approach For Characterization Of Three Body Abrasive Wear Of 11 Carbon-Epoxy Composite With And Without Sic Filler, Composite Interface volume 19,, pp Analysis of abrasive wear behavior of carbon fabric 12 reinforced epoxy composite using International journal of TAGUCHI method, advanced material science volume-4,. pp: International Journal of 13 Implementation of PullResearch Science & System using KANBAN,, Management vol2,, issu2 6 pg 48-53, May 2015 To Arrive at solution for Profile distortion problem encountered during heat 14 treatment process of gear International journal of manufacturing using root innovative research in science, cause analysis, engineering and technology,, Vol 4, Issue 5 May 2015 An impact of Packaging in supply chain system forinternational Journal of 15 automobile industriesengineering, Improving the IEAE- logistic efficiency by reducing weight for the plastic bin, -. Vol. 2 Issue 5 May 2016 Enhancing the logistic 16 performance in International Journal for Manufacturing industry Science and Advance Research in Technology vol.2, Issue 6 - June 2016 Enhancing the logistic International Journal for performance in Science and Advance Manufacturing Industry Research in Technology 17 International Journal for Science and Advance Research in Technology vol.2, Issue 6 - June 2016 To Arrive at Solution for International Journal of Vol. 4 Issue No 9 pp 8287-, Sept Root Step Problem Innovative Research in 8295 Occurring During Science, Engineering and Technology Shaving Operation of 18 Gear Manufacturing Process Using Root Cause Analysis

5

6 13. Books Published Sl. Year of Title of the Chapter/Book Name of the Publisher Publication Details of Research Activities [Funds received for Research projects] a) Funded Research Projects completed Sl. Title of the Research Project Funding Agency Amount Duration Year (From To) Optimization of drilling parameters Visvesvaraya for Nano-filler reinforced Polymeric Technological Jan University, 02 years To Composites for Aerospace & Lakhs Belgaum, Jan Automotive Applications Karnataka Optimization of Mechanical & Tribological Properties of Dec Micro/Nano Filler Filled Polymer AICTE, New to 2 Composites for Automotive Delhi 8,50,000/- 02 years 2015 b) On-going Funded Research Projects Sl. Title of the Research Project Funding Amount Duration Commencement Agency Year

7 15. Conference/Seminars/Workshops Attended a) National Conferences/Seminars/Workshops Sl. Details of Conferences/Seminars/Workshops Dates Sponsoring Agency (From To) Pratibimb National level paper presentation April, TEQIP-II sponsored two day workshop on April, 2016 TEQIP LEAN towards world class manufacturing -II One day Workshop on Smart manufacturing 3 supply chain-innovations 6 th November 2015 for India, in India, by TEQIP India -II 4 One Week Faculty development programme :15 th October to 19 th TEQIP Advances in Manufacturing October II One day workshop on Tools and Techniques in TEQIP 5 Lean Manufacturing 28 th March II One Day Workshop on Process Optimization 6 Using Lean Tools 22 nd April, 2014 TEQIP -II 7 Two Day Workshop on Lean Practices in 27 th and 28 th September, TEQIP Manufacturing Systems II a) International Conferences/Seminars/Workshops Sl. Details of Conferences/Seminars/Workshops Dates Sponsoring Agency (From To)

8 16. Conference/Seminars/Workshops Papers Presented [Enclose Abstract & Full Paper] a) National Conferences/Seminars/Workshops Sl. Details of Conferences/ Presented Papers (Title of Dates Sponsoring Seminars/Workshops the Paper Presented) (From To) Agency A study on packaging in 1 PRATIBIMB 2016 supply chain system for automobile Industries April, 2016 Freight cost reduction in 2 PRATIBIMB 2016 manufacturing industry April, by why-why analysis 2016 TEQIP-II b) International Conferences/Seminars/Workshops Sl. Details of Conferences/Seminars/ Presented Papers (Title of the Dates Sponsoring Workshops Paper Presented) (From To) Agency International conference on Optimization of tribological 3 rd to 4 th Advanced Materials, properties of carbon fiber May Manufacturing, Management and reinforced epoxy composites Thermal Science [AMMMT 2013], filled with nano and micro from held at Siddaganga Institute hybrid filler (Al2O3+SiC) of Technology, Tumkur. Quality Improvement During Camshaft International Journal of 2 Keyway Tightening Using Shainin Scientific and Research Approach, Publications, Vol 4, July 2014 Artificial Neural Network Approach For The Prediction Of Abrasive Wear 3 Behaviour Of Carbon Fabric Reinforced Indian Journal Of Epoxy Composite, Engineering & Materials Sciences, Vol 21, 16-22, 2014 Abrasive Wear Behavior Of TeflonInternational Conference on 4 Filled Ployamide 6 With Short GlassCurrent trends in Engineering and 17-19th July, Fiber And Particulate Fillers,, Management 2014 International Conference on Optimization of Tribological Properties Advanced Materials, 5 of Carbon Fiber Reinforced Epoxy Manufacturing, Management and Composites Filled with Nano and Micro Thermal Sciences (AMMMT 3 4 th May Hybrid Fillers ( Al 2 O 3 + SiC) 2013), 2013 International conference on Study of Tribological Properties ofadvanced Materials, 6 Micro/ Nano Alumina Filled Glass Fiber Manufacturing, Management & Reinforced Epoxy Composites - Thermal Sciences (AMMMT May-03-04, 2013), 2013

9 17. Conference/Seminars/Workshops Organized a) National Conferences/Seminars/Workshops Sl. Details of Conferences/ No of Participants Dates Sponsoring Seminars/Workshops (From To) Agency Refrigeration and air Conditioning Systems Operation, maintenance, 30 15/11/2011 ISHRAE 1 Servicing and Capacity Measurement 2 PRATIBIMB /05/2012 NIE, MYSORE Five day faculty development programme 30 October 15-19, 3 on Advances in Manufacturing 2015 TEQIP-II b) International Conferences/Seminars/Workshops Sl. Details of Conferences/Seminars/ No of Participants Dates Sponsoring Workshops (From To) Agency Refresher Courses/Orientation Programs/Training Programs Attended Sl. Details of Refresher Courses/Orientation Attended as Resource Duration Sponsoring Programs/Training Programs Person/Participant (From To) Agency 19. Refresher Courses/Orientation Programs/Training Programs Organized Sl. Details of Refresher Courses/Orientation No of Participants Duration Sponsoring Programs/Training Programs (From To) Agency 20. Assignments/Deputations to Outside Institutions/Universities Sl. Nature of Assignment Institution/University Duration Sponsoring where Assignment taken (From To) Agency 21. Honours/Awards/Distinction Received Sl. Details of Honours/Awards/Distinction Conferring Agency Date of Award Received - - -

10 22. Membership in Professional Bodies/University Bodies/Organizations Sl. Type of Membership Professional Bodies/Organizations/ Period of Membership University Bodies/Others 1 Member Board of studies, VTU Belgaum 02 years 2 Member Board of Examiners, VTU Belgaum 02 years Chairman, Chairman, Life Member Board of studies in I&P Engineering, NIE, Mysore Board of examiners in I&P Engineering, NIE, Mysore Indian Society for Technical Education 04 years 04 years Board of studies, PES College of Engg. 6 Member Mandya 02 years 7 Member Board of studies, RVCE, Bangaluru 02 years Life 23. Patents Registered Sl. Name of the Invention Date of Application Date of Patent Patent Number Application Number Awarded