IMRT software design goals

Transcription

1 IMRT software design goals Joe Deasy, Beong Choi, and Dan Low Washington University in St. Louis

2 IMRT software design goals Clinical relevance of parameters and plan model Steerability of plan changes in next plan iteration or at tweaking phase Efficiency/speed of feasible solution generation in a plan iteration Dosimetrically faithful and delivery-time-efficient leaf segmentation Accuracy, likelihood of arriving at the global optimimum to within a target %.

3 Research goals in IMRT treatment planning Improve the clinical relevance of the prescription method. That is, make the IMRT or 3DCRT treatment planning statement more relevant to the clinical objectives, stated in terms of outcome goals (TCP or NTCP) or dosimetric goals (dose limits, dose volume constraints). Improve the responsiveness or steerability of IMRT treatment planning. That is, we want to improve the likelihood that a change to the planning algorithm input data will result in a predictable change in the resulting dose distribution.

4 Current paradigm Input algorithm parameters: Hard constraints, objective function weights. Solve an optimization problem Review: is this the best plan possible? & is it clinically acceptable? If no to either, change input and re-run. Prioritized prescription optimization Input prioritized prescription planning objectives Solve a series of optimization problems which add the next lower priority goal at each iteration. Higher priority goals are constraints in lower priority iterations. Review: was the prescription statement appropriate? & is the resulting plan clinically acceptable? If no to either, change input and re-run.

5 Prioritized treatment goals Prioritization of the prescription goals avoids tradeoffs among objectives which are difficult to control and sometimes clinically undesirable avoids fixing hard constraints to be more restrictive than necessary allows for more factors to be included in the prescription goals without degrading the most important goals. An optimization engine for prioritized prescription goals has been designed and implemented (PriOpt). Goals are incorporated iteratively. The planning engine is applicable to both IMRT and non-imrt optimization.

6 Objectives Improve the clinical relevance of the optimization input data specification. That is, make the IMRT or 3DCRT treatment planning statement more relevant to clinical objectives, stated in numerical terms of outcome goals (TCP or NTCP) or dosimetric goals (dose limits, dose volume constraints). Improve the responsiveness or steerability of optimized treatment planning. That is, we want to improve the likelihood that a change to the planning algorithm input data will result in a predictable change in the resulting dose distribution.

7 Method (overview) Prioritize the prescription goals. Prioritization avoids tradeoffs among soft-constraints which are difficult to control and sometimes clinically undesirable. Prioritization also avoids suboptimally fixing hard constraint limits which could happen if multiple goals are incorporated up-front as hard constraints. We designed and implemented an optimization engine for prioritized prescription goals. As discussed below, goals are incorporated iteratively, in the order of their prescription-stated priority. The planning engine is applicable to both IMRT and non- IMRT optimization.

8 Motivation Without prioritized input prescriptions, there is no way to enforce such simple prescription statements as: Primary goal: hold the spinal cord dose to < 45 Gy, Secondary goal: then increase the minimum PTV dose as much as possible, Tertiary goal: then increase cell kill to the PTV as much as possible. Why? Because there is no a priori way to know the best minimum PTV dose when the maximum dose to the spinal cord is 45 Gy.

9 2-D Test problem

10 6 MV PBs, 2 cm wide, 0.4 cm voxels, 7 Ports Hard Constraint: Dmax to the convex ROI < 45 Gy. Candidate goal: Dmin to the concave ROI > 80 Gy. Base: Minimize quadratic sum of doses to non-roi regions.

11 Hard Constraint: Dose to the convex ROI < 45 Gy. Hard Constraint: Dose to the concave ROI > 52 Gy. Candidate goal: Dmax to the concave ROI < 90 Gy. Base: Minimize quadratic sum of doses to non ROI regions.

12 Hard Constraint: Dose to the convex ROI < 45 Gy. Hard Constraint: Dose to the concave ROI > 52 Gy. Hard Constraint: Dose to the concave ROI < 90 Gy. Candidate goal: Minimize mean cell survival in the concave ROI. Base: Minimize quadratic sum of doses to non-roi regions.

13 Hard Constraint: Dose to the convex ROI < 45 Gy. Hard Constraint: Dose to the concave ROI > 52 Gy. Hard Constraint: Dose to the concave ROI < 90 Gy. Hard Constraint: cell survival < 2.1 x 10e-8 in the concave ROI. Candidate goal: Maximize the mean dose to the concave ROI. Base: Minimize quadratic sum of doses to non-roi regions.

14 Gee, isn t this just pre-emptive goal programming?

15 Prioritized optimization conclusions Prioritized prescription optimization introduces novel flexibility into the prescription statement. We hypothesize that: prioritized goal prescriptions allows for more clinically relevant statements of the treatment planning problem, including acceptable tradeoffs, compared to current (non-hierarchical) prescription statements methods. A more clinically relevant problem statement is likely to lead to fewer back to the computer plan iterations.

16 The tweaking phase May need a different user interface than the initial algorithm inputs (Pollock, Henderson) Initial phase planning phase could be with simplified functions (Lee).

17 Isolated tradeoffs: a key missing capability of IMRT planning systems (1/2) What if the target cold spot is too large? Or a normal tissue hot spot is too hot? Where will we sacrifice/tradeoff dose to make the desired improvement? How can we control the tradeoff? The system must be capable of constraining doses to other normal structures do they don t degrade as the tradeoff is made.

18 Isolated tradeoffs: a key missing capability of IMRT planning systems (2/2) This can be accomplished with constrained optimization algorithms Will be key to make plan modifications predictable: What will happen if I In turn isolated tradeoffs and the resulting predictability will be key to allow users to learn from experience, thereby decreasing trial-and-error in planning.

19 Dose-volume constraints imply multiple-local minima Suppose the green critical structure has a volume effect represented by dose-volume constraints Where do we put the hottest regions/where do we put the coldest regions? Longitudinal axis

20 Plan-then-segment? We are pursuing a plan-then-segment approach (commonly used now) instead of a plan-with-segments (Hyperion) approach.

21 Why use plan-then-segment? It can look for the best plan without assumptions regarding segment shapes It will probably be faster than modifying segments The amount of degradation due to segmentation could be controlled (i.e. add more segments to get within 2% dose degradation everywhere)

22 Why use plan-then-segment? Current segmenters only try to match the fluence profile for each beam, we propose matching the dose distribution, which is a much more relaxed goal. In collaboration with Eva Lee of Georgia Tech

23 IMRT algorithm tradeoffs Number of planning iterations needed Clinical relevance of model and parameters Model complexity/intractability Max desired operator time Model iteration compute time

24 Parallel clusters To show multiple feasible solutions with different plan parameters (sensitivity analysis). To speed up optimization. To speed up dose computation using accurate methods (Monte Carlo)

25 IMRT software design goals Clinical relevance of parameters and plan model Steerability of plan changes in next plan iteration or at tweaking phase Efficiency/speed of feasible solution generation in a plan iteration Dosimetrically faithful and delivery-time-efficient leaf segmentation Accuracy, likelihood of arriving at the global optimimum to within a target %.