CV Format. School of Mechanical and Nuclear Engineering. systems for deep mines Performance enhancing elements for an 18 m class glider

Transcription

1 CV Format PARTICULARS OF LECTURER Name Initials Surname Current organisation Faculty or School Department Work telephone number code Work fax number Mobile number address ADDITIONAL DETAILS Dr Attie AS Jonker NWU Engineering School of Mechanical and Nuclear Engineering Highest qualification (e.g. PhD, MSc etc.) Ph.D Engineering Year obtained 2011 of thesis (Masters Degree) An Investigation into the life-cycle cost of a vacuum-ice cooling systems for deep mines for thesis (PhD) Performance enhancing elements for an 18 m class glider QUALIFICATIONS Please fill in all your qualifications (your entire qualifications history), i.e. list your diplomas and/or degrees (e.g. BSc, MSc etc.) obtained and those for which you are currently registered for. Degree/ Field of study Institution Year Distinction Completed Diploma obtained B.Sc Mathematics PU for CHE 1991 Y Y B.Eng Mechanical PU for CHE 1993 Y Y M.Eng Mechanical PU for CHE 1997 Y Y Ph.D Mechanical NWU 2011 N Y CAREER PROFILE Please list all the positions you have held in the past (including non-academic positions where applicable), as well as your current position. Position Organisation Full-time/ part-time Contract position From To Current** Lecturer PU vir CHO Full-time Y Snr. Lecturer NWU Full-time 2000 Current Y ** For your current position, the Period to is not required. RESEARCH EXPERTISE Fields of specialisation Please include at least one but not more than ten specialisation fields in order of priority (one specialisation per line). 1. Finite element methods 2. Strength of Materials 3. Composite materials 4. Machine Design 5. Aerodynamics 6. Aircraft design 7. Structural design 8. Flight testing 1

2 RESEARCH OUTPUTS Important issues regarding research outputs Please provide full references of your research outputs under the headings below. a. Books/Chapters in Books Year b. Refereed/Peer-reviewed Articles in Journals (Please fill in one per Article) Jonker AS. & Greyvenstein GP Kessel FA & Jonker AS Simulation investigation into the comparative performance of different vacuum ice refrigeration systems and a conventional ammonia system for the cooling of deep mines, R&D Journal 2 1/2D flow modeling of resin infusion under flexible tooling using unstructured meshes. Applied Science and Manufacturing Kessel FA & Jonker AS Optimising the flow pipe arrangement for resin infusion under flexible tooling. Applied Science and Manufacturing c. Conference outputs Contributions to conferences that have been published in book form must be included in this section and not in section a - Books/Chapters in books. JONKER, A.S., JORDAAN, P.W., BOSMAN, J., NEETHLING,R. S An investigation into Navier-Stokes solution of the flow around wing-body geometries. 26 OSTIV Conference, Bayreuth, Germany, August JORDAAN, P.W., JONKER, A.S A CAD interface for the fast design of glider geometries. 26 OSTIV Conference, Bayreuth, Germany, August 2

3 JONKER,A.S Control system design using spreadsheets. 27 OSTIV Conference, Mafeking, South Africa BOSMAN, J.J. & JONKER, A.S Aerodynamic design of an 18m class glider wing. 27 OSTIV Conference, Mafikeng, South Africa. BOSMAN, J.J. & JONKER, A.S. Inexpensive computer program for the manufacturing of glider wing moulds. 27 OSTIV Conference, Mafikeng, South Africa. A.S.Jonker, J.J. Bosman, Experimantal investigation into boundary layer control with two rows of blow holes. SACAM 2006, Cape Town January 2006 Year 2003 J.J. Bosman, A.S. Jonker J.A. de Bruyn., The Aerodynamica and structural design of a 1 KW Wind turbine blade. World Wind Energy Converence, Cape Town A.S. Jonker Control system design using Spreadsheets. SACAM 2006, Cape Town January 2006 Joost F. A. Kessels, Attie S. Jonker, 3

4 2 1/2 D flow modeling of resin infusion under flexible tooling using unstructured meshes. Fifth South African Conference on Computational and Applied Mechanics, SACAM06, Cape Town, January 2006, Joost F. A. Kessels, Attie S. Jonker Modelling and Optimising the flow pipe Year 2008 A.S.Jonker, arrangement for Resin Infusion under Flexible Tooling, Sixth International Conference on Composite Science and Technology, ICCST'06, Durban January 2007 The development of the JS1 Glider. 29 th OSTIV Conference, Lusse Germany, July 2008 Year 2009 A.S.Jonker, Certification testing of the JS1 glider. Dutch Gliding Conference. November 2009 Year 2010 A.S. Jonker Year 2010 A.S. Jonker, J. J., Bosman, Technology developments at JS. American Soaring Conference. Little Rock, USA, February The effect of water absorption on the structural properties of composites, 30 th OSTIV Conference, Szeged, Hungary Year 2012 A.S.Jonker, J.J., Bosman, Numerical investigation of the flow over a glider canopy, 31 st Uvlade USA, OSTIV Conference, d. Patents 4

5 of Patent Application Date of Application/Grant Inventor(s)/ Applicant/Assignee Country Patent Application/ Patent Number Choose One 1) Provisional patent application 2) Complete patent application (including PCT application) 3) Granted patent Abstract & description of unmet market needs e. Other Recognised Research Outputs These include any other measurable research outputs that clearly embody new or substantially developed insights, for example, annotated bibliographies, catalogues, musical scores, paintings, contributions to major research databases, development and production of software, dictionaries, electronic publications, plantbreeding rights, research guides, scholarly editions, vaccines, etc. For all these research outputs concise descriptions must be included with particular reference to the contribution to new knowledge and insights. 5