UniCam Multimode Standard-Performance Connectors: SC and ST Compatible

Transcription

1 Features and Benefits Continuity test set Immediate go/no-go feedback Factory-polished end face Consistent optical performance Fast termination and no consumables Low installation cost Factory tested Minimum insertion loss Performance guaranteed 100 percent yield guarantee Corning Cable Systems UniCam Multimode Standardperformance Connectors offer optical performance in a fast, easy field-termination solution ideal for fiber-to-the-workstation applications where setup and teardown time is critical. The high-precision mechanical splice technology enables fiber optic networks to be installed quickly and cost effectively. The lightweight, hand-held installation tool and high-performance precision cleaver virtually eliminate human variability during installation, ensuring terminations are right the first time, every time. This kit was designed with consideration for network installers, from the cleaver, with its intuitive, hand-held precision design and dual-clamp precision hold, to the installation tool, with its immediate go/no-go feedback signal indicating proper mating of the field fiber to the fiber stub. Installation is as easy as strip, clean, cleave, cam and crimp, with exceptional optical performance assured. Every UniCam Connector is assured to meet the published specification at the time of installation or Corning Cable Systems will replace it. UniCam MM Standard Connectors SC and ST Compatible Photo LAN4380 UniCam MM Organizer Packs SC and ST Compatible Photo LAN4379 Page 1 Revision date

2 Specifications SC SC ST Compatible ST Compatible Fiber Category 62.5 µm MM (OM1) 50 µm MM (OM2) 62.5 µm MM (OM1) 50 µm MM (OM2) Insertion Loss, Typical Insertion Loss, Max. Reflectance Housing Color Boot Color 0.3 db 0.75 db -26 db Beige Beige 0.3 db 0.75 db -26 db Black Black 0.3 db 0.75 db -26 db Amber Beige 0.3 db 0.75 db -26 db Amber Black Operating Temperature Intermateability Qualification Durability Tensile Strength Jacketed Cable Tensile Strength 900 µm Cable 0 C to 60 C meets TIA/EIA 568-B.3 Connectors are FOCIS compliant with TIA/EIA (SC) and TIA/EIA (ST Compatible) Compliant with EIA/TIA 568-B db change by 500 rematings, FOTP lb, change 0.2 db, FOTP lb, change 0.2 db, FOTP-6 SC Connectors Ordering Information Part Number Description Units per Unicam SC Connector, 62.5 µm multimode, ceramic ferrule, logo, single pack Z UniCam SC Connector, 62.5 µm multimode, ceramic ferrule, logo, organizer 25/1 pack UniCam SC Connector, 50 µm multimode, ceramic ferrule, logo, single pack Z UniCam SC Connector, 50 µm multimode, ceramic ferrule, logo, organizer pack 25/1 Note: Organizer packs are packs of 25 unassembled UniCam Connectors separated into components and 900 µm boots only. If the use of 2.9 mm boots is required, please purchase the single pack UniCam Connectors. Page 2 Revision date

3 ST Compatible Connectors Ordering Information Part Number Description Units per UniCam ST Compatible Connector, 62.5 µm multimode, ceramic ferrule, logo, single pack Z UniCam ST Compatible Connector, 62.5 µm multimode, ceramic ferrule, logo, 25/1 organizer pack UniCam ST Compatible Connector, 50 µm multimode, ceramic ferrule, logo, single pack Z UniCam ST Compatible Connector, 50 µm multimode, ceramic ferrule, logo, organizer pack 25/1 Note: Organizer packs are packs of 25 unassembled UniCam Connectors separated into components and 900 µm boots only. If the use of 2.9 mm boots is required, please purchase the single pack UniCam Connectors. Page 3 Revision date

4 Tool Kits and Accessories Part Number Product Description Units per TKT-UNICAM-PFC UniCam High-performance Tool Kit: includes Highperformance Installation Tool for termination of multimode and single-mode LC, SC and ST Compatible Connectors; includes High-performance Precision Flat Cleaver, 1.25 and 2.50 mm VFL ferrule adapters and all required fiber preparation, cleaning tools and materials TKT-UNICAM Standard Installation Tool Kit for single-fiber UniCam Connectors, terminates LC, SC and ST Compatible Connectors; includes FBC-002 basic cleaver, continuity test set (CTS) with adapters; includes all required fiber preparation, cleaning tools and materials FBC BLADE Replacement Diamond Blade for the High-performance Precision Flat Cleaver HAN-TRACK Fiber Handlers and Track for UniCam and OptiSnap Flat Cleavers HAN-UNI 900 µm Fan-out Tubing Handler for FBC-007 and FBC-009 HAN-STANDARD Double-sided Fiber Handler for tight-buffered 900 µm and jacketed cable for UniCam and OptiSnap Flat Cleavers VFL-A250 SC and ST Compatible VFL Adapter for 2.5 mm ferrules for UniCam High-performance Installation Tool only VFL-AKIT UniCam VFL Adapter Kit for High-performance Installation Tool * Note: Laser light: Do not view directly with optical instruments (magnifiers). Class 1M laser product. Page 4 Revision date

5 Tool Kits and Accessories Part Number Product Description Units per TER-CTS-LC CTS Adapter for UniCam LC Connectors TER-CTS-SC CTS Adapter for UniCam SC Connectors TER-CTS-ST CTS Adapter for UniCam ST Compatible Connectors VFL-350 Visual Fault Locator, 635 nm penlight style TL-UC01 UniCam Standard-performance Installation Tool TL-UCP UniCam High-performance Connector Installation Tool with integrated continuity test set (CTS) * Note: Laser light: Do not view directly with optical instruments (magnifiers). Class 1M laser product. Page 5 Revision date

6 Cleaning Accessories Part Number Product Description Units per FCC-WIPES Lint-free Cleaning Wipes, canister of 90 90/1 FCC-CLEANER-FIBER Fiber Optic Cleaning Fluid, 3 oz can CLEANER-PORT-2.5 Single-fiber Port Cleaner for all 2.5 mm ferruled connectors such as FC, SC and ST Compatible Connectors; effective for PC, UPC and APC polishes * Note: Laser light: Do not view directly with optical instruments (magnifiers). Class 1M laser product. Corning Cable Systems LLC PO Box 489 Hickory, NC USA FAX: International: A complete listing of the trademarks of Corning Cable Systems is available at Corning Cable Systems is ISO 9001 certified Corning Cable Systems. All rights reserved. Page 6 Revision date