NIS/PartsMan PDM - Integration at Fairchild / Dornier

Transcription

1 NIS/PartsMan PDM - Integration at Fairchild / Dornier

2 PDM Architecture Bill of Material (IMS) LMI: L-CABLE-Metaphase- Interface CMI: CATIA-Metaphase Interface PMI: PartsMan-Metaphase Interface CLI: CATIA-L-CABLE-Interface CPI: CATIA-PartsMan-Interface PDI: PartsMan-DOMAS-Interface CAE L-CABLE CLI CADCAM CATIA CPI Standard Parts PartsMan PDI LMI CMI PMI Material data of standard parts PDM Core System Metaphase CM OFFICE LCABLE Document Management DOMAS Transfer of product structure TKZ Management BOM 17/01/2002, Page 2. Externa l Partner s EXTRA N

3 Scope and Objectives Scope Tight co-operation for integration of standard parts between NIS/PartsMan and Metaphase/CMI Objectives Handling of standard parts the same way as usual parts in Metaphase/CMI PDM is Master of all used standard parts, PartsMan provides the pool of available standard parts Transparent allocation of PartsMan standard parts to hierarchical assembly structure in PDM Convenience and ease-of-use of handling standard parts 17/01/2002, Page 3.

4 Interface to Material Data Metaphase Functions: Creation Information Query Release Update Deletion Material data of standard parts PID RF DES YES YES YES NO YES... PartsMan A B C PID RF DES Direct access to material data stored in Metaphase 17/01/2002, Page 4.

5 Geometry-Interface Metaphase Assembly Structure: PartsMan Virtual Geometry Pool: CATIA CMI Session Structure: 2) CMI Assembly Update 1) PartsMan Create 17/01/2002, Page 5.

6 Facts of Solution at Fairchild Dornier Provision of standard part families based on valid external and corporate standards: 4260 families already available 4more than different parts Creation of standard parts geometry in CATIA models (Session) Storage of data in database with direct access to 4geometric-related data in PartsMan and 4material-related data in PDM PartsMan obeys to the parts release flag status managed in PDM Management of material data (TKZ, designator, supplier,...) in PDM: Creation, Update, Query, Info, Release and Deletion Automatic insertion of standard parts model into active assembly Universal expand/collapse feature for all standard parts of an assembly 17/01/2002, Page 6.

7 Introduction of NIS/ PartsMan PDM Phase 1 (CATIA) CATIA Introduction 8Project File 8Start Model PDM Phase 2 (Engineering) CATIA Model Management Engineering Data Management 8Product structure 8Mabagement of part versions 8Integration of standard parts 8Basic Modification Management 8BOM 8Management of gadgets 8Life Cycle 8Master-Interface 17/01/2002, Page 7.

8 Workflow NIS/ PartsMan Catia-Metaphase Selection of standard part in NIS/PartsMan BOM of std. part Creation of 3D standard part geometry and insertion in assembly Introduction of std. part in CATIA workbench 17/01/2002, Page 8.

9 Create standard part object 17/01/2002, Page 9.

10 Browse information of standard part object 17/01/2002, Page 10.

11 Release standard part object 17/01/2002, Page 11.

12 Create attributes of standard part object 17/01/2002, Page 12.

13 Insert standard part object in assembly 17/01/2002, Page 13.

14 Integration of Standard Parts: Update 17/01/2002, Page 14.

15 Integration of Standard Parts: Product Structure 17/01/2002, Page 15.