Overview of STEP AP242 ed1 status of development of AP242 ed2 and related activities of the CAx IF and PDM IF,

Transcription

1 AFNeT prostep ivip STEP AP242 Day 17 October 2018 Airbus, Toulouse Overview of STEP AP242 ed1 status of development of AP242 ed2 and related activities of the CAx IF and PDM IF, Manuel NAGLER, BMW Jean-Yves DELAUNAY, Airbus

2 AP242: the answer to key A&D business requirements for 3D Model Based Definition interoperability 3D Model based design Domains integration (Engineering analysis, 3D NC Manufacturing, 3D Metrology, Process Planning, etc) Customer Manufacturer Supplier data exchange Data sharing on SOA basis Engineering visualization Service providers for exchange and sharing Long term archiving Supplier Certification authorities STEP AP242: Convergence of AP203ed2 and AP214ed3 17 Oct AFNeT prostep ivip STEP AP242 Day 2

3 Scope of ISO STEP AP242 edition 1 (ISO International Standard in 2014) Managed model based 3D engineering 17 Oct AFNeT prostep ivip STEP AP242 Day 3

4 Availability of COTS AP242 CAD 3D converters several converters for most versions of the main CAD systems All main CAD systems vendors commercialize a STEP AP242 e1 interface for Import / Export of CAD 3D exact and 3D tessellated geometry with PMI graphic presentation Dassault Systemes Catia V5 R23, Catia V6 R2013 : DEXPERIENCE R2014 (& following) : 2014 Solidworks R2017 : Oct Siemens PLM: NX V11 : Summer 2016 SolidEdge ST8 : Summer 2016 PTC: CREO Parametric V4 : Nov Autodesk: Inventor 2017 : end 2016 (TBC) At least, 6 integrators commercialize AP242 e1 interfaces for the main CAD systems & versions Core Technologie (Ge) Datakit (Fr) Elysium (Ja) ITI (USA) Theorem Solutions (UK) STEP tools (USA) All main CAD vendors develop or already commercialize an AP242 e1 interface for 3D PMI Semantic for down stream reuse by COTS applications (e.g. NC machining, 3D NC metrology, manufacturing analytics, etc) 17 Oct AFNeT prostep ivip STEP AP242 Day 4

5 Examples of use of STEP AP 242 (and AP214) from Airbus Past (still in use) STEP AP 214 for the conversion of legacy 3D CAD models to CatiaV5 STEP AP 214 for exchange of PDM product structure Present Long Term Archiving of A350 Full 3D definition in STEP AP 242 / AP214 3D DMU data exchange with cabin equipment suppliers 17 Oct AFNeT prostep ivip STEP AP242 Day 5

6 STEP AP242 ed1: COTS solutions available, supported by the CAx and PDM Implementer Forums 17 Oct AFNeT prostep ivip STEP AP242 Day The development of STEP AP242 interoperability capabilities relies on Systems Engineering principles, covering the full life cycle, from Business Requirements to Deployment, with Validation & Verif. methods

7 CAx Implementer Forum: March 15, 2018 Round Table, Asheville, NC, USA Continuation of tests of AP242 ed1 functionalities: 3D PMI semantic Composite Kinematics Status of STEP AP242 interfaces by the main PLM editors: NIST tools update (STEP 3D PMI analyser, STEP AP209 analyser) Dassault Systèmes (Catia V5, 3DEXPERIENCE, SolidWorks, etc.) Siemens PLM (NX, NJT2GO, Femap, SolidEdge, TCVis, etc.) CT CoreTechnologie (3D_Evolution, 3D_Analyzer) Datakit (CrossCAD converter) Elysium (Asfalis converter) Jotne EPM (EXPRESS Data Manager, status of AP242 and AP209 IFs) International TechneGroup - ITI (PDE Lib, CAD IQ, CAD Fix, etc.) Hosted by PDES Inc., AFNeT, & prostep ivip The CAx IF improves STEP AP242 translators quality and decrease translators time-to-market Launch of the CAx IF 3D MBD User Group in 2019 to define industry 3D MBD use cases & test cases

8 CAx-IF: Planned activities for Oct AFNeT prostep ivip STEP AP242 Day Planned scope

9 Overview of PDM Implementor Forum 2018 activities 9 Project supported by AFNeT, & prostep ivip : User Group Start of CONF3 tests, based on the bicycle test case Occurrence Effectivities and Revision Effectivities Full-loop test of a PDM As Designed product structure CAD A -> AP242 XML -> CAD B -> AP242 XML -> CAD A Management of supplier IDs at OEM Covered by VDA Test Case ( toy box car ) Two test rounds in 2018 Implementer Group Full-loop test, based on VDA test case CAD A -> AP242 XML -> CAD B -> AP242 XML -> CAD A Has highlighted the need of recommended practices, since COTS PDM systems have sometimes different internal rules Exchange of basic configuration management data Test case based on specifications documented Interests of the PDM editors to have industry requirements Customization Test Case With PDM Properties as defined by the User Group Harmonization of the collected real-life UDA Results Topics & Ideas Additional Topics & Ideas Updates of the AP242 PDM XML Recommended Practices Using several geometric representations for the same part - Product & Assembly Structure (PAS): V1.99 available (e.g., native & neutral) - Configuration Management: Current working draft: V0.5 Several versions of one part in the same file Enhancement of the testing criteria + new evaluation Sheet Sending of partial PDM product structures Good involvement of the EU manufacturers in the User Group to define common use cases and priorities Good progress of the participating PLM editors, but still need to continue to involve missing PLM editors

10 PDM-IF Test Round 6: CONF1, CONF2 & CONF3 CONF1: AS1 Occurrence Effectivities (Serial No., Date) Two test loops (Initial & after changes) CONF2: Dassault Aviation Biplane Occurrence Effectivities (Serial No., Date) Combined effectivities CONF3: ASD/AIA Freeride Mountain bike test case Include Specifications (similar to options ) Black Include Conditions Support of Revision Effectivities Red 10

11 PDM-IF Tentative Scope for 2019 Topics from User Group: Use Case Visual Issue Management Use Case As built Product Structure Delta Exchange (Elementary Test case) Topics from Implementor Group: Nested files with Configuration Management Sharing of documents between parts (Special case: Handling of Mirrored parts) Versioning of ProductClass (related to full dictionary exchange) Approval status relationship (workflow) ProductConfiguration The general high-level schedule for the Implementor Group shall be kept as in 2018: Two test rounds Two meetings (June / November), at the end of each round. 11

12 Actual PDM IF Use Cases VDA Use Case Business specification finished. Actual: Alignment of test results NEW: VIM Use Case Business Specification ongoing. Plan to finalize until end of the year 2018, prostep ivip e.v. Topic: PDM Implementor Forum (PDM-IF) 12

13 STATUS PDM IF User Group Results Spec of VDA Use Case Spec Of VIM Use Case Highlights New Project Lead PDMIF UG Mirko Theiss Collaboration with CAx-IF and JT-IF for PDM Interoperability led to addition of new section in Rec. Practices New Test Evaluation process in place, to improve communication between IG and UG Impediments Need to SAP and Siemens PLM involved, as well as more user companies. 2018, prostep ivip e.v. Topic: PDM Implementor Forum (PDM-IF) 13

14 STEP Extended Architecture: upward compatibility with STEP legacy + support of new industry requirements Context Product Life Cycle Systems Life Cycle Systems Engineering MBSE : Increasing use of SysML! Increasing importance of electronics and electrical simulation, as part of mechatronics : SysML extension to support Physical Interaction and Signal Flow Simulation specification The answer: To extend the modelling framework of ISO in order to support; - new industrial needs and - evolutions of Information Technologies : web services (e.g. linked data), analytics, visualization, etc The development of ISO AP242 ed2, AP239 ed3 PLCS and AP243 MoSSEC 14 relies on the implementation of the STEP Extended Architecture, in a phased approach 17 Oct AFNeT prostep ivip STEP AP242 Day

15 Overview of the 3 Standing doc. of the STEP Extend. Architecture with updates, to be re submitted to a new ballot in Nov N3210 (2018) STEPLib high level requirements 1 Scope 2 Normative references 3 Terms, definitions and abbreviated terms 4 History, context, objectives & fundamental principles 5 AAM, Domain Model, SysML ARM 6 STEPlib ( requirements ) 7 Annexes extended architecture roadmap N3211 (2018) STEPlib SysML detailed specifications 1. Introduction 2. Scope 3. Normative references 4. Terms, definitions &abbreviated terms 5. Desc. of the diff. components of the architecture 6. SysML constructs and their usage in the STEP Extended Architecture 7. EXPRESS modelling language constructs and their equivalence in STEP Ext.Architecture SysML 8. Bibliography 9. Annexes 9.1Files, Packages and structure of models To be reviewed in ISO /TC 184 /SC4 meeting in Chicago and sent for ballot N3212 (2018) HTML Publication Design Document 1 Scope 2 Normative references 3 Terms, definitions & abbreviated terms 4 Directory structure 5 HTML design 6 Diagrams 7 Bibliography 8 Annexes New content discussed and agreed during the meetings on the & Sept in Jacksonville Extended Architecture Technical Report 1 Scope 2 Normative references 3 Terms, definitions & abbreviated terms 4 N3210:4 : History, context, objectives & fundamental principles 5 N3210:7: Roadmap 6 N3210:6 : STEPLIB 7 N3211:9.2,9.3,9.4

16 Finalization of STEP AP242 edition 2: Planned publication of the International Standard (IS) in Q Other main ENHANCEMENTS: Harmonization with AP239 ed3 for: - PDM / Conf. Managemen - Requirement, Validation & Verification Easier navigation in the HTML documentation of the Domain model 17 Oct AFNeT prostep ivip STEP AP242 Day 16

17 Finalization of STEP AP242 edition 2: Preparation of AP242 ed2 DIS-2 documentation for end of March 2019 AP242 ed2 DIS ballot failed in Sept (6 YES with comments 4 NO with comments ) Org. of a ISO /TC 184/SC 4 Project Planning Committee (PPC) confcal on the 27 Sept. Decision to prepare a 2 nd DIS ballot: Answering to all technical comments of the DIS ballot Preparation of a 2d ballot for the standing docs of the STEP Extended Architecture 17 Strong effort of the AP242 ed2 project team to answer to all DIS ballot comments

18 Example of navigation in the WireOccurence object documentation in the electrical harness capability of AP242 ed2 DIS After the introduction of the capability purpose, there is a list of all model entities composing the capability. SysML diagram Entity documentation Complete view XML view Attributes documentation Oct AFNeT prostep ivip STEP AP242 Day

19 Overview of the AP242 ed2 domain model for Requirement, Validation and Verification Management Key capability to support interoperability of MBSE data: shared with AP233 ed1 Systems Engineering AP239 ed3 Product Life Cycle Support AP2443 MoSSEC 19

20 Industries requirements for the CAx and xdm Implementer Forums : preparation of the launch of the CAx IF 3D MBD WG in 2019 Industry has benefits to prioritize its PLM interoperability requirements and to participate into the Implementer Forum, which organizes interoperability test rounds by the main PLM editors

21 Preparation of STEP AP242 edition 3 project in 2018 and S : planned to start in S STEP AP242 5 years roadmap Version 1 Requirements & uses cases for STEP AP242 edition 3 Tutorials Pilots Development of STEP AP242 edition 3 STEP Architecture and infrastructure STEP Librairies ISO /TC184 /SC 4 gouvernance ISO Roadmap V(1) Based on AP242 ed3 Implementation guidelines STEP AP242 edition 3 Interoperability Benchmark Test Rounds (led by Manufacturers) Enhance Needs for the industries to identify their priorities and plan resources for the contribution to the development of AP242 e3 STEP AP242 ed3 Interop. Test Rounds done by vendors with industry priorities Implementor Forum 17 Oct AFNeT prostep ivip STEP AP242 Day 21

22 17 Oct AFNeT prostep ivip STEP AP242 Day STEP AP242 is complementary to activity models of other ISO STEP standards covering the A&D product life cycle Analyse Product Modify Design of Realized Product AP235 AP209 AP210 AP242 AP209 AP210 simulation request results ECR, ECO product design as modified Design Product Manufacture / Deliver Product Modify Realized Product Systems Engineering AP233 (AP239) AP242 product as required AP209 product as designed AP210 ECR, ECO AP242 AP238 AP235 product as manufactured/ delivered ECR, ECO AP239 product as maintained Design Product Support Solution AP239 Product Support Process AP239 Product Operation AP239

23 Scope overview of the main STEP standards of interest for the A&D STEP AP242 is a modular Application Protocol sharing information models subsets with other STEP APs, allowing to cover key domains of the product life cycle in a consistent way

24 STEP AP209 e2 «Multi-Disciplinary Analysis and design complements STEP AP242 PDM STEP AP 209 SDM SDM : Simulation Data Management CAD : Computer Aided Design CAE : Computer Aided Engineering PDM : Product Data Management 24 CAD Link to STEP AP209 public website CAE Structural analysis for metallic and composite parts, for linear, static and dynamic simulation Computational Fluidic Dynamic Material properties STEP AP242 CAD information model is integrated in STEP AP209, allowing a close associativity between CAD exact model, CAD simplified shape and FE Mesh models

25 LOTAR and the link to ISO STEP AP242 The LOTAR standards rely mainly on ISO product data exchange standard, which includes AP Oct AFNeT prostep ivip STEP AP242 Day 25

26 ISO AP242: the recognized Aerospace & Defense standard for 3D Model Based Definition interoperability 17 Oct AFNeT prostep ivip STEP AP242 Day AP242 is the unique ISO standard which: covers the main MBD Digital Technological Processes Is integrated with: - STEP AP209, for Multi Disciplinary simulation - STEP AP238 STEP-NC, for 3D NC Machining: includes PDM CM interoperability capabilities, harmonized with AP239 for through life cycle support

27 Ongoing activities of ISO /TC 171 /SC 2 and ISO /TC 184 /SC 4 for 3D PDF embedding STEP AP242 for 3D visualization 17 Oct AFNeT prostep ivip STEP AP242 Day

28 Synthesis: AP242, as the cornerstone standard of the A&D industries for 3D Model Based Design and PDM CM interoperability European A&D companies have started to use STEP AP242 in operation for 3D DMU exchange and 3D MBD long term archiving (including PMI) Certification of new aircrafts based on semantic 3D MBD and the introduction of the digital twins require a consistent set of ISO standards to support this digital thread: specification, definition, simulation, manufacturing, quality control, etc ISO AP 242 is the cornerstone standard of for interoperability of core 3D engineering design models Next priorities for 2019: To create of the CAx IF User Groups and of the Electrical Implementer Forum To consolidate the PDM IF activities with configuration management test cases To finalize AP242 e2 in March. 2019, including the harmonization with AP239 e3 To prepare the launch of AP242 e3 in 2019 The coordination of the European A&D standardization activities minimize the total cost of usage of COTS solutions for 3D MB Definition interoperability

29 10/17/ Oct AFNeT prostep ivip STEP AP242 Day

30 CAx-IF: Overview of 2018 activities and deliverables 2 Test Rounds per year Scope Summary of the last round Semantic PMI Representation PMI Tessellated Presentation Alternative Part Shapes AP242 BO Model XML Kinematics STEP AP242 BO Model XML Assembly Structure Composites 30 DD Month, YEAR Presentation title runs here (go to Header and Footer to edit this text)

31 Link to CAx IF: Recommended practices 31 DD Month, YEAR Presentation title runs here (go to Header and Footer to edit this text)

32 Public status of STEP AP242 functionalities available for operational use, tested by the industry, with identification of limitations of the tested PLM COTS STEP AP242 applications. Publication of AFNeT prostep ivip STEP AP242 ed1 benchmarks done for the main CAD and PDM COTS : AP242 benchmark #2 (2017): CAD Work Package AP242 benchmark #2 (2017): PDM Work Package 1 Introduction 2 Terms and definitions 3 Test methodology 4 Test results for each tool 5 Test results for each test case 6 Summary 7 Publication of the long report 8 Acknowledgements Public report - 3D geometry and assembly structure : high level of quality - 3D geometry with 3D PMI graphic presentation: promising results - 3D geometry with 3D PMI semantic: limited implementations, but promising results, announcement of support by main CAD editors Public report 1 Introduction 2 References and terms 3 Test methodology 3.1 Functionalities tested in this Benchmark 3.2 Testing Strategy 3.3 Synthetic Test Case Specifications 3.4 List of tested applications 3.5 STEP file selected as reference for phase 3 4 Test Results 4.1 Overview of the Test Results 4.2 Overall Test Results 5 Summary 6 Publication of the Long Report of PDM test case 7 Acknowledgements good level of AP242 XML implementation for PDM As designed product structure exchange.

33 Enhanced navigation capabilities in AP242 ed2 Domain Model, thanks to the direct access to the capabilities Oct AFNeT prostep ivip STEP AP242 Day Two ways to navigate: via the menu on the left or via the capabilities overview picture

34 STEP AP242 ed2 DIS Electrical Harness capability overview The Electrical Harness Core Technical Capability : - covers Wiring Harness design information to manufacture the harness. - is consistent with the other technical disciplines of AP242 ed2 : PDM, Kinematic, composite, 3D geometry, PMI Link to AP242 ed2 draft DIS STEP AP242 ed2 = Integrated model across several technical disciplines 34

35 Information overview of the main STEP standards of interest for the A&D ASD SSG public web site

36 Thank you