Medical Device Directive

Size: px
Start display at page:

Download "Medical Device Directive"

Transcription

1 Medical Device Directive WG9 - IEC/SC 62A ISO/TC 184/SC 2 Joint Working Group 9 Saeed Zahedi 4 th of July 2012 Blatchford Copyright 2012 Commercial in confidence

2 Definition and Requirements MDD is law, Operating Rules for manufacturers Mitigation of all risks to User / Patient Addition to MDD in 2010, and FDA Guides # 1 Essential Requirements 16 of them Use of Harmonized Published Medical EN/ISO Structural, Functional testing and Clinical Trial Technical File, Traceability, Vigilant System Labelling Packaging and Fitting Instruction Medical Devices Quality Standard ISO 13485

3 MDD CE Compliance Process Relevant Medical Standards MDD 2007 MDD ER Annexes Risk Assessment Quality Assurance Software assessment IEC Clinical Evaluation Electrical Safety IEC US Specific FCC CFR47 Structural Safety Robotic Standards Information Supplied 1041 Labeling Requirement 980 Infection Microbial Bio Compat

4 Creation of Technical File Classification 1 2a 2b 3 Approved Test and Trial Product Specification Technical File Design Intend Controlled Inspection Post Market Surveillance ER Check List

5 Safest route for manufacturer User Safety Rouge Product Level field Protecting user Reduce Litigation Declaration of Conformity ISO Audit CE Policing Vigilant System e.g. MHRA Competent Authority Registration Notified Body

6 Integrating Different Skill set Cross Reference to ER of MDD Cover all Requirements with EN standards Definition is it a medical device Is it Class 1 for self certify Is it Class 2a and above Notified body help General MDD ER fulfilment Risk Assessment for medical devices Clinical Trial and Tests to mitigate Risk Medical Quality Assurance certification

7 Example: Exo Leg CE Marking Determine is it a Medical Device Determine are we the Manufacturer Determine Which Class of Medical Device Start the Process of MDD Compliance End by Setting up Vigilant System Certify CE Declaration of Conformity Start Post Market Surveillance Process Plan the Exo Leg II

8 Department of Health Guidelines

9 Example: Exo Leg Meeting ER I. GENERAL REQUIREMENTS ER A - N/A Applied DOCUMENT Specifications, REFERENCES AND Standards, LOCATION Procedures, with Justification M5 1. The devices must be designed and manufactured in such a way that, when used under the conditions and for the purposes intended, they will not compromise the clinical condition or the safety of patients, or the safety and health f h li bl h A QA manuals and procedures This shall include: BS EN 14971:2007 reducing, as far as possible, the risk of use error due to the ergonomic features of the device and the environment in which consideration of the technical knowledge, experience, education and training and where applicable the medical (Risk management) Design History File. Regulatory Guidance A risk assessment according to the relevant harmonised standard should be performed Risk Management report, labelling, Production specification in the Technical File User manual

10 Revised MDD and Software and Evidence of Benefit Item CLA SS CEI IEC compliance checklist 4 General requirements 4.1 Quality management systems 4.2 Risk Management, application of risk management according to ISO Software safety classification 5 Software development process 5.1 Software development planning A,B,C Software development plan A,B,C Keep software development plan updated A,B,C Software development plan reference to SYSTEM design and development C Software development standards, methods and tools planning B,C Software integration and integration testing planning A,B,C Software verification planning A,B,C Software risk management planning A,B,C Documentation planning A,B,C Software configuration management planning B,C Supporting items to controlled B,C Software configuration item control before verification 5.2 Software requirements analysis A,B,C Define and document software requirements from system requirements A,B,C Software requirements content B,C Include risk control measures in software requirements A,B,C Re-evaluate medical device risk analysis A,B,C Update system requirements A,B,C Verify software requirements 5.3 Software architectural design

11 Example: Declaration of Conformity - CE Marking

12 Typical Approach Demonstration Excel representation in addition to FMEA Demo on Screen example Exo leg

Quality Manual. ISO 9001:2008 Standard. Issue No - 3. April

Quality Manual. ISO 9001:2008 Standard. Issue No - 3. April Quality Manual ISO 9001:2008 Standard Issue No - 3 April - 2010 COPYRIGHT: Renaissance Services-CSG owns the copyright of this document. It may not be copied, reproduced or transmitted in any form without

More information

National laws. National Competent Authority / Authorities. Orders, ordinances (supervision)

National laws. National Competent Authority / Authorities. Orders, ordinances (supervision) 1 The Regulatory World Only for products classified higher than class I: Notification of the body, Supervision National laws National Competent Authority / Authorities Orders, ordinances (supervision)

More information

1 Preface Introduction... 13

1 Preface Introduction... 13 1 Preface... 11 2 Introduction... 13 3 Legal Requirements... 15 3.1 Approach to determining the legal implications... 15 3.2 Software as a medical device... 17 3.2.1 Intended purpose... 18 3.2.2 Normal

More information

Quality system implementation from a manufacturers viewpoint

Quality system implementation from a manufacturers viewpoint OD005 IECEx Quality System Requirements for Manufacturers Quality system implementation from a manufacturers viewpoint Evans Massy Rockwell Automation October 3, 2005 31/10/2005 1 1515 1545 Manufacturer

More information

MEDICAL DEVICE. Technical file.

MEDICAL DEVICE. Technical file. MEDICAL DEVICE Technical file www.icaro-research.eu ICARO MDTF v1.0 1 Mar 2016 1. Do you plan to launch your medical device in Europe? If you re reading this, chances are good that you re considering introducing

More information

SOFTWARE APPS AS MEDICAL DEVICES. The Regulatory Landscape 2015 WHITE PAPER WHITE PAPER PRODUCED BY MAETRICS

SOFTWARE APPS AS MEDICAL DEVICES. The Regulatory Landscape 2015 WHITE PAPER WHITE PAPER PRODUCED BY MAETRICS WHITE PAPER SOFTWARE APPS AS MEDICAL DEVICES The Regulatory Landscape 2015 WHITE PAPER PRODUCED BY MAETRICS For more information, please contact: USA Office: +1 317 706 1493 UK Office: +44 115 921 6200

More information

CO-ORDINATION OF NOTIFIED BODIES PPE Regulation 2016/425 RECOMMENDATION FOR USE

CO-ORDINATION OF NOTIFIED BODIES PPE Regulation 2016/425 RECOMMENDATION FOR USE CO-ORDINATION OF NOTIFIED BODIES PPE Regulation 2016/425 PPE-R/00.018 Version 1 RECOMMENDATION FOR USE Number of pages: 5 Approval stage : Approved on : Origin : Horizontal Committee, C2D Ad hoc group

More information

BSI Audits for MDR Certification

BSI Audits for MDR Certification BSI Audits for MDR Certification Quality System Audits Unannounced Audits (ongoing per MDD / MDR) No changes as a result of MDR / IVDR New frequencies already applied Once per 3 years for Class III & Implants

More information

CE marking is regarded as a passport for products to enter and circulate freely within the 30 counties forming part of the EEA.

CE marking is regarded as a passport for products to enter and circulate freely within the 30 counties forming part of the EEA. CE Marking Services What is CE Marking? Many products that are placed on the single market in the European Economic Area (EEA) (28 EU countries, together with Iceland, Liechtenstein and Norway) contain

More information

Regulations governing the application of medical accelerators

Regulations governing the application of medical accelerators Regulations governing the application of medical accelerators in 50 minutes. marko.mehle@cosylab.com 2 1.The wonderland of STANDARDS AND REGULATIONS 3 Laws and standards Medical devices (and systems) are

More information

WELMEC European cooperation in legal metrology

WELMEC European cooperation in legal metrology WELMEC 8.6 Issue 1 WELMEC European cooperation in legal metrology Measuring Instruments Directive 2004/22/EC Presumption of Conformity of the Quality System of Manufacturers with Module D or H 1 when EN

More information

WELMEC Application of module D Quality assurance Under directive 2014/32/EU (MID) or directive 2014/31/EU (NAWID)

WELMEC Application of module D Quality assurance Under directive 2014/32/EU (MID) or directive 2014/31/EU (NAWID) WELMEC 8.4 2017 Application of module D Quality assurance Under directive 2014/32/EU (MID) or directive 2014/31/EU (NAWID) WELMEC is a cooperation between the legal metrology authorities of the Member

More information

QMS Aspects of the MDR (& IVDR)

QMS Aspects of the MDR (& IVDR) QMS Aspects of the MDR (& IVDR) Vicky Medley Global QMS Manager Medical Devices 27 February 2018 Copyright 2018 BSI. All rights reserved This Presentation 1. The clock is ticking! 2. Dates & priorities

More information

Implications of the new MDR from a Product Testing and Certification Perspective

Implications of the new MDR from a Product Testing and Certification Perspective Implications of the new MDR from a Product Testing and Certification Perspective Helping You to Access Global Markets FAST and PREDICTABLY www.test-medical-devices.com 1 Hans Gerd Evering MDR - Implications

More information

ISO 13485:2016 Medical Devices-Quality Management Systems- Requirements for Regulatory Purposes. Theresa McCarthy

ISO 13485:2016 Medical Devices-Quality Management Systems- Requirements for Regulatory Purposes. Theresa McCarthy ISO 13485:2016 Medical Devices-Quality Management Systems- Requirements for Regulatory Purposes Theresa McCarthy Welcome and Introductions Please interview and collect: Name Primary Quality Management

More information

Technical documentation in the new MDR. Gabriele Catignoli, Andreas Purde

Technical documentation in the new MDR. Gabriele Catignoli, Andreas Purde Technical documentation in the new MDR Annex I/II Gabriele Catignoli, Andreas Purde TÜV SÜD Product Service GmbH Slide 1 MDR Annex I, II 1 Core changes, Essential Requirements 2 Role of Common Specifications

More information

IVDR Breakout. Copyright 2017 BSI. All rights reserved.

IVDR Breakout. Copyright 2017 BSI. All rights reserved. IVDR Breakout 1 IVDR Annex I (SPRs) & Annex II (Tech documentation) 2 IVDR Annex I General Safety & performance requirements 3 Overview Context of the General Safety & Performance Requirements (SPRs) [our

More information

Technical documentation. Capita Selecta proposed MDR

Technical documentation. Capita Selecta proposed MDR Technical documentation Capita Selecta proposed MDR 25-03-2013 1 Technical Documentation MDD / AIMDD (In daily practice) technical documentation = design dossier = technical (construction) file = design

More information

ISO and UAV Audits Preparation and Client Rights

ISO and UAV Audits Preparation and Client Rights 1 ISO 13485 and UAV Audits Preparation and Client Rights Medical Devices Quality Management Systems Requirements for Regulatory Purposes 24301 Woodsage Dr. Bonita Springs, FL 34134 (239)-307-6060 www.promedic.cc

More information

Update on Regulatory Environment- Europe Experience with 2007/47/EC M5 & Discussions on Possible Recast of EU Medical Device Regulations

Update on Regulatory Environment- Europe Experience with 2007/47/EC M5 & Discussions on Possible Recast of EU Medical Device Regulations Update on Regulatory Environment- Europe Experience with 2007/47/EC M5 & Discussions on Possible Recast of EU Medical Device Regulations Paul Brooks Vice President Healthcare, Americas Presentation to:

More information

This document is a preview generated by EVS

This document is a preview generated by EVS INTERNATIONAL STANDARD ISO 30301 First edition 2011-11-15 Information and documentation records Requirements Information et documentation Systèmes de gestion des documents d'activité Exigences Reference

More information

ISO Information and documentation Management systems for records Fundamentals and vocabulary

ISO Information and documentation Management systems for records Fundamentals and vocabulary Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 30300 First edition 2011-11-15 Information and documentation records Fundamentals and vocabulary Information et documentation Systèmes de gestion

More information

Application for Examination of a Quality System according to LVFS 2003:11 (for CE marking o medical devices)

Application for Examination of a Quality System according to LVFS 2003:11 (for CE marking o medical devices) Company (applicant): hereby applies to, as Notified Body, in accordance with the EG-directive 93/42/EEC (changed 2007/47/EG) for review according to below Review in accordance with 93/42/EEC Annex Annex

More information

PART 1 DEVICE MASTER FILE

PART 1 DEVICE MASTER FILE Form-No.: 01 03 00 19e Proposal for a General Product Documentation 0.1 Cover page (company, title, No., release, signature etc.) 0.2 Content (e. g. as document master file) 0.3 General information about

More information

Checklist for the assessment based on the standards

Checklist for the assessment based on the standards ISO & MDD & Checklist for the assessment based on the standards ISO :2016 ISO :2016 associate with EC Directive 93/42 EEC Where applicable EC Directive 93/42/EEC Annex II/V/VI Company: Audit date Auditor:

More information

Med-Info. Directive 98/79/EC on in-vitro diagnostic medical devices. TÜV SÜD Product Service GmbH

Med-Info. Directive 98/79/EC on in-vitro diagnostic medical devices. TÜV SÜD Product Service GmbH Med-Info International expert information for the medical device industry Directive 98/79/EC on in-vitro diagnostic medical devices Practice-oriented summary of the most important aspects and requirements

More information

COMMISSION RECOMMENDATION. of XXX. on the audits and assessments performed by notified bodies in the field of medical devices

COMMISSION RECOMMENDATION. of XXX. on the audits and assessments performed by notified bodies in the field of medical devices EUROPEAN COMMISSION Brussels, XXX [ ](2013) XXX draft COMMISSION RECOMMENDATION of XXX on the audits and assessments performed by notified bodies in the field of medical devices (Text with EEA relevance)

More information

TURBO MACH A DIVISION OF VT SAA

TURBO MACH A DIVISION OF VT SAA TERMS AND CONDITIONS PAGE: 1 OF 5 1. PURPOSE To define specific terms and conditions for the purchase of product, materials and services. 2. SCOPE All products, materials and services purchased for use

More information

Regulatory Framework for Medical Device

Regulatory Framework for Medical Device Regulatory Framework for Medical Device International Seminar Safety of Health Products French Ministry of Labour, Employment and Health Paris, 26 May 2011 Peter Bischoff-Everding European Commission EU

More information

Bridging gaps: medical device directive vs regulation. Geert Corstens 1 November 2018

Bridging gaps: medical device directive vs regulation. Geert Corstens 1 November 2018 Bridging gaps: medical device directive vs regulation Geert Corstens 1 November 2018 Agenda Current Medical Device regulatory landscape New Medical Device Regulation EU Interaction & impact Medical device

More information

Auditing Within the Culture of the Medical Device Industry & ISO 13485:2016 Overview. ASQ Quality Conference 2017 for Region 5 October 25, 2017

Auditing Within the Culture of the Medical Device Industry & ISO 13485:2016 Overview. ASQ Quality Conference 2017 for Region 5 October 25, 2017 Auditing Within the Culture of the Medical Device Industry & ISO 13485:2016 Overview ASQ Quality Conference 2017 for Region 5 October 25, 2017 Introduction / Purpose Discuss the influences of regulatory

More information

ILAC P10 TRACEABILITY

ILAC P10 TRACEABILITY ACTIVITY 1.3 TRAINING SESSION FOLLOWING THE FINDINGS FROM PREVIOUS ACTIVITIES: ILAC P10 TRACEABILITY Maria Pia Toni Slide 1 of XX REFERENCE ILAC P10:2013 ILAC Policy on the Traceability of Measurement

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 9000 Third edition 2005-09-15 Quality management systems Fundamentals and vocabulary Systèmes de management de la qualité Principes essentiels et vocabulaire Reference number

More information

ISO 9001:2015 GAP ANALYSIS CHECKLIST

ISO 9001:2015 GAP ANALYSIS CHECKLIST Context of the Organization 4.1 Understanding the organization and its context Organization shall determine external and internal issues that are relevant to its purpose and strategic direction and that

More information

EXAMPLE OF VENDOR QUALIFICATION FOR IMMUNE EFFECTOR CELL PRODUCT MANUFACTURER

EXAMPLE OF VENDOR QUALIFICATION FOR IMMUNE EFFECTOR CELL PRODUCT MANUFACTURER EXAMPLE OF VENDOR QUALIFICATION FOR IMMUNE EFFECTOR CELL PRODUCT MANUFACTURER Disclaimer: This example is just one potential example of a vendor qualification form to verify the adequacy of the internal

More information

ehealth Suisse Checklists Addendum to the guideline for app developers, manufacturers and distributors

ehealth Suisse Checklists Addendum to the guideline for app developers, manufacturers and distributors ehealth Suisse Checklists Addendum to the guideline for app developers, manufacturers and distributors Bern, 2 March 2018 Page 1 Legal notice ehealth Suisse, Swiss Competence and Coordination Centre of

More information

ISO INTERNATIONAL STANDARD. Quality systems Medical devices Guidance on the application of ISO and ISO 13488

ISO INTERNATIONAL STANDARD. Quality systems Medical devices Guidance on the application of ISO and ISO 13488 INTERNATIONAL STANDARD ISO 14969 First edition 1999-06-01 Quality systems Medical devices Guidance on the application of ISO 13485 and ISO 13488 Systèmes qualité Dispositifs médicaux Lignes directrices

More information

Assessment and Auditing under the IECEx 02 Certified equipment Scheme. Thierry Houeix Certification Officer & Technical Advisor

Assessment and Auditing under the IECEx 02 Certified equipment Scheme. Thierry Houeix Certification Officer & Technical Advisor Assessment and Auditing under the IECEx 02 Certified equipment Scheme Thierry Houeix Certification Officer & Technical Advisor Contents 1. Auditing 2. Issuing QARs, 3. Scheduling of surveillance audits

More information

GUIDANCE NOTES FOR MANUFACTURERS OF CLASS I MEDICAL DEVICES

GUIDANCE NOTES FOR MANUFACTURERS OF CLASS I MEDICAL DEVICES MDEG - 2007-12 - II-3.3 MSOGClassIGuidance_Final GUIDANCE NOTES FOR MANUFACTURERS OF CLASS I MEDICAL DEVICES Foreword These guidance notes do not aim to be a definite interpretation of National Laws and/or

More information

AAMI Quality Systems White Paper

AAMI Quality Systems White Paper AAMI s White Paper Comparison of 21 CFR Part 820 to ISO 13485:2016 February 2017, Updated February 2018 AUTHORS Seb Clerkin, GMP Advisory Services Nicola Martin, Owner, Nicola Martin Consulting Jack Ward,

More information

Standards Development and Modification

Standards Development and Modification Standards Development and Modification Corporate Procedure 13 1 Introduction 1.1 This document sets out the procedure for the development and/or modification of SCSsponsored standards and guidelines suitable

More information

WELMEC European cooperation in legal metrology

WELMEC European cooperation in legal metrology WELMEC 8.0 Issue 1 WELMEC European cooperation in legal metrology Measuring Instruments Directive 2004/22/EC Generalities on the Assessment and Operation of Notified Bodies performing Conformity Assessment

More information

Short intro to the MDR & IVDR (C)2018 QAdvis AB

Short intro to the MDR & IVDR (C)2018 QAdvis AB Short intro to the MDR & IVDR 2018-06-11 1 , MDR Major changes for medical device and IVD device industry EU regulations Non-EU regulations Standards Brexit Affecting all stakeholders: manufactuers, distributors,

More information

Equipment Certification and Importation Procedures Authentication of certificates and ensuring that approval requirements are met

Equipment Certification and Importation Procedures Authentication of certificates and ensuring that approval requirements are met Equipment Certification and Importation Procedures Authentication of certificates and ensuring that approval requirements are met Keith Mainwaring Ukrainian National Information Systems (UNIS) Tunis, 9

More information

Automated System Validation By: Daniel P. Olivier & Curtis M. Egan

Automated System Validation By: Daniel P. Olivier & Curtis M. Egan Automated System Validation By: Daniel P. Olivier & Curtis M. Egan In today s technical environment validation practices are both a requirement and an important tool in the medical and pharmaceutical industry.

More information

Guide for Class I Manufacturers on Compliance with European Communities (Medical Devices) Regulations, 1994

Guide for Class I Manufacturers on Compliance with European Communities (Medical Devices) Regulations, 1994 Guide for Class I Manufacturers on Compliance with European Communities (Medical Devices) Regulations, 1994 SUR-G0006-2 27 AUGUST 2010 This guide does not purport to be an interpretation of law and/or

More information

Equipment Certification and Importation Procedures Authentication of certificates and ensuring that approval requirements are met

Equipment Certification and Importation Procedures Authentication of certificates and ensuring that approval requirements are met Equipment Certification and Importation Procedures Authentication of certificates and ensuring that approval requirements are met Keith Mainwaring Ukrainian National Information Systems (UNIS) Trinidad

More information

AUSTRALIAN MEDICAL DEVICES GUIDANCE DOCUMENT NUMBER 5. The Declaration of Conformity

AUSTRALIAN MEDICAL DEVICES GUIDANCE DOCUMENT NUMBER 5. The Declaration of Conformity AUSTRALIAN MEDICAL DEVICES GUIDANCE DOCUMENT NUMBER 5 The Declaration of Conformity 30 October 2003 DISCLAIMER This document is provided for guidance only. It should not be relied upon to address every

More information

Medical Device Regulation

Medical Device Regulation Johner Institut Medical Device Regulation 7 Steps to MDR Compliance Astrid Schulze Graduate in economics 20 years entrepreneur in quality management and approval of medical devices and software Since 2017

More information

FREQUENTLY ASKED QUESTIONS DURING ELECTRO-MEDICAL DEVICE MARKET ACCESS

FREQUENTLY ASKED QUESTIONS DURING ELECTRO-MEDICAL DEVICE MARKET ACCESS FREQUENTLY ASKED QUESTIONS DURING ELECTRO-MEDICAL DEVICE MARKET ACCESS Helping You to Access Global Markets FAST and PREDICTABLY Vishal Thakker, MEng(Hons), AMIMechE Scheme Manager/Product Specialist BSI

More information

Experience with Directive 93/42/EEC (MDD)

Experience with Directive 93/42/EEC (MDD) (MDD) A medical device manufacturer s retrospective view on 19 years of experience with Directive 93/42/EEC Lübeck, 2012-09-05, Dr. Peter Gebhardt Preliminary Remarks Scope of this presentation is based

More information

Design Quality. Indu Lakshman

Design Quality. Indu Lakshman Design Quality Indu Lakshman Overview New product development (NPD) covers the complete process of bringing a new product to market. In commercial terms, new product development is described in the literature

More information

ASQ Tappan Zee Section Medical Devices, New Regulations and Standards. 26 th September / V. Fischer / Rev. 01

ASQ Tappan Zee Section Medical Devices, New Regulations and Standards. 26 th September / V. Fischer / Rev. 01 ASQ Tappan Zee Section Medical Devices, New Regulations and Standards 26 th September / V. Fischer / Rev. 01 Agenda Medical Device, General Aspects Examples Quality System(s) New Regulations & Standards

More information

Supporting CE-Marking Obligations of Our Customers: The Role of the Galvanizer

Supporting CE-Marking Obligations of Our Customers: The Role of the Galvanizer Supporting CE-Marking Obligations of Our Customers: The Role of the Galvanizer NORDIC GALVANIZERS ANNUAL MEETING 8 MAY 2014 COPENHAGEN MURRAY COOK EXECUTIVE DIRECTOR EUROPEAN GENERAL GALVANIZERS ASSOCIATION

More information

Sam Chappell, CIML Honorary Member, USA

Sam Chappell, CIML Honorary Member, USA 22 OPPORTUNITIES AND FUTURE TRENDS IN LEGAL METROLOGY CONTROL OF MEASURING INSTRUMENTS Sam Chappell, CIML Honorary Member, USA Introduction Currently, legal metrology control generally includes type evaluation

More information

ISO 9001:2015 Gap Analysis Check Sheet

ISO 9001:2015 Gap Analysis Check Sheet CONTEXT OF THE ORGANIZATION 4.1 Understanding the organization and its context Organization shall determine external and internal issues that are relevant to its purpose and strategic direction and that

More information

PDA & West Present: Combination Products Combination Product Hot Topics: Post Approval Device Changes and the New EU MDR Article 117 Requirements

PDA & West Present: Combination Products Combination Product Hot Topics: Post Approval Device Changes and the New EU MDR Article 117 Requirements PDA & West Present: Combination Products Combination Product Hot Topics: Post Approval Device Changes and the New EU MDR Article 117 Requirements Doug Mead, Sr. Director, CMC RA, Devices and Combination

More information

10 Things You Should Do Before You Validate Your Next Package

10 Things You Should Do Before You Validate Your Next Package sponsored by 10 Things You Should Do Before You Validate Your Next Package Before you set out to validate a medical device package design or process, you ve got to do your homework. You need to understand

More information

INSTRUCTIONS FOR CERTIFICATION OF FACTORY PRODUCTION CONTROL

INSTRUCTIONS FOR CERTIFICATION OF FACTORY PRODUCTION CONTROL . August 2017 were approved by Manager of Product Certification Bureau of the Polish Register of Shipping on 25 August 2017 Copyright by, 2017. GDAŃSK, AUGUST 2017 1/12 CONTENTS 1. Factory Production Control

More information

SUPPLIER SURVEY FORM Instructions

SUPPLIER SURVEY FORM Instructions SUPPLIER SURVEY FORM Instructions 1. The following Supplier Survey was developed by Vishay Measurements Group, Inc. to assess and document the capability of its supplier base. 2. The Supplier Survey is

More information

The upcoming EU MDR. Gert Bos. - key changes overview. Executive director & Partner. ..the practical approach

The upcoming EU MDR. Gert Bos. - key changes overview. Executive director & Partner. ..the practical approach The upcoming EU MDR - key changes overview Gert Bos Executive director & Partner A global leading medical device consultancy group Europe - Amsterdam (HQ) USA - Boston - San Francisco China Nanjing Copyright

More information

ISO 13485:2016. What s in it - and what does it mean?

ISO 13485:2016. What s in it - and what does it mean? ISO 13485:2016 What s in it - and what does it mean? QAdvis key competence areas Turn key quality systems Sharepoint based Digital signatures Efficient and lean Validated and compliant QMS in-the cloud

More information

Standard and Directives on Medical Devices

Standard and Directives on Medical Devices Standard and Directives on Medical Devices Definition A Medical Device is identified by means of its INTENDED PURPOSE Intended to treat, prevent or control physiological characteristics of a living being

More information

Effects of the European MDR on the Quality Management System. Karl-Heinz Spohn

Effects of the European MDR on the Quality Management System. Karl-Heinz Spohn Effects of the European MDR on the Quality Management System Karl-Heinz Spohn 1 Karl-Heinz Spohn Senior Consultant Certified Electrical Engineer with a specialization in Data Electronics. Since 1981 working

More information

Conformity Assessments Revised Toy Safety Directive 2009/48/EC

Conformity Assessments Revised Toy Safety Directive 2009/48/EC Toy Safety Update Conformity Assessments Revised Toy Safety Directive 2009/48/EC Contents 1. Obligations of Economic Operators 2. Introduction 3. Overview 4. How to use this guide 5. The Conformity Assessment

More information

The Pressure Equipment Directive 2014/68/EU. Photo: nostal6ie/ Shutterstock

The Pressure Equipment Directive 2014/68/EU. Photo: nostal6ie/ Shutterstock The Pressure Equipment Directive 2014/68/EU Photo: nostal6ie/ Shutterstock Information for our Customers and Partners. One objective of the EU single market is to ensure the smooth technical transfer of

More information

Guidance on the Information Required for Notified Body Medical Device Personnel Involved in Conformity Assessment

Guidance on the Information Required for Notified Body Medical Device Personnel Involved in Conformity Assessment NBOG s Best Practice Guide applicable for AIMDD, MDD, and IVDD 2014-2 Guidance on the Information Required for Notified Body Medical Device Personnel Involved in Conformity Assessment Activities Personnel

More information

Course Title ID Duration Basic Premium. Biological Evaluation of Medical Devices: A Risk-Based Approach N mins

Course Title ID Duration Basic Premium. Biological Evaluation of Medical Devices: A Risk-Based Approach N mins Pre-Clinical Basic Level : CMDA Certified Medical Device Associate Biological Evaluation of Medical Devices: A Risk-Based Approach N134 63 mins 186.00 144.00 Introduction to Process Validation N135 75

More information

POSITION PAPER Moving from the MDD to the MDR

POSITION PAPER Moving from the MDD to the MDR A summary of Key Changes regarding Sterile Packaging and considerations on recommended changes to standards Introduction EN ISO 11607 specifies the requirements and test methods for materials, preformed

More information

The challenges of software medical device regulation.

The challenges of software medical device regulation. The challenges of software medical device regulation. david.grainger@mhra.gov.uk Introduction A brief history of software device regulation A look at the new device regulations 2 Current framework In Vitro

More information

MDSAP Purchasing Process

MDSAP Purchasing Process MDSAP Purchasing Process The Medical Device Single Audit Program, MDSAP, evaluates companies on their compliance to requirements based on ISO 13485:2016 and national regulations. An MDSAP audit looks at

More information

Impact of the MD/IVD Regulations on Quality Management Systems

Impact of the MD/IVD Regulations on Quality Management Systems Impact of the MD/IVD Regulations on Quality Management Systems Dirk Stynen, Ph. D. President Qarad RMD 2018 Brussels In this presentation: focus on In Vitro Diagnostic Devices... but the same applies to

More information

Manufacturers of in vitro Diagnostic

Manufacturers of in vitro Diagnostic European Commission Factsheet for Manufacturers of in vitro Diagnostic Medical Devices This Factsheet is aimed at manufacturers of in vitro diagnostic medical devices. For information on the impact of

More information

Applying ISO14971 / IEC62304 / IEC A Practical Guide On How To Implement Risk Management

Applying ISO14971 / IEC62304 / IEC A Practical Guide On How To Implement Risk Management Applying ISO14971 / IEC62304 / IEC62366-1 - A Practical Guide On How To Implement Risk Management *** LIMITED TIME OFFER: FREE $100 AMAZON GIFT CARD! *** REGISTER TODAY! Risk management is a mandatory

More information

Provläsningsexemplar / Preview. Third edition

Provläsningsexemplar / Preview. Third edition Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 15378 Third edition 2015-10-01 Primary packaging materials for medicinal products Particular requirements for the application of ISO 9001:2008,

More information

Manufacturers. Factsheet for. of Medical Devices. Medical Devices Regulation (MDR) background. Act now to be ready on time!

Manufacturers. Factsheet for. of Medical Devices. Medical Devices Regulation (MDR) background. Act now to be ready on time! Ref. Ares(2018)3873669-20/07/2018 Factsheet for Manufacturers of Medical Devices This Factsheet is aimed at manufacturers of medical devices. For a general overview of the impact of the In-Vitro Medical

More information

Introduction. Basis for the EC Type Examination. EC Type Examination of PPE in catherogy II and III, for CE-marking according to Directive 89/686/EEC

Introduction. Basis for the EC Type Examination. EC Type Examination of PPE in catherogy II and III, for CE-marking according to Directive 89/686/EEC EC Type Examination of PPE in catherogy II and III, for CE-marking according to Directive 89/686/EEC Introduction This information, made up by SP, is meant to be used as a support when putting together

More information

The New EU Medical Device Regulation (MDR) An Active Device Lifecycle Approach Implementation and Remediation Activities

The New EU Medical Device Regulation (MDR) An Active Device Lifecycle Approach Implementation and Remediation Activities visit usdm.com The New EU Medical Device Regulation (MDR) An Active Device Lifecycle Approach Implementation and Remediation Activities Jay Crowley VP and Practice Lead UDI Services and Solutions jcrowley@usdm.com

More information

Manufacturers of In-Vitro Diagnostic

Manufacturers of In-Vitro Diagnostic Ref. Ares(2018)3873780-20/07/2018 Factsheet for Manufacturers of In-Vitro Diagnostic Medical Devices This Factsheet is aimed at manufacturers of in-vitro diagnostic medical devices. For information on

More information

QP Supplier Quality Requirements Manual. Purchasing. Dearborn Inc. Revision: E Page 1 of PURPOSE

QP Supplier Quality Requirements Manual. Purchasing. Dearborn Inc. Revision: E Page 1 of PURPOSE Page 1 of 8 1.0 PURPOSE 1.1 The purpose of this manual is to have a single document which conveys the minimum quality requirements and manufacturing practices expected of suppliers for value added products

More information

European Packaging Regulations What to expect from a notified body audit of your packaging

European Packaging Regulations What to expect from a notified body audit of your packaging What to expect from a notified body audit of your packaging Dr. Ralf Walther TÜV Süd Product Service GmbH March 3-5, 2009 www.healthpack.net Content 1. Short introduction of TÜV Süd Product Service 2.

More information

Manufacturers. Factsheet for. of Medical Devices. Medical Devices Regulation (MDR) background. Act now to be ready on time!

Manufacturers. Factsheet for. of Medical Devices. Medical Devices Regulation (MDR) background. Act now to be ready on time! European Commission Factsheet for Manufacturers of Medical Devices This Factsheet is aimed at manufacturers of medical devices. For a general overview of the impact of the In Vitro Medical Devices Regulation

More information

EU Annex 11 US FDA 211, 820, 11; other guidelines Orlando López 11-MAY-2011

EU Annex 11 US FDA 211, 820, 11; other guidelines Orlando López 11-MAY-2011 Principle. a. This annex applies to all forms of computerised systems used as part of a GMP regulated activities. A computerised system is a set of software and hardware components which together fulfill

More information

A REVIEW OF MARKET ENTRY REQUIREMENTS FOR RISK MANAGEMENT, WITH SPECIAL EMPHASIS ON FDA AND ISO COMPLIANCE

A REVIEW OF MARKET ENTRY REQUIREMENTS FOR RISK MANAGEMENT, WITH SPECIAL EMPHASIS ON FDA AND ISO COMPLIANCE BYLINED ARTICLE ON: A REVIEW OF MARKET ENTRY REQUIREMENTS FOR RISK MANAGEMENT, WITH SPECIAL EMPHASIS ON FDA AND ISO 14971 COMPLIANCE By Mark Leimbeck PE Underwriters Laboratories and Larry Kessler Sc.D.

More information

V&V Best Practices. CASSS, CMC Strategy Forum Steven W. Badelt, PhD Managing Partner Suttons Creek, Inc. SUTTONSCREEK.COM

V&V Best Practices. CASSS, CMC Strategy Forum Steven W. Badelt, PhD Managing Partner Suttons Creek, Inc. SUTTONSCREEK.COM V&V Best Practices CASSS, CMC Strategy Forum Steven W. Badelt, PhD Managing Partner Suttons Creek, Inc. Solving the problem of Complexity. 21CFR820.30 & FDA Guidance INCOSE System Engineering Handbook

More information

Bundesanstalt für Materialforschung und -prüfung (BAM) Pyrotechnics Division 2.3 Explosives D Berlin Berlin,

Bundesanstalt für Materialforschung und -prüfung (BAM) Pyrotechnics Division 2.3 Explosives D Berlin Berlin, Bundesanstalt für Materialforschung und -prüfung (BAM) Pyrotechnics Division 2.3 Explosives D -12200 Berlin Berlin, 2015-09-04 Pyrotechnic Articles Directive 2013/29/EU Information on the Conformity Assessment

More information

IEC Quality Assessment System for Electronic Components (IECQ System)

IEC Quality Assessment System for Electronic Components (IECQ System) IECQ 03-4 Edition 4.0 2018-12 IECQ PUBLICATION IEC Quality Assessment System for Electronic Components (IECQ System) Rules of Prodecure Part 4: IECQ ADHP Scheme Aerospace, Defense, and High Performance

More information

INTEGRATING ISO 9000 METHODOLOGIES WITH PROJECT QUALITY MANAGEMENT

INTEGRATING ISO 9000 METHODOLOGIES WITH PROJECT QUALITY MANAGEMENT INTEGRATING ISO 9000 METHODOLOGIES WITH PROJECT QUALITY MANAGEMENT M a r ch 2015 OBJECTIVE ISO and Project Quality Management Process Are they different or the same? ISO 9000 QMS FAMILY ISO 9000:2005 Vocabulary

More information

Conformity Assessment of Medical Devices Under The New MDR

Conformity Assessment of Medical Devices Under The New MDR Conformity Assessment of Medical Devices Under The New MDR (Dec. 06, 2017) Tina Lochner, Medcert Slide 1 Agenda Scope: MDR Article 1 and 2 MDR Conformity Assessment: MHRA* (UK Competent Authority) MDR

More information

Current Quality. Culture. Mini Paper IE 361

Current Quality. Culture. Mini Paper IE 361 Current Quality Culture Mini Paper IE 361 I. Introduction ISO 9001 The International Organization for Standardization (ISO) was established in 1946 to promote the development of standardization and related

More information

FDA 21 CFR Part 820 vs. ISO 13485:2016 Comparison Table created by greenlight.guru

FDA 21 CFR Part 820 vs. ISO 13485:2016 Comparison Table created by greenlight.guru FDA 21 CFR Part 820 vs. ISO 13485:2016 Comparison Table created by greenlight.guru FDA QSR (21 CFR Part 820) ISO 13485:2016 820.1 Scope 1 Scope 2 Normative References 820.3 Definitions 3 Terms and Definitions

More information

REGISTRATION OF MEDICAL DEVICE. SUBMISSION & APPLICATION By IDAMAZURA IDRIS MEDICAL DEVICE AUTHORITY

REGISTRATION OF MEDICAL DEVICE. SUBMISSION & APPLICATION By IDAMAZURA IDRIS MEDICAL DEVICE AUTHORITY REGISTRATION OF MEDICAL DEVICE SUBMISSION & APPLICATION By IDAMAZURA IDRIS MEDICAL DEVICE AUTHORITY Medical device: regulated item under the Medical Device Act 2012 (Act 737) and its regulation The objective:

More information

Conformity assessment and ISO CASCO for standards writers

Conformity assessment and ISO CASCO for standards writers Conformity assessment and ISO CASCO for standards writers Content What is conformity assessment? What is ISO/CASCO? What is the ISO/CASCO Toolbox? ISO/IEC Directives, Part 2, Clause 6.7 What is conformity

More information

EU MDR 10 Things Packaging Engineers Should Know

EU MDR 10 Things Packaging Engineers Should Know EU MDR 10 Things Packaging Engineers Should Know networkpartners.com NUMBER ONE THE TIME FOR ACTION IS NOW First, some background: The EU Medical Device Regulation (MDR) was approved by the European Parliament

More information

Contents. Regulatory Bodies... 13

Contents. Regulatory Bodies... 13 Contents UNITED STATES... 3 Regulatory Bodies... 3 Product Classification and Regulatory Control... 3 Application Documents... 3 Quality System Requirements... 4 Product and Manufacturer s License... 4

More information

New Pharmacovigilance legislation. Post-authorisation safety studies. ENCePP Plenary meeting. 3 May 2012

New Pharmacovigilance legislation. Post-authorisation safety studies. ENCePP Plenary meeting. 3 May 2012 New Pharmacovigilance legislation Post-authorisation safety studies ENCePP Plenary meeting 3 May 2012 Presented by: Annalisa Rubino, PhV and Risk Management, EMA An agency of the European Union Why? Public

More information

Document: ISO/TC 176/SC 2/N 730. Our ref

Document: ISO/TC 176/SC 2/N 730. Our ref Document: ISO/TC 176/SC 2/N 730 Our ref Secretariat of ISO/TC 176/SC 2 Date: 30 June 2005 To the Members of ISO/TC 176/SC 2 - Quality Management and Quality Assurance/ Quality Systems Design Specification

More information

AAMI Quality Systems White Paper: Comparison of 21 CFR Part 820 to ISO 13485:2016 1

AAMI Quality Systems White Paper: Comparison of 21 CFR Part 820 to ISO 13485:2016 1 AAMI s White Paper Comparison of 21 CFR Part 820 to ISO 13485:2016 February 2017 AUTHORS Seb Clerkin, GMP Advisory Services Nicola Martin, Owner, Nicola Martin Consulting Jack Ward, Owner, Ward Sciences

More information

NAWI Directive Implementation and Application

NAWI Directive Implementation and Application NAWI Directive Implementation and Application by Håkan Källgren Swedish Metrology and Quality AB Håkan Källgren Experience: Employed at SP Technical Research Institute of Sweden in 40 years Metrology visits

More information

SUPPLY AND INSTALLATION OF TURBINES AND GENERATORS CONTRACT SCHEDULE 8 QUALITY MANAGEMENT TABLE OF CONTENTS

SUPPLY AND INSTALLATION OF TURBINES AND GENERATORS CONTRACT SCHEDULE 8 QUALITY MANAGEMENT TABLE OF CONTENTS SUPPLY AND INSTALLATION OF TURBINES AND GENERATORS CONTRACT SCHEDULE 8 QUALITY MANAGEMENT TABLE OF CONTENTS 1 INTERPRETATION... 1 1.1 Definitions... 1 2 QUALITY MANAGEMENT SYSTEM... 2 2.1 Quality Management

More information