Railton Consultants Ltd Quality Manual
|
|
- Elfreda Stevens
- 6 years ago
- Views:
Transcription
1 Railton Consultants Ltd Quality Manual Document No. RCL30114/MAN/1502 Revision 03 February 2015 Approved: Date:
2
3 REVISION/REVIEW REGISTER A REVIEW/CHANGE OF THIS DOCUMENT WAS CARRIED OUT AS FOLLOWS: DATE REVISION CARRIED OUT BY AMENDMENT AND BRIEF REASON 9/8/ N Edmunds Draft Version 9/4/ N Edmunds Revised following comments 26/10/14 02 N Edmunds Expand the description of Quality Centres and include new manuals such as Environmental Management, Sales and Marketing and Supply Chain management 20/02/15 03 N Edmunds Updated to include audit requirements and for PR10033 which requires the collection of quality data for processes. Included references to security procedures and documents. RCL30114/MAN/
4
5 CONTENTS 1 PURPOSE SCOPE ANNUAL REVIEW PROCESS Annual Quality Review Annual Software Security Review INTERNAL COMPANY COMMUNICATIONS PROJECT BASED APPROACH TO WORK Internal Projects COMPANY DOCUMENTATION Guide To Project Based Working Software Development Procedure Document Control Procedure Source Code Control Procedure Human Resources Manual Financial Procedure Sales and Marketing Manual Supply Chain Manual Health and Safety Procedure Environmental Management Manual Software Operation Manual Software Maintenance Manual Information Security Procedure AUDIT ISSUE MANAGEMENT Review Processes Annual Quality System Review Customer Feedback Course Participant Reviews Staff Appraisals Project Closeout Review Quality Data Collection Quality Centres and Action Tracking Project Technical Issues Quality System Issues RECORD RETENTION REFERENCES RCL30114/MAN/ i
6 APPENDIX A - GLOSSARY APPENDIX B RCL QUALITY DOCUMENTS ii RCL30114/MAN/
7 1 PURPOSE The purpose of the quality manual is to describe the operation of the Quality Management System (QMS) to be applied at Railton Consultants Ltd (RCL). It includes or refers to the following: The annual review process Internal company communications Project based approach to work Company documentation System for rectifying defects Record retention time In general terms this manual describes the project-based approach used by the company. It is subject to an annual review in accordance with Board policy. 2 SCOPE The quality manual covers all aspects of work within RCL and is intended to implement the Quality Policy defined by the Board in the Quality Policy Document {reference i}. 3 ANNUAL REVIEW PROCESS This section describes the contents and objectives of the annual quality review and also describes the role of the software security review Annual Quality Review The annual quality review should: Include a review of quality policy Include assessment of quality problem report resolutions (see issue management below) Include assessment of customer questionnaires and project reviews Identify any general regulatory requirements on the company Set the date for the next quality review Plan the development of the quality management system Plan how to improve the quality management system Identify board level training needs Scheduled annual company hardware asset utilisation plan identifying any needs Scheduled annual company software installation plan and identify any needs Perform annual industry technology review for presentation to the board identifying opportunities and likely issues for the company Take into consideration the results of the annual software security review Annual Software Security Review This is to be completed annually. It will focus on all aspects of IT security but in particular it must describe how client data is to be protected. In the future, the development of a security manual is also to be considered, as is a move towards compliance with BS7799. However, it is unlikely that this can be completed during the current annual cycle due to resource shortages, as current resources are committed to addressing other improvements to the overall quality system. RCL30114/MAN/
8 4 INTERNAL COMPANY COMMUNICATIONS This section describes how internal communications are organised within the company: The small nature of the company means that internal communication can be performed in a very simple and direct manner, in particular: After each monthly Board meeting the views of the Board are communicated to staff by a collective team brief. At this brief, the staff can pass back points and queries which will normally be addressed at the next Board meeting or more urgently by an individual Board member if required. The results of bi-weekly project meetings are communicated to team members either by the project manager briefing project members in a separate team meeting or more normally by the direct involvement of team members in the project management meetings. In addition the current size of the company means that an informal communication system can frequently be used in the company to great effect. 5 PROJECT BASED APPROACH TO WORK A project based approach to organisation of the quality system is employed by the company. This is described fully in the Guide to Project Based Working {Reference ii}. Within the company all activities are managed as if they were projects. This allows the application of an almost uniform quality process across the company. This process includes on-going internal activities such as human resources. When time permits, the process may be modified to avoid this incongruity by the addition of some complexity to the quality system, if this appears to be of benefit to the company. In addition, all projects are categorised according to their internal complexity or the required rigour of implementation as being between A for the most complex to C for the most straightforward. This is done to allow a graded application of quality assurance tailored to each client's financial capabilities, requirements and approach. 5.1 Internal Projects As already stated within the company, there is a number of key internal standing projects listed in the table below. Each of these projects governs an area activity within the company. To find more detailed information about the purpose of each area, who is responsible for the area and any applicable standards, documentation and deliverables the identified Project Quality Plan (PQP) listed in the table should be consulted. Project ID Project Title PQP Reference RCL30114 Quality RCL20103/PLN/1504 RCL30124 Health and Safety RCL30124/PLN/2100 RCL30125 Environment RCL30125/PLN/3101 RCL30117 Human Resources RCL30117/PLN/1504 RCL20102 Technical Infrastructure RCL20102/PLN/5535 RCL30123 Training RCL30123/PLN/2500 RCL20103 General Administration RCL20103/PLN/ RCL30114/MAN/
9 Note that although the general administration project controls a number of entities called projects in the document management system these do not constitute projects from a quality management system perspective. They are: RCL General Finance RCL General Sales and Marketing RCL Facilities Management RCL Training Room RCL Local Support Similarly there is also a number of projects in the document management system which are used solely to generate a series of documents with unique references. These are also not to be confused with projects from a quality management system perspective: RCL Invoices RCL Software Delivery Notes RCL Asset Register RCL Reviews RCL Change Requests RCL Test Records RCL Test Specification 6 COMPANY DOCUMENTATION Overall guidance for the operation of the company is set in the Corporate Policy Document {Reference i}. This is reviewed annually and states the general intentions of the Board for communication to all employees. Individual elements in the company document system are mostly described in one of two other key documents and these should be referred to for more detail. They are: Guide to project based working {Reference ii} The Software Development Procedure {Reference iii} Two other principal documents describe the control of information within the company, together with any externally supplied documents and information. These are: Document Control Procedure {Reference iv} Source code control procedure {Reference v} The day to day operation of key company systems and their associated documentation is described by three other key documents. These are: Human Resources Manual {Reference x} Financial Procedures {Reference xi} Health and Safety procedures {Reference xii} Sales and Marketing Manual {Reference xiv} Supply Chain Manual {Reference xv} Environmental Management Manual {Reference xvi} Finally two other potential documents, which are not currently formally implemented, are also described below. These are: RCL30114/MAN/
10 Software Operation Manual Software Maintenance Manual A diagram giving an overview of how the company documents relate to one another is given in Appendix B. 6.1 Guide To Project Based Working The first of these, the guide to project-based working, has been mentioned above and describes the central role of the Project Quality Plan (PQP) and associated documentation in managing company projects. It also describes how projects are to be organised and managed within the company. 6.2 Software Development Procedure The second document describes the processes to be applied for the development of software, which is the company s primary activity. The appropriate use of documents and techniques to be employed in this activity within the company is also described. The company Code Review Procedure {Reference b} is particularly significant part of the software development process for ensuring the appropriate quality of end products. 6.3 Document Control Procedure The document control procedure describes the control and identification of the conventional documents and externally supplied media which essentially change slowly over time through a revision or require a unique identification process. This process is automated through the use of the company's Project Documentation System (PDS) which is described in the first document. Currently approvals are logged by scanning the front sheet signature into the approved directory in PDS but RCL is planning to include electronic approval of documents in the enhanced PDS system. The new system should also provide access to the most recent documents only, by default. Currently, PDS does not prevent the accidental use of obsolete documents. 6.4 Source Code Control Procedure The source code control procedure describes the processes used to control the detailed changes required for the source code of a project by the use of the server based Subversion code control system (SVN). Its use is not limited to source code control but is used for any information requiring fine grained distributed control such as the user s calendar backups. Backups are used to preserve products and components and data as described in the related General Backup Procedure {Reference e} 6.5 Human Resources Manual This document concerns itself with aspects of the company relating to human resources. Its purpose is to ensure that RCL is compliant with any current legal requirements and that the welfare of the staff is considered during operations. This document describes the procedures for the: Maintenance of personal and training records Induction of new employees 4 RCL30114/MAN/
11 Dismissal of employees Employee review process Maintenance of training records Maintenance of the employee handbook {Reference a} The disciplinary and grievance procedure {Reference d} Control of employee contracts Monitoring of subcontractors 6.6 Financial Procedure This document records the procedures to be applied governing the financial activities of the company. 6.7 Sales and Marketing Manual This document records the procedures to be applied governing the sales and marketing activities of the company. It focuses on details of how the company should present itself on the Internet, how marketing procedures should be performed and how tenders should be constructed. 6.8 Supply Chain Manual This document describes the processes related to purchasing, including the selection of components, inspection and tracking of items. The processing of faulty components is also included in this document. 6.9 Health and Safety Procedure This document describes the health and safety procedures to be applied to the core activities within RCL. This document is intended to be expanded to cover more areas of work as part of a continual process of improvement. Related to this is the company's Accident Reporting Procedure {Reference c} 6.10 Environmental Management Manual This document describes the processes to be applied to the management of the environmental impact of all the company's activities and sets out review periods and processes for the company Software Operation Manual This document describes the use of software in the company. It is currently stored in the source library as html pages under It is intended that these documents should be transferred into the company PDS document server as a formal document or set of documents at a later date Software Maintenance Manual This document should be created to describe the maintenance operations performed by RCL. It has not been formalised because there is very little maintenance work performed outside the normal development cycle. However, as the company pursues its objective of creating a set of standard product-based deliverables, this document should be created to formalise activities in this area Information Security Procedure The company information security procedures are defined in this document. Each year, the Board will appoint an information security manager who will be responsible for company information security. The information security procedure should be reviewed RCL30114/MAN/
12 annually and updated by the information security manager. An information security review should also be produced each year by the information security manager. The review will recommend courses of action for company information security over the next year to be approved by the Board. 7 AUDIT All internal processes at RCL are potentially subject to audit in order to check processes for operation in accord with the company's goals and procedures. There are three causes of audits which are identified below: Areas which were identified as requiring improvements as part of the annual quality review should be audited. These will be identified in the annual quality report. Randomly selected key areas for 'spot check' audits identified by the quality manager during the year. The nature of the business means that most audits are likely to focus on aspects of the software development process. When audits are requested by clients as part of a contractual obligation. In all of the above cases, it is the responsibility of the quality manager, who is appointed annually by the Board, to ensure that suitably qualified or experienced staff are appointed to perform any audits and that the associated audit reports are completed. Persons performing audits should preferably be trained as auditors but must at least have sufficient knowledge and familiarity with the type of process being audited to be able to make useful judgements about the compliance of processes to the intended procedures. Each audit shall produce a report as an output. Audit reports should include recommendations of any changes required in existing procedures or identify any non conformances and record them as problem reports within the issue management system. 8 ISSUE SUE MANAGEMENT This system describes the defect rectification system employed at RCL 8.1 Review Processes This section describes the review processes applied within the company. If any of these review processes identify issues which cannot be immediately resolved, they are recorded for resolution in either the minutes of an appropriate meeting or in the company action tracking database described below Annual Quality System Review Annually, the board initiates a review of the whole Quality Management System and as a result agrees a set of aims and objectives for the following year. This has already been described in section 3 above. 6 RCL30114/MAN/
13 8.1.2 Customer Feedback On completion of a project, customer feedback is sought by requesting the completion of a form. This information will be reviewed at the project closeout meeting and any possible defects recorded. Any defects identified must be resolved or logged in an external system to the project before the project can be closed Course Participant Reviews Following a course, supplied by RCL, the views of participants are sought and any defects arising are recorded in meeting minutes or as an action tracking system problem report Staff Appraisals Another form of system assessment, particularly in the area of staff training, is the annual staff appraisal. This is used not only to record staff training needs within the human resources system but also any other company operational issues that may require resolution. As with other matters, these are either recorded in meeting minutes or in the action tracking database Project Closeout Review Project closeout reviews are intended to assess the overall performance of a project. This is normally performed as a part of the project closeout meeting, where staff members are invited to supply their perceptions about the project and also attempt to identify any defects in the project's processes. This review will be structured to focus on the following areas; Human Resources and Training Project Management and Planning Coding Documentation Testing Quality Client Relations Sales and Marketing The project team members are asked to identify at least one positive outcome in each area before also identifying any defects that arose in the area. They are then asked to propose changes in process to ensure good outcomes are repeated and process failures are eliminated. Any other issues identified during the project, together with any recommendations, must be resolved or transferred to another project before the first project can be closed. A project closeout report must be produced summarising the outcome of the meeting. This will also include any quality data collected as described below. The project manager is also responsible for producing a re-estimate of the amount of work required to complete the project as part of the project closeout report. This is recorded to improve future estimation processes when similar work is tendered for. RCL30114/MAN/
14 8.1.6 Quality Data Collection The non-standard nature of the company's processes mean that qualitative measures are the most appropriate for monitoring quality improvements. The project process will be assessed on a numeric scale by all available staff involved on the project in order to identify how well the project was performed in each of the review areas identified in above. The assessment is performed by the member of staff giving a rating from 0% (complete failure) to 100% (unqualified success) by marking a line between two points. This can then be measured to determine a percentage 'success' figure. The figures from each project over the year will be averaged and presented in the annual quality review to give a numeric indication of areas which are not thought to be improving and should be subject to further consideration by the quality department. 8.2 Quality Centres C and Action Tracking This section describes how non conformity data is controlled by the action tracking databases. As already stated all activity in the company is treated as a project. Projects are frequently initiated by a single commercial contract but the nature of software development that projects are not cleanly closed and will tend to continue as a chain of contracts as long as clients remain interested in activities such as support. This is discussed further in the Guide to Project Based Working {Reference ii}. Most projects are also identified as Quality Centres (QC), unless they are purely used for administrative or record keeping purposes. As a result, normally, all departmental and development projects are quality centres. Each quality centre represents a subdivision in the common company action tracking database. A manager is assigned to each quality centre and is responsible for progressing any issues reported against that quality centre. Possible defects that are observed within the company should normally be logged in the company action tracking database against the relevant project quality centre. If no suitable quality centre can be identified then the Quality Project quality centre is used as a default. The current company quality manager is always assigned as the project manager of the quality project. As such he is responsible for ensuring the resolution of any issues assigned to the Quality QC. Normally, technical issues related to a project will be dealt with by that project s own issue tracking mechanism. If for some reason this system fails or the issue cannot be resolved at a project level, then by default the issue will become a quality system issue. The resolution of all quality management issues will be documented in the minutes of the Quality Project bi-weekly project management meeting Project Technical Issues Technical project issues such as defects in documentation, code or project specific processes will be dealt with in the following way: 8 RCL30114/MAN/
15 Recorded for resolution against the project-specific problem quality centre in the company action tracking database held as part of the RCL document management system. Progress on these issues will normally be recorded by the Code Custodian who will report their status to the bi-weekly project management meeting. The project manager of each project is responsible for ensuring that the project management team review and progress problems in the problem database as part of the bi-weekly meeting. Alternatively problems can be reported directly to the project manager, who is responsible for either ensuring the issue is resolved or calling an immediate project management meeting to bring the matter to resolution. Issues which cannot be dealt with in this manner should be treated as Quality System Issues (see below) Quality System Issues Any quality system issues will be dealt with in the following way: They will be recorded against the Quality QC in the company problem reporting and action tracking database in the RCL document management system, and will be reviewed at the bi-weekly project management meeting. The quality manager, who is also project manager of the ongoing quality project, is responsible for ensuring that the quality management team review and progress problems in the problem database as part of the weekly meeting. Alternatively, problems can be reported directly to an RCL Board member who is responsible for resolving the issue and reporting the issue to the Board at the next meeting or calling a Board meeting to bring the matter to resolution in a timely manner. 9 RECORD RETENTION Currently there is an outstanding defect identified within the quality management system because no record retention times have been set. This is partially because there is no capacity for setting review periods or retention times within the existing document management system. Within the new document management system retention times will be established for: Project / Customer Review records Annual policy review Monthly board minutes and actions Quality project actions and minutes Project management minutes and actions Project quality plans Staff HR records Staff appraisal records Staff training records Financial records Health and safety records RCL30114/MAN/
16 Company policy documents Company procedures 10 REFERENCES References from this document are tabulated below. I ii iii iv v vi vii viii ix x xi xii xiii xiv xv xvi xvii Corporate Policy RCL30114/PLN/1501 Guide To Project Based Working RCL20103/PRC/1009 Software Development Process RCL20102/PROC/5516 Document Control Procedure RCL20102/PROC/5511 Source Code Control Procedure RCL20105/PROC/5510 Security Review RCL20112/RVW/5518 Project Quality Plan Template RCL20103/PLN/1007 Cat. C Project Quality Plan Template RCL20103/PLN/1028 User Requirements Template RCL20103/PRC/1012 Human Resources Manual RCL30117/PRC/1527 Financial Procedures RCL20101/PRC/5017 Health and Safety Procedures RCL30124/PRC/20103 Quality Management Review RCL30114/RVW/1500 Sales and Marketing Manual RCL30105/MAN/5008 Supply Chain Manual RCL30146/DOC/9751 Environmental Management Manual RCL30125/DOC/3105 Information Security Procedure RCL30147/PRC/3502 Indirect references to other company procedures and guides: a b c d e f Staff Handbook RCL30117/PRC/1510 Code Review Procedure RCL20102/PROC/5517 Accident Reporting Procedure RCL30114/RVW/1500 Disciplinary and Grievance Procedure RCL30117/PRC/1502 General Backup Procedure RCL20102/PRC/5519 Security Handbook RCL30147/NTS/ RCL30114/MAN/
17 g Security Induction Presentation RCL30123/NTS/2506 RCL30114/MAN/
18 APPENDIX A - GLOSSARY The table below presents a glossary of terms associated with the pod pre processing system user requirements. Term FS PQP QA QMS PR Description Functional Specification Project Quality Plan Quality Assurance Quality Management System Problem Report (Issue) 12 RCL30114/MAN/
19 APPENDIX B RCL QUALITY DOCUMENTS Quality Manual 13 RCL30114/MAN/
The World Bank Audit Firm Assessment Questionnaire
The World Bank Audit Firm Assessment Questionnaire Assessment of audit firms in the Africa Region Background The Bank s financial management Bank Procedures (BP) and Operations Policy (OP) (BP/OP 10.00)
More informationBARMARK Requirements. Replacing QUALITY ASSURANCE FOR CHAMBERS
BARMARK Requirements Replacing QUALITY ASSURANCE FOR CHAMBERS Page 1 INTRODUCTION TO THE BARMARK REQUIREMENTS Thank you for taking the time to request or download a copy of the BARMARK Requirements. BARMARK
More informationCANDIDATE DATA PROTECTION STANDARDS
CANDIDATE DATA PROTECTION STANDARDS I. OBJECTIVE The aim of these Candidate Data Protection Standards ( Standards ) is to provide adequate and consistent safeguards for the handling of candidate data by
More informationQuality Manual. Print Name Title Date Prepared by L Naughton QA Consultant 9 th April 09. Reviewed by Bernard Lennon Fire and Safety Officer
Quality Manual Print Name Title Date Prepared by L Naughton QA Consultant 9 th April 09 Reviewed by Bernard Lennon Fire and Safety Officer 9 th April 09 Corporate Authorisation Joe Hoare Estates Officer
More informationQuality Manual DRAFT. Quality Management Plan Version A1 Date: <22/01/11> Page 1 of 17
Quality Manual DRAFT Page 1 of 17 Document Acceptance and Release Notice This is Revision A1 of the East Coast Designer Builders Quality Manual. The Manual is a managed document. For identification of
More informationSecurity Operations. BS EN ISO 9001: 2008 Issue 1.2: 21/10/2016. Quality Manual. Managing Director. Controlled / Uncontrolled when printed
of Security Operations BS EN ISO 9001: 2008 : 21/10/2016 Manual No. 1 Issued to Managing Director Authorised By Date Issued 21/10/2016 Controlled / Uncontrolled when printed SECTION: 0 Index Page 2 Note
More informationINS QA Programme Requirements
Specification Date: 20/3/17 INS QA Programme Requirements UNCONTROLLED WHEN PRINTED Author: J Cooch AUTHORISATION Date: 20/3/17 A Brown Owner: J Cooch (Signature) N.B. only required for hard copy If issued
More informationKing III Chapter 2 Board Charter. September 2009
Chapter 2 Board Charter September 2009 The information contained in this Practice Note is of a general nature and is not intended to address the circumstances of any particular individual or entity. The
More informationAircraft Manufacturing Organisations Certification
Civil Aviation Rules Part 148, Amendment 4 Docket 8/CAR/1 Contents Rule objective... 3 Extent of consultation... 3 Summary of submissions... 3 Examination of submissions... 4 Insertion of Amendments...
More informationBowmer. & Kirkland. Kirkland. & Accommodation. Health & Safety Policy.
Bowmer Kirkland & Kirkland & Accommodation Health & Safety Policy December 2013 www.bandk.co.uk Index Policy Statement Page 3 Interaction of Health and Safety Responsibilities Page 5 Organisation Page
More informationAS9003A QUALITY MANUAL
Your Logo AS9003A QUALITY MANUAL Origination Date: (month/year) Document Identifier: Date: Document Status: Document Link: AS9003A Quality Manual Latest Revision Date Draft, Redline, Released, Obsolete
More informationBank of Botswana Internal Audit Charter March 22, 2010 INTERNAL AUDIT CHARTER BANK OF BOTSWANA
INTERNAL AUDIT CHARTER BANK OF BOTSWANA CONTENTS PAGE 1. PURPOSE OF THE INTERNAL AUDIT CHARTER 3 2. POLICY STATEMENTS 3 2.1 Establishment of the Internal Audit Function in the Bank 3 2.2 Vision 3 2.3 Mission
More informationIntegrated Management System Manual
QUALITY & ENVIRONMENTAL MANAGEMENT SYSTYEMS Integrated Management System Manual ISO 9001:2008, 14001:2004 and OHSAS 18001: 2007 Document ID: IMS Manual/ Rev. No. 00/ Rev. Date: 01-Jun-2009/ Page 1 of 19
More informationQuality Manual ISO 9001:2000
Quality Manual ISO 9001:2000 Page 2 of 23 TABLE OF CONTENTS COVER PAGE...1 TABLE OF CONTENTS...2 SIGNATURES...3 QUALITY POLICY...4 INTRODUCTION...5 CORPORATE PROFILE...9 4.O QUALITY MANAGEMENT SYSTEM...10
More informationISO 28002: RESILIENCE IN THE SUPPLY CHAIN: REQUIREMENTS WITH GUIDANCE FOR USE
Version 1b: September 5, 2009 ISO 28002: RESILIENCE IN THE SUPPLY CHAIN: REQUIREMENTS WITH GUIDANCE FOR USE Draft Version 1b: September 5, 2009 Abstract A comprehensive management systems approach to prevent,
More informationIG01 Information Governance Management Framework
IG01 Information Governance Management Framework 1 INFORMATION GOVERNANCE MANAGEMENT FRAMEWORK Document History Document Reference: IG01 Document Purpose: The document compliments all other Information
More informationFEC QUALITY MANUAL. Federal Equipment Company River Rd. Cincinnati, Ohio
QMS-20 2016 FEC QUALITY MANUAL Federal Equipment Company 5298 River Rd Cincinnati, Ohio 45233 www.federalequipment.com www.fecheliports.com www.usdrillhead.com www.orionseals.com www.tkf.com REVISION:
More informationBank of Botswana Internal Audit Charter March 18, 2013 INTERNAL AUDIT CHARTER BANK OF BOTSWANA
INTERNAL AUDIT CHARTER BANK OF BOTSWANA 1 CONTENTS PAGE 1. PURPOSE OF THE INTERNAL AUDIT CHARTER 3 2. PURPOSE OF THE INTERNAL AUDIT DIVISION 3 3. POLICY STATEMENTS 3 3.1 Establishment of the Internal Audit
More informationNSW Government Capability Framework - Benchmark Job Evaluations. NSW Department of Premier and Cabinet
NSW Government Capability Framework - Benchmark Job Evaluations NSW Department of Premier and Cabinet Contents 1. Work Value Assessments...1 Human Resources...1 Engineering...1 Finance...1 Legal...2 Project
More informationGENERAL AND ORGANISATIONAL REQUIREMENTS
NBOG working document applicable for MDR and IVDR WD 2017-1 Draft list of documents to be submitted in the application for designation as a notified body under Regulation (EU) 2017/745 and Regulation (EU)
More informationQUALITY MANAGEMENT SYSTEM QUALITY MANUAL ISO 9001:2008
QUALITY MANAGEMENT SYSTEM QUALITY MANUAL ISO 9001:2008 EXPRESS CONTRACTING SERVICES PTY LTD TRADING AS GOLDEN BROWN CLEANING SERVICES Unit 8/217 Mickleham Road Tullamarine VIC 3043 www.goldenbrown.com.au
More informationQuality Control Review Checklist
Institute of Cost and Management Accountants of Pakistan Quality Control Review Checklist For Cost Audit Engagements Issued By Quality Assurance Board Table of Contents 1. PRE ENGAGEMENT ACTIVITIES...
More informationISO /TS 29001:2010 SYSTEMKARAN ADVISER & INFORMATION CENTER SYSTEM KARAN ADVISER & INFORMATION CENTER
SYSTEM KARAN ADVISER & INFORMATION CENTER PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES -- SECTOR-SPECIFIC QUALITY MANAGEMENT SYSTEMS -- REQUIREMENTS FOR PRODUCT AND SERVICE SUPPLY ORGANIZATIONS
More informationLoch Lomond & The Trossachs National Park Authority. Annual internal audit report Year ended 31 March 2015
Loch Lomond & The Trossachs National Park Authority Annual internal audit report Year ended 31 March 2015 Contents This report is for: Information Chief executive Audit committee Jaki Carnegie, director
More informationMETUCHEN CAPACITORS INCORPORATED. Quality Manual P.O. BOX HIGHWAY 35, SUITE 2 HOLMDEL NJ USA
METUCHEN CAPACITORS INCORPORATED Quality Manual P.O. BOX 399 2139 HIGHWAY 35, SUITE 2 HOLMDEL NJ 07733 USA Copy Holder Copy Number : 1 This Quality Manual Covers the activities and functions performed
More informationOracle Process Manufacturing
Oracle Process Manufacturing Accounting Setup User s Guide Release 11i September 2001 Part No. A77487-03 Oracle Process Manufacturing Accounting Setup User s Guide, Release 11i Part No. A77487-03 Copyright
More informationASA-100 QUALITY MANUAL
Your Company Name ASA-100 QUALITY MANUAL Origination Date: XXXX Document Identifier: Date: Document Revision: QMS-00 Quality Manual Latest Revision Date Abstract: This quality manual describes (your Company's)
More informationVLOG Ohne Gentechnik Production and Certification Standard Revision Information
VLOG Ohne Gentechnik Production and Certification Standard Revision Information Below, you will find a list of all the significant revisions made to the VLOG "Ohne Gentechnik" Production and Certification
More informationIAF Mandatory Document. Accreditation Assessment of Conformity Assessment Bodies with Activities in Multiple Countries. Issue 2 IAF MD 12:2016
IAF Mandatory Document Accreditation Assessment of Conformity Assessment Bodies with Activities in Multiple Countries Issue 2 IAF MD 12:2016 2016 Issue 2 Accreditation Assessment of Conformity Page 2 of
More informationISO/TS TECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION ISO/TS 29001 Third edition 2010-06-01 Petroleum, petrochemical and natural gas industries Sector-specific quality management systems Requirements for product and service supply
More informationAnnals of Library Science and Documentation 44, 3; 1997; APPLICATION OF ISO-9000 FOR LIBRARY AND INFORMATION SERVICES
Annals of Library Science and Documentation 44, 3; 1997; 81-85. APPLICATION OF ISO-9000 FOR LIBRARY AND INFORMATION SERVICES KAMAL NARAYAN JHA Ms. VEENA MISHRA BNSINHA R&D Centre for Iron & Steel Steel
More information7.11b: Quality in Project Management: A Comparison of PRINCE2 Against PMBOK
by Peter Whitelaw, Rational Management Pty Ltd, Melbourne Introduction This comparison takes each part of the PMBOK and provides comments on what match there is with elements of the PRINCE2 method. It's
More information3. STRUCTURING ASSURANCE ENGAGEMENTS
3. STRUCTURING ASSURANCE ENGAGEMENTS How do standards and guidance help professional accountants provide assurance? What are the practical considerations when structuring an assurance engagement? 3. STRUCTURING
More informationQuality and Environmental Business Process Manual
PMC SOIL SOLUTIONS 2 Fountain Court Victoria Square St Albans Hertfordshire AL1 3TF T: 01727 822500 F: 01727 821600 E: headoffice@pmcsoilsolutions.com W: www.pmcsoilsolutions.com Quality and Environmental
More informationQUALITY MANAGEMENT SYSTEM POLICIES AND PROCEDURES
Your Company Name QUALITY MANAGEMENT SYSTEM POLICIES AND PROCEDURES Origination Date: XXXX Document Identifier: Date: Document Revision: QMS-00 QMS Policies and Procedures Latest Revision Date Abstract:
More informationDeveloper Constructed Headworks Process. Information Guide. 1. watercorporation.com.
Developer Constructed Headworks Process 1. watercorporation.com. Contents Developer Constructed Headworks Process... 1... 1 Contents... 2 1. Introduction... 3 1.1. Purpose and Objectives... 3 1.2. The
More informationHF GROUP LIMITED BOARD CHARTER
The primary objective of the Group's Board Charter is to set out the responsibilities of the Board of Directors ("the Board") of HF Group and its subsidiaries. The Board of the Parent Company, HF Group,
More informationPatent Cooperation Treaty (PCT)
E ORIGINAL: ENGLISH DATE: DECEMBER 3, 2015 Patent Cooperation Treaty (PCT) Common Quality Framework for International Search and Preliminary Examination INITIAL REPORT ON QUALITY MANAGEMENT SYSTEMS prepared
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 9001 Quality management systems Requirements Systèmes de management de la qualité Exigences Fourth edition 2008-11-15 Reference number ISO 9001:2008(E) ISO 2008 PDF disclaimer
More informationDocument Number: QM001 Page 1 of 19. Rev Date: 10/16/2009 Rev Num: 1. Quality Manual. Quality Manual. Controlled Copy
QM001 Page 1 of 19 Quality Manual QM001 Page 2 of 19 Table of Contents Page Company Profile 4 Approval 4 Revision History 4 Distribution List 4 1.0 Scope 5 Section 2: Normative Reference 6 2.0 Quality
More informationEN39 TUBE ASSESSMENT REPORT. Assessment Summary
EN39 TUBE ASSESSMENT REPORT : Category: Manufacturer Manufacturer Manufacturer Manufacturer Location: Name: Location Location Location Location Previous Assessment Category: N/A Meeting With: Assessment
More informationThe SIA Approved Contractor Scheme. Self Assessment Workbook
The SIA Approved Contractor Scheme Self Assessment Workbook DRAFT PROPOSAL FOR CHANGE ACS REVIEW MARKET TESTING DRAFT PROPOSAL FOR TESTING JANUARY 2018 Page 1 of 86 NOT TO BE CIRCULATED Contents The ACS
More informationREQUEST FOR INFORMATION HUMAN RESOURCE INFORMATION SYSTEM. No. FY
REQUEST FOR INFORMATION HUMAN RESOURCE INFORMATION SYSTEM No. FY18-0002 Page 1 of 8 TABLE OF CONTENTS I. Summary... 3 II. Background... 3 III. Minimum Requirements... 3 IV. Timeline... 4 V. Contact...
More informationProject Plan. CxOne Guide
Project Plan CxOne Guide CxGuide_ProjectPlan.doc November 5, 2002 Advancing the Art and Science of Commercial Software Engineering Contents 1 INTRODUCTION... 1 1.1 DELIVERABLE PURPOSE... 1 1.2 LIFECYCLE...
More informationWe take care of it. Company Manual
We take care of it. Company Manual Quality Management System based on ISO 9001:2015 1. COMPANY POLICY...3 1.1. Company Mission Statement...3 1.2. Company Quality...3 2. PRODUCTS AND SERVICES...4 3. ORGANISATION...6
More informationGOVERNANCE HANDBOOK COMMUNITY REHABILITATION COMPANIES PUBLIC SECTOR OWNERSHIP MAY May
GOVERNANCE HANDBOOK COMMUNITY REHABILITATION COMPANIES PUBLIC SECTOR OWNERSHIP MAY 2014 May 2014 1 CONTENTS 1. Introduction 3 2. Community Rehabilitation Companies Background and Legal Basis 3 3. NOMS
More informationAccepting Supplier ISO 9000 Quality Programs
Accepting Supplier ISO 9000 Quality Programs IEEE Subcommittee on Qualification October 7-8, 2004 Leigh A. Aparicio PSE Technical Leader aparicio@epri.com Project Overview ISO 9000 Phase I Initiated in
More informationAVNET Logistics & EM Americas. Quality Manual
AVNET Logistics & EM Americas Quality Manual Avnet is committed to ensuring customer satisfaction while meeting all customer and applicable legal, statutory and regulatory requirements. This is accomplished
More informationQCC Global Ltd. United Nations Global Compact. Communications on Progress. From May 2016 to May QCC Keeping your business, your business
QCC Global Ltd United Nations Global Compact Communications on Progress From May 2016 to May 2017 Date 13 April 2016 QCC Keeping your business, your business 1 ISO Document Control Details The following
More informationContinuing Professional Education
Education Committee December 2014 Continuing Professional Education CPE Regulations These Regulations are issued by the Malta Institute of Accountants under Section 4 of the Institute s Statute to establish
More informationVer-Bolt (Pty) Ltd Supplier Application Form. General Information
Appendix I Ver-Bolt (Pty) Ltd Return Address Postal Address PO.Box 2041 Vereeniging Physical Address 2De Villiers Ave Duncanville Vereeniging Contact Details Tel: 0861 837 2658 Fax: 016 421 1729 E-mail:
More information25 D.L. Martin Drive Mercersburg, PA (717)
QUALITY MANUAL D. L. MARTIN CO. 25 D.L. Martin Drive Mercersburg, PA 17236 (717) 328-2141 Revision 14 August 2012 Michael A. White Manager, QA & Engineering D.L. Martin Co. Quality Manual UNCONTROLLED
More informationNational Occupational Standards. for. Project Management
National Occupational Standards for Project Management Version 1.01 March 2003 Page 1 Comment Observations and comment for future consideration of this document may be directed to: ECITB Blue Court 1 Church
More informationContinuing Professional Education CPE Regulations
Education Committee January 2017 Continuing Professional Education CPE Regulations These Regulations are issued by the Malta Institute of Accountants under Section 4 of the Institute s Statute to establish
More informationDEVELOPEMENT OF A PRODUCTION ORGANIZATION EXPOSITION SCHEME TAKING INTO ACCOUNT EN9100 REQUIREMENTS
25 TH INTERNATIONAL CONGRESS OF THE AERONAUTICAL SCIENCES DEVELOPEMENT OF A PRODUCTION ORGANIZATION EXPOSITION SCHEME TAKING INTO ACCOUNT REQUIREMENTS Reyhaneh SAYFI*, Florence Leblond** * Civil Aviation
More informationJ. McCann & Co (Nottm) Ltd McCann House 110 Nottingham Road Chilwell Nottingham NG9 6DQ. Quality Manual
McCann House 110 Nottingham Road Chilwell Nottingham NG9 6DQ Quality Manual Quality Manual Issue I Dated 8 th October 2012 Contents Page Section 1 - Introduction 2 Section 2 - Company Details 2 Section
More informationQUALITY MANUAL. AMSANT Aboriginal Corporation
AMSANT Aboriginal Corporation QUALITY MANUAL Scope: This Quality Management System relates to the management and provision of primary health care services provided by AMSANT Aboriginal Corporation. Exclusion:
More informationSQF 2000 Guidance. Guidance for Food Sector Category 4 Fresh Produce Pack House Operations. 1st Edition
SQF 2000 for Food Sector Category 4 Fresh Produce Pack House Operations 1st Edition SEPTEMBER 2010 Safe Quality Food Institute 2345 Crystal Drive, Suite 800 Arlington, VA 22202 USA 202-220-0635 www.sqfi.com
More informationAS9003A QUALITY MANUAL
AS9003A QUALITY MANUAL Origination Date: (month/year) Document Identifier: Date: Document Status: Document Link: AS9003A Latest Revision Date Draft, Redline, Released, Obsolete Location on Server (if used)
More informationACCOUNTING SYSTEM/PROMPT PAYMENT
ACCOUNTING SYSTEM/PROMPT PAYMENT FILE: DIA TITLE: Timely Settlement of District Liabilities POLICY: Each principal or other person in charge of district funds used for external procurement of goods or
More information(Adopted by the Board of Directors on 13 May 2009 and amended on 24 September 2009, 13 September 2012 and 27 November 2013)
Thomas Cook Group plc THE AUDIT COMMITTEE TERMS OF REFERENCE (Adopted by the Board of Directors on 13 May 2009 and amended on 24 September 2009, 13 September 2012 and 27 November 2013) Chairman and members
More informationQuality Assurance Manual
Quality Assurance Manual Current Electrical is committed to leading the market in satisfying customer needs by providing versatile and innovative electrical and control solutions We take pride in the ability
More informationQuality management systems
L E C T U R E 9 Quality management systems LECTURE 9 - OVERVIEW Quality management system based on ISO 9000 WHAT IS QMS (QUALITY MANAGEMENT SYSTEM) Goal: Meet customer needs Quality management system includes
More informationPROBUILD GUIDE SUBCONTRACTOR QUALITY MANAGEMENT. Section Two Project Specific Quality Management Plans. Version No 1.
PROBUILD SUBCONTRACTOR QUALITY MANAGEMENT GUIDE Section Two Project Specific Quality Management Plans Version No 1. PREFACE This document has been developed to assist subcontractors to meet Probuild s
More informationVolunteering Victoria. Board Charter. Directors Code of Conduct
Volunteering Victoria Board Charter And Directors Code of Conduct Contents 1. Introduction and governance principles... 4 2. Role of the Board... 4 2.1 Overall role... 4 2.2 Board term and composition...
More informationAEROSPACE STANDARD. Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing
AEROSPACE STANDARD AS9100 Technically equivalent to AECMA pren 9100 Issued 1999-11 Revised 2001-08 Superseding AS9100 REV. A Quality Systems - Aerospace - Model for Quality Assurance in Design, Development,
More informationISO AUDIT PREPARATION KIT 2016
ISO AUDIT PREPARATION KIT 2016 IQY Technical College Table of Contents ISO... 3 ISO 9001:2008 Fact Sheet... 6 Further Information... 6 Preparing for the ISO 9001:2008 Audit - 2016... 7 ISO 9001:2008 Definitions...
More informationLevel 5 NVQ Diploma in Management and Leadership Complete
Learner Achievement Portfolio Level 5 NVQ Diploma in Management and Leadership Complete Qualification Accreditation Number: 601/3550/5 Version AIQ004461 Active IQ wishes to emphasise that whilst every
More informationAssessment of the effectiveness of the audit process
Assessment of the effectiveness of the audit process 1 Next When should the review be completed? We acknowledge that it is unlikely that audit committees will wish to do a comprehensive review suggested
More informationQUALITY MANUAL DISTRIBUTION. Your Logo Here. Page 1 1 of 57. Rev.: A
Page 1 1 of 57 President Design Engineering Production Production Engineering Materials Control Purchasing Service Marketing Sales Contracts Human Resources Quality Assurance Quality Control Production
More informationSAMOA INSTITUTE OF ACCOUNTANTS QUALITY ASSURANCE (QA) FOR AUDIT REVIEWER (CONTRACTOR SERVICES)
SAMOA INSTITUTE OF ACCOUNTANTS QUALITY ASSURANCE (QA) FOR AUDIT REVIEWER (CONTRACTOR SERVICES) INVITATION TO TENDER INTRODUCTION The Samoa Institute of Accountants (SIA) is the national professional accountancy
More informationProject Management Techniques
ALUMASA QATAR Project Management Techniques A project is usually one time effort. Although similar work may have been done previously, every project has its own features and therefore is of non-repetitive
More informationBS EN ISO 9001 QUALITY ASSURANCE MANUAL
PAC PRICE ARTHUR CONSULTANCY BS EN ISO 9001 QUALITY ASSURANCE MANUAL COPY NO: 025 ISSUE: 4 QUALITY ASSURANCE MANUAL BS EN ISO 9001 CONTENTS PAC Price Arthur Consultancy - Building Services Consulting Engineers
More informationAudit Report. Audit of Contracting and Procurement Activities
Audit Report August 2012 Recommended for Approval to the Deputy Minister by the Departmental Audit Committee on October 12, 2012 Approved by the Deputy Minister on October 18, 2012 Table of Contents Table
More informationQuality Management System. Manual MASTER COPY
Quality Management System Manual MASTER COPY Revisions: Date Summary Rev. July 2010 14 Oct 2010 28 Jan 2011 9 Feb 2011 9 June 2011 6 March 2012 11 July 2013 13 July 2017 Initial Draft Issued Minor changes
More informationEPICOR, INCORPORATED QUALITY ASSURANCE MANUAL
EPICOR, INCORPORATED QUALITY ASSURANCE MANUAL Revision: 6 Date 05/18/09 EPICOR, INCORPORATED 1414 E. Linden Avenue P.O. Box 1608 Linden, NJ. 07036-0006 Tel. 1-908-925-0800 Fax 1-908-925-7795 Table of Contents:
More informationEXHIBIT A SCOPE OF SERVICES FOR FINANCIAL PROJECT ID: DISTRICT TWO
EXHIBIT A SCOPE OF SERVICES FOR FINANCIAL PROJECT ID: 430959-1-22-01 DISTRICT TWO Stage I Scope A-1 August 2, 2017 SCOPE OF SERVICES DISTRICTWIDE ENVIRONMENTAL SERVICES FLORIDA DEPARTMENT OF TRANSPORTATION
More informationBS2482 TIMBER BOARDS ASSESSMENT REPORT. Assessment Summary
BS2482 TIMBER BOARDS ASSESSMENT REPORT : Category: Manufacturer Manufacturer Manufacturer Manufacturer Location: Name: Location Location Location Location Previous Assessment Category: N/A Meeting With:
More informationM-Files Contract Management Guide to Common Views
M-Files Contract Management Guide to Common Views The common views in M-Files CM make tracking and managing contracts easier than ever. What are views? Views are dynamic folders that allow for quick and
More informationEquality and Diversity Policy. August 2015
Equality and Diversity Policy August 2015 Contents Page no. Kier Group Plc 3 Statement of Intent 3 Core Policy 4 Forms of discrimination principles 4 Equality and diversity in recruitment, selection, development
More informationMedley Pharmaceuticals Limited
Model Letter Appointment of Independent Director Mr. ` Dear Mr. Date : SUBJECT: APPOINTMENT AS AN INDEPENDENT DIRECTOR I am pleased to inform you that upon recommendation of Remuneration Committee and
More informationTABLE OF CONTENTS 1.0 INTRODUCTION...
Advisory Circular Subject: Quality Assurance Programs Issuing Office: Civil Aviation, Standards Document No.: AC QUA-001 File Classification No.: Z 5000-34 Issue No.: 01 RDIMS No.: 9376810-V14 Effective
More information0. 0 TABLE OF CONTENTS
QUALITY MANUAL Conforming to ISO 9001:2008 0. 0 TABLE OF CONTENTS Section Description ISO 9001 Clause Page 0 TABLE OF CONTENTS n/a 2 1 PIMA VALVE, INC. DESCRIPTION n/a 3 2 QUALITY MANUAL DESCRIPTION 4.2.2
More informationContractor Safety Management Procedure
Contractor Safety Management Procedure Name: Approved by: Contractor Safety Management Procedure University Secretary Last reviewed: 9 February 2012 SECTION 1 - INTRODUCTION 2 PURPOSE 2 SCOPE 2 DEFINITIONS
More informationBOROUGH OF BERLIN. Municipal Planning Board Engineer. Term: January 1, 2018 to December 31, 2018.
BOROUGH OF BERLIN REQUEST FOR QUALIFICATIONS FOR MUNICIPAL ATTORNEY, MUNICIPAL AUDITOR, MUNICIPAL BOND COUNSEL, MUNICIPAL ENGINEER, MUNICIPAL WATER & SEWER ENGINEER, MUNICIPAL PROSECUTOR, MUNICIPAL PUBLIC
More informationAPS Cleaning Quality Management System Scope of Certification The provision of commercial and industrial cleaning services throughout Queensland.
Quality Management System Scope of Certification The provision of commercial and industrial cleaning services throughout Queensland. Table of Contents Contents 1. Introduction... 3 1.1. Process Approach...
More informationReliance Aerospace Solutions
Reliance Aerospace Solutions Quality Manual The information contained in this document is the property of Reliance Aerospace Solutions, a division of Reliance Steel & Aluminum Company This manual is a
More informationASME As a Help to Export! Our Topic today: Nuclear Quality Assurance ASME NQA 1
ASME As a Help to Export! Our Topic today: Nuclear Quality Assurance ASME NQA 1 Karte: Wikipedia CIS GmbH Experts in ASME Code Consulting CIS GmbH Consulting Inspection Services 3 rd Party Inspection Training
More informationQuality Management Evaluation & Audit Policy
Title Quality Management Evaluation & Audit policy Document ID Director Mark Reynolds Status Final Owner Neil McCrirrick Version 1.1 Author Mark Reynolds Version Date 07/11/2011 Quality Management Evaluation
More informationData Quality Policy
Cambridgeshire and Peterborough Clinical Commissioning Group (CCG) Data Quality Policy 2017-2019 Ratification Process Lead Author(s): Reviewed / Developed by: Approved by: Ratified by: Associate Director
More informationTHE NATIONAL PENSIONS FUND
VACANCIES VACANCIES THE NATIONAL PENSIONS FUND The National Pensions Fund (NPF) which operates under the aegis of the Ministry of Social Security, National Solidarity and Reform Institutions invites applications
More informationVFA SAMPLE RFP (DETAILED FACILITY CONDITION ASSESSMENT)
VFA SAMPLE RFP (DETAILED FACILITY CONDITION ASSESSMENT) I. Purpose As part of a strategic planning directive, the has decided to undertake a comprehensive condition audit and plant capital renewal
More informationAUDIT AND RISK COMMITTEE For Office of the Police Ombudsman for Northern Ireland. Terms of Reference. September 2016
AUDIT AND RISK COMMITTEE For Office of the Police Ombudsman for Northern Ireland Terms of Reference September 2016 This Terms of Reference (TOR) updates the previous Terms of Reference as at May 2014.
More informationQuality Management Review. MoDOT Dave Ahlvers P.E. Dennis Brucks P.E. Josh Kincaid P.E.
Quality Management Review MoDOT Dave Ahlvers P.E. Dennis Brucks P.E. Josh Kincaid P.E. Quality Management Introduction to Quality Management Dave Ahlvers, P.E. Review of Job Special Provision & Terms Dennis
More informationA Firm s System of Quality Control
A Firm s System of Quality Control 2759 QC Section 10 A Firm s System of Quality Control (Supersedes SQCS No. 7.) Source: SQCS No. 8; SAS No. 122; SAS No. 128. Effective date: Applicable to a CPA firm's
More informationISO 9001 QUALITY MANUAL
ISO 9001 QUALITY MANUAL Origination Date: 10/01/14 Document Identifier: AIF quality control manual Date: 10/01/14 Project: Customer review Document Status: Released Document Link: www.aeroindfast.com Abstract:
More informationQuality Systems Manual
Quality Systems Manual This manual was developed to support ISO 9001 elements 1445 Oakland Drive, San Jose, CA 95112-2702 - Tel: (408) 294-9897 - Fax: (408) 297-1540 http://www.gorillacircuits.com Reference
More informationAustralian National Audit Office REPORT ON RESULTS OF A PERFORMANCE AUDIT OF THE STRATEGIC PLANNING FRAMEWORK. April kpmg
Australian National Audit Office REPORT ON RESULTS OF A PERFORMANCE AUDIT OF THE STRATEGIC PLANNING FRAMEWORK April 2000 kpmg Contents 1. Executive Summary... 1 Introduction...1 Objectives...1 Scope and
More informationQuality Manual. AARD Spring & Stamping Quality Manual
Quality Manual Page 1 of 25 AARD Spring & Stamping QM/5.0 Title: QM 5.0 AARD Spring & Stamping Quality Manual Copy Approval Date: 1/27/2011 Reviewer(s): Sign / Print Title Date Dan Wheeler Document Originator
More informationBROOKHAVEN NATIONAL LABORATORY SBMS Interim Procedure
BROOKHAVEN NATIONAL LABORATORY SBMS Interim Procedure Interim Procedure Number: 2004-18001-005 Revision: 12 on 1-26-07 Title: 18001 Audit Checklist Point of Contact: Pat Williams Management System: Occupational
More information