Learning Objectives. Systems Engineering Management. MSE607B Chapter 4 Engineering Design Methods and Tools
|
|
- Lisa Gaines
- 5 years ago
- Views:
Transcription
1 Engineering Management Systems Engineering Management MSE607B Chapter 4 Engineering Design Methods and Tools Learning Objectives Briefly highlight some of the recent concepts in design Conventional design practices Analytical methods The role of Electric Commerce (EC) Information Technology (IT) The Internet Current Design Technologies and Tools Simulation Rapid Prototyping Mock-ups Computer Aided Design (CAD) Computer-Aided Manufacturing (CAM) Computer-Aided Support (CAS) Discuss system engineering Objectives as they relate to current design methods 2 1
2 Conventional Design Practices System development projects include three major steps: Conceptual design Preliminary design Detail design and development Level of effort and duration vary Prime objective: Design system to meet consumer need 3 System Engineering Within the Acquisition Process 4 2
3 Basic Design Sequence 5 Basic Design Sequence (cont.) Definition accomplished through documentation Plans and specifications Procedures, drawings, Materials and parts lists Reports and analysis, Computerized databases, and so on. Review and approval Before moving to the next step Documentation ensures that others can Understand what is being conveyed Translate the output into a producible entity 6 3
4 Design Drawings Assembly drawings Specification control drawings Construction drawings Installation drawings Materials and parts lists Parts list Materials list Bulk item list, etc. Analysis reports Trade off study reports Finite element reports Reliability reports Documentation 7 Analytical Methods Probability theory and analysis models Uniform Binomial Poisson Exponential Normal, etc. Economic analysis Break-even Life-cycle cost Optimization methods Queuing theory and analysis Monte Carlo Control concepts and techniques SPC TQM 8 4
5 The Role of Electronic Commerce (EC), Info. Tech. (IT), and The Internet Electronic Commerce Grown to include all aspects of business and market processes enabled by the Internet and WWW technologies Information Technology The infrastructure fostering the integration of all the mechanisms for transmitting information and data Internet A network of networks and a connecting vehicle for all who have access to a computer Revolutionized and enhanced day-to-day operations and methods of doing business 9 The Role of Electronic Commerce (EC), Info. Tech. (IT), and The Internet (cont.) Benefits: Communication processes Data processing Data storage and retrieval In design area: Greater productivity in less time Networks or customers, contractors, and suppliers Quick data distribution, review and feedback In business process: Business-to-business e-commerce Enterprise resource planning (ERP) Purchasing and marketing-related activities 10 5
6 Internet Growth Trends 11 The Internet And Other Electronic Communication Internet Intranet Instant messaging Video conferencing Virtual teaming Document management E-learning E-government E-commerce Business-to-business Business-to-customer Website design 12 6
7 Current Design Technologies and Tools With advancement of computer technology, new tools and techniques have been developed and adapted Mainframe computers Personal computers Software packages Computer models Provided engineers with wide variety of tools to enhance productivity Word processors Graphics packages Spreadsheets Database management packages Analysis routines 13 Advantages of Current Design Technologies and Tools Personal computers (PCs) networks Excellent data communication network Design data exchange Reducing system development time Versatility and variety of software packages/models Many new tools such as simulation, 3-D, and mathematical/statistical models More in-depth analysis Evaluation of design alternatives 14 7
8 Advantages of Current Design Technologies and Tools (cont.) Data handling capabilities: Acquisition, processing, storage and retrieval Easier and in less time than before, allowing to capture design information on drawings Generation and distribution of parts/materials Automatically produce reports and Technical publications 15 Why Simulate? Common with the availability of quality tools that fit seamlessly with design tools Important with faster operational speeds and higher density requirements Makes it possible to make design changes without costly re-spins and difficult lab work-around Design can be fabricated assuring performance Saves both cost and schedule Improves reliability and quality 16 8
9 The Use of Simulation Simulation Definition: The process of designing and utilizing an operational model of a system to conduct experiments for understanding and evaluation of Alternative strategies and/or System design configuration Particularly appropriate in the early stages of the system development Examples: Airplane and its components Aircraft cockpit with crew Automobile with driver Manufacturing facility and equipment 17 Simulation Example Effect of Simultaneous Switching Outputs (SSO) Simulation used to determine effect of a bi-directional data bus with 32 simultaneously switching outputs SSO effect observed on data bit and power supply 18 9
10 The Use of Rapid Prototyping Rapid Prototyping Definition: The use of 3D computer geometry in the production of components using a layer-based build process in condensed time-scales Increasing international competition shortened product lifecycles Demand for faster product development processes to keep up with the competition 19 Prototyping Example Child Utensils 20 10
11 The Use of Mock-ups Mock-up Definition: Three-dimensional scale model of the system or its elements During the preliminary or detail design phase Provide realistic replica of a proposed equipment/facility configuration Can be produced to any desired scale and detail May be constructed from heavy cardboard, wood, metal, or a combination of materials Can be developed relatively inexpensively and in short time 21 The Benefits of Mock-ups Give opportunity to experiment with different layouts, packaging prior to formal design Provide opportunity to accomplish more effective review Detailed task analysis Simulate operator and maintenance task sequence and time data Provide excellent tool to convey final design approach during design review Serve as an excellent marketing tool Can be employed to facilitate training Allow to develop fabrication and assembly procedures and tooling May serve as a tool for verification of a modification kit design at later stage of system life cycle 22 11
12 Example: The Use of Mock-ups for Train Development In May and June 2003, a spectacular show for rail transport systems took place on the Champs Élysées in Paris. Siemens Transportation Systems (TS) presented a model of the "Avanto train cart An innovative light rapid transit system that will connect the two Paris suburbs of Aulnay and Bondy from 2005 onwards. General characteristics : Length : 13.5 m Height : 3.5 m Width : 2.45 m Weight : 8 tons Material : - wire chassis, wood frame, glass and epoxy 23 Computer-Aided Design (CAD) CAD Definition: The application of computerized technology to the design process Graphics capabilities Vector and raster graphics Line and bar charts X-y plotting Scatter diagrams Three-dimensional displays Analytical capabilities Mathematical and statistical programs Data management capabilities Storage and retrieval Processing Drafting & Reporting Usually combined in integrated packages 24 12
13 Example: CAD Models 25 Computer-Aided Manufacturing (CAM) CAM Definition: The application of computerized technology to the manufacturing or production process. Primarily the use of automated methods as they pertain to: Process planning Numerical control (NC) Robotics Production management Will be different for production of multiple quantities versus the construction of a one-of-a-kind Manufacturing tolerances f NC tools and robotics must be consistent with the initial requirements for system design
14 Computer-Aided Support (CAS) CAS Definition: The application of computerized technology to the entire spectrum of logistics and system support activities For years, the consideration of logistics and maintenance support requirements has been relegated to an activity downstream in the system life cycle. Examples to the variety of computer technology applications in the logistics field are: Logistics engineering Supportability analysis (SA) Logistics management information (LMI) Distribution, transportation and warehousing Maintenance and support 27 Major CAD/CAM/CAS Interfaces 28 14
15 Summary Briefly highlight some of the recent concepts in design Conventional design practices Analytical methods The role of Electric Commerce (EC) Information Technology (IT) The Internet Current Design Technologies and Tools Simulation Rapid Prototyping Mock-ups Computer Aided Design (CAD) Computer-Aided Manufacturing (CAM) Computer-Aided Support (CAS) 29 Interactive Workshop The results of design have generally been conveyed through a combination of the following: a) Design drawings, requirements and analysis reports b) Design drawings, materials and parts lists, and analysis reports c) Requirements, materials and parts lists d) Requirements, materials and parts lists, and analysis reports 30 15
16 Interactive Workshop Examples of probability and analysis models are: a) Uniform, binomial, and Poisson b) Break-even and life-cycle cost c) Monte Carlo and Poisson d) SPC and TQM 31 Interactive Workshop System engineers use simulation because it allows them to make: a) Mock-up improvements prior to design b) Mock-up improvements prior to production c) Design changes after production d) Design changes prior to production 32 16
17 Interactive Workshop Process planning and robotics are examples of: a) Computer-aided design (CAD) b) Computer-aided manufacturing (CAM) c) Computer-Aided support (CAS) d) Computer-aided learning (CAL) 33 Interactive Workshop One of the benefits of mock-ups is that they provide excellent tool to: a) Experiment with different packaging during formal design b) Convey final design approach during design review c) Help the engineer complete the design d) Can be employed to facilitate design analysis 34 17
18 Questions? Comments? 35 18
Part VI MANUFACTURING SUPPORT SYSTEMS
Part VI MANUFACTURING SUPPORT SYSTEMS Chapters: 23. Product Design and CAD/CAM in the Production System 24. Process Planning and Concurrent Engineering 25. Production Planning and Control Systems 26. Just-In-Time
More informationDesign of Information Systems 1st Lecture
Design of Information Systems 1st Lecture Evaluation method http://online.ase.ro http://sinf.ase.ro Final grade: 50% seminar grade (minimum 5) 50% course grade 1 st written test (in the 6 th week): 2p
More informationThe Realities of Modern Manufacturing
Ch 1 Introduction Sections: 1. Production Systems 2. Automation in Production Systems 3. Manual Labor in Production Systems 4. Automation Principles and Strategies 5. Organization of the Book The Realities
More informationTHE ROYAL INSTITUTION OF NAVAL ARCHITECTS
THE ROYAL INSTITUTION OF NAVAL ARCHITECTS IMPROVING SUPERYACHTS DEVELOPMENT PROCESSES WITH AN INTEGRATED SOLUTION OF PRODUCT LIFECYCLE MANAGEMENT (PLM) F Mathieu, Dassault Systemes, France SUMMARY Product
More informationChapter 8 Producing Quality Goods and Services
Chapter 8 Producing Quality Goods and Services 1 Explain the nature of production. 2 Outline how the conversion process transforms raw materials, labor, and other resources into finished products or services.
More informationINDUSTRY EXPERTISE IN AUTOMATION AND ELECTRONICS AUTOMATION
INDUSTRY EXPERTISE IN AUTOMATION AND ELECTRONICS AUTOMATION HEITEC is an innovative maker of automation solutions and electronics for a wide range of industries. We offer solutions, products, and services
More informationProducing Quality Goods and Services. What Is Production? The Conversion Process. Production Operations Management (POM) The Value Chain.
Producing Quality Goods and Services Prentice Hall, 2007 Excellence in Business, 3e Chapter 9-1 What Is Production? Leading Planning Production Operations Management (POM) Organizing Controlling Prentice
More informationChapter Eight. Learning Objectives
Chapter Eight Production Management 8 1 Learning Objectives 1. Explain the nature of production. 2. Outline how the conversion process transforms raw materials, labor, and other resources into finished
More informationDoD as a Model-Based Enterprise
DoD as a Model-Based Enterprise By Denise Duncan dsp.dla.mil 17 17 DoD is one of the largest buyers of complex systems and the parts to maintain them; it spends billions annually on weapons systems, spares,
More informationIntroduction to CAD. Painting The Big Picture. What Do Those Letters Mean to You? What is Computer-Aided Design (CAD)?
Introduction to CAD What Do Those Letters Mean to You? Painting The Big Picture What is Computer-Aided Design (CAD)? 2 1 The Design Process What is Computer-Aided Design (CAD)? 3 More Specific Definitions
More informationDigital Twin & Augmented Reality. Usage of digital product models for product development, production and. service
Digital Twin & Augmented Reality Hannover, 26th April 2017 Usage of digital product models for product development, production and service Marco Liesegang, EY Advisory Service IoT / I4.0 Team Lead GSA
More informationTECHNICAL & ENGINEERING TRACK
TECHNICAL & ENGINEERING TRACK TECHNICAL & ENGINEERING TRACK - MACHINIST/TECHNICIAN Machinist/Technician The Machinist/Technician works under close supervision to carry out structured work while adhering
More informationChapter 7. E-Supply Chains, Collaborative Commerce, Intrabusiness EC, and Corporate Portals
Chapter 7 E-Supply Chains, Collaborative Commerce, Intrabusiness EC, and Corporate Portals Learning Objectives 1. Define the e-supply chain and describe its characteristics and components. 2. List supply
More informationENTERPRISE-WIDE SOLUTIONS: PRODUCT DESIGN, ANALYSIS,
ENTERPRISE-WIDE SOLUTIONS: PRODUCT DESIGN, ANALYSIS, AND MANAGEMENT THROUGH ENGINEERING TEAMWORK Collaborative Product Development Enterprise-Wide Solutions: Product Design, Analysis, and Management Through
More informationINFORMATION LOGISTICS TECHNOLOGY
INORMATION LOGISTICS TECHNOLOGY INLT 141 INTRODUCTION TO LOGISTICS 3 semester hours, This course will cover topics related to logistics in a systems approach to managing activities associated with transportation,
More informationA TUTORIAL ON ERGONOMIC AND PROCESS MODELING USING QUEST AND IGRIP. Deidra L. Donald
Proceedings of the 1998 Winter Simulation Conference D.J. Medeiros, E.F. Watson, J.S. Carson and M.S. Manivannan, eds. A TUTORIAL ON ERGONOMIC AND PROCESS MODELING USING QUEST AND IGRIP Deidra L. Donald
More informationEPLAN Pro Panel Virtual control cabinet engineering
EPLAN Pro Panel Virtual control cabinet engineering EPLAN Software & Service We advise companies on the optimisation of their engineering processes, develop software-based engineering solutions for mechatronics
More informationIntroduction to Computer Integrated Manufacturing (CIM) Learning Objectives
Introduction to Computer Integrated Manufacturing (CIM) 1 Learning Objectives Modern manufacturing process and its various components, highlighting the different systems (e.g., CAD, CAE, MRP/ERP, CAM,
More informationAn overview of TEAM strategies for integrating the product realization process
13 An overview of TEAM strategies for integrating the product realization process C.K. Cobb Lockheed Martin Energy Systems P.O. Box 2009, MS-8160 Oak Ridge, TN 37831 USA Phone: (423) 576-1884 Fax: (423)
More informationImprove Quality with PMI
Improve Quality with PMI Siemens PLM Connection 2016 Orlando, FL May 16-19 www.plmworld.org #PLMCONX Challenges Cost of Quality External Failure Costs Internal Failure Costs Assurance Costs Prevention
More informationINDUSTRY 4.0 SMART FACTORY. Training that prepares you for the future. 1 st Edition
Lucas Nülle is proudly and exclusively represented in Australia and New Zealand by Training Systems Australia First in Vocational Training Equipment A Division of Pullman Learning Group 300 Centre Road,
More informationInstrumentation & Controls. Siemens Power Plant Automation -- SPPA-T3000. Technical Highlights. The New Benchmark in Control.
Instrumentation & Controls Siemens Power Plant Automation -- SPPA-T3000 Technical Highlights The New Benchmark in Control Power Generation The new benchmark for Distributed Control Systems Developed to
More informationDEPARTMENT OF INDUSTRIAL ENGINEERING AND ENGINEERING MANAGEMENT. Undergraduate Courses Postgraduate Courses
DEPARTMENT OF INDUSTRIAL ENGINEERING AND ENGINEERING MANAGEMENT Undergraduate Courses Postgraduate Courses Undergraduate Courses: IEEM 001 Academic and Professional Development I [0 credit] A compulsory
More informationInformation Technology for Business
Information Technology for Business Business Essentials 9e Ebert/Griffin chapter thirteen After reading this chapter, you should be able to: 1. Discuss the impacts information technology has had on the
More informationComponent-based 3D Simulation Platform for Production Planning and Process Control
Advances in Simulation for Production and Logistics Applications Markus Rabe (ed.) Stuttgart, Fraunhofer IRB Verlag 2008 Component-based 3D Simulation Platform for Production Planning and Process Control
More informationEnterprise Systems MIT 21043, Technology Management and Applications Lecturer in Charge S. Sabraz Nawaz
Chapter 8 Enterprise Systems MIT 21043, Technology Management and Applications Lecturer in Charge S. Sabraz Nawaz Lecturer in Management & IT 1 Learning Objectives Understand the essentials of enterprise
More informationKey Elements Procedure 3. Production and Engineering
Key Elements Procedure 3 Production and Engineering LIST OF CONTENTS 1. Foreword...... Page 2 2. Technical Documentation and Methodology...... 3 3. Quality Assurance at Product Development... 7 1 Key Elements
More informationRobcad. Tecnomatix. Digital manufacturing environment for robotic workcells verification and off-line programming
Robcad Digital manufacturing environment for robotic workcells verification and off-line programming Benefits Increase manufacturing quality, accuracy and profitability Reduce labor hours and process engineering
More informationSimulation Software. Chapter 3. Based on the slides provided with the textbook. Jiang Li, Ph.D. Department of Computer Science
Simulation Software Chapter 3 Based on the slides provided with the textbook 3.1 Introduction Many features common to most simulation programs Special-purpose simulation packages incorporate these common
More informationME 6018 ADDITIVE MANUFACTURING
ME 6018 ADDITIVE MANUFACTURING 1 SYLLABUS UNIT I Introduction UNIT II CAD & Reverse Engineering UNIT III UNIT IV Liquid Based & Solid Based Additive Manufacturing Systems Powder Based Additive Manufacturing
More informationDELMIA V5.17 extends the IBM Product Lifecycle Management solutions portfolio
IBM Europe Announcement ZP07-0453, dated October 16, 2007 DELMIA V5.17 extends the IBM Product Lifecycle Management solutions portfolio Description...2 Product positioning... 5 Reference information...
More informationsiemens.com/simatic-it SIMATIC IT for Automotive Suppliers Answers for industry.
siemens.com/simatic-it SIMATIC IT for Automotive Suppliers Answers for industry. Automotive suppliers: A continuously changing environment A solution for effective manufacturing of automotive components
More informationSolutions for the automotive industry siemens.com/automotive
In the fast lane with digitalization s for the automotive industry siemens.com/automotive Digitalization changes everything The automotive industry is facing dramatic changes in the years to come, inside
More informationFUNDAMENTAL SAFETY OVERVIEW VOLUME 2: DESIGN AND SAFETY CHAPTER G: INSTRUMENTATION AND CONTROL
PAGE : 1 / 14 SUB CHAPTER G.6 I&C PROCEDURES AND TOOLS 1. STANDARD I&C SYSTEM This section describes the tools used for PAS/SAS (level 1 automation data) and MCP[PICS] (HMI) I&C programming. It includes
More informationElectronic document management offers many advantages
Electronic document management offers many advantages Improves engineering productivity Fast Forward: Database-centric electrical computer-aided engineering (E-CAE) enhances productivity. In using E-CAE
More informationAdvantage Support Plus! Inceptra Utilities Overview August 2016
Inceptra Utilities Overview August 2016 IMPROVE YOUR PLM EXPERIENCE Inceptra Utilities are available EXCLUSIVELY at no additional cost to Advantage Support Plus! customers. Inceptra Utilities are designed
More informationSolutions for the automotive industry siemens.com/automotive
In the fast lane with digitalization s for the automotive industry siemens.com/automotive Digitalization changes everything The automotive industry is facing dramatic changes in the years to come, inside
More informationDigital Manufacturing POV
Digital Manufacturing POV Dr. Subhasish Mitra 12 Feb 2015 Copyright 2014 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. Manufacturing in
More informationEngineering 7936 Design Project
Engineering 7936 Design Project Prototyping 1 Introduction Prototype = an approximation of the product along one or more dimensions of interest. Alpha prototypes: Used to assess whether product works as
More informationDIGITAL TWIN MEETING CUSTOMER EXPECTATIONS
DIGITAL TWIN MEETING CUSTOMER EXPECTATIONS Srivatsan Padmanabhan High Tech Industry Practice DIGITAL TWIN 1 DO YOU REMEMBER APRIL 11, 1970? https://www.space.com/36510-apollo-13-moon-mission-survival-in-photos.html/
More informationQUALITY MANAGEMENT DEFINITIONS AND CONCEPTS QUALITY MANAGEMENT TOOLS QA / QC PROCESS COMPUTERS AND PROJECT QUALITY
QUALITY MANAGEMENT DEFINITIONS AND CONCEPTS QUALITY MANAGEMENT TOOLS QA / QC PROCESS COMPUTERS AND PROJECT QUALITY DEFINITIONS Quality: Conformance to requirements and fitness of use. Quality Management:
More informationMGA Research Corporation
MGA Research Corporation Real Time Simulation Testing Gerald Roesser David Nagle Thomas Hutter MGA Research Corporation 1 MGA Research Corporation PRESENTERS Gerald Roesser BSEE MGA Associate since 2001
More informationComputer Aided Process Planning using STEP Neutral File for Automotive Parts
Computer Aided Process Planning using STEP Neutral File for Automotive Parts Vinod V Rampur 1 Assistant professor, Department of Mechanical Engineering PES Institute of Technology and Management Shivamogga,
More informationTECHNICAL REVIEWS AND AUDITS
Chapter 11 Technical Reviews and Audits CHAPTER 11 TECHNICAL REVIEWS AND AUDITS 11.1 PROGRESS MEASUREMENT The Systems Engineer measures design progress and maturity by assessing its development at key
More informationA Future Vision of Interoperability and PLM
A Future Vision of Interoperability and PLM Mark E. Van Horne Associate Technical Fellow Boeing Commercial Airplanes May 17, 2009 2009 -- 1 Presentation Messages Current interoperability technologies focus
More informationINUDSTRY 4.0 SMART FACTORY
INUDSTRY 4.0 SMART FACTORY How can we categorize Smart Factory with regard to industry 4.0 and other technologies Industry 4.0 Marketing R&D Production Logistics/SCM Data Analytics Real-time product data
More informationDynamic Simulation and Supply Chain Management
Dynamic Simulation and Supply Chain Management White Paper Abstract This paper briefly discusses how dynamic computer simulation can be applied within the field of supply chain management to diagnose problems
More informationCompass Software CAD/CAM COMPLETE SOLUTIONS FOR STAIRCASE MANUFACTURING
Compass Software CAD/CAM COMPLETE SOLUTIONS FOR STAIRCASE MANUFACTURING COMPASS SOFTWARE Compass Software ranks amongst the leading providers of software for timber and staircase construction worldwide.
More informationOptimized NC programming for machinery and heavy equipment. Summary NX CAM software redefines manufacturing productivity with a full range of NC
Siemens PLM Software NX CAM for machinery Optimized NC programming for machinery and heavy equipment Benefits Effectively program any type of machinery part Program faster Reduce air cutting Automate programming
More informationConnected Automation: Showcase Manufacturing i4.0
Bosch Rexroth AG Postfach 13 57 97803 Lohr, Germany Bgm.-Dr.-Nebel-Str. 2 97816 Lohr, Germany Tel. +49 9352 18-0 Fax. +49 9352 18-8400 www.boschrexroth.com/factoryautomation Connected Automation: Showcase
More informationChapter 3 DECISION SUPPORT SYSTEMS CONCEPTS, METHODOLOGIES, AND TECHNOLOGIES: AN OVERVIEW
Chapter 3 DECISION SUPPORT SYSTEMS CONCEPTS, METHODOLOGIES, AND TECHNOLOGIES: AN OVERVIEW Learning Objectives Understand possible decision support system (DSS) configurations Understand the key differences
More informationELCAD 7 - Engineering to the highest power
ELCAD 7 - Engineering to the highest power Smarter, High End Engineering System ELCAD 7 is the ultimate professional CAE system. It covers every aspect of the work process, helping you deliver electrical
More informationDelivering Innovation in Digital Manufacturing through XVL
D i g i t a l M a n u f a c t u r i n g S o l u t i o n s W H I T E P A P E R US Headquarters 582 Market Street, San Francisco, CA. 94104 USA Tel: 415 274 1670 Fax: 415 274 1671 Worldwide headquarters
More informationGlobal E-Business: How Businesses Use Information Systems
Chapter 2 Global E-Business: How Businesses Use Information Systems 2.1 2010 by Prentice Hall LEARNING OBJECTIVES Define and describe business processes and their relationship to information systems. Evaluate
More informationInformation Technology has completely changed many different aspects of our lives. Thanks to IT, what was difficult, expensive or downright
1 Information Technology has completely changed many different aspects of our lives. Thanks to IT, what was difficult, expensive or downright impossible some years ago, is now simple. One of the activities
More informationCHAPTER 1 INTRODUCTION
1 CHAPTER 1 INTRODUCTION 1.1 MANUFACTURING SYSTEM Manufacturing, a branch of industry, is the application of tools and processes for the transformation of raw materials into finished products. The manufacturing
More informationTransforming Digital Tooling Data into Program-Ready Data
White Paper Transforming Digital Tooling Data into Program-Ready Data Connecting your CAM system directly to digital tool data is a smart step towards making your programming environment faster and more
More informationDigital Twin Digital Thread in Aerospace David Riemer
Digital Twin Digital Thread in Aerospace David Riemer Unrestricted Siemens AG 20XX Realize innovation. Siemens Focus is to Enable Excellent Performance on Every Program Program Execution Excellence Fully
More informationUnderstanding Manufacturing Execution Systems (MES)
Understanding Manufacturing Execution Systems (MES) What is a Manufacturing Execution System (MES)? AMR Research, a Boston-based industry and market analysis firm, defines a Manufacturing Executing System
More informationComputer-Integrated Manufacturing
Supplement F Supplement F Computer-Integrated Manufacturing Computer-Integrated Manufacturing TRUE/FALSE 1. Computer-integrated manufacturing (CIM) is an umbrella term for the total integration of product
More informationPTC Technology Roadmap
PTC Technology Roadmap Paul Haimes, PTC VP, Pre-Sales (Western Europe) Agenda Product News Windchill 10.0 Creo 2.0 Integrity Solution News Solutions for the Enterprise Solutions for Engineering Solutions
More informationWhy Information Systems? The Information Systems Revolution. Emergence of Global Economy. Emergence of Global Economy
Why Information Systems? The Information Systems Revolution Four power worldwide changes have altered the environment of business Emergence of Global Economy Transformation of Industrial Economies Transformation
More informationTechnology_ KUKA.Sim EN
Technology_ EN The simulation and offline programming software for KUKA systems and robots Optimize the use of your systems and robots and achieve a greater level of flexibility and productivity by means
More informationMathcad : Optimize your design and engineering process.
Mathcad : Optimize your design and engineering process. Where engineering excellence begins. ENGINEERING CALCULATION SOFTWARE Solve, document, share and reuse vital engineering calculations. Engineering
More informationManagement Information Systems. B02. Information Technologies: Concepts and Management
Management Information Systems Management Information Systems B02. Information Technologies: Concepts and Management Code: 166137-01+02 Course: Management Information Systems Period: Spring 2013 Professor:
More informationManagement Information Systems - Enterprise Systems
Management Information Systems - Enterprise Systems Cross Functional Systems What is EDI? Why ERP? What is ERP? Evolution of ERP Benefits of ERP SAP Overview What is CRM? Learning Objectives Refer (Unit
More informationCOMPUI'ER-AIDED DESIGN WHAT IS REALLY WORTHWHILE?
3 January 1972 Earl M Vraa COMPUI'ER-AIDED DESIGN WHAT IS REALLY WORTHWHILE? Computer-Aided Design, Automated Design, Design Automation are terms which are freely interchanged by people in the computer
More informationTech 149: Unit 2 CAD/CAM
Tech 149: Unit 2 CAD/CAM Chapter 23: Product Design and CAD/CAM in the Production System Sections: 1. Product Design and CAD 2. CAM, CAD/CAM, and CIM 3. Quality Function Deployment The Design Process The
More informationPRODUCTION PLANNING ANDCONTROL AND COMPUTER AIDED PRODUCTION PLANNING Production is a process whereby raw material is converted into semi-finished products and thereby adds to the value of utility of products,
More informationModels in Engineering Glossary
Models in Engineering Glossary Anchoring bias is the tendency to use an initial piece of information to make subsequent judgments. Once an anchor is set, there is a bias toward interpreting other information
More informationSPEED PRODUCT DEVELOPMENT WITH INTEGRATED DIGITAL MOCK-UP SOLUTIONS
University Research Park 10330 David Taylor Drive Charlotte, NC 28262 www.3ds.com Phone: 704-264-8800 Fax: 704-264-8888 SPEED PRODUCT DEVELOPMENT WITH INTEGRATED DIGITAL MOCK-UP SOLUTIONS Dassault Systèmes
More informationconveyours and dividers
conveyours and dividers EN SMILINE DIVISION Fluid transport of the products The transport of containers and products from a machine to another one within a bottling line is a crucial factor in order to
More informationCAD/CAM CHAPTER ONE INTRODUCTION. Dr. Ibrahim Naimi
CAD/CAM CHAPTER ONE INTRODUCTION Dr. Ibrahim Naimi Production System Facilities The facilities in the production system are the factory, production machines and tooling, material handling equipment,
More informationThe Bend The Combi The Laser The Punch The System The Software. Tulus Power Processing
The Bend The Combi The Laser The Punch The System The Software Tulus Power Processing What is Tulus Power Processing? Tulus Power Processing is a manufacturing execution system (MES). With Tulus Power
More informationUNIT II PRODUCTION PLANNING AND CONTROL AND COMPUTERISED PROCESS PLANNING
UNIT II PRODUCTION PLANNING AND CONTROL AND COMPUTERISED PROCESS PLANNING 2 Process Planning Product design for each product has been developed in the design department. To convert the product design into
More informationLectures 2 & 3. Software Processes. Software Engineering, COMP201 Slide 1
Lectures 2 & 3 Software Processes Software Engineering, COMP201 Slide 1 What is a Process? When we provide a service or create a product we always follow a sequence of steps to accomplish a set of tasks
More informationBasics of Product Data Management in Automotive Engineering
Basics of Product Data Management in Automotive Engineering Name of institute Mario Hirz Institute of Automotive Engineering G r a z U n i v e r s i t y o f T e c h n o l o g y M. Hirz 2009 What is PDM?
More informationD i g i t a l R e s o u r c e s, I n c.
D i g i t a l R e s o u r c e s, I n c. For those interested in our Hollow Metal Configuration and Engineering Automation System: In response to the many inquiries we have received requesting more detailed
More information5.3 Supply Management within the MES
Technical 6x9 / Manufacturing Execution Sytems (MES): Design, Planning, and Deployment / Meyer / 0-07-162383-3 / Chapter 5 Core Function Production Flow-Oriented Planning 85 Customer data (e.g., customer
More informationINFORMATION TECHNOLOGY
STUDY MATERIAL Intermediate (IPC) Course PAPER : 7A INFORMATION TECHNOLOGY [Revised Syllabus - Relevant from November, 2014 Examination onwards] VOLUME I BOARD OF STUDIES THE INSTUTE OF CHARTERED ACCOUNTANTS
More informationThe Business Case for MBE. DMC December 2014
The Business Case for MBE DMC December 2014 Agenda Background Individual studies High level Business Case Q & A 2 Background OSD s Defense-Wide Manufacturing Science and Technology program funded three
More information7/8/2017 CAD/CAM. Dr. Ibrahim Al-Naimi. Chapter one. Introduction
CAD/CAM Dr. Ibrahim Al-Naimi Chapter one Introduction 1 2 3 Production System Facilities The facilities in the production system are the factory, production machines and tooling, material handling equipment,
More informationPress Presse Prensa. Logistics and Assembly Systems. For the Trade Press Nuremberg/Offenbach, Germany June 9, 2005 Siemens L&A Talks Europe 2005
Press Presse Prensa Logistics and Assembly Systems For the Trade Press Nuremberg/Offenbach, June 9, 2005 Siemens L&A Talks Europe 2005 Siemens L&A tears down the walls with LMES: LES and MES with standard
More informationUNITED STATES DISTRICT COURT DISTRICT OF MINNESOTA. v. REPORT AND RECOMMENDATION
UNITED STATES DISTRICT COURT DISTRICT OF MINNESOTA PROTO LABS, INC., CIVIL NO. 15-2562 (SRN/JSM) Plaintiff, v. REPORT AND RECOMMENDATION ICO PRODUCTS, LLC, Defendant. JANIE S. MAYERON, United States Magistrate
More informationSIMA Reference Architecture Part 1: Activity Models
NISTIR 5939 SIMA Reference Architecture Part 1: Activity Models Editor: Edward J. Barkmeyer Contributors: Neil Christopher Shaw C. Feng James E. Fowler Simon P. Frechette Albert Jones Kevin Jurrens Kevin
More informationThe Aras PLM Platform
2 THE ARAS PLM PLATFORM Table of Contents ENABLING THE BUSINESS OF ENGINEERING... 3 THE PRODUCT INNOVATION PLATFORM... 4 THE ARAS PLM PLATFORM... 5 DOING BUSINESS WITH ARAS... 6 TECHNOLOGY... 7 Architecture...7
More informationVirtual Commissioning in the Digital Enterprise Presented by: Thomas Hoffman Manufacturing in America March 14-15, 2018
Virtual Commissioning in the Digital Enterprise Presented by: Thomas Hoffman Manufacturing in America March 14-15, 2018 Before we start A Penny for Your Thoughts At the end of the session, share your feedback
More information9 Maintainability. Management and Costing 9.1 INTRODUCTION 9.2 MAINTAINABILITY MANAGEMENT TASKS DURING THE PRODUCT LIFE CYCLE
9 Maintainability Management and Costing 9.1 INTRODUCTION Just like in any other area of engineering, management plays an important role in the practice of maintainability engineering. Its tasks range
More informationChapter. Redesigning The Organization With Information Systems
Chapter Redesigning The Organization With Information Systems 1 Objectives Demonstrate how building new systems produces organizational change Explain how a company can develop information systems that
More informationPDM vs. PLM: It All Starts with PDM
white paper PDM vs. PLM: It All Starts with PDM productivity SUMMARY Product data management (PDM) or product lifecycle management (PLM) which system best fits the needs of your manufacturing organization?
More informationMathcad : Optimize your design and engineering process.
Mathcad : Optimize your design and engineering process. Where engineering excellence begins. ENGINEERING CALCULATION SOFTWARE Solve, document, share and reuse vital engineering calculations. Engineering
More informationEnhance and automate your forms and business documents creation, maintenance and distribution. Go Beyond Printing:::
Transactional and variable content document printing, output management and automated delivery. FOR LOGISTICS AND SUPPLY CHAIN MANAGEMENT Enhance and automate your forms and business documents creation,
More informationCapgemini s PoV on Industry 4.0 and its business implications for Siemens
Capgemini s PoV on Industry 4.0 and its business implications for Siemens Siemens Digital Transformation Executive Forum June 5 th 2014, Udo Lange TRANSFORM TOGETHER Contents INDUSTRY 4.0: Drivers for
More informationContents Introduction to Logistics... 6
CONTENTS Contents... 3 1. Introduction to Logistics... 6 1.1 Interfaces between Logistics Manufacturing....7 1.2 Logistics: Manufacturing issues in Customer Service...9 I.3 Production scheduling...10 1.4
More informationPROCESS AUTOMATION FOR DISTRIBUTION OPERATIONS MANAGEMENT. Stipe Fustar. KEMA Consulting, USA. Components
PROCESS AUTOMATION FOR DISTRIBUTION OPERATIONS MANAGEMENT Stipe Fustar KEMA Consulting, USA INTRODUCTION To prosper in a competitive market, distribution utilities are forced to better integrate their
More informationIndustrial machinery and heavy equipment. Haidlmair
Industrial machinery and heavy equipment Injection molding tool maker saves time, enhances quality and eliminates errors Products NX, Teamcenter, PLM Components Business challenges Design and manufacture
More informationMeasurement, simulation, virtualization
Translated article Methoden und Tools für die Entwicklung von Fahrzeugsystemen: Messung, Simulation, Virtualisierung, Elektronik Automotive Sonderausgabe Software 2016 Methods and tools for the development
More informationStatistical Process Control automation in the final inspection process: an industrial case study
Statistical Process Control automation in the final inspection process: an industrial case study L. Guerra 1, S. D. Sousa 1, E. P. Nunes 1 1 ALGORITMI Research Centre, University of Minho, Guimarães, Portugal
More information9, FRANCE USA JAPAN CATIA
CATIA for Yacht Dedicated zone for your graphic band images. The challenges The yachting industry is caught in a fierce crosswind: while the Small Boat market is facing increasingly stiff competition on
More informationproalpha ERP CAD Integration ERP for SMEs
proalpha ERP CAD Integration ERP for SMEs proalpha CA-Link creates a consistent data and information flow between engineering and proalpha ERP. The highlights of proalpha CA-Link: Your CAD software and
More information