COPYRIGHT 2015 Hangzhou Hikvision Digital Technology Co., Ltd.

Transcription

1 [POS Solution]

2 BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. REGARDING TO THE SOLUTION WITH INTERNET ACCESS, THE PRACTICE OF SOLUTION SHALL BE WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITES FOR COPYRIGHT 2015 Hangzhou Hikvision Digital Technology Co., Ltd. ALL RIGHTS RESERVED. Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be Hikvision ). This Manual ( the Manual ) cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of Hikvision. Unless otherwise stipulated, Hikvision does not make any warranties, guarantees or representations, express or implied, regarding to the Manual. About this Manual The Manual introduces POS solution, which is designed based upon a hypothetical environment defined in the content; therefore, THE INFORMATION CONTAINED IN THE MANUAL IS SUBJECT TO CHANGE DUE TO DIFFERENT ENVIRONMENTS. Pictures, charts, images and all other information hereinafter are for description and explanation only. Please use this Manual under the guidance of Hikvision representatives. Revision Record New release 16 th, _March Trademarks Acknowledgement and other Hikvision s trademarks and logos are the properties of Hikvision in various jurisdictions. Other trademarks and logos mentioned below are the properties of their respective owners. Legal Disclaimer TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE SOLUTION DESCRIBED, WITH ITS HARDWARE, SOFTWARE, SYSTEMS OR OTHERS, IS PROVIDED AS IS, WITH ALL FAULTS AND ERRORS, AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN

3 CONNECTION WITH THE PRACTICE OF THIS SOLUTION, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. REGARDING TO THE SOLUTION WITH INTERNET ACCESS, THE PRACTICE OF SOLUTION SHALL BE WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION BEFORE PRACTICING THIS SOLUTION IN ORDER TO ENSURE THAT YOUR PRACTICE CONFORMS TO THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS SOLUTION IS USED WITH ILLEGITIMATE PURPOSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.

4 Table of Contents 1. Preface Solution System Structure POS +DVR mode ivms 4200+POSDVR+POS mode ivms 5200+POSDVR+POS mode... 19

5 Document Control No. Revised Content Time Revised by Reviewed by 1 V /2/22 Challen Ethan, Ada 2 V /3/15 Challen Ethan, Ada 3 V /3/16 Challen Ethan, Ada

6 1. Preface POS solution has been mainly applied in retail industry. This document was written for Hikvision Partners, Customers as well as internal sales and pre-sales. It includes Hikvision s consideration on a complete POS solution. In different practical scenarios suitable different combinations are possible to realize the most suitable solution for the end customer. Let s have look at some basic concepts in this domain. What is POS? POS (point of sale) refers to the time and place where a retail transaction is completed. It is the point at which a customer makes a payment to the salesperson/cashier in exchange for goods or service. Most of time the salesperson/cashier provides a receipt for the customer at POS. The Constitution of POS system Different and customized hardware and software are mostly deployed in various situations in the retail industry. This is cause by particular requirement from the industry or the retailers themselves. Retailers may utilize printer, scanners, electronic cash registers, POS terminals, touch screens and a variety of other available utilities. Q: Where is POS solution overall deployed. Besides retail industry, POS solution is also widely deployed in catering industry, Medial industry (e.g. hospital), warehouse etc. Only take a glance of POS terminal market, in 2012, in total 28 billion USD was spent on POS terminal market. It s foreseen that in 2020 this market volume will double size. Fig.1 Global POS terminals market by product,

7 What is POS text overlay? The information of transaction including the key information of the transactions such time and device source can be overlaid on the previewed image and be recorded into the video records as shown in Fig.2. Fig.2 POS text overlay Why do we need POS text overlay? POS text overlay function make it possible to integrate video surveillance system into the central management system. This ease the management dramatically. The video which is recorded with overlaid text provides more details of each transaction and footage searching becomes so easy based on this information for the end user. This technology is extreme important for solving disputed problems between clients and preventing inside jobs.

8 2. Solution 2.1 System Structure Fig.3 System structure of the POS application POS +DVR mode Introduction Currently there are two ways to DVR with POS terminals, via network or via serial port. For example: The DVR initiates the connection to the POS server for the POS data communications between POS server camera. Fig.4 Basic network connection with camera

9 How to realize the connection is mainly based on the type of POS machine. It s very important that what type of POS machine is adopted. The following is POS TVI sever DVR with model introduction TVI DVR Configuration We need to configure the DVR firstly. 1. Login the DVR on the local DVR page, select system configuration -> POS : Fig.5 POS configuration page 2. Select a POS channel, if your POS camera is added by an analog camera in the DVR, please choose the Ax channel, if your POS camera is added by a digital camera, you need to choose the Dx channel. The TVI DVR can both support the analog channel and IP channel.

10 Fig.6 Overlay channel configuration page 3. Select a connection type, if the connection type is RS-232, you also need to configure the RS-232 parameters; then, select the overlay mode, Font size, overlay time(s), font color in this page and so on. Fig.7 POS settings 4. After setting, the POS overlay you set will display to the live view local page.

11 Fig.8 POS overlay live view 5. Record configuration: Enable the POS schedule in the disk. And click edit to check the day is POS record. Fig.9 POS local record configuration1

12 Fig.10 POS local record configuration2 6. Playback the POS channel in the local DVR playback page. The POS record bar is red as an event record. Please refer to the below picture: Main POS parameter introduction; Fig.11 POS Playback POS Protocol: At present, there are three kinds of compatible protocols: Universal Protocol, EPSON, AVE. POS Settings: Overlay Channel: If M means analog cameras, N means digital cameras, so there will

13 show most half of M+N POS cameras. Select the correct channel, you can overlay the information on it.. Connection ways: Network connection (TCP, UDP, multicast, Sniff) Serial Port connection (RS-232) USB connection (USB to 232) Main POS Configuration tips: POS only overlay to the main stream. All the streams are stored in the disk, there has a control switch when in playback, we can control show the overlay or not. The overlay is not in the stream Network POS+ DVR For example: We based on TCP connection type, DVR will initialize the connection between camera and POS terminal for POS data transmission. The topology as shown in Fig.12Fig.12. Fig.12 Network POS with DVR topology RS-232 POS (Serial Port) + DVR To RS-232 POS, there are three connection ways. 1) POS machine connect to the DVR, the topology usually like this below:

14 Fig.13 RS-323 POS with DVR topology1 2) Also, we usually will see the IO server in this mode. The POS machine connect to the IO server, the IO server turn 232 signals into network signals, the topology usually like this below: Fig.14 RS-323 POS with DVR topology2 3) Use RS-232 to USB convertor, there is an extra RS-232 hardware with the USB to connect to the DVR, the port in convertor and POS are one to one correspondence, POS1 should be connected to port1 of convertor. The topology like this below:

15 Fig.15 RS-323 POS with DVR topology Product selection Table 1 Product List Product Product Model Description Image DS-73/81**HQ HI-F/N 1. Support POS rule configuration 2. Support POS local live view, record local playback DVR 3. Support POS event playback, backup 4. 2/4/8 POS text overlay channels ivms 4200+POSDVR+POS mode Introduce With high compatibility and wide adaption, the ivms-4200 can manage analog, IP and hybrid signal devices; it can access to the devices of different network environment namely LAN, WAN, cable or wireless connection. For example, we add the POS to the DVR, then we use the following topology:

16 Fig.16 ivms 4200+POSDVR+POS mode topology Configuration 1. Firstly, we need to keep TVI DVR with cameras online; then, we can add the device in the 4200, do the configuration in the 4200 configuration page. Fig.17 ivms 4200 maintenance management page 2. Select the POS DVR, click to open the device remote configuration page, click the POS tab to set the parameters.

17 3. Live view the test overlay. Fig.18 Remote configuration page Fig.19 Live view the test overlay 4. Record configuration: configure the event record in the storage schedule page. And you

18 can search the record by key word, such as: enter the keywords to filter in a period of time in Fig.21. Fig.20 Storage schedule configuration Fig.21 Key word search playback

19 Product selection Table 2 Product List Product Product Model Description ivms-4200 V build Support to configure an IPC with one POS machines 2.Suppot POS live view and playback 3.Support one-channel video search POS ivms 5200+POSDVR+POS mode Introduction The ivms-5200 Pro is a centralized management monitor system which is developed by Hikvision based on SOA architecture. It features flexibility, scalability high reliability and powerful functions. Integrating with multiple surveillance systems, ivms-5200 Pro provides the central management, information sharing, convenient connection and multi-business integration. For example, we add the network POS to the DVR, then we use the following topology: Fig.22 ivms 5200+POSDVR+POS mode topology Configuration 1. Add the device in the 5200.

20 Fig.23 POS NVR added to the ivms Select the POS DVR, click to open the device remote configuration page, click the POS tab to set the parameters. 3. Live view the test overlay. Fig.24 POS NVR remote configuration page

21 Fig.25 Live view the test overlay 4. Record configuration: configure the event record in the storage schedule page. Fig.26 Storage schedule configuration 5. Open the playback page, search the normal record of the POS channel, then switch to the POS playback. You can do the key word search playback, such as: enter the keywords to filter in a period of time in Fig.28. Fig.27 POS playback entrance

22 Fig.28 Key word search playback Product selection Table 3 Product List Product Product Model Description ivms-5200 ivms-5200_p_v _IPM _ Support configure an IPC with two POS 2.Suppot POS live view and playback 3. Support multi-channel video search POS

23