Floor coatings EPOXY RAPID WB Recoatable in 3 hours COLDMAX RAPIDTM Apply up to -10 C. TARMACOAT TM Rain-proof in 1 hour

Transcription

1 NE W TIME saving Floor coatings 5800 EPOXY RAPID WB Recoatable in 3 hours Page COLDMAX RAPIDTM Apply up to -10 C Page 3 TARMACOAT TM Rain-proof in 1 hour Page 4 EPOXY REPAIR MORTAR Faster & stronger than concrete Page 2

2 5180 epoxy repair mortar Very strong epoxy repair mortar for repairing damaged floors This easy to use epoxy repair mortar is ideal for repairing eroded or damaged concrete, bay edges and broken steps. Repairs made with 5180 are virtually indestructible and its wear resistance and adhesion are unrivalled. It has excellent temperature, chemical and solvent resistance. Suitable for forklift traffic Stands up to heavy traffic and chemicals Quickly back into service Does not shrink or crack Easy all-in-1 packaging Stronger than concrete! Use indoors or outdoors Also suitable for repairing damaged concrete stairs Epoxy-based m² / 10kg at 5mm deep 30 minutes Curing time: 6-12 hrs for light traffic / hrs for heavy traffic Mid Grey 2.5kg, 5kg, 25kg Substrates: Concrete, Masonry All Rust-Oleum or Mathys epoxy floor coatings and 5401, 5421 and 3366 Contact us for free advise, your nearest dealer and technical datasheets: /

3 9700 Coldmax Rapid RAPID CURING POLYASPARTIC FLOOR COATING Our strongest coating ever, based on the latest polyaspartic technology. This makes the coating ideal when extra protection against traffic and chemicals is needed. This versatile coating can also be used outdoors and in cold rooms and freezers Coating for balconies and walkways! Apply as low as -10 ºC UV-resistant Certified for direct food contact Overcoatable in 4 hours at 20 ºC Use indoors or outdoors Excellent flow Solvent-free 10 m²/l at 100μm dry 45 minutes Recoating time: 4 hrs 9768 Tile Red 9781 Light Grey 9789 Dark Grey 9792 White Light Grey, Dark Grey, White & Tile Red 2.5 L Substrates: Concrete, substrates primed with 5401, 5421, 3333 or Coldmax Rapid Approved for dry food contact Use in cold rooms or freezers! 3

4 MULTI-PURPOSE FLOOR PAINT EA USE WATER QUE BA SI ERBASSIERT ASS W ER BASED E WAT NP AS S H E XT E RIOR ur! o h e on n i f o pro n i a sed R a b r Wate ant t s i s e er r h t a e W TARMACOAT Is rain-proof and recoatable after just one hour Can be applied on slightly damp surfaces Has an excellent resistance to U.V. and weathering Is a water-based formulation, safe to use and virtually no odour 6126 Mid Blue Water-based 4 Watch the video on: 4-8 m²/l at 80μm dry Recoating time: 1 hour See colour card 5L Substrates: Asphalt, Concrete, Sport Fields or Pavement RUST-O-THANE 9200 or Tarmacoat Contact us for free advise, your nearest dealer and technical datasheets: / Mid Green Light Grey Signal Yellow Tile Red Mid Grey White

5 5800 RAPID EPOXY RAPID WB CURING EPOXY FLOOR COATING WATER BASED EN PHASE AQUEUSE WATERBASIS WASSERBASSIERT 5800 Day 1 Day 2 Surface Prep 1 st coat 2 nd coat SAVE 1 DAY! Traditional epoxy Surface Prep 1 st coat 2 nd coat rapid curing Some coating projects allow only a small period of time for 5840 Light Ivory RAL Tile Red 5880 Light Grey RAL 7035 water-based good wear resistance no odour easy to clean excellent flow application. For example, in car garages, workshops and factories, production loss is expensive Epoxy Rapid WB provides the ideal solution for these floors: an overcoat period of just 3 hours makes it possible to apply 2 coats in one day. With a traditional epoxy system these projects would not be possible Mid Grey RAL Dark Grey RAL White RAL 9010 long potlife APPLY 2 COATS IN 1 DAY! Water-based 6 m²/l at 80μm dry 4 hrs Recoating time: 3 hrs See colour card, choose MATT or GLOSS 5 L Substrates: Concrete, substrates primed with 5401, 5421, 3333 or 3366 RUST-O-THANE

6 3366 EPOXY POWERFLOAT FLOOR PRIMER RAPID Primer for use on smooth floors Primer for use on smooth floors, like power-floated concrete and tiles. Can be over coated after just 3 hours, so apply primer and first coat in just one day. Primer has a light grey colour to improve opacity of the next layers. Solvent-free Base & Activator in one package Recoating time: Substrates: 10 m²/l at 100 μm dry 2 hrs 3 hrs Light Grey 5 L Concrete, Masonry, even non-porous, smooth surfaces like power-floated concrete All Rust-Oleum or Mathys epoxy floor coatings and 9700 Coldmax Rapid 5421 EPOXY FLOOR PRIMER RAPID RAPID CURING IMPREGNATION PRIMER Base & Activator in one package Rapid curing adhesion primer for floors. For use on porous or brittle floors to impregnate and improve adhesion. This primer cures in 4 hours, so it s possible to apply two layers in one day. Solvent-free Recoating time: Substrates: 10 m²/l at 100 μm dry 30 minutes 4 hrs Transparent 5 L Concrete, Masonry All Rust-Oleum or Mathys epoxy floor coatings and 9700 Coldmax Rapid improves adhesion 100% solids binds brittle surfaces low odour rapid curing high layer thickness 6 Contact us for free advise, your nearest dealer and technical datasheets: /

7 Extensive floor knowledge in one day! Prove your expertise and pass the exam Topics Floor Analysis Surface Preparation Cleaning and Repair Floor system specification Application session 7

8 Worldwide more than 10 million m² are protected by our floor coatings. RUST-OLEUM is the expert on floor coatings. Call us for free advice. Subscribe now for Rust-Oleum Newsletter: Your distributor: Follow us on Visit our channel on Youtube: Like us on Facebook: Rust-Oleum Netherlands B.V. P.O. Box AC Roosendaal The Netherlands T: 31 (0) F: 31 (0) Rust-Oleum UK Ltd. PO Box 261, Chester Le Street, DH3 9EH United Kingdom T: +44 (0) F: +44 (0) Rust-Oleum France S.A.S. 11, rue Jules Verne - B.P St-Leu-La-Forêt Cedex France T: +33 (0) F: +33 (0) info@rust-oleum.eu N.V. Martin Mathys S.A. Kolenbergstraat Zelem Belgium T: +32 (0) F: +32 (0) info@rust-oleum.eu V503.GB