SMARTCARE DAMP PROOF TECHNICAL PARAMETERS

Transcription

1 SMARTCARE DAMP PROOF Asian Paints SmartCare Damp Proof is a fiber reinforced elastomeric liquid applied water proofing membrane. It is formulated with select elastomeric and resilient acrylic polymers and reinforcing polyester fibers. Upon curing, it forms a thick, seamless, durable membrane thus offering ultimate waterproofing. Waterproofing: Protection of up to7 bars hydrostatic pressure Form: Ready to use viscous liquid Crack bridging: Unmatched crack bridging ability due to elastomeric properties Mix density: 1.26 Application temperature: 5oC to 35oC Mechanical strength: Reinforced with glass fibers for superior abrasion resistance Adhesion: Strong adhesion to masonry substrates High sheen: Brilliant white colour and thick coat results in high levels of heat reflectance Anti carbonation: Reduces carbon dioxide and chloride ion diffusion thus protecting re-bars against corrosion Use & maintenance: Single pack, easy to apply and simple re-coating PCC M20 Screed to Slope Loosely laid Geotextile Film Second coat of Damp Proof First coat of Damp Proof + Joint and Corner Tapes for L shaped joints and corners Damp Proof Self Priming Coat TYPICAL VALUE Appearance Color Specific Gravity Water Resistance Alkali Resistance Viscosity Sormer Solids by Wt,% Tensile Strength Elongation Adhesion to Dry Concrete CBA, mm Water Vapour Permeance Anti Carbonation, R Value (@ 207 DFT) Viscous liquid White KU mm (Horizontal) STANDARD DESCRIPTION TESTING LAB DIN 1048 ASTM C 1549 Positive Hydrostatic pressure Solar Reflectance ConTech TUV

2 SMARTCARE DAMP SHEATH Asian Paints SmartCare Damp Sheath Exterior is a waterproofing coating for exterior horizontal surfaces like terraces, chajjas and also a waterproofing basecoat for Asian Paints Exterior Emulsion coatings for vertical walls. Water proofing: Best-in-class waterproofing of up to 3 bars of positive waterproofing pressure on vertical surfaces and 5 bars of positive waterproofing pressure on horizontal surfaces Form: Ready to use viscous liquid Mix density: 1.26 Application temperature: 5oC to 35oC Adhesion: Superior adhesion on all masonry and cementitious surfaces Flexibility: Best-in-class flexibility with 150% elongation on horizontal surfaces Crack Bridging: Superior crack bridging ability (CBA) of up to 0.5mm on horizontal surfaces Warranty: 3 Years waterproofing warranty Application: Single product for both vertical and horizontal application Use: Easy to apply Damp Sheath Damp Sheath Self-priming Coat / Vertical Wall STANDARD DESCRIPTION TESTING LAB ASNZ 4548 Crack Bridging Ability Veritas RILEM RILEM Water Absorption Veritas DIN 1048 Hydrostatic pressure +ve side ConTech BS EN 1062 Part 6 Carbon Dioxide Diffusion (R Value) Taywood (Vinci Construction Lab, UK) ASTM C Solar Réflectance TUV SUD (PSB Singapore)

3 SMARTCARE EPDM MEMBRANE SmartCare EPDM Membrane is a preformed elastomeric waterproofing membrane made up of high quality EPDM rubber. This membrane exhibits high tensile strength, elongation, tear strength and is also resistant to weathering, heat ageing, ozone, UV rays, acids, alkalis & oxygenated solvents. SmartCare EPDM Membranes demonstrates much higher elongation after ageing as compared to other types of membranes and hence provides long service life. Long service life High tensile and tear strength Resistant to ozone, weathering, heat ageing, ultra-violet, acids, alkalis & oxygenated solvents High Elongation - More than 400 % Zero maintenance cost provided, it is fixed as per the recommendation Additional dead load Negligible Colour: Black Colour textile finish rubber sheets Dimensions: 1.2 x 20 m Rolls, Tolerance +/- 10% Approval/standards: ASTM D 4637 & ASTM D 6134 Shelf life: The shelf life is 24 months under specified storage conditions PCC M20 Screed (To Slope) Loosely laid Geotextile Film SmartCare EPDM Membrane SmartCare Rubber Adhesive TESTING METHOD STANDARD VALUES TYPICAL VALUES Chemical Base EPDM Thickness mm ASTM ± 10% Unit Weight kg/m Tensile Strength, MPa ASTM D 412 Min 9.0 Min 10 MPa Elongation at Break (L/T)% ASTM D 412 Min Min 400 Tear Strength (lbs/ inches) ASTM D 624 Min Min 35 Adhesion Strength, (N/mm) ASTM D 903 Min 9 Hydrostatic Water Pressure, Bars DIN 1048 No Leakage Passes 7 Shore 'A' Hardness ASTM D 2240 Min 60 Elastic Recovery ASTM D 412 Min 90 STANDARD TESTING LAB NTH ASTM D

4 SMARTCARE APP MODIFIED BITUMINOUS MEMBRANE WITH MINERAL TOP (3MM, 4MM) Asian Paints SmartCare Waterproofing Membrane is a five-layered system with APP modified polyester fleece reinforced bituminous membrane for superior waterproofing. This membrane exhibits excellent tensile strength, tear strength, puncture resistance and dimensional stability. The torch side of the membrane is covered with polyethylene film for protection of the membrane. Excellent flexibility Cost effective and durable in comparison to conventional low end waterproofing systems APP modified bituminous, polyester fleece reinforced, mineral finish ASTM Standard: ASTM D Excellent water tightness if applied as per recommended system and application Good temperature resistance to cold and warm temperatures High tensile strength, tear and puncture resistance PCC M20 Screed (To Slope) Loosely laid Geotextile Film SmartCare APP Membrane (3mm - 4mm, by torching) EPDM Membrane SmartCare Bitumen Primer TYPICAL VALUES Sample Description 3mm MT 4mm MT Top Face Mineral Finish Mineral Finish Thickness, mm 3 4 Unit Weight, Kg/m2 Min 3.5 Min 4.8 Tensile Strength (N/5cm), Longitudinal Tensile Strength (N/5cm), Transverse % Elongation at Break, Longitudinal % Elongation at Break, Transverse Tear Strength, Longitudinal Tear Strength, Transverse Low Temp Flexibility, 0OC No Cracking No Cracking Softening Point (OC) > 150 > 150 Compound Stability at 110OC No Flow No Flow Dimensional Stability No change No change Resistant to Water Pressure No Leakage No Leakage % Water Absorption Max 3 Max 3 Lap Joint Strength, Longitudinal Lap Joint Strength, Transverse

5 SMARTCARE PU MAGNUM PU Magnum is one-component polyurethane, waterproofing liquid membrane, offering: Mechanical, chemical, thermal, UV and weather resistance properties, as it is based on pure, elastomeric, hydrophobic, polyurethane resins. A uniform, elastic, waterproof, vaporpermeable sealing layer, without forming seams or joints Applicability even on irregular substrates An affordable and reliable solution for waterproofing Availability in white It is certified with the CE marking as a coating for surface protection of concrete, according to EN SmartCare PU Magnum SmartCare Epoxy Primer TYPICAL VALUES Form Pre-polymer polyurethane Colors White, black Density 1.44 kg/l Viscosity 5,500 ± 500 mpa sec (at +230C) Elongation at Break (ASTM D 412) 750 ± 50% Tensile Strength (ASTM D412) 4.0 N/mm2 Hardness According to SHORE A 80 ± 2 Water Impermeability 5 atm (DIN 1048) Solar Reflectance (SR) (ASTM E903-96) 84% Infrared Emittance (ASTM C a) 0, 9 Solar Reflectance Index (SRI) (ASTM E1980-0) 106 Capillary Aabsorption (EN , requirement of EN : w < 0.1) 0.01 kg/m2 h0.5 Permeability to Co2 (EN ) Sd > 50 m Water Vapor Permeability (permeable, EN ISO , Class I < 5m) Sd = 0.82 m Adhesion (EN 1542,requirement for exible systems without traf cking:0.8 N/mm2) > 2.0 N/mm2 Artificial Weathering (EN ,after 2000h) Pass (no blistering, cracking or, flaking) Reaction to Fire (EN ) (EN ) Temperature Resistance from -300C to +900C

6 SMARTCARE EPOXY TRIBLOCK Asian Paints Epoxy Tri Block is an epoxy cementitious coating for positive side waterproofing of cementitious water retaining structures. Good adhesion over smooth as well as cementitious surfaces Positive side waterproofing Food grade certification, lit for storing portable water Microbial resistant coating 2 year warranty for cementitious water retaining structure Epoxy Tri Block PCC Screed M20 Prof Damp Block 2K Layer Tank Slab RESULTS Nature Three componant Mixing Ratio, by weight (Base:Hardner:Filler:Water) 17:18:65:20 Consistency Free flowing smooth paste Pot Life at 30 o C, Minutes 60 minutes Surface Drying time at 30 o C, Minutes 22 minutes Inter-coat Periods at 30 o C, Hours 4-5 hours Positive Hydrostatic Pressure DIN 1048 No water penetration found up till 4 bars Adhesion Strength a sper ASTM D 4541: 02in (N/mm 2 ) 3 Mpa Food Grade Certification Certified safe by CFTRI Mysore (Govt. Lab) to store potable water STANDARD DESCRIPTION TESTING LAB USFDA 175:300 Global Migration CFTRI