1 Product Name: Handrail and/or guardrail architectural hardware bearing the name SYNERGi INVISION Pre-Engineered Railing System

Transcription

1 INVISION Product Data Sheet 1 Product Name: Handrail and/or guardrail architectural hardware bearing the name SYNERGi INVISION Pre-Engineered Railing System 2 Manufacturer: Accent Architectrual exclusively manufactures the system as detailed on these data sheets and can be contacted at: US Canada Internet 6599 Washington Blvd. Elkridge, Maryland USA Fax: info.us@accentarchitectural.com Clark Graham Ave. Baie d'urfe, Quebec H9X 3R8 Canada info@accentarchitectural.com Basic Use: SYNERGi INVISION components comprise a pre-engineered railing system which is normally installed by experienced Accent Architectural field personnel. Components can also be shipped to the job site ready to install Standard components are for interior installations but can be manufactured in material suitable for exterior applications 4 Limitations: SYNERGi INVISION components are limited by the materials from which they are fabricated Component warrantees are therefore limited to installation procedures and applications approved by Accent Architectural for each respective project. Final positioning of SYNERGi components must always be based upon field dimensions 5 Technical Data: The SYNERGi INVISION Railing System is designed to meet performance criteria as outlined in I.B.C Stability: To ensure the full structural potential of the INVISION Pre-Engineered Railing System, the attachment of components to supports and/or adjacent surfaces must be approved or selected by the manufacturer and shall be detailed on all shop drawiings SYNERGi Pre-Engineered Railing System by Accent Architectural Page 1 of 2

2 7 Design: Layouts for the pre-engineered railing should be based upon selected SYNERGi components as listed in the catalogue ie: -1 3/4" Ø Round adjustable glazing brackets up to 5'-10" o.c /4" x 2 1/4" Rectangular adjustable glazing brackets up to 5'-10" o.c. -Round handrail bracket -Rectangular handrail brackets Any deviation or adjustment to components from standard should be approved by Accent Architectural who can also provide design assistance to meet specific conditions 8 Finishes: Standard No. 4 Polish, Long Dimension, is standard but other finishes are available upon request. 9 Infill Panels: ½" Clear tempered glass furnished by Accent Architectural is the standard. Other types can be accommodated such as mesh, perforrated panels, grille and resin but should be confirmed with Accent Architectural for compatability 10 Installation: Accent Architectural offers the services of experienced installation technicians and strongly recommends they be used wherever possible. Quality control of field installations can only be guaranteed when performed by these qualified personnel 11 Availability and Cost: These factors are effected by the size of the project, material selected and current scheduling. Enquiries should be directed to Accent Architectural, Sales Dept., who can provide requested appropriate information. 12 Maintenance: The surface of SYNERGi components can be kept clean with use of mild soaps and cleaners. Abrasive type cleaners should not be used SYNERGi Pre-Engineered Railing System by Accent Architectural Page 2 of 2

3

4 Invision Panel support with a smooth glass surface and a clear material statement 12 For those projects where clean, unobstructed lines are required, the Invision flush point support glazing connector is the ultimate choice. CUSTOM FiT To meet your specific needs, Accent Architectural continues to provide outstanding service and quality in custom stairs, glass treads, glass feature walls, glass ceilings, stainless steel and glass elevator jambs, and more.

5 SYNERGi PRE-ENGINEERED RAILING SYSTEM Invision Design details > Edge mounting can be easily adapted to most structural conditions encountered around openings and at stair stringers. Simplicity Invision incorporates special concealed features to provide optimum flexibility during the install process and as a result can guarantee the quality that your project deserves. Dependent upon panel size, generally only four connectors per panel are required for support - two groups of fasteners, each group comprised of two connectors spaced 6" apart vertically. It s that simple! INVISION CIRCLE OR SQUARE EDGE MOUNT