Notor recessed LED Opal dropped

Transcription

1 Page 1 of 12 Installation Luminaire for mounted in ventilated or unventilated suspended ceilings. Installed in suspended ceilings with visible T-bars, VTB (15 or 24 mm) or one-piece suspended ceilings. Accessories available for installation in a concealed T-bar structure (HB) with symmetrically positioned panels. DALI/Phase-pulse control W Module Weight, kg Colour CCT (K) lm lm/w Useful life Art.No. LED (system) Straight luminaire, Low Lumen (LL), start Anodised L 90 B h Connection Connection by means of a connection box on top of the luminaire. Wieland Chassis connector 3-way (GST 18i3), with dimming 5-way (GST 18i5). In a luminaire row should always start with a start luminaire. With luminaire units are interconnected with a connection cable in the connection box. Design Luminaire body in natural anodised, extruded aluminium or white enamelled (RAL 9016). With continuous installation an unbroken line of light is achieved, even via a L- coupling. Louvre Opal plate in frosted acrylic (PMMA). The louvre hangs down 10 mm from the ceiling and provides ambient luminance to ceiling and wall. LED-information 3000 K/4000 K: Ra (CRI) min. 80, MacAdam 3 SDCM. Driver life-time: up to h/10 % (max failure). Miscellaneous Accessories and cables, see Accessories.Enclosure class IP 40 under suspended ceilings and IP 20 above suspended ceilings.to calculate how many luminaires and accessories you will need to complete a run, please use our configurator. NOTE! Do not mix Low Lumens (LL)- and High Lumen (HL)-luminaires in continuous installations.

2 Page 2 of mm 600 mm

3 Page 3 of 12 Installation Luminaire for mounted in ventilated or unventilated suspended ceilings. Installed in suspended ceilings with visible T-bars, VTB (15 or 24 mm) or one-piece suspended ceilings. Accessories available for installation in a concealed T-bar structure (HB) with symmetrically positioned panels. DALI/Phase-pulse control W Module Weight, kg Colour CCT (K) lm lm/w Useful life Art.No. LED (system) Straight luminaire, Low Lumen (LL), start Anodised L 90 B h Connection Connection by means of a connection box on top of the luminaire. Wieland Chassis connector 3-way (GST 18i3), with dimming 5-way (GST 18i5). In a luminaire row should always start with a start luminaire. With luminaire units are interconnected with a connection cable in the connection box. Design Luminaire body in natural anodised, extruded aluminium or white enamelled (RAL 9016). With continuous installation an unbroken line of light is achieved, even via a L- coupling. Louvre Opal plate in frosted acrylic (PMMA). The louvre hangs down 10 mm from the ceiling and provides ambient luminance to ceiling and wall. LED-information 3000 K/4000 K: Ra (CRI) min. 80, MacAdam 3 SDCM. Driver life-time: up to h/10 % (max failure). Miscellaneous Accessories and cables, see Accessories.Enclosure class IP 40 under suspended ceilings and IP 20 above suspended ceilings.to calculate how many luminaires and accessories you will need to complete a run, please use our configurator. NOTE! Do not mix Low Lumens (LL)- and High Lumen (HL)-luminaires in continuous installations.

4 Page 4 of mm 600 mm

5 Page 5 of 12 Installation Luminaire for mounted in ventilated or unventilated suspended ceilings. Installed in suspended ceilings with visible T-bars, VTB (15 or 24 mm) or one-piece suspended ceilings. Accessories available for installation in a concealed T-bar structure (HB) with symmetrically positioned panels. DALI/Phase-pulse control W Module Weight, kg Colour CCT (K) lm lm/w Useful life Art.No. LED (system) Straight luminaire, Low Lumen (LL), start Anodised L 90 B h Connection Connection by means of a connection box on top of the luminaire. Wieland Chassis connector 3-way (GST 18i3), with dimming 5-way (GST 18i5). In a luminaire row should always start with a start luminaire. With luminaire units are interconnected with a connection cable in the connection box. Design Luminaire body in natural anodised, extruded aluminium or white enamelled (RAL 9016). With continuous installation an unbroken line of light is achieved, even via a L- coupling. Louvre Opal plate in frosted acrylic (PMMA). The louvre hangs down 10 mm from the ceiling and provides ambient luminance to ceiling and wall. LED-information 3000 K/4000 K: Ra (CRI) min. 80, MacAdam 3 SDCM. Driver life-time: up to h/10 % (max failure). Miscellaneous Accessories and cables, see Accessories.Enclosure class IP 40 under suspended ceilings and IP 20 above suspended ceilings.to calculate how many luminaires and accessories you will need to complete a run, please use our configurator. NOTE! Do not mix Low Lumens (LL)- and High Lumen (HL)-luminaires in continuous installations.

6 Page 6 of mm 600 mm

7 Page 7 of 12 Installation Luminaire for mounted in ventilated or unventilated suspended ceilings. Installed in suspended ceilings with visible T-bars, VTB (15 or 24 mm) or one-piece suspended ceilings. Accessories available for installation in a concealed T-bar structure (HB) with symmetrically positioned panels. DALI/Phase-pulse control W Module Weight, kg Colour CCT (K) lm lm/w Useful life Art.No. LED (system) Straight luminaire, Low Lumen (LL), Single/Cont./End Anodised L 90 B h Connection Connection by means of a connection box on top of the luminaire. Wieland Chassis connector 3-way (GST 18i3), with dimming 5-way (GST 18i5). In a luminaire row should always start with a start luminaire. With luminaire units are interconnected with a connection cable in the connection box. Design Luminaire body in natural anodised, extruded aluminium or white enamelled (RAL 9016). With continuous installation an unbroken line of light is achieved, even via a L- coupling. Louvre Opal plate in frosted acrylic (PMMA). The louvre hangs down 10 mm from the ceiling and provides ambient luminance to ceiling and wall. LED-information 3000 K/4000 K: Ra (CRI) min. 80, MacAdam 3 SDCM. Driver life-time: up to h/10 % (max failure). Miscellaneous Accessories and cables, see Accessories.Enclosure class IP 40 under suspended ceilings and IP 20 above suspended ceilings.to calculate how many luminaires and accessories you will need to complete a run, please use our configurator. NOTE! Do not mix Low Lumens (LL)- and High Lumen (HL)-luminaires in continuous installations.

8 Page 8 of mm 600 mm

9 Page 9 of 12 Installation Luminaire for mounted in ventilated or unventilated suspended ceilings. Installed in suspended ceilings with visible T-bars, VTB (15 or 24 mm) or one-piece suspended ceilings. Accessories available for installation in a concealed T-bar structure (HB) with symmetrically positioned panels. DALI/Phase-pulse control W Module Weight, kg Colour CCT (K) lm lm/w Useful life Art.No. LED (system) Straight luminaire, Low Lumen (LL), Single/Cont./End Anodised L 90 B h Connection Connection by means of a connection box on top of the luminaire. Wieland Chassis connector 3-way (GST 18i3), with dimming 5-way (GST 18i5). In a luminaire row should always start with a start luminaire. With luminaire units are interconnected with a connection cable in the connection box. Design Luminaire body in natural anodised, extruded aluminium or white enamelled (RAL 9016). With continuous installation an unbroken line of light is achieved, even via a L- coupling. Louvre Opal plate in frosted acrylic (PMMA). The louvre hangs down 10 mm from the ceiling and provides ambient luminance to ceiling and wall. LED-information 3000 K/4000 K: Ra (CRI) min. 80, MacAdam 3 SDCM. Driver life-time: up to h/10 % (max failure). Miscellaneous Accessories and cables, see Accessories.Enclosure class IP 40 under suspended ceilings and IP 20 above suspended ceilings.to calculate how many luminaires and accessories you will need to complete a run, please use our configurator. NOTE! Do not mix Low Lumens (LL)- and High Lumen (HL)-luminaires in continuous installations.

10 Page 10 of mm 600 mm

11 Page 11 of 12 Installation Luminaire for mounted in ventilated or unventilated suspended ceilings. Installed in suspended ceilings with visible T-bars, VTB (15 or 24 mm) or one-piece suspended ceilings. Accessories available for installation in a concealed T-bar structure (HB) with symmetrically positioned panels. DALI/Phase-pulse control W Module Weight, kg Colour CCT (K) lm lm/w Useful life Art.No. LED (system) Straight luminaire, Low Lumen (LL), Single/Cont./End Anodised L 90 B h Connection Connection by means of a connection box on top of the luminaire. Wieland Chassis connector 3-way (GST 18i3), with dimming 5-way (GST 18i5). In a luminaire row should always start with a start luminaire. With luminaire units are interconnected with a connection cable in the connection box. Design Luminaire body in natural anodised, extruded aluminium or white enamelled (RAL 9016). With continuous installation an unbroken line of light is achieved, even via a L- coupling. Louvre Opal plate in frosted acrylic (PMMA). The louvre hangs down 10 mm from the ceiling and provides ambient luminance to ceiling and wall. LED-information 3000 K/4000 K: Ra (CRI) min. 80, MacAdam 3 SDCM. Driver life-time: up to h/10 % (max failure). Miscellaneous Accessories and cables, see Accessories.Enclosure class IP 40 under suspended ceilings and IP 20 above suspended ceilings.to calculate how many luminaires and accessories you will need to complete a run, please use our configurator. NOTE! Do not mix Low Lumens (LL)- and High Lumen (HL)-luminaires in continuous installations.

12 Page 12 of mm 600 mm

13 Fagerhult develops, manufactures and markets professional lighting systems for public environments indoor and outdoor such as offices, schools, retail and hospitals. Our operations are run with a constant focus on design, function, flexibility and energy saving solutions. HEAD OFFICE SWEDEN Fagerhults Belysning AB SE Habo, Sweden Tel See for sales offices. Fagerhult is part of the Fagerhult Group, one of Europe s leading lighting groups. AB Fagerhult is listed on the NASDAQ OMX Nordic Exchange in Stockholm.