CLADDING SYSTEM CLADDING PANELS.

Size: px
Start display at page:

Download "CLADDING SYSTEM CLADDING PANELS."

Transcription

1 CLADDING SYSTEM CLADDING PANELS

2

3 High performances and great possibilities to be creative with an eco-friendly cladding which is in accordance with energy saving laws. The cladding panels CLADIA, with Ductal inside, have been used principally in the ventilated curtain wall systems, improving their characteristics and performances that is: - The appearance and architecture thanks to big dimensions and the wide range of colors and superficial finishings. Energy saving, thanks to the possibility to insert insulating material into the air chamber formed between the panel and the bearing wall, maximizing the effect of ventilated panels. Acoustic insulation due to panel mass, typical of concrete material. High impact resistance due to the use of three-dimensional reinforced web made of glass fiber, especially for the ground floor areas. Durability over time, typical of concrete material. Low needs of maintenances over time. Non-polluting raw materials, environmentally friendly production. In its factory Zanette uses green energy self-generated with the use pf photovoltaic systems and cogeneration plants (vegetable oils). Closed loop with depuration of water to avoid any waste of water resources.

4

5 Cladding for new building and renewing of existing building. CLADIA, with Ductal inside, can be used in many different ways, from standard or customized cladding for new buildings, right to cladding for buildings to restore or renovate for which have been required compatibility with the landscape and respect of any planning restrictions. Performances and technical characteristics of CLADIA, with Ductal inside, permit to obtain special customized products, carefully manufactured as all italian tailoring products. Community buildings, shopping centers, hotel, institutional forum, old buildings can be upgraded using a high performances cladding which ensures energy saving and a short pay- back time of investment. 3D modeling, life size prototype, resistance test. Our technical office is arranged to plan the most appropriate productive solutions also in case of customized cladding for curtain wall.

6

7 CLADIA, with Ductal inside, for eco-friendly buildings. Certified protections for a safe property investment. CLADIA, with Ductal inside, ensures advantageous performances and living comfort: outside with ventilated curtain wall system, and inside providing amazing creative and functional opportunities. Sound absorbing, insulating, fire and weatherproof resistance, easy to clean and with an unvarying long life. A modular and practical cladding, an excellent weight/performances ratio, an ideal solution also for the modern prefabricated building.

8 1200 x 3600 mm Thickness 15 mm Through the use of numerically controlled work center with 5 axis, the panels can be cut, drilled and milled post-production, creating pleasant scenic effects and further expanding the cladding finishings possibilities x 2400 mm 1200 x 1200 mm Technical characteristics: The external finishing of CLADIA, with Ductal inside panels, can be provided with an innovative technology thanks to which, on the external surface, can be reproduced any kind of digital imagine to further customize the curtain wall of the buildings. Dimensions: 3 standard sizes dimensional tolerances Thickness Standard thickness Tolerances thickness Straight tolerances Perpendicularity tolerances Cross curvature tolerances Vertical curvature tolerances 1200 x 1200 mm 1200 x 2400 mm 1200 x 3600 mm ± 2 mm 15 mm ± 1 mm ± 0,05 % ± 2 mm / m 1/200 of the width 1/200 of the length Lower dimensions are possible, obtained from cutting standard-side panel (excluded scraps). On demand no-standard. Physical properties Weight Flexural resistance Elastic modulus Fire resistance Keil point fixing and de-moulding 15 mm = 35 kg/m 2 >14 MPa (according to EN ) E cm >44 GPa A1 (according to EN ) >2,50 KN Test and certifications according to ATEX type A issued by CSTB (France). Finishes Natural Brushed Bush hammered Orange peel appearance Texture On demand Natural effect of material Processing of the surface with evidence of micro granules Traditional mechanical processing Rounded and bush hammered processing Standard matrix and photographic material On customer specification

9 Fastening systems. Surface finishes. The different superficial processings don t change the characteristics and performances of panels, thanks to the low-porosity of Ductal paste. It means many architectural possibilities. It can be also used texture with special matrix, available on customer request. Stone effect matrix. Wood effect matrix. Screws fastening. It is an exposed fastening system which allows to screw the panels to the vertical mullions. Rivets fastening. It is a fastening system with special rivets which allows a really fast mounting and a long durability over time. The fastening with mobile and fixed points permits the thermal expansions of all used materials. å Invisible fastening. Using hidden clips, fastened at the rear of the panels and at special dowels, there are no-exposed elements. Surface treatments. To improve protection over time, CLADIA, with Ductal inside, can be treated on the surface with impregnating products against dirt, graffiti resistant coating for public areas, water repellents at matt gloss wet look and colorants to smooth the visible surface. ç å Example of 3D panel matrix type Rekli Oriental 14 ç Example of 3D panel matrix type Rekli Oriental 13

10 Colors and finishings Further to the existing range of 14 standard colors, it is possible to have special colors at customer s request always using the same coloring process.the different colors can have 5 finishes: NATURAL the texture of Ductal has been enhanced. BRUSHED the tiny grains of silicon have been highlighted. ORANGE PEEL APPEARANCE a mix between brushed and bush hammered processing. BUSH HAMMERED rustic and raw effect of the material. UNIFORM finishing, a protective pigmented coat is applied, with more or less covering capacity, giving to the surface a matt or glossy effect. On CLADIA, with Ductal inside, can be applied also water-repellent materials, anti-graffiti coating and wet effect, all tested and certified at our inside laboratories. 10

11 TOTAL BLACK ANTHRACITE DARK GREY GREY WHITE TOTAL WHITE IVORY SAND YELLOW RED LIGHT RED EARTH BROWN GREEN BLUE Finishing Uniform Finishing Natural Finishing Brushed Finishing Orange peel finish Finishing Bush-hammered 11

12 CLADIA, with Ductal inside, on ventilated curtain wall. Support wall Metal substructure Insulating material The cladding of a building, today, is really important for the design but also for the energy saving which is obtained using innovative technology like the ventilated curtain wall system. This system is made up different components: insulation, substructure and panels. The cladding panel CLADIA, with Ductal inside, thanks to its great dimensions and low weight, allows a lower cost of substructure and a higher level of energy performances without compromising the aesthetic care and the durability over the time. CLADIA, with Ductal inside, has fire resistance A1 in accordance with EN no-fiammable and so it is suitable for any application. CLADIA panels, with Ductal inside 12

13 Corner elements CLADIA, with Ductal inside, eco-friendly building. There are many solutions to realize corner linking, as reported below: The CLADIA panels with Ductal inside, have been compared with the aluminum and HPL panels (that are the systems most commonly used). The results show advantageous really interesting for our product. CLADIA HPL ALUMINUM Type - A Type - B Gas emissions greenhouse effect. CLADIA panels with Ductal inside, are one of the best solution on the market among the cladding systems, to realize an eco-friendly building, both during manufacturing process than the replacement and final disposal. CLADIA HPL ALUMINUM Type - C Type - D Water consumption. The water consumption to produce CLADIA panels with Ductal inside, is limited at the hydration of concrete and not at the processing cycles. So the water consumption is 3 times less than aluminum solutions and 6 times less HPL solutions. CLADIA HPL ALUMINUM Waste production. The CLADIA, with Ductal inside, production, generates waste considered completely inert. Their pollution value is comparable to the lighter aluminum. Instead the HPL production appears the most polluting both during manufacturing process than the final disposal. 13

14 CLADIA,with Ductal inside, the curtain wall cladding made in Italy. ZANETTE SRL Via Brigata Osoppo, 190 I Vigonovo di Fontanafredda (PN) Tel Fax

15 CLADIA, with Ductal inside, were born from collaboration between Zanette, Italian manufacturer of concrete prefabricated panels and Lafarge-Holcim, world leader in building material systems. The CLADIA, with Ductal inside, inside, have been realized with UHPC Ductal concrete which allows to produce flat elements of large dimensions, very thin thickness, durability over time, a wide range of colors and superficial finishings. CLADIA, with Ductal inside, have been produced in the Italian manufacturing plants Zanette, located in Fontanafredda (Pn), using sophisticated concrete batching units, high technology equipment, continuously monitored from the internal laboratory and the main European certification Institute (CSTB and Giordano Institute). 15

16 Our aim is to give customer not what he wanted but what he had never dreamt. (Denys Ladsun) CLADDING PRECAST BUILDING WINDOWS INTERIOR BATHROOM FURNITURE BUILDING ENERGY+ 16