Town of Gordonsville, Virginia Board of Architectural Review Agenda Item Summary March 4, 2015

Transcription

1 Town of Gordonsville, Virginia Board of Architectural Review Agenda Item Summary March 4, 2015 AGENDA ITEM 6a New Business AGENDA TITLE: Consideration of COA for 308 N. High Street DISPOSITION: [X] Action Required [ ] For Discussion [ ] Informational ATTACHMENTS: [ X ] yes [ ] no BACKGROUND: Attached is a Certificate of Appropriateness application and supporting information for the roof replacement on property located at 308 N. High Street. The property owners propose replacing the existing shingle roof with a metal seam roof of a style as shown on the attached. Pursuant to Section of the Town of Gordonsville Land Development Ordinance, the following features and factors shall be considered in determining the appropriateness of proposed construction, reconstruction, alteration or restoration of buildings or structures within the HOD: (a) (b) (c) (d) (e) (f) The distinguishing original qualities or character of a building, structure, or site and its environment shall not be destroyed. The removal or alteration of any historical material or distinctive architectural features should be avoided when possible; Distinctive stylistic features or examples of skilled craftsmanship which characterize a building, structure, or site shall be treated with sensitivity; Whether the material, height, scale, mass and placement of the proposed addition, modification or construction are visually and architecturally compatible with the site and the district; The effect of the proposed change on the historic district neighborhood; The impact of the proposed change on other protected features on the property, such as gardens, landscaping, fences, walls and walks; and Whether the proposed method of construction, renovation or restoration could have an adverse impact on the structure or site, or adjacent buildings or structures. Additionally, the Historic Overlay District Guidelines offer the following regarding roofs: 1. ROOFS AND ROOFING MATERIALS p:\planning & zoning\bar\agenda packages\2015\march 4, 2015\miksovic (308 n high street)\summary_new_business_a_308_nhigh_street_coa.doc

2 a. Existing roofs should be retained in their original shape and pitch, with original features such as cresting, chimneys, finials and cupolas, and, if possible with original roof materials such as metal shingles or standing seam metal roofing. b. Two storey buildings may be re-roofed above the ceiling line of the second floor with substitute materials such as asphalt or fiberglass shingles if the original materials are no longer present or if the retention and repair of the original roof material is not economically feasible. c. Roofs of new shingles should approximate the original materials as closely as possible and be in appropriate colors such as dark gray, black, brown or shades of dark red. Red or green may also be appropriate for Craftsman-Bungalow period buildings. New wood shingles (including new shake shingles) are appropriate for most early 19th century buildings. Standing seam metal roofs are appropriate for later 19th century buildings. d. New dormers, roof decks, balconies or other additions should not be introduced on the front of buildings. However, additions of this type may be added to the roof on the rear or sides if they will not be prominently in the public view. e. Flat roofs should have soldered metal panels added as the surface material. However, rolled composition or EPDM (rolled rubber) roofing materials are acceptable if not in public view. MOTIONS FOR CONSIDERATION: Motion to approve: Motion to approve the application for a certificate of appropriateness for the roof replacement on property located at 308 N. High Street in that the proposal is compatible with the architectural character of the existing dwelling and meets the standards set forth in Section of the Town of Gordonsville Land Development ordinance. Motion to deny: Motion to deny the application for a certificate of appropriateness for the roof replacement on property located at 308 N. High Street in that the proposal is incompatible with the architectural character of the existing dwelling and does not meet the standards set forth in Section of the Town of Gordonsville Land Development ordinance. p:\planning & zoning\bar\agenda packages\2015\march 4, 2015\miksovic (308 n high street)\summary_new_business_a_308_nhigh_street_coa.doc

3

4

5

6 SERIES 1300/1301 PANEL SYSTEM ARCHITECTURAL SYSTEM FOR COMMERCIAL AND RESIDENTIAL 1" AND 1-1/2" ARCHITECTURAL MECHANICALLY SEAMED PANEL SYSTEM The Englert Series 1300/1301 systems are designed for sloped roofs and other exterior surfaces of light commercial or residential projects. Both profiles use concealed clips and fasteners and both must be mechanically seamed to qualify for Englert s weather tightness warranty. SYSTEM APPLICATIONS Light duty for residential and commercial use ½"/12" minimum slope Must be installed over a solid deck (For all applications 3"/12" slope and under, manufacturer recommends the use of MetalMan HT Underlayment) SUBSTRATES 26 and 24 gauge steel.032" aluminum 16 oz. copper.7 and.8 mm zinc (Reinzink) ENGLERT

7 SERIES 1300/1301 PANEL SYSTEM FINISHES Englert s Series 1300/1301 system is available in a wide variety of coatings and colors. See the Englert color card for our full range of standard colors and paint system specifications. Englert can match the color of virtually any material including brick, wood and fabric with short lead times as needed. Custom colors are available in quantities as low as 5,000 lbs. on steel or aluminum. SYSTEM WARRANTIES Galvalume Plus 25 year steel warranty on acrylic coated Galvalume Perma-color year steel or aluminum warranty on ULTRA-Cool /low-gloss Kynar 500 coatings Perma-Metallic year steel or aluminum warranty on Kynar 500 coating Siliconized Modified Polyester 15-year steel or aluminum coating warranty Series /2" Mechanically Seamed Series " Mechanically Seamed 180 Seam 90 Seam RATINGS AND CERTIFICATIONS (1300 Only) UL-90 rating over 5/8" plywood, 20" wide with clips at 18" o.c. (24 ga. steel) Metro-Dade County wind driven, rain tested at 70 mph ASTM-E-84 Class A fire rating on coating and substrate 12" 20" (variable) Panel (Ribs & Striations Optional) 1½" Distributed by: Kynar 500 is a registered trademark of Atochem. N.A. Galvalume and Galvalume Plus are registered trademarks of BIEC International, Inc. ULTRA-Cool is a trademark of BASF. Copyright 2011 Englert Inc. All rights reserved D ENGLERT

8 Standard COLORS and COATINGS PERMACOLOR 3500 Full Strength 70% Kynar 500 /Hylar 5000 All colors available in Galvalume and Aluminum (.032",.040" &.050"). SUNNET BLUE HARTFORD GREEN R 28.1 E.9 SRI 29.7 DARK BRONZE R 29.1 E.9 SRI 31 MANSARD BROWN R 31 E.9 SRI 33.4 BURGUNDY R 35.4 E.9 SRI 39.2 ROYAL BLUE R 28 E.9 SRI 29.6 PERMAMETALLICS 3500* FOREST GREEN R 28.7 E.89 SRI 30 MATTE BLACK R 28.2 E.9 SRI 29.8 MEDIUM BRONZE R 32.3 E.91 SRI 35.6 COLONIAL RED R 36.8 E.9 SRI 41 METALLIC COPPER R 43.8 E.9 SRI 50.2 CHAMPAGNE R 38.4 E.91 SRI 43.5 PREWEATHERED GALVALUME R 45.7 E.91 SRI 53.1 PACIFIC BLUE R 28.5 E.9 SRI 30.1 EVERGLADE MOSS R 32 E.9 SRI 34.7 CHARCOAL GRAY R 30.1 E.9 SRI 32.3 SIERRA TAN R 35 E.91 SRI 39.1 MILL FINISH *Premium priced paint systems. GALVALUME-PLUS R 68 E.10 SRI 54.5 DEEP RED R 42 E.91 SRI 48.2 SLATE BLUE R 31 E.91 SRI 33.9 PATINA GREEN R 39 E.91 SRI 44.3 SLATE GRAY R 40.3 E.9 SRI 45.6 SANDSTONE R 51 E.9 SRI 59.8 TERRA COTTA R 34.8 E.89 SRI 37.9 BONE WHITE R 67 E.9 SRI 81.4 HEMLOCK GREEN R 28 E.92 SRI 30.4 To view current SRI values, please visit the Englert website. DOVE GRAY R 28 E.9 SRI 29.6 STONE WHITE R 62.5 E.9 SRI 75.3 to the limitations of printing processes, slight variations may exist. Please contact Englert for actual color chips before ordering.

9 FINISHES THAT MEET ANY DESIGN OBJECTIVE Englert is one of the few single-source metal roof manufacturers with an in-house calls for a natural weathered appearance or bright, high-performance, full-strength Custom Colors We can match the color of virtually any material, including brick, wood and fabric. Englert offers short lead times, and our minimum custom-color order requirements are among the industry s lowest. ROOFING KYNAR-COATED STANDARDS IN STOCK - SHEET AND COIL COLORS STEEL ALUMINUM 22g 24g 26g COLORS STEEL ALUMINUM 22g 24g 26g Galvalume Plus NA NA NA NA Matte Black Burgundy Bone White Patina Green Charcoal Gray Royal Blue Colonial Red Slate Blue Dark Bronze Slate Gray Dove Gray SunNet Blue Deep Red Sandstone Everglade Moss Sierra Tan Forest Green Stone White Hartford Green Terracotta Hemlock Green Champagne (Metallic)* Mansard Brown Copper (Metallic)* Medium Bronze Preweathered (Metallic)* Mill Finish (Aluminum) NA NA NA Made to order available in sheets only. POLYESTER COATED SHEETS* - ALUMINUM 4' x 10' 4' x 8' COLORS (TWO-SIDED) *Mica 2-Coat System - Standard - Minimum Quantities Required NA = Not Available slight variations may exist. Please contact Englert for actual color chips before ordering. DISTRIBUTED BY: Bronze Low-Gloss White Hi-Gloss White Hi-Gloss White *Contact Englert for information on additional polyester colors. ENGLERT INC Amboy Avenue, Perth Amboy, NJ Phone: Fax: info@englertinc.com englertinc.com 90300B