External drainage. Roof, yard and car park drains. Drainage by design!

Transcription

1 External drainage Roof, yard and car park drains Drainage by design!

2 2 Dallmer GmbH + Co. KG Roof drains for gravity drainage... 8 Overflow drainage for gravity drainage... 9 Gravity roof drains with fire collars in concrete decks

3 SuperDrain siphonic drainage Siphonic drains with overflow drainage Siphonic drains with fire protection in profiled steel decks Yard and car park drains Dallmer GmbH + Co. KG 3

4 Because simple is best The range of products described in this catalogue can be summed up quite simply: everything you need for drainage of roofs and traffic areas. And for flat roofs: whether gravity drainage, siphonic drainage, overflow drainage, renovation drains or fire protection, we have the right solution for every situation, the right flange for every membrane. Rainwater from downpipes is led into our rainwater hoppers, while our yard and car park drains ensure long-lasting and complete drainage of paved traffic areas. Whatever you need: with Dallmer you can find what you are looking for quickly and easily! 4 Dallmer GmbH + Co. KG

5 Roof drains for gravity and overflow drainage 6-9 Renovation roof drains SuperDrain siphonic roof drainage / Overflow drainage Balcony and terrace drainage Rainwater hoppers Fire protection for roof drains in concrete decks and profiled steel decks: Industrial Building Guideline Gravity drainage with fire collars in concrete decks Gravity drainage with fire collars in profiled steel decks Siphonic drainage with fire collars in profiled steel decks Yard- and carpark drains with fire collar system Flow rates for roof- and balcony drains Dallmer GmbH + Co. KG 5

6 Gravity roof drainage Roof drain type 62 DallBit Roof drain type 64 PVC Roof drains 62 and 64, raising piece 630: classics in the field of gravity roof drainage This is another product range we have extended in response to our customers demands for further options, suitable for the latest roofing and insulation methods. Our range now includes versions for all normally available vapour barriers and membranes including modified bitumen, FPO-PE, FPO-PP and PVC. A clamp ring is used to connect other membranes such as EPDM. All roof drains have flow rates in excess of the requirements of DIN EN Fire-proofing collar for profiled steel decks Fire-proofing solution for steel profile roofs Fire collars 8, 9 and 10 for steel profile roofs conforming to DIN provide fire proofing in compliance with IndBauRL* construction regulations. Other versions of our type 62 roof drains, used in combination with our fire- and soundproofing collars 1 and 5 are used for F 30/60/90 concrete decks Further information can be found in the section on fire protection systems for roof drains, starting on page 20. * This level of protection meets that of several other mentioned Standards - please enquire Dallmer and Kebu. A connection that lasts and lasts and lasts... Dallmer drains from the DallBit range are fitted with Kebuflex BR2 welded membrane collars manufactured by Kebu. This ensures optimum material quality, maximum durability and remarkably good elongation properties, crack bridging and thermal stability. In short: Kebu and Dallmer offer you proven quality which you can rely on under a wide range of conditions. Specifications Thickness: Reinforcement: Temperature range: Softening point: 5 mm polyester +130 C/ -20 C +151 C 6 Dallmer GmbH + Co. KG

7 Overflow drainage Overflow adapter type 86.1 The terms of DIN require guaranteed controlled operation of the rainwater drainage system under conditions of both partial load and overload, e.g. in a storm of the century situation. Dallmer overflow drains are designed for just this, as a combination of roof drain and overflow drainage fittings. The red colour immediately identifies them as a separate system. Unlike conventional parapet drains, they drain the flat roof where the water actually falls and not just round the edges. Dallmer type 86.1 overflow drain fittings are supplied for use with all roof drains, installed as an accessory with a sealing ring. As there is no connection created with the roof membrane, there is no need for it to be clamped or bonded. With a threaded arrangement they are height-adjustable between mm. As a high-performance variation on conventional parapet drains, the compact Powerdrain overflow drain type 86 (height adjustable mm) is normally installed in the insulation layer. Power overflow drain 86D DallBit Solution 1 Overflow drainage, free draining (spout) Up to 14.5 l/s! Solution 2 Overflow drainage via the downpipe Up to 21.5 l/s! Solution 3 Overflow drainage through the roof-space Example: Overflow adapter type 86.1, raising piece type 630 and roof drain type 62, for thermal insulation thickness of mm Advantages: - high drainage capacity of up to 14.4 l/s - no need to penetrate and seal off the roof-space - saves time and costs, as up to 70% less overflow drainage is needed Example: Overflow adapter type 86.1, raising piece type 630 and roof drain type 62, for thermal insulation thickness of mm Advantages: - high drainage capacity of up to 21.5 l/s - no need to penetrate and seal off the roof-space - saves time and costs, as up to 70% less overflow drainage is needed Example A: Overflow adapter type 86.1 and roof drain type 64 with horizontal run-off, for thermal insulation thickness of 160 mm or more Example B: Power overflow drain 86 D, for thermal insulation of 120 mm or more Advantages: - high drainage capacity with free run-off from the roof-space or via a downpipe Dallmer GmbH + Co. KG 7

8 Overview roof drains Roof drain type 62 Insulated roof drains for installation with or without thermal insulation H = heated version Roof drain type 62 clamp ring DN DN DN DN Roof drain type 62 H clamp ring DN DN DN DN Roof drain type 62DallBit DN DN DN DN Roof drain type 62 H DallBit DN DN DN DN Roof drain type 62 PVC DN DN DN DN Roof drain type 62 H PVC DN DN DN DN Roof drain type 62 FPO-PP DN DN DN DN Roof drain type 62 H FPO-PP DN DN DN DN Roof drain type 64 Insulated roof drains for installation with or without thermal insulation Roof drain type 64 clamp ring DN 70/ Roof drain type 64 DallBit DN 70/ Roof drain type 64 PVC DN DN Roof drain type 64 FPO-PP DN DN H = heated version Roof drain type 64 H clamp ring DN 70/ Roof drain type 64 H DallBit DN 70/ Roof drain type 64 H PVC DN DN Roof drain type 64 H FPO-PP DN DN Raising piece type 630 for roof construction with thermal insulation Raising piece type 630 clamp ring Part no Raising piece type 630 DallBit Part no Raising piece type 630 PVC Part no Raising piece type 630 FPO-PE Part no Raising piece type 630 FPO-PP Part no Roof drain type 83 and 84 for small roof areas without thermal insulation Roof drain type 83 D clamp ring DN DN Roof drain type 83 D DallBit DN DN Roof drain type 84 D clamp ring DN DN DN Roof drain type 84 D DallBit DN DN DN Dallmer GmbH + Co. KG Orders are accepted under our terms and conditions (

9 Overview power drains and accessories Power roof drain type 86 for installation into the thermal insulation Power roof drain type 86.0 DallBit DN Power roof drain type 86.0 PVC DN Power roof drain type 86.0 FPO-PP DN Power overflow drain type 86 Overflow drainage for installation into the thermal insulation Power overflow drain type 86 D DallBit DN Power overflow drain type 86 D PVC DN Power overflow drain type 86 D FPO-PP DN Accessories for roof drains Overflow adaptor type 86.1 Ø 310 mm Domed grating/ Gravel guard stainless steel type S 15 Ø 156 mm Domed grating/ Gravel guard type S 15 Ø 170 mm Domed grating/ Gravel guard type 63 T Ø 237 mm Perforated collar/ Gravel guard type S 15 Ø 170 mm Perforated collar inverted roof Ø 170 mm Flat grate type S 15 Ø 170 mm Flange seal S 65 Ø 279 mm Grating for green roofs 362 x 362 mm Balcony grating type SES 15 Dimension Art. Nr. 150 x 150 mm Balcony grating type GES x 200 mm Waterproofing collar type 65 PVC 500 x 500 mm Raising piece 362 x 362 mm Balcony grating SEN x 150 mm type 65 EPDM 500 x 500 mm type 65 rhepanol 500 x 500 mm type clamp ring: stainless steel clamp ring to secure all single-ply membranes type DallBit: rain body with factory-fitted collar of 5 mm modified bitumen membrane, welded to the flange and clamped with a stainless steel clamp ring type PVC: one-piece drain, moulded in PVC, PVC membranes can be welded to the flange type FPO-PE: extra wide flange for welding FPO-PE membranes directly type FPO-PP: extra wide flange for welding FPO-PP membranes directly H = roof drain heated version: connect to 230 V supply, conforming to VDE 0721, Part 1/3.78 All drainage capacities in l/s according to DIN EN 1253 see from page 32 Note: Fire protection systems for roof drains see from page 20 Orders are accepted under our terms and conditions ( Dallmer GmbH + Co. KG 9

10 Flat roof renovation the Dallmer way Simple. Secure. Tight-fitting. Renova roof drain type 63 T DallBit Flat roof renovations are time-consuming and laborious, especially when old roof drains have to be removed. But now that s a thing of the past: Dallmer s Renova roof drain 63 T saves you a great deal of time, nevertheless you can be sure of a secure, high-quality, professional solution. Our method: the old drain stays in place, and the renovation drain is pushed through the old drain to the new membrane level. The flexible lip seals ensure that the new drain can never leak when subject to backflow. The new Renova roof drain 63 T is available in sizes from DN 70 DN 150. Prepared for connections to bituminous, FPO-PP or PVC roof membranes or with a clamp flange for connection of other roof membranes. The Renova roof drain 63 T from Dallmer: just the job! Simple. The old roof drain stays in place and the new one is pushed through as far to the level of the new membrane, right into the existing downpipe. Secure. The flexible lip seals ensure a firm fit and even out irregularities in the old drain. At the same time they guarantee the necessary backflow resistance. The additional stainless steel clamp ring for the 63 T DallBit guarantees maximum resistance to wind load and prevents loosening of the roof membrane from the drain. Tight-fitting. The Renova roof drain 63 T fits inside all standard downpipe sizes. The body of our Renova roof drain 63 T is so compact that it can be fitted in virtually all old drains without difficulty. It is ideal for renovation projects involving either the laying of new roof membrane or extra layers of insulation. Renova roof drain Connection (old drain) 10 Dallmer GmbH + Co. KG

11 Overview renova roof drains Renova roof drain type 63 T Renova roof drain type 63 T DallBit Height 345 mm DN 70 inside mm DN 100 inside mm DN 125 inside mm DN 150 inside * Renova roof drain type 63 T FPO-PP Height 345 mm DN 70 inside mm DN 100 inside mm DN 125 inside * Drain body shape like 63 T clamp ring Renova roof drain type 63 T clamp ring Height 345 mm DN 70 inside mm DN 100 inside mm DN 125 inside mm DN 150 inside Dimensions Dimension Ø Pipe Outer edge rubber rib DN mm 73,5 mm DN mm 108 mm DN mm 123 mm 3DN mm 159 mm Renova roof drain type 63 T PVC Height 345 mm DN 70 inside mm DN 100 inside mm DN 125 inside mm DN 150 inside Lip diameter from - to Renova roof drain Ø min. lip Ø max. lip type 63 T DN mm 73,5 mm DN mm 108 mm DN mm 123 mm 3DN mm 159 mm Renova roof drain type 84 Renova roof drain type 84 clamp ring DN 70 inside DN 100 inside Renova roof drain type 84 DallBit DN 70 inside DN 100 inside All drainage capacities in l/s according to DIN EN 1253 see from page 32 Dallmer and Kebu. A connection that lasts and lasts and lasts... Dallmer drains from the DallBit range are fitted with Kebuflex BR2 welded membrane collars manufactured by Kebu. This ensures optimum material quality, maximum durability and remarkably good elongation properties, crack bridging and thermal stability. In short: Kebu and Dallmer offer you proven quality which you can rely on under a wide range of conditions. Orders are accepted under our terms and conditions ( Dallmer GmbH + Co. KG 11

12 SuperDrain siphonic roof drainage / Overflow drainage Roof drain SuperDrain type 62 with clamp ring Roof drain SuperDrain type 62 FPO-PP SuperDrain A SuperDrain roof drainage system (now incorporating an overflow system) offers significant advantages over gravity drainage, especially on very large roof areas. Rainwater flows into carefully dimensioned pipework running horizontally just beneath the roof. The pipework is designed to completely fill with rainwater which allows negative pressure to build, overcoming pressure losses in the system. Smaller bore pipework, running without a fall, with fewer downpipes means far less underground drainage, with large savings to be made in both materials and labour. Additions to the range are SuperDrain versions in PVC and FPO-PP, and a horizontal version for casting in. All of the drains are also available as type overflow drain. With the LGA certificate we also document the high quality of our products in terms of the level of harmful materials they contain. We will be happy to assist you in the planning, calculation and design of SuperDrain and overflow drainage systems. Advantages: - fewer down pipes permit improved building usability - pipework suspended beneath the roof at a uniform height with no gradient - significantly reduced pipework cost as a result of smaller pipes - less civil engineering work as a result of fewer building drains - cost-effective emergency drainage Overflow drain SuperDrain type 62 FPO-PP 12 Dallmer GmbH + Co. KG

13 Siphonic roof drainage, European distribution centre, IKEA, Germany DallPlan SuperDrain software Software standards Using our SuperDrain design program, we make calculations on the basis of the valid standards VDI 3086, EN , DIN and Brtish standard. Dallmer will be pleased to advise on the layout and flow calculations for your SuperDrain siphonic drainage project: please contact us. We can calculate a system for you for free, wichever pipe system is chosen eg.: - HDPE pipes to DIN SML ductile iron pipes to DIN EN steel pipes to DIN EN 1123 The result A calculation with DallPlan will give you: - a detailled isometric view of the proposed system - a complete list of roof drains AND every length of pipe, pipe-fittings and hagers needed for the installation - concise proposal with the calculation and the data for your records ) Your project data with the correct rainfall value is entered 2) We add your choice of pipe material and the correct Dallmer SuperDrain to integrate with the roof membrane, insulation and vapour barrier 3) The preferred layout of the drainage is selected 4 4) DallPlan software will calculate and hydraulically balance the design Dallmer GmbH + Co. KG 13

14 Overview SuperDrain roof and overflow drainage Roof drain SuperDrain type 62 for siphonic drainage, insulated roof drains for installation with or without thermal insulation H = heated version Roof drain SuperDrain type 62 clamp ring DN Roof drain SuperDrain type 62 H clamp ring DN Roof drain SuperDrain type 62 DallBit DN Roof drain SuperDrain type 62 H DallBit DN Roof drain SuperDrain type 62 PVC DN Roof drain SuperDrain type 62 H PVC DN Roof drain SuperDrain type 62 FPO-PP DN DN Roof drain SuperDrain type 62 H FPO-PP DN DN Overflow drain SuperDrain type 62 for siphonic drainage in a secondary system, insulated roof drains for installation with or without thermal insulation H = heated version Overflow drain SuperDrain type 62 clamp ring DN Overflow drain SuperDrain type 62 H clamp ring DN Overflow drain SuperDrain type 62 DallBit DN Overflow drain SuperDrain type 62 H DallBit DN Overflow drain SuperDrain type 62 PVC DN Overflow drain SuperDrain type 62 H PVC DN Overflow drain SuperDrain type 62 FPO-PP DN DN Overflow drain SuperDrain type 62 H FPO-PP DN DN Roof drain SuperDrain type 64 for siphonic drainage, insulated roof drains for installation with or without thermal insulation H = heated version Roof drain SuperDrain type 64 clamp ring DN Roof drain SuperDrain type 64 H clamp ring DN Roof drain SuperDrain type 64 DallBit DN Roof drain SuperDrain type 64 H DallBit DN Roof drain SuperDrain type 64 PVC DN Roof drain SuperDrain type 64 H PVC DN Roof drain SuperDrain type 64 FPO-PP DN Roof drain SuperDrain type 64 H FPO-PP DN Overflow drain SuperDrain type 64 for siphonic drainage in a secondary system, insulated roof drains for installation with or without thermal insulation H = heated version Overflow drain SuperDrain type 64 clamp ring DN Overflow drain SuperDrain type 64 H clamp ring DN Overflow drain SuperDrain type 64 DallBit DN Overflow drain SuperDrain type 64 H DallBit DN Overflow drain SuperDrain type 64 PVC DN Overflow drain SuperDrain type 64 H PVC DN Overflow drain SuperDrain type 64 FPO-PP DN Overflow drain SuperDrain type 64 H FPO-PP DN type clamp ring: stainless steel clamp ring to secure all single-ply membranes type DallBit: drain body with factory-fitted collar of 5 mm modified bitumen membrane, welded to the flange and clamped with a stainless steel clamp ring type PVC: one-piece drain, moulded in PVC, PVC membranes can be welded to the flange type FPO-PE: extra wide flange for welding FPO-PE membranes directly type FPO-PP: extra wide flange for welding FPO-PP membranes directly H = roof drain heated version: connect to 230 V supply, conforming to VDE 0721, Part 1/ Dallmer GmbH + Co. KG Orders are accepted under our terms and conditions (

15 Raising piece and power overflow drainage SuperDrain Raising piece type 630 for roof construction with thermal insulation Raising piece type 630 clamp ring Part no Raising piece type 630 DallBit Part no Raising piece type 630 PVC Part no Raising piece type 630 FPO-PE Part no Raising piece type 630 FPO-PP Part no Power overflow drain SuperDrain type 86 Overflow drain (Siphonic drainage conforming to EN ,20 m downpipe) Power overflow drain SuperDrain type 86 D DallBit DN Power overflow drain SuperDrain type 86 D PVC DN Power overflow drain SuperDrain type 86 D FPO-PP DN All drainage capacities in l/s according to DIN EN 1253 see from page 32 Note: For fire protection systems for roof drains, see from page 20 Dallmer and Kebu. A connection that lasts and lasts and lasts... Dallmer drains from the DallBit range are fitted with Kebuflex BR2 welded membrane collars manufactured by Kebu. This ensures optimum material quality, maximum durability and remarkably good elongation properties, crack bridging and thermal stability. In short: Kebu and Dallmer offer you proven quality which you can rely on under a wide range of conditions. Orders are accepted under our terms and conditions ( Dallmer GmbH + Co. KG 15

16 Overview balcony drains Balcony drain body type 83 and 84 Balcony drain bodies DN 50 and DN 70 for use in floors without a waterproofing Balcony drain body type 83 KF DN DN Balcony drain body type 84 KF DN DN Balcony drain body type 83 and 84 Balcony drain bodies DN 50 und DN 70 for use in waterproofed floors Balcony drain body type 83 DN DN Balcony drain body type 84 DN DN DN Balcony drain body type 83 DallBit DN DN Balcony drain body type 84 DallBit DN DN DN Balcony drain body type 83 FPO DN DN Balcony drain body type 84 FPO DN DN DN PVC flange S 10 with fastening screws for use with balcony drain body 83 FPO and 84 FPO. PVCmembranes can be welded to the flange. Complete balcony drains type 83 E and 84 E Balcony drain bodies DN 50 und DN 70 for use in waterproofed floors Balcony drain type 83 E DN DN Balcony drain type 84 E DN DN Raising piece type 85 used with balcony drains Raising piece type 85 Part no Raising piece type 85 DallBit Part no DallBit: Ø 420 mm collar of 5 mm thick bituminous membrane, welded to the flange and fitted with stainless steel clamp ring FPO: FPO-membranes based on polypropylene can be welded directly to the flange All drainage capacities in l/s according to DIN EN 1253 see from page Dallmer GmbH + Co. KG Orders are accepted under our terms and conditions (

17 Overview gratings and accessories Gratings used with balcony drain bodies Grating E 10 grate stainless steel, frame plastic 100 x 100 mm Grating ECN 10 grate and frame stainless steel, secured Grating KE 10 grate stainless steel, frame plastic 150 x 150 mm Grating KEN 10 grate stainless steel, secured, frame plastic Grating KR 10 with two-part plasticframe for connection of down pipes with d: mm 150 x 150 mm Aufsatz SEC 10 grate and frame stainless steel 150 x 150 mm Grating SEN 10 grate and frame stainless steel, secured 100 x 100 mm x 150 mm x 150 mm Grating SES 10 grate stainless steel, grate 5 mm stainless steel, secured 150 x 150 mm Accessories used with balcony drain bodies Domed grating/ Gravel guard S 10 Ø 125 mm Flat grate S 10 Ø 113 mm Self closing flap valve S 10* for frames 100 x 100 mm Ø 92 mm Perforated collar/ Gravel guard S 10 Ø 103 mm (must be used with S 10 clamp ring, Part Nr ) *Utilisation of flap-valves in balcony drains DN 70 anddn 100 decreases the flow to under the rate tested to DIN EN 1253 Clamp ring stainless steel S 10 Part no Seal S 10 Ø 110 mm Waterproofing collar PVC-flexible Ø 420 mm Waterproofing collar EPDM Ø 420 mm Waterproofing collar Rhepanol Ø 420 mm Dallmer and Kebu. A connection that lasts and lasts and lasts... Dallmer drains from the DallBit range are fitted with Kebuflex BR2 welded membrane collars manufactured by Kebu. This ensures optimum material quality, maximum durability and remarkably good elongation properties, crack bridging and thermal stability. In short: Kebu and Dallmer offer you proven quality which you can rely on under a wide range of conditions. Orders are accepted under our terms and conditions ( Dallmer GmbH + Co. KG 17

18 Rainwater hoppers type 605 and 660 Rainwater hopper type 605 The 605 and 660 hoppers are ideal for use with external down pipes d: 75, 90, 100 and 110 mm. They`re lightweight for quick installation, stop leaves getting swept into drains and are reliable means of sealing against smell on combined systems. Time-consuming frost-free installation is not necessary. They allow quick connection to downpipes of various sizes. Rainwater hopper 605 also has a ball joint and swivel for easy connection to underground pipes. Both drains can be maintaind without tools. Cleaning is easy thanks to the removable leaf basket and inspection cover. They keep your drains running freely! leaf basket 360 cleaning eye flap velve Dallmer GmbH + Co. KG

19 Overview rainwater hoppers and accessories Rainwater hopper type 605 Drain body DN 100 and DN 125 ball-joint adjustable 0-90 Rainwater hopper type 605 DN DN Flow rate DN 100 DN 125 6,0 l/s 6,7 l/s Rainwater hopper type 660 Rainwater hopper type 660 DN 100/DN Flow rate DN 100 DN 125 6,0 l/s 6,7 l/s Accessories for rainwater hopper type 605 and 660 Inspection cover Part no Inlet plates for down pipes d: 75, 90, 100 and 110 mm Part no Leaf-basket Part no A self-closing flap-valve prevents foul air escaping. As this works without a water seal, protection from freezing is not necessary. Orders are accepted under our terms and conditions ( Dallmer GmbH + Co. KG 19

20 Fire proofing for roof drains in concrete decks - Industrial Building Guideline When drains (or other penetrations) are present up to 5.0 m from a vertical wall with opening doors or windows in an F 30/60/90 roof structure, then the risk of fire-bridging must be catered for. Where drains are made of flammable material, the objective is to prevent burning debris from falling into the drain. This can be achieved by using a non-flammable cover. F 30/60/90 requirement (DIN 4102) requirement of DIN ( 2500 m 2 ) Fireproofing for roof drains in concrete decks R 30/60/90/120 Approval number Z Dallmer has a new, approved fire protection system for roof drains of this type. Approval is NRW - Z following testing at the German Institute for Building*. It provides R 30 - R 90 approval for an untrapped roof drain in a roof deck. The drains can be used with all membranes in common use - bitumen/asphalt, PVC, FPO, EPDM. The fire collar is for use with the type 62, DN70, supplied with a stainless steel domed grate. The collar is based on the proven versions developed for floor drains - easy installation and complete protection. Fire proofing with roof drain F 30/60/90 Sound-proofing collar mortar class II/III Fire-proofing collar HT/SML pipe coupling non-combustible pipe e.g. SML - cast iron Drain concrete 150 License no. abz Dallmer fire collars for roof drains offer: - approval Z for R 30 - R 90 applications - installation into F 30- F 90 decks - connection to all membranes - no special tools needed - built-in mortar-guard removes need for shuttering in space below - intumescent material in galvan sed steel container - minimal build-in height * This level of protection meets that of several other mentioned Standards - please enquire 20 Dallmer GmbH + Co. KG

21 Fire protection systems for profiled steel decks (roof area 2500 m 2 ) - Industrial Building Guideline NEW! Successful tested to DIN 18234/IndBauRL at the research centre for fire proofing technology, Karlsruhe Institute of Technology: Dallmer fire collar for steel profile roofs NEW! Fire collar for steel profile roof Profiled steel cladding is frequently used for large roof areas in industrial and commercial buildings. They are light, flexible, easy to handle and enable the construction work to be completed quickly. Their design means that they are subject to special fire prevention provisions, regulated by DIN and accepted generally. The risk evaluation is in the form of a systematic inspection of the entire roof structure, not just taking each of the materials or components into account. Special care must be paid to penetrations such as roof drains in order to prevent a fire from spreading over the roof. We have especially developed the Numbers 8, 9 and 10 fire proofing collars for these steel profile roof structures. They are located on the profile so that insulation can be installed right up to the drain housing, eliminating cold bridging. As components recognised by the general building authority approval (AZB) No. Z , they contain an intumescent material which in case of fire, closes the roof penetration and reliably seals it off in a downward direction. An important point for the roofer: when installed in combination with fire collars Nos 8, 9 and 10, our plastic roof drains types Roof drain in a steel profile roof 62 and SuperDrain 62 can be used for roof drainage on lightweight roofs, whilst conforming to the building regulations with regard to fire protection. Both specifiers and installers are assured of a practical and effective result when using tested and approved Dallmer systems. domed grating membrane insulation roof drain fire collar vapour barrier support plate corrugated steel deck Dallmer GmbH + Co. KG 21

22 Industrial Building Guideline, requirements for pipe sleeves Industrial building guideline (IndBauRL) The new Industrial Building Guideline (IndBauRL) governs the minimum requirements for fire safety of all industrial buildings. The new IndBauRL will become generally binding upon publication in the individual Federal states whilst developed for use in Germany, this guideline is widely accepted in many other countries. Under the heading of Technical Regulations for Fire Safety. It will help to ensure legally sound planning and simplify approval processes, particularly from the point of view of shortening the processing time.minimum requirements for fire safety under the Industrial Building Guideline particularly for: - Fire resistance of components and the combustibility of building materials - the size of fire compartments or fire-fighting compartments - the arrangement, location and length of escape routes Industrial buildings that meet the requirements of this guideline fulfil the safety aims of Sec. 17 para. 1 of the Model Building Code. Requirements Requirements for fireproof pipe sleeves Care must be given to the roof penetrations (roof drains) in profiled steel roofs. It is necessary to prevent flames and gases from entering the profile cavity. Where the underside of the roof is exposed to fire, if the roof penetration is executed incorrectly, the fire may spread within the roof structure. DIN defines the structural fire protection of large-area roofs exposed to fire from below. DIN 18234: Part 1: Terms, requirements and tests for roof areas without openings Part 2: List of roofs which fulfil the requirements of DIN : roof areas without openings. Part 3: Terms, requirements and tests, roof penetrations, roof connections and roof edges Part 4: List of roof penetrations, roof connections and roof edges which meet the requirements of DIN With combustible sleeves, fire protection collars must be fitted underneath the deck to prevent fire from penetrating the roof area. With profiled sheet metal roofs, fittings made from mineral fibre materials, melting point > 1000 C, density approx. 150 kg/m³, and a retaining plate must be mounted in the area of the sleeve. Roof drain type 62 DallBit plus fire collar 1 (for installation in a concrete roof) Roof drain type 62 PVC plus fire collar 8 (for installation in a profiled sheet metal roof) Overflow drain SuperDrain with fire collar 8 (for installation in a profiled sheet metal roof) 22 Dallmer GmbH + Co. KG

23 Note NOTE TO DIN / DIN 4102: The fitting of fire protection collars approved under DIN 4102 in solid ceilings cannot be used for the safe sealing of roof penetrations conforming to DIN : In the fire scenario according to DIN a flame curve occurs whose fire effect in the first 20 minutes is rated as more acute than the unit temperature curve according to DIN To be absolutely sure, an additional fire test according to DIN is necessary. The Dallmer intumescent material is tested to DIN 4102 for concrete decks and tested to DIN for profiled steel roof decks. Flame curve for DIN 18234/DIN 4102 degrees Celsius DIN DIN time/min. Installation advice: The roof insulation in the area of the sleeve must be of non-combustible quality, e.g. mineral fibre insulation, melting point >1000 C or phenolic resin foam according to DIN Covering an area of 1 m² insulation, the penetration should be arranged in the centre of the area. Other materials are permissible if a safe usability certificate is available. Successful tested to DIN 18234/IndBauRL at the research centre for fire proofing technology, Karlsruhe Institute of Technology: Dallmer fire collar for profiled steel roofs Dallmer GmbH + Co. KG 23

24 Overview gravity roof drains with fire protection to DIN 4102 in concrete decks MODULE 1 Domed grating/ g ravel guard Domed grating/ Gravel guard S 15* Ø 156 mm Part no * Note: where roof drain 62 is used in conjunction with a fire collar, the factory-fitted domed grating in polypropylene must be replaced with stainless steel gravel guard domed grating S 15. Be sure to include it in your order! + + plus MODULE 2 Roof drains DN 70 Roof drains DN 70 heated Roof drain Roof drain type 62 clampring DN 70 Part no Roof drain type 62 DallBit DN 70 Part no Roof drain type 62 clamp ring, heated DN 70 Part no Roof drain type 62 DallBit, heated DN 70 Part no Roof drain type 62 PVC DN 70 Part no Roof drain type 62 FPO DN 70 Part no Roof drain type 62 PVC, heated DN 70 Part no Roof drain type 62 FPO, heated DN 70 Part no plus with with MODULE 3 Fire and sound- insulating collar Fire and sound-insulating collar - installation kit 1 Part no Approval number Z Fire and sound-insulating collar - installation kit 5 Part no Approval number Z Dallmer GmbH + Co. KG Orders are accepted under our terms and conditions (

25 Options: raising piece for roof construction with thermal insulation MODU ULE 4 Raising piec ece type 630 for roof construction with thermal insulation Raising piece type 630 clamp ring Part no Raising piece type 630 DallBit (bitumen membrane) Part no Raising piece type 630 PVC Part no Raising piece type 630 FPO-PE Part no Raising piece type 630 FPO-PP Part no type clamp ring: stainless steel clamp ring to secure all single-ply membranes type DallBit: with factory-fitted collar of 5 mm modified bitumen membrane, welded to the flange and clamped with a stainless steel clamp ring type PVC: moulded in PVC, PVC membranes can be welded to the flange type FPO-PE: extra wide flange for welding FPO-PE membranes directly type FPO-PP: extra wide flange for welding FPO-PP membranes directly H = roof drain heated version: connect to 230 V supply, conforming to VDE 0721, Part 1/3.78 Installation in a concrete roof: - domed grating/gravel guard type S 15, stainless steel - raising piece type 630 DallBit - roof drain type 62 DallBit, DN 70 - fire and sound-insulating collar installation kit 1 Orders are accepted under our terms and conditions ( Dallmer GmbH + Co. KG 25

26 Overview roof drains for gravity drainage with fire protection to DIN for profiled steel decks Roof drains DN 70 Roof drains DN 90/DN 100 Roof drains DN 125 MODULE 1 Roof drain Roof drain type 62 PVC DN 70 Part no Roof drain type 62 PVC DN 100 Part no Roof drain type 62 PVC DN 125 Part no Roof drain type 62 H PVC, heated DN 70 Part no Roof drain type 62 H PVC, heated DN 100 Part no Roof drain type 62 H PVC, heated DN 125 Part no Roof drain type 62 FPO-PP DN 70 Part no Roof drain type 62 FPO-PP DN 90 Part no Roof drain type 62 FPO-PP DN 125 Part no Roof drain type 62 H FPO-PP, heated DN 70 Part no Roof drain type 62 H FPO-PP, heated DN 90 Part no Roof drain type 62 H FPO-PP, heated DN 125 Part no Roof drain type 62 FPO-PP DN 100 Part no Roof drain type 62 H FPO-PP, heated DN 100 Part no plus with with with MODULE 2 Fire protection kit Fire protection kit 8, corrugated steel DN 70 Part no Fire protection kit 9, corrugated steel DN 90/DN 100 Part no Fire protection kit 10, corrugated steel DN 125 Part no Dallmer GmbH + Co. KG Orders are accepted under our terms and conditions (

27 Options: - raising piece for roof construction with thermal insulation - and/or overflow adaptor MODULE 3 Raising piece type 630 for roof constructions with thermal insulation Raising piece type 630 clamp ring Part no Raising piece type 630 DallBit Part no Raising piece type 630 PVC Part no Raising piece type 630 FPO-PE Part no Raising piece type 630 FPO-PP Part no Overflow adaptor Overflow adapter 86.1 Ø 310 mm Part no type clamp ring: stainless steel clamp ring to secure all single-ply membranes type DallBit: drain body with factory-fitted collar of 5 mm modified bitumen membrane, welded to the flange and clamped with a stainless steel clamp ring type PVC: one-piece drain, moulded in PVC, PVC membranes can be welded to the flange type FPO-PE: extra wide flange for welding FPO-PE membranes directly type FPO-PP: extra wide flange for welding FPO-PP membranes directly H = roof drain heated version: connect to 230 V supply, conforming to VDE 0721, Part 1/3.78 Installation in a profiled sheet metal roof: - raising piece type 630 PVC - roof drain type 62 FPO, DN fire protection kit 9, corrugated steel - support plate 1000 x 1000 x 1,5 mm Orders are accepted under our terms and conditions ( Dallmer GmbH + Co. KG 27

28 Overview siphonic roof drains with fire protection to DIN in profiled steel decks Roof drains SuperDrain DN 70 Roof drains SuperDrain DN 90 MODULE 1 Roof drain SuperDrain for siphonic drainage Roof drain SuperDrain 62 PVC DN 70 Part no Roof drain SuperDrain 62 H PVC, heated DN 70 Part no Roof drain SuperDrain 62 FPO-PP DN 90 Part no Roof drain SuperDrain 62 H FPO-PP, heated DN 90 Part no Roof drain SuperDrain 62 FPO-PP DN 70 Part no Roof drain SuperDrain 62 H FPO-PP, heated DN 70 Part no Roof drains SuperDrain DN 70 Roof drains SuperDrain DN 90 Overflow drain SuperDrain 62 PVC DN 70 Part no Overflow drain SuperDrain 62 H PVC, heated DN 70 Part no Overflow drain SuperDrain 62 FPO-PP DN 90 Part no Overflow drain SuperDrain 62 H FPO-PP, heated DN 90 Part no Overflow drain SuperDrain 62 FPO-PP DN 70 Part no Overflow drain SuperDrain 62 H FPO-PP, heated DN 70 Part no plus with with MODULE 2 fire protection kit Fire protection kit 8, corrugated steel DN 70 Part no Fire protection kit 9, corrugated steel DN 90/DN 100 Part no Dallmer GmbH + Co. KG Orders are accepted under our terms and conditions (

29 Optional: raising piece for roof construction with thermal insulation MODULE 3 Raising piece type 630 for roof construction with thermal insulation Raising piece type 630 clamp ring Part no Raising piece type 630 DallBit Part no Raising piece type 630 PVC Part no Raising piece type 630 FPO-PE Part no Raising piece type 630 FPO-PP Part no type clamp ring: stainless steel clamp ring to secure all single-ply membranes type DallBit: drain body with factory-fitted collar of 5 mm modified bitumen membrane, welded to the flange and clamped with a stainless steel clamp ring type PVC: one-piece drain, moulded in PVC, PVC membranes can be welded to the flange type FPO-PE: extra wide flange for welding FPO-PE membranes directly type FPO-PP: extra wide flange for welding FPO-PP membranes directly H = roof drain heated version: connect to 230 V supply, conforming to VDE 0721, Part 1/3.78 Installation in a profiled sheet metal roof: - raising piece type 630 PVC - roof drain type 62 SuperDrain FPO, DN 70 - fire protection kit 8, corrugated steel - support plate 1000 x 1000 x 1,5 mm Orders are accepted under our terms and conditions ( Dallmer GmbH + Co. KG 29

30 Overview yard drains with fire prevention MODULE 1 Yard drain Yard drain type with frost-proof self-closing flap-valve, ductile iron gate class A (1,5 t) DN 100 Part no Yard drain type with frost-proof self-closing flap-valve, height adjustable, ductile iron gate, class A (1,5 t) DN 100 Part no Yard drain type DallBit* with frost-proof self-closing flap-valve,height adjustable, ductile iron gate, class A (1,5 t) DN 100 Part no Yard drain type with frost-proof self-closing flap-valve, ductile iron grate and frame secured, class B (12,5 t) DN 100 Part no Yard drain type with frost-proof self-closing flap-valve, height adjustable, ductile iron grate and frame secured, class B (12,5 t) DN 100 Part no Yard drain type DallBit* with frost-proof self-closing flap-valve, height adjustable, ductile iron grate and frame secured, class B (12,5 t) DN 100 Part no * Drain body with welded bituminous membrane collar, 500 x 500 mm, 4.7 mm thick, fitted with stainless steel clamp ring for added security + plus MODULE 2 Approval number R 30/60/90 Z R 120 Approval number Z Fire and sound- insulating collar - installation kit To comply with fire protection class R 120, the existing frost-proof flap-valve must be replaced with the trap insert. + Fire and sound-insulating collar - installation kit 4 DN 100 Part no Fire and sound-insulating collar - installation kit 4 DN 100 Part no Trap insert Part no Dallmer GmbH + Co. KG Orders are accepted under our terms and conditions (

31 Accessories yard drains ACCESSORIES Raising piece type 618 Art.-Nr Raising piece type 618 DallBit* Part no Clamp ring stainless steel DG 15 floor construction with poured asphalt Part no Trap insert, 50 mm water seal Part no * Drain body with welded bituminous membrane collar, 500 x 500 mm, 5 mm thick, fitted with stainless steel clamp ring for added security For installation in poured asphalt: - ductile iron gate - raising piece type 618 DallBit - yard drain type DallBit - fire and sound-insulating collar - installation kit 1 Orders are accepted under our terms and conditions ( Dallmer GmbH + Co. KG 31

32 Flow rate in litres/second tested to DIN EN 1253 Gravity drainage Roof drains Dimension DIN EN 1253 Water level over drain 5 mm 15 mm 25 mm 35 mm 45 mm 55 mm 65 mm 75 mm Roof drain type 62 clamp ring / DallBit DN 70 vertical 1,7 (35 mm) 0,90 3,50 6,80 9,90 13,20 15,00 15,10 15,20 " DN 100 vertical 4,5 (35 mm) 1,00 4,10 7,30 10,70 14,50 18,30 23,20 29,40 " DN 125 vertical 7,0 (45 mm) 1,00 4,10 6,90 10,20 14,00 17,70 22,40 27,70 " DN 150 vertical 8,1 (45 mm) 1,00 4,20 7,10 10,30 14,10 18,00 22,60 28,40 Roof drain type 62 PVC/FPO DN 70 vertical 1,7 (35 mm) 0,55 2,30 4,50 7,40 10,60 12,85 16,30 16,30 " DN 90 vertical 4,5 (35 mm) 0,65 2,50 5,00 7,90 11,50 15,30 19,40 22,10 " DN 100 vertical 4,5 (35 mm) 0,65 2,50 5,00 7,85 11,45 15,20 19,20 23,60 " DN 125 vertical 7,0 (45 mm) 0,60 2,50 4,90 7,50 10,75 14,40 18,70 23,10 " DN 150 vertical 8,1 (45 mm) 0,55 2,55 4,95 7,70 11,10 14,50 18,20 23,60 Roof drain type 64 clamp ring / DallBit DN 70 horizontal 1,7 (35 mm) 0,90 3,80 6,00 10,00 13,50 16,50 16,70 16,80 " DN 100 horizontal 4,5 (35 mm) 0,90 3,80 5,10 6,00 6,50 6,50 6,50 6,50 Roof drain type PVC/FPO DN 70 horizontal 1,7 (35 mm) 0,65 2,50 4,40 6,90 10,30 13,60 17,15 17,60 " DN 100 horizontal 4,5 (35 mm) 0,60 2,70 5,10 7,80 11,40 15,25 19,40 24,20 Roof drain for small roof areas Dimension DIN EN 1253 Water level over drain 5 mm 15 mm 25 mm 35 mm 45 mm 55 mm 65 mm 75 mm Roof drain type 83 D DN 50 horizontal 0,9 (35 mm) 0,60 1,00 1,10 1,20 1,30 1,40 1,40 1,50 " DN 70 horizontal 1,7 (35 mm) 0,90 2,20 4,20 5,50 7,20 9,40 12,80 16,00 Roof drain type 84 D DN 50 vertical 0,9 (35 mm) 0,90 2,40 3,70 4,40 5,40 5,50 5,70 5,80 " DN 70 vertical 1,7 (35 mm) 0,90 2,20 3,80 4,90 6,80 9,00 12,00 14,60 " DN 100 vertical 4,5 (35 mm) 0,90 2,10 4,20 5,70 7,20 9,50 12,60 17,00 Overflow drain Dimension DIN EN 1253 Water level over drain 5 mm 15 mm 25 mm 35 mm 45 mm 55 mm 65 mm Overflow adapter 86.1 with roof drains 62 and 64 (downpipe = 3 m) 62 clamp ring/dallbit/pvc/fpo DN 70 vertical 1,7 (35 mm) 0,80 3,60 5,90 8,70 12,10 14,80 15,00 " DN 100 vertical 4,5 (35 mm) 0,90 3,80 6,40 9,10 12,20 15,80 20,10 " DN 125 vertical 7,0 (45 mm) 0,90 3,80 6,20 9,10 12,10 15,70 20,00 " DN 150 vertical 8,1 (45 mm) 0,90 3,70 6,50 9,30 12,80 16,50 21,50 64 clamp ring/dallbit/pvc/fpo DN 70 horizontal 1,7 (35 mm) 0,70 3,90 6,10 8,80 11,10 15,00 17,50 " DN 100 horizontal 4,5 (35 mm) 0,90 3,70 6,40 8,90 12,10 15,90 20,10 Overflow adapter 86.1 with roof drains 62 and 64 (free draining) 62 clamp ring/dallbit/pvc/fpo DN 70 vertical 1,7 (35 mm) 0,90 3,20 5,40 5,40 5,50 5,60 5,70 " DN 100 vertical 4,5 (35 mm) 0,80 3,20 5,50 8,10 9,60 10,10 10,50 " DN 125 vertical 7,0 (45 mm) 1,10 3,70 6,00 8,50 11,60 13,90 14,40 " DN 150 vertical 8,1 (45 mm) 0,80 3,20 5,80 8,10 9,20 10,20 11,00 64 clamp ring/dallbit DN 70 horizontal 1,7 (35 mm) 1,20 3,60 5,40 5,60 5,70 5,90 6,00 " DN 100 horizontal 4,5 (35 mm) 0,80 3,30 4,10 4,20 4,30 4,40 4,50 64 PVC/FPO DN 70 horizontal 1,7 (35 mm) 1,20 3,60 5,40 5,60 5,80 6,00 6,30 " DN 100 horizontal 4,5 (35 mm) 1,10 3,80 6,00 7,00 7,30 7,50 7,70 Power-Drain Dimension DIN EN 1253 Water level over drain 5 mm 15 mm 25 mm 35 mm 45 mm 55 mm 65 mm Power-Drain 86 D (free draining) DN 70 horizontal 1,7 (35 mm) 1,00 3,80 3,90 4,10 4,20 4,30 4,50 Power-Drain 86 D (downpipe = 3 m) DN 70 horizontal 1,7 (35 mm) 0,70 3,20 7,30 12,00 15,60 16,00 16,00 Power-Drain Dimension DIN EN 1253 Water level over drain 5 mm 15 mm 25 mm 35 mm 45 mm 55 mm 65 mm Power-Drain 86 D (free draining) DN 70 horizontal 1,7 (35 mm) 1,00 3,80 3,90 4,10 4,20 4,30 4,50 Power-Drain 86 D (downpipe = 3 m) DN 70 horizontal 1,7 (35 mm) 0,70 3,20 7,30 12,0 15,60 16,00 16,00 32 Dallmer GmbH + Co. KG

33 Flow rate in litres /second tested to DIN EN 1253 Gravity drainage renova roof drain Dimension DIN EN 1253 Water level over drain 5 mm 15 mm 25 mm 35 mm 45 mm 55 mm 65 mm 75 mm Renova roof drain type 63 T DallBit DN 70 vertical 1,7 (35 mm) 0,60 2,10 3,50 6,10 9,60 11,80 13,30 13,40 " DN 100 vertical 4,5 (35 mm) 0,70 2,50 4,60 7,50 10,40 13,50 17,90 22,50 " DN 125 vertical 7,0 (45 mm) 0,70 2,40 4,20 6,90 9,40 12,60 16,50 20,10 " DN 150 vertical 8,1 (45 mm) 1,00 4,30 7,40 10,70 15,00 19,00 23,70 29,80 Renova roof drain type 63 T FPO-PP DN 70 vertical 1,7 (35 mm) 0,60 2,10 3,50 6,10 9,60 11,80 13,30 13,40 " DN 100 vertical 4,5 (35 mm) 0,70 2,50 4,60 7,50 10,40 13,50 17,90 22,50 " DN 125 vertical 7,0 (45 mm) 0,70 2,40 4,20 6,90 9,40 12,60 16,50 20,10 Renova roof drain type 63 T clamp ring DN 70 vertical 1,7 (35 mm) 0,80 3,60 6,80 9,70 12,90 13,30 13,50 13,60 " DN 100 vertical 4,5 (35 mm) 0,90 3,90 6,90 9,60 12,50 15,50 17,50 22,30 " DN 125 vertical 7,0 (45 mm) 0,90 4,30 7,50 10,90 14,20 18,50 23,00 24,30 " DN 150 vertical 8,1 (45 mm) 1,00 4,30 7,40 10,70 15,00 19,00 23,70 29,80 Renova roof drain type 63 T PVC DN 70 vertical 1,7 (35 mm) 0,80 2,70 4,90 7,90 11,00 13,30 13,50 13,60 " DN 100 vertical 4,5 (35 mm) 0,80 2,80 5,10 8,10 11,70 15,50 19,00 23,90 " DN 125 vertical 7,0 (45 mm) 0,80 2,80 5,20 8,30 11,80 15,50 19,50 24,00 " DN 150 vertical 8,1 (45 mm) 0,80 2,50 5,00 8,00 11,30 14,80 18,90 23,70 Renova roof drain type 84 DN 70 vertical 1,7 (35 mm) 0,50 2,10 3,60 4,90 6,40 8,60 11,40 11,80 " DN 100 vertical 4,5 (35 mm) 0,50 2,60 4,60 6,20 7,80 10,50 14,20 17,30 Complete balcony drains Dimension DIN EN 1253 Water level over drain 5 mm 15 mm 25 mm 35 mm Balcony drain type 83 E DN 50 horizontal 0,9 (35 mm) 0,40 1,20 1,60 1,60 " DN 70 horizontal 1,7 (35 mm) 0,40 1,10 1,60 1,90 Balcony drain type 84 E DN 50 vertical 0,9 (35 mm) 0,40 1,30 2,50 2,50 " DN 70 vertical 1,7 (35 mm) 0,40 1,40 2,00 2,00 Balcony drain body type Dimension DIN EN 1253 Water level over drain 5 mm 15 mm 25 mm 35 mm 45 mm 55 mm 65 mm 75 mm Balcony drain body type 83, 83 DallBit, 83 KF oder 83 FPO DN 50 horizontal 0,9 (35 mm) 0,60 1,00 1,10 1,20 1,30 1,40 1,40 1,50 " DN 70 horizontal 1,7 (35 mm) 0,90 2,20 4,00 5,50 7,20 9,40 12,80 16,00 Balcony drain body type 84, 84 DallBit, 84 KF oder 84 FPO DN 50 vertical 0,9 (35 mm) 0,90 2,40 3,70 4,40 5,40 5,50 5,70 5,80 " DN 70 vertical 1,7 (35 mm) 0,90 2,20 3,80 4,90 6,80 9,00 12,00 14,60 " DN 100 vertical 4,5 (35 mm) 0,90 2,10 4,20 5,70 7,20 9,50 12,60 17,00 Siphonic drainage Roof drains SuperDrain Dimension DIN EN 1253 Water level over drain 5 mm 15 mm 25 mm 35 mm 45 mm 55 mm 65 mm 75 mm SuperDrain 62 clamp ring/dallbit DN 70 vertical 12,0 (55 mm) 0,60 2,50 5,00 10,60 16,80 17,40 17,40 17,40 SuperDrain 62 PVC/FPO-PP DN 70 vertical 12,0 (55 mm) 0,70 2,45 4,85 10,95 16,75 17,40 17,40 17,40 " DN 90 vertical 18,0 (55 mm) 0,80 2,40 4,30 10,40 16,30 22,30 22,30 22,30 SuperDrain 64 clamp ring/dallbit DN 70 horizontal 12,0 (55 mm) 0,60 2,10 4,40 9,90 16,25 18,70 18,70 18,70 SuperDrain 64 PVC/FPO DN 70 horizontal 12,0 (55 mm) 0,45 1,85 3,90 9,15 15,80 18,40 18,40 18,40 Overflow drains SuperDrain Dimension DIN EN 1253 Water level over drain 5 mm 15 mm 25 mm 35 mm 45 mm 55 mm 65 mm Overflow drain SuperDrain 62 clamp ring/dallbit DN 70 vertical 12,0 (55 mm) 0,70 3,40 6,70 11,20 17,30 17,40 17,40 Overflow drain SuperDrain 62 PVC/ FPO-PP DN 70 vertical 12,0 (55 mm) 0,70 3,40 6,60 11,10 17,20 17,30 17,30 " DN 90 vertical 18,0 (55 mm) 0,80 3,30 6,50 11,20 17,10 22,00 22,00 Overflow drain SuperDrain 64 clamp ring/dallbit DN 70 horizontal 12,0 (55 mm) 0,90 3,80 7,30 12,10 18,00 18,70 18,70 Overflow drain SuperDrain 64 PVC/ FPO-PP DN 70 horizontal 12,0 (55 mm) 0,80 3,80 7,30 12,20 18,40 18,50 18,50 Water level over drain Power -Drain 86 D Dimension DIN EN mm 15 mm 25 mm 35 mm 45 mm 55 mm 65 mm Power-Drain 86 D (downpipe = 4,2 m) DN 70 horizontal 12,0 (55 mm) 0,70 3,80 7,50 12,10 17,70 17,90 17,90 Dallmer GmbH + Co. KG 33

34 DALLMER: Roof, yard and car park drains 34 Dallmer GmbH + Co. KG

35 Dallmer GmbH + Co. KG 35