Dispersing Agent. Water Proofing Compound Suncrete Sun SBR Emulsion. SNF Liquid & Powder

Transcription

1

2 P roducts C atalogue Dispersing Agent SNF Liquid & Powder Ad-mixtures Sunplast Super - QC 1100 QC 2100 QC 3100 Sunplast Super - QC 4100 QC 5100 QC 6100 Sunplast PCE - PC 2550 PC 3050 PC 3550 Sunplast PCE - PC 4050 PC 5050 PC 6050 Concrete Aid Aluminised Curing Compound Sunplast Super ACF Shuttering Oil EZY Slip Aid Concrete Curing Compound Sun-Seal PS-PG (2 Component Polysulphide Sealant) Sun-Epoxy ( 2 Component) Water Proofing Compound Suncrete Sun SBR Emulsion

3 Dispersing Agent Specifications Chemical Nature Appearance Solubility (10% Sol. in Water) ph (10% Solution in Water) Specific Gravity (gm / ml) Nature of Ash Chlorine Lead Solid Content (w/w%) Salt Content (w/w%) Dispersion Test Flammability Sodium Salt of Naphthalene Sulphonic Acid Condensate Dark Brown Colored Liquid Light Brown Powder Should be clear. Good. No precipitate to min. N.A. Absent - Sulphate Positive Nil 42.0 min. 92 min max on 100% basis 30.0 max on 100% basis Should Pass Non Flammable 25 Kg. Bags Advantages

4 Ad-Mixture Sunplast Super Specifications Standard Appearence Base Sp. Gravity ph Viscosity Chloride Content % of Na SO 2 4 Dry Content Application 250/220 Kgs in Drum or Bulk in Tanker Load.

5 Ad-Mixture Sunplast Super Sunplast Super is a Concrete Super Plasticizer-Cum-Retarder and can significantly help to attain high slump and retention by reducing high amount of water in mix designs. Being a Chloride free Product, it is safe for use in Precast & Pre-Stressed concrete production also. Specifications Standard Appearence Base Sp. Gravity ph Viscosity Chloride Content % of Na SO 2 4 Dry Content Application 250 Kgs in Drum or Bulk in Tanker Load IS: Brown Colour Liquid S.N.F ± to Sec NIL N.A. 48 ± 2 % Offsite Plants Usage: Ready Mix Concrete, Precast & Prestressed Concrete. Dosage: 200ml to 600ml / 50 Kg Cement. Actual dosage required to achieve desired parameters will depend on the types of cement, the size of aggregate and the total design being used. The exact dosage should be determined by on site trials. Compatibility: Can be used with all types of Portland Cement, Sulphate Resisting Cements, Micro Silica and fly ash. Shelf Life: One year.

6 Ad-Mixture Sunplast - PCE New Generation Slump Retaining Concrete Superplasticizer Sunplast PCE is a high performance (high strength and durability) super plasticizer for concrete based on a polycarboxylate ether polymer. It comprises of particles in the size range of 0.25 to 0.35 micrometers (µm) and is synthesized through nano-scale polymerization. It is a high range super plasticizer (water reduction up to 40% in control concrete) with superior cement dispersion ability to provide extremely high slump values, even to concrete mixtures made with water-to-cement ratio of less than It is highly dosage efficient a much smaller dosage as compared to conventional super plasticizers is only sufficient.imparts high flow ability to the mixture so as to fill the formwork under its own weight (self compacting ability) without any voids or segregation of aggregates. This self compacting concrete (SCC) maintains fluidity for longer periods (about 4 hours at 35 C because of the presence of SLCA). SLCA prevents slump losses by parachute effect of slow adsorption on Ettringite crystals formed at the beginning of cement hydration. Sunplast PCE is especially recommended for Ready Mix Concrete production because of its very high slump retention characteristic imparted by SLCA. For long distance transportation in a tropical climate or when traffic delays are expected in the transportation of concrete from plant to site, a concrete plasticized by SUNPLAST PCE can retain smooth pump ability with minimal set retardation. Ready mixed concretes of moderate to very high strengths can be produced using this super plasticizer. Sunplast PCE imparts high self-compaction or self-leveling, reduces shrinkage and creep, increases flexural strength, reduces carbonation, improves adhesion to re-enforcing and pre-stressing steel and develops early strength. It helps in producing a cohesive, smooth and fair faced concrete. Sunplast - PCE Specifications Appearance Base Sp Gravity ph Chloride Content Dry Content Dosage PC 2550 PC 3050 PC 3550 Amber Colour Liquid Polycarboxylate Ethers 1.06±.01 7 ± 1 Nil (BS: 5075) 18 ± 1 % 0.4 to 1.2 % Amber Colour Liquid Polycarboxylate Ethers 1.08 ± ± 1 Nil (BS: 5075) 22 ± 1 % 0.4 to 1.2 % Amber Colour Liquid Polycarboxylate Ethers 1.10 ± ± 1 Nil (BS: 5075) 26 ± 1 % 0.4 to 1.2 % 50 kg and 200 kg HDPE drums. Small and Bulk packing on request. Sunplast PCE can be used with all types of OPC, composite cement (PSC and PPC), Silica Fume, Meta kaolin, Rice Husk Ash (RHA), Pulverized Fuel Ash (PFA) and Ground Granulated Blast Furnace Slag (GGBFS). Standard: Conforms to ASTM C 494 Type B, Type D and Type G and complies with IS: Storage: To be stored away from heat and frost. Shelf Life: Best before 12 months from the date of manufacturer.

7 Ad-Mixture Sunplast - PCE New Generation Slump Retaining Concrete Superplasticizer Sunplast PCE is a high performance (high strength and durability) super plasticizer for concrete based on a polycarboxylate ether polymer. It comprises of particles in the size range of 0.25 to 0.35 micrometers (µm) and is synthesized through nano-scale polymerization. It is a high range super plasticizer (water reduction up to 40% in control concrete) with superior cement dispersion ability to provide extremely high slump values, even to concrete mixtures made with water-to-cement ratio of less than It is highly dosage efficient a much smaller dosage as compared to conventional super plasticizers is only sufficient.imparts high flow ability to the mixture so as to fill the formwork under its own weight (self compacting ability) without any voids or segregation of aggregates. This self compacting concrete (SCC) maintains fluidity for longer periods (about 4 hours at 35 C because of the presence of SLCA). SLCA prevents slump losses by parachute effect of slow adsorption on Ettringite crystals formed at the beginning of cement hydration. Sunplast PCE is especially recommended for Ready Mix Concrete production because of its very high slump retention characteristic imparted by SLCA. For long distance transportation in a tropical climate or when traffic delays are expected in the transportation of concrete from plant to site, a concrete plasticized by SUNPLAST PCE can retain smooth pump ability with minimal set retardation. Ready mixed concretes of moderate to very high strengths can be produced using this super plasticizer. Sunplast PCE imparts high self-compaction or self-leveling, reduces shrinkage and creep, increases flexural strength, reduces carbonation, improves adhesion to re-enforcing and pre-stressing steel and develops early strength. It helps in producing a cohesive, smooth and fair faced concrete. Sunplast - PCE Specifications Appearance Base Sp Gravity ph Chloride Content Dry Content Dosage PC 4050 PC 5050 PC 6050 Amber Colour Liquid Polycarboxylate Ethers 1.12 ±.01 7 ± 1 Nil (BS: 5075) 30 ± 1 % 0.3 to 1.0 % Amber Colour Liquid Polycarboxylate Ethers 1.15 ± ± 1 Nil (BS: 5075) 34 ± 1 % 0.3 to 1.0 % Amber Colour Liquid Polycarboxylate Ethers 1.17 ± ± 1 Nil (BS: 5075) 38 ± 1 % 0.2 to 0.8 % 50 kg and 200 kg HDPE drums. Small and Bulk packing on request. Sunplast PCE can be used with all types of OPC, composite cement (PSC and PPC), Silica Fume, Meta kaolin, Rice Husk Ash (RHA), Pulverized Fuel Ash (PFA) and Ground Granulated Blast Furnace Slag (GGBFS). Standard: Conforms to ASTM C 494 Type B, Type D and Type G and complies with IS: Storage: To be stored away from heat and frost. Shelf Life: Best before 12 months from the date of manufacturer.

8 Concrete Aid Aluminised Curing Compound Specifications

9 Concrete Aid Specifications Appearence Base Sp. Gravity ph Viscosity Chloride Content Dry Content Application Colourless Liquid Inorganic/Organic Blend of Accelerators 1.5 ±.02 7 to Sec NIL N.A. 30 ± 2% gms. / 50 Kg Cement 5 / 10 / 50 / 100 / 220 Kg Carbuoy / Drum

10 Concrete Aid Shuttering Oil It is a concentrated emulsified chemical mould release oily liquid. it is carefully blended combination of refined emulsified mineral oil and chemicals release agent. Available in water emulsifiable form also. 1 Ltr. oil cube mixed with 3-4 ltr. water. Advantages It gives coverage of 8 to 10 m 2 per liter depending on the surface texture & porosity of the formwork. Shuttering Oil Specifications Form Color Sp. Gravity Emulsion Stability Liquid Brown Color 0.85 Kg / Ltr Pass 200 Ltrs. / 50 Ltrs. Usage: It is used for easy- strainfree release of concrete moulds and all type of framework.

11 Concrete Aid Concrete Pumping Aid Versatile dry powdered concrete pumping aid. Ready to use water soluble powder. It's a 100 % replacement for cement or grout slurries. Very low cost material compared to cement or primer slurries. Compatible with all concrete material. Contains no harmful substances environmentally safe. Advantages And Use Direction to Use: Use one pouch of ( 250 g ) in ltrs of water to prime 150 ft. of 5-inch pump line. Mix for five minutes, pour into the priming port or hopper just prior to pumping.

12 Concrete Aid Concrete Curing Compound It's a white Synthetic Emulsion based concrete curing compound. On drying, it forms a thin film barrier which allows the concrete to retain sufficient water for maximum curing, without disturbing the normal setting action. This economical curing compound eliminates the need for keeping concrete continuously wet. Due to white emulsion it reflects the light & heat & minimizes the chance of cracking of the surfaces. Specifications Standard Dilution Ratio Drying Time Coverage SPECIFICATIONS 1 Ltr. to 2 to 3 Ltr. water o Appx. 2-3 Hrs at 30 C m / Ltr depending on the concrete surface, humidity and temperature. Available in 100 Ltrs. & 210 Ltrs. Drums. Method of Application: Should be applied uniformly at proper coverage by brush or spray on the fresh concrete after the surface has become free from bleeding water & final troweling is over. Storage: Store in cool dry place under roof. Shelf Life: One year in sealed container.

13 Concrete Aid Sun-Seal PS-PG (2 Component Polysulphide Sealant) Colour Solid Contents Specific Gravity Setting time Shore A Hardness Compliance Movement Accommodation Service Temprature Application Temp Coverage, rm, grm SUN-SEAL PS-PG Grey % Pot Life Min. 2 Hrs/ Setting 6 Hrs/ Full Cure Max 8 Days 7+/-2 BS 5212:1990 Part I,Type F & FB(Flame and Fuel Resistance) : IS 12118Part Butt Joints ± 25% :Lap Joints ± 50% -40 to 85 Deg. C 5 to 50 Deg. C 55 For 2.5 mm x 12.5 mm Applications & Advantages Ÿ Excellent Thermal,UV, Chemical & Water resistance after full cure is over. Ÿ For expansion joints in industrial, commercial or residential buildings. Ÿ Joints in concrete roads bridges, subways, flyovers & airport runway. Ÿ Adhesion compatible to most substrates. Ÿ Joints in water retaining structures like water tank, swimming pool, aqueducts,dams, canals & reservoirs. Ÿ Atomic nuclear power station reactor domes. Ÿ Joints between pipe lines & Roof Light Joints. Ÿ Suitable for potable water after full cure. Ÿ Very High Service Life & Flame Resistant. : 4 Kg. Pails

14 Concrete Aid Sun-Epoxy ( 2 Component) Sun-Epoxy Specifications: Appearence Components Mix Ratio Pot Life Curing Time Thermal Expansion Mixing Method Shelf Life Applications SUN-EPOXY Colorless Liquid / White Powder Resin & Hardner + Filler 2 Part Resin + 1 Part Hardner + 10 to 15 Part Filler 40 min. at 25 Deg. C of 100 g mix 24 Hrs at 25 Deg. C ~NIL Manual / Mechanical 1 year Grouting, Rebarring, Water Proofing, Filling, Die Casting 5 / 10 / 50 / 100 / 220 Kg Carbuoy / Drum Advantages of Sun-Epoxy

15 Water Proofing Compound Suncrete Suncrete is a ready to use bonding agent as well crack filler in liquid consistency. It is used for repair of spalled concrete floors, columns, beams, chhajas, slabs & waterproofing of toilets & bathrooms, small terraces etc. as it bonds strongly to old & new concrete and to plasters. It reduces shrinkage, prevents cracking, dust pick up & improves abrasion resistance. It is also used as crack filler for interior use. Features & Benefits Multipurpose Cracking Hardness Shrinkage Bonding Erosion & corrosion Abrasion resistance Grouting It is multipurpose & economical product, easy to use. It prevents cracking by improving flexural strength. Improves the hardness & prevents dust generation. Reduces drying & aging shrinkage cracks. Bond strongly to concrete, masonry, stonework, plasters, cementitious surfaces, asphalt & most of the building materials. Improves erosion resistance & prevents corrosion. Improves abrasion resistance of the cement mix. Reduces viscosity of cement injection grout for better fluidity & bonding. Precautions & Limitations

16 Water Proofing Compound Sun SBR Emulsion Primary Uses Ÿ Ÿ Ÿ In floor repairs, it used in mortar as an additive to make screeds which can be feather edged and can be used successfully in restoring the nosing of floor ducts and stairs In case of multi layered plaster it bonding slurry helps in building up layer after layer. The bond coat not only serves as a bonding agent but also as a water proof barrier It modified mortars are used in joining prefabricated members and as bedding mortar in precast block work to secure water tight joints Ÿ Ÿ Ÿ Ÿ Ÿ With fine sand cement mortar it is admixed to get an excellent adhesive for fixing wall paneling, stones and tiles including granite and marble tiles. It cement slurries are used as corrosion inhibitor on exposed reinforcements and on bridge girders to protect them from attack of chlorides and sulphates. It is used in making water proof slurries for repair of old Water proofing works & water proof mortars for new water proofing works. It is used in arresting leakages from water retaining structures whether through pipe concrete junctions or from masonry pointing. It is used in arresting leakages from overhead as well as under ground potable water tanks. Advantages: Ÿ It is a very strong bond ingagent for mortars and concrete to bind with old concrete. stone, steel, brick etc. Ÿ It is a strong corrosion inhibitor. It prevents entry of chloride and sulphate ions into the cementitious structure. Ÿ It is a superior water proofing product. Ÿ It is an excellent adhesive for tiles, stones marble and granite lies. Ÿ It is very easy to use and is non toxic. It poses no environmental hazards. Ÿ It increase the compressive tensile and flexural strength of concrete and mortars. Ÿ It makes mortars non shrink, strong and dust proof. Ÿ Where no remedy exists for saltpeter action on walls It modified mortar solves the problem with ease. Ÿ It is successfully used as a primer to brick bat coba systems on terraces. Ÿ It is economical than many similar products yet gives multi fold advantages

17