BUILD A SOLID START CONCRETE MASONRY PRODUCTS

Transcription

1 BUID A SOID START CONCRETE MASONRY PRODUCTS

2 SPECIFICATIONS A. Concrete Masonry Units manufactured by General Shale Products C s, comply with the requirments of the following specificiations: ASTM C90 (atest Revision) - Specification for oad-bearing Concrete Masonry Units. Products are available in light weight, medium weight, and normal weight densities. The net area compressive strength of all products is in excess of 2000 psi. ASTM C129 (atest Revision) - Specification for Non oad-bearing Concrete Masonry Units. B. AGGREGATES: The aggregates from which General Shale Concrete Masonry Units are made comply with the requirements of the following specifications: ASTM C331 (atest Revision) - Standard Specification for ightweight Aggregate for Concrete Masonry Units. ASTM C33 (atest Revision) - Specification for Concrete Aggregates. C. Test Methods: Concrete Masonry Units are tested in accordance with the tests outlined in the following standard methods: ASTM C140 (atest Revision) - Standard Methods of Sampling and Testing Concrete Masonry Units. ASTM C426 (atest Revision) - Standard Method for Drying Shrinkage of Concrete Block. (e.g. nominal x x = actual 7 5 /8 " x 7 5 /8 " x 15 5 /8 ")

3 FIRE RATINGS Concrete masonry units as manufactured by General Shale Products C have Fire-Resistance ratings as listed below. These ratings are based on equivalent thickness as required by the International Building Code (IBC) 2015 Edition. Dimensions Block Equivalent Thickness Fire Resistance Rating (ours) x x Bond Beam Concrete Filled in. 4 x x Corner Breaker Sash 6.46 in. 4 x x Stretcher (Cinder or imestone Aggregate) 5.64 in. 3.5 x x Stretcher (Expanded Clay or Shale Aggregate) 5.64 in. 4 Stretcher Cores filled w/ vermiculate, perlite, x x expanded shale, clay, slate or slag aggregate in. 4 x x Bond Beam Concrete Filled 7.63 in. 4 x x Stretcher (Expanded Clay or Shale Aggregate) 3.91 in x x Stretcher (Cinder or imestone Aggregate) 3.91 in x x Special Production 53% Solid 4.04 in. 2 x x Stretcher Cores filled w/ vermiculate, perlite, expanded shale, clay, concrete, slate or slag 7.63 in. 4 aggregate x x Bond Beam Concrete Filled 5.63 in. 3.5 x x Stretcher (Cinder or imestone Aggregate) 3.16 in x x Stretcher (Expanded Clay or Shale Aggregate) 3.16 in x x Solid 5.63 in. 3.5 x x Solid 3.63 in. 1.5 x x Stretcher (Cinder or imestone Aggregate) 2.73 in. 1 x x Stretcher (Expanded Clay or Shale Aggregate) 2.73 in. 1 CO-BRO

4 FI QUANTITIES (for Grout or Insulation) all Construction Cubic Measure of Void Volume Per 100 Square Feet of all Surface Area Item Cubic Feet (CF) Cubic Yards (CY) Stretchers Corner Breakers :1 Blend of Stretchers and Corner Breakers Retaining all Block Stretchers Stretchers Corner Breakers :1 Blend of Stretchers and Corner Breakers Retaining all Block Stretchers Bond Beams & intels Cubic Measure of Void Volume Per 100 ineal (Running) Feet of Beam or intel Item Cubic Feet (CF) Cubic Yards (CY) Bond Beam Block with Center eb Bond Beam Block without Center eb Bond Beam Block with Center eb Bond Beam Block without Center eb U-intel Block Bond Beam Block NOTE: Quantities represent calculated volumes. No allowance has been included for waste, settlement, workmanship or other construction factors; standard pour-in insulation 4 cubic-feet per bag.

5 OADS FOR PRECAST INTES (Maximum) Masonry Opening Clear Span - (ft) I (in) intel ength - (ft) (in) Reinforcing Steel (Top and Bottom) Allowable oad (lbs/linear ft) intel (3-5 /8 " x 7-5 /8 ") Allowable oad (lbs/linear ft) intel (5-5 /8 " x 7-5 /8 ") Allowable oad (lbs/linear ft) intel (7-5 /8 " x 7-5 /8 ") 1'- 2'- 32" 2'- 3'- 4'-0" 4'- 5'- 2 40" 4 5 3'- 6 4'- 5'- 6'-0" 6' " 80" 6'-0" 6'- 7'- 8'-0" 8'- 72" 80" 8 9 7' '-0" 8'- 9'- 10'-0" 120" 9'- 10'-0" 10' " 12 10'- 11'- 12'-0" #3 #3 #3 #3 #3 #4 #4 #4 #4 #4 #4 #4 #4 # intel capacaites are based on NCMA TEK Note 17-2 Design loads based on maximum allowable deflection =./600 < 0.3 inches Reinforcing Steel grade 60, Fy = 60 ksi Masonry design strength f c = 2500 psi intels have one bar top and bottom and intels have two bars top and bottom NOTE: This data is provided for information only and is not intended to replace engineering where required. General Shale assumes no responsibility for use of these tables. CO-BRO

6 STANDARD MASONRY UNITS alf igh Square End Square End Scored Corner Breaker Sash Scored Regular (e.g. nominal x x = actual 7 5 /8 " x 7 5 /8 " x 15 5 /8 ")

7 STANDARD MASONRY UNITS Bond Beam Bond Beam eader Beam intel Bond Beam Open & Solid 8 Bond Beam Open & Solid 12 (e.g. nominal x x = actual 7 5 /8 " x 7 5 /8 " x 15 5 /8 ") CO-BRO

8 STANDARD MASONRY UNITS Flue with Thimble Opening Flue Block 17" 17" 17" 17" alf Block 8 alf Block 12 FA Block Block intel 32" 14 (e.g. nominal x x = actual 7 5 /8 " x 7 5 /8 " x 15 5 /8 ")

9 STANDARD MASONRY UNITS Double Bull Nose Face Double Bull Nose End Pilaster Block Jamb Block 19" alf Jamb Block (e.g. nominal x x = actual 7 5 /8 " x 7 5 /8 " x 15 5 /8 ") CO-BRO

10 STANDARD MASONRY UNITS 75% Solid Regular Single Bullnose 12 Return Corner Retaining all Unit Retaining all Unit 12 (e.g. nominal x x = actual 7 5 /8 " x 7 5 /8 " x 15 5 /8 ")

11 STANDARD MASONRY UNITS Cinder Brick 2 1 /4 "* *Dimensions are actual Solid 1 5 /8 "* *Dimensions are actual 2 1 /4 "* Single Scored (e.g. nominal x x = actual 7 5 /8 " x 7 5 /8 " x 15 5 /8 ") CO-BRO

12 SPIT-FACED MASONRY UNITS Split-Faced Square End Split-Faced Corner Split-Faced Scored Corner Split-Faced Split-Faced Scored (e.g. nominal x x = actual 7 5 /8 " x 7 5 /8 " x 15 5 /8 ")

13 SPIT-FACED MASONRY UNITS Split-Faced End Split-Faced End Split-Faced Split-Faced End Sash Split-Faced Scored Split-Faced Bond Beam Open & Solid 8 Split-Faced Bond Beam Open & Solid 12 (e.g. nominal x x = actual 7 5 /8 " x 7 5 /8 " x 15 5 /8 ") CO-BRO

14 VERSA-OK 2 2 D 1 D 1 VERSA-OK Standard Retaining all System D VERSA-OK Square Foot D 2 2 D 1 D 1 VERSA-OK A-Cap VERSA-OK B-Cap 3 5 /8 " D 3 5 /8 " D 2 2 D D 1 1 VERSA-OK Cobble 1 2 D VERSA-OK Accent 1 2 D All dimensions for VERSA-OK units are actual.

15 GEOSTONE 2 2 D 1 D 1 GEOSTONE Standard Retaining all System " D GEOSTONE alf-igh " D 2 D 1 GEOSTONE Universal Cap Block D All dimensions for GEOSTONE units are actual. CO-BRO

16 REGENCY STONE (Concrete Veneer) Regency Stone Concrete Veneer Standard Production Sizes Special Production Sizes (e.g. nominal x x = actual 7 5 /8 " x 7 5 /8 " x 15 5 /8 ")

17 CO-BRO

18 CO-BRO Bristol ighway Johnson City, TN (800) generalshale.com