Richmond, VA 800/ Rome, NY 800/ Salt Lake City, UT 800/ San Antonio, TX 800/ COMMERCIAL / INDUSTRIAL PRICING

Transcription

1 TABLE OF CONTENTS A. Panels 1. PBR CP PBU CP PBA CP PBC CP PBD CP Panel CP Retro-R CP-8-9 B. Structural 1. Cees and Zees CP Channels CP Angles and Eave Struts CP Custom Structural Shapes CP LiteFrame, Furring Zee, Offset Cleat and Strapping CP-15 C. Accessories 1. Light Transmitting Panels CP Ventilators CP Fasteners CP Ridge Caps CP Rubber Roof Jacks, Retro-Fit Rubber Roof Jacks and Metal Roof Jacks CP Closure Strips CP Windows CP Doors CP Sealant CP CIP Base CP Paint CP Drill Bits CP Magnetic Socket CP Impact Socket CP Screw Gun CP Pop Riveter CP Blanket Insulation, Vinyl Patch Tape and Double Faced Tape CP Reflective Insulation, Strand and Flo-Loc Grips CP Eye Bolts and Washers CP Machine Bolts and Purlin Clip CP Louvers CP Slide Door Hardware CP Flat Sheets and Coils CP D. Trim CP PRODUCT INFORMATION E. Commercial/Industrial Technical/Product Information See Manual F. PBR & PBU Panels/Technical/Product Information See Manual G. NuRoof Retrofit Systems Design/Installation Information See Manual Copyright NCI Group, Inc. /All Rights Reserved/ Descriptions and specifications contained herein were in effect at the time this publication was approved for printing. In a continuing effort to refine and improve products, MBCI reserves the right to discontinue products at any time or change specifications and/or designs without incurring obligation. To insure you have the latest information available, please inquire or visit our Web Site at Application details are for illustration purposes only and may not be appropriate for all environmental conditions, building designs, or panel profiles. Projects should be engineered to conform to applicable building codes, regulations and accepted industry practices. Insulation is not shown in these details for clarity. If there is a conflict between this manual and the erection drawings, the erection drawings will take precedence. SUBJECT TO CHANGE WITHOUT NOTICE SEE FOR CURRENT INFORMATION EFFECTIVE NOVEMBER 7, 2011 CP-1

2 12" Houston: 877/ " 1¹ ₄" 36" 6" PBR Panel 12" 36" PBU Panel 1¹ ₈" PBA Panel Number of Square Feet Per Panel 0" 1" 2" 3" 5" 6" 7" 8" 9" 10" 11" 1 FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT CP-2 SUBJECT TO CHANGE WITHOUT NOTICE SEE FOR CURRENT INFORMATION EFFECTIVE NOVEMBER 7, 2011

3 12" 36" 1¹ ₄" 6" 36" PBR Panel 12" 36" PBU Panel 1¹ ₈" PBA Panel PRICE PER SQUARE NET YIELD WEIGHT OVER GAUGE GIRTH (psi) PER SQ. FINISH " 80,000 70# Galvalume Plus 29 36" 80,000 70# Signature 200 * 26 36" 80,000 89# Galvalume Plus 26 36" 80,000 89# Signature 200 * 26 36" 80,000 94# Galvanized 26 36" 80,000 89# Signature 300 * 24 36" 50, # Galvalume Plus 24 36" 50, # Signature 200 * 150 Square Minimum Order 22 36" 50, # Galvalume Plus 22 36" 50, # Signature 200 * 200 Square Minimum Order.02 Alum 36" 18,000 35# Signature White only Perforated only * See Commercial / Industrial Color Chart for available colors Signature is a registered trademark of NCI Group, Inc. Galvalume Plus is a registered and protected trademark of BIEC International, Inc. The Galvalume Plus coating is subject to variances in spangle from coil to coil which may result in noticeable shade variation in installed panels.the Galvalume Plus coating is also subject to differential weathering after panel installation. Panels may appear to be different shades due to this weathering characteristic. If a consistent appearance is required, MBCI recommends that pre-painted panels be used in lieu of Galvalume Plus. Shade variation in panels manufactured from Galvalume Plus coated material do not diminish the structural integrity of the product. These shade variations should be anticipated and are not a cause for rejection. Consult the MBCI COMMERCIAL/INDUSTRIAL OR PBR / PBU TECHNICAL/ERECTION MANUAL for proper product application, design details and other product information. PANEL : 1. All PBR, PBU and PBA panel pricing is based on a 38¹ ₄" sheet width (see chart on opposite page). 2. Add $7.55 per square for embossing. 3. Add $1.05 per sheet for lengths 4'-0" and under. 4. Add $32.40 set-up charge for reverse run PBR or PBU panels (upside down). 5. Perforated aluminum is ¹ ₈" round on.32 staggered centers. Approximately 13.5% open area. Any other color, gauge or perforation pattern - Please inquire. PACKAGING COST: 1. Maximum 3000 pounds or 75 panels per bundle. 2. Block and band only $ Block and band, waterproof paper wrap $1.40/linear foot 4. Block and band, waster sheet top only $1.60/linear foot 5. Block and band, waster sheet top and bottom $2.80/linear foot 6. LTL Package - block and band, waster sheet top and bottom, angle board sides and ends $3.50/linear foot 7. Export Package - block and band, waster sheet top and bottom, steel and wood boxed special Order Only DELIVERY: and 26 gauge - Stocked Signature 200 colors (see color chart) approximately 3 Working Days and 24 gauge - Galvalume Plus and Signature 200 White Approximately 3 Working Days and 24 gauge - Signature 200 colors approximately 14 Working Days gauge - Signature 300 colors (see color chart) approximately 14 Working Days NOTES: 1. PBA panel is striated as a standard. 2. The aesthetic results of installing PBA panels over blanket insulation can have varying degree of success depending upon the insulation thickness and density, as well as, the skill of and techniques used by the installer. However, use of PBA panels over blanket insulation thicker than 3 usually results in one or more of the following: (1) Panels will not hold 36 module, (2) Uniform panel side laps will be extremely difficult to maintain and (3) Panels are prone to exhibit oil canning. 3. Edge of panel in contact with concrete sheeting notch will result in excessive edge creep. Panel corrosion due to contact with concrete or any masonry product is excluded from Panel Warranty. 4. All perforated material comes with a light oil coating. Panels should be wiped clean before installing. IMPORTANT NOTICE TO INSTALLER/CUSTOMER: Material should be inspected carefully prior to installation for defects including excessive oil canning. Installation of material constitutes acceptance. SUBJECT TO CHANGE WITHOUT NOTICE SEE FOR CURRENT INFORMATION EFFECTIVE NOVEMBER 7, 2011 CP-3

4 Houston: 877/ " 32" ⁷ ₈" 32" 2.67" ⁵ ₈" PBC Panel Number of Square Feet Per Panel PBD Panel 0" 1" 2" 3" 5" 6" 7" 8" 9" 10" 11" 1 FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT CP-4 SUBJECT TO CHANGE WITHOUT NOTICE SEE FOR CURRENT INFORMATION EFFECTIVE NOVEMBER 7, 2011

5 2.67" 32" ⁷ ₈" 32" 2.67" ⁵ ₈" PBC Panel PBD Panel PRICE PER SQUARE NET YIELD WEIGHT OVER GAUGE GIRTH (psi) PER SQ. FINISH " 80,000 78# Galvalume Plus 29 32" 80,000 78# Signature 200 * 29 32" 80,000 83# Galvanized PLEASE INQUIRE 26 32" 80, # Galvalume Plus 26 32" 80, # Signature 200 * 26 32" 80, # Galvanized 26 32" 80, # Signature 300 * 24 32" 50, # Galvalume Plus 24 32" 50, # Signature 200 * 150 Square Minimum Order 22 32" 50, # Galvalume Plus 22 32" 50, # Signature 200 * 200 Square Minimum Order.02 Alum 32" 18,000 40# Signature White only Perforated only * See Commercial / Industrial Color Chart for available colors "PBC" Panel not available Signature is a registered trademark of NCI Group, Inc. Galvalume Plus is a registered and protected trademark of BIEC International, Inc. The Galvalume Plus coating is subject to variances in spangle from coil to coil which may result in noticeable shade variation in installed panels.the Galvalume Plus coating is also subject to differential weathering after panel installation. Panels may appear to be different shades due to this weathering characteristic. If a consistent appearance is required, MBCI recommends that pre-painted panels be used in lieu of Galvalume Plus. Shade variation in panels manufactured from Galvalume Plus coated material do not diminish the structural integrity of the product. These shade variations should be anticipated and are not a cause for rejection. Consult the MBCI COMMERCIAL/INDUSTRIAL OR PBR / PBU TECHNICAL/ERECTION MANUAL for proper product application, design details and other product information. PANEL : 1. All PBC and PBD panel pricing is based on a 3 sheet width (see chart on opposite page). 2. Add $7.55 per square for embossing. 3. Add $1.05 per sheet for lengths 4'-0" and under. 4. Perforated aluminum is ¹ ₈" round on.32 staggered centers. Approximately 13.5% open area. Any other color, gauge or perforation pattern - Please inquire. PACKAGING COST: 1. Maximum 3000 pounds or 75 panels per bundle. 2. Block and band only $ Block and band, waterproof paper wrap $1.40/linear foot 4. Block and band, waster sheet top only $1.60/linear foot 5. Block and band, waster sheet top and bottom $2.80/linear foot 6. LTL Package - block and band, waster sheet top and bottom, angle board sides and ends $3.50/linear foot 7. Export Package - block and band, waster sheet top and bottom, steel and wood boxed special Order Only DELIVERY: and 26 gauge - Stocked Signature 200 colors (see color chart) approximately 3 Working Days and 24 gauge - Galvalume Plus and Signature 200 White Approximately 3 Working Days and 24 gauge - Signature 200 colors approximately 14 Working Days gauge - Signature 300 colors (see color chart) approximately 21 Working Days NOTES: 1. Edge of panel in contact with concrete sheeting notch will result in excessive edge creep. Panel corrosion due to contact with concrete or any masonry product is excluded from Panel Warranty. 2. All perforated material comes with a light oil coating. Panels should be wiped clean before installing. IMPORTANT NOTICE TO INSTALLER/CUSTOMER: Material should be inspected carefully prior to installation for defects including excessive oil canning. Installation of material constitutes acceptance. SUBJECT TO CHANGE WITHOUT NOTICE SEE FOR CURRENT INFORMATION EFFECTIVE NOVEMBER 7, 2011 CP-5

6 .63" Houston: 877/ " 7.2 Panel 36" 2.146" 1 ¹ ₂" 2.146" Number of Square Feet Per Panel 45 (TYP) 0" 1" 2" 3" 5" 6" 7" 8" 9" 10" 11" 1 FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT CP-6 SUBJECT TO CHANGE WITHOUT NOTICE SEE FOR CURRENT INFORMATION EFFECTIVE NOVEMBER 7, 2011

7 .63" 7.2 Panel 36" 7.200" 2.146" 45 (TYP) 1 ¹ ₂" 2.146" PRICE PER SQUARE NET YIELD WEIGHT OVER GAUGE GIRTH (psi) PER SQ. FINISH " 80,000 71# Galvalume Plus 29 36" 80,000 71# Signature 200 * 150 Square Minimum Order 26 36" 80,000 96# Galvalume Plus 26 36" 80,000 96# Signature 200 * 150 Square Minimum Order 24 36" 50, # Galvalume Plus 24 36" 50, # Signature 200 * 150 Square Minimum Order 24 36" 50, # Signature 300 * 150 Square Minimum Order 22 36" 50, # Galvalume Plus 22 36" 50, # Signature 200 * 200 Square Minimum Order 22 36" 50, # Signature 300 * 200 Square Minimum Order * See Commercial / Industrial Color Chart for available colors Signature is a registered trademark of NCI Group, Inc. Galvalume Plus is a registered and protected trademark of BIEC International, Inc. The Galvalume Plus coating is subject to variances in spangle from coil to coil which may result in noticeable shade variation in installed panels.the Galvalume Plus coating is also subject to differential weathering after panel installation. Panels may appear to be different shades due to this weathering characteristic. If a consistent appearance is required, MBCI recommends that pre-painted panels be used in lieu of Galvalume Plus. Shade variation in panels manufactured from Galvalume Plus coated material do not diminish the structural integrity of the product. These shade variations should be anticipated and are not a cause for rejection. Consult the MBCI COMMERCIAL/INDUSTRIAL OR PBR / PBU TECHNICAL/ERECTION MANUAL for proper product application, design details and other product information. PANEL : 1. All 7.2 panel pricing is based on a 39¹ ₈" sheet width (see chart on opposite page). 2. Add $7.55 per square for embossing. 3. Add $1.05 per sheet for lengths 4'-0" and under. PACKAGING COST: 1. Maximum 3000 pounds or 75 panels per bundle. 2. Block and band only $ Block and band, waterproof paper wrap $1.40/linear foot 4. Block and band, waster sheet top only $1.60/linear foot 5. Block and band, waster sheet top and bottom $2.80/linear foot 6. LTL Package - block and band, waster sheet top and bottom, angle board sides and ends $3.50/linear foot 7. Export Package - block and band, waster sheet top and bottom, steel and wood boxed special Order Only DELIVERY: gauge - stocked Signature 200 colors (see color chart) approximately 14 Working Days 2. 26, 24 and 22 gauge - (see color chart) please Inquire NOTES: 1. Edge of panel in contact with concrete sheeting notch will result in excessive edge creep. Panel corrosion due to contact with concrete or any masonry product is excluded from Panel Warranty. 2. All perforated material comes with a light oil coating. Panels should be wiped clean before installing. IMPORTANT NOTICE TO INSTALLER/CUSTOMER: Material should be inspected carefully prior to installation for defects including excessive oil canning. Installation of material constitutes acceptance. SUBJECT TO CHANGE WITHOUT NOTICE SEE FOR CURRENT INFORMATION EFFECTIVE NOVEMBER 7, 2011 CP-7

8 Retro-R Panel 36" 12" 2" 1¹ ₁₆" 1¹ ₂" 2¹ ₈" Number of Square Feet Per Panel 0" 1" 2" 3" 5" 6" 7" 8" 9" 10" 11" 1 FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT CP-8 SUBJECT TO CHANGE WITHOUT NOTICE SEE FOR CURRENT INFORMATION EFFECTIVE NOVEMBER 7, 2011

9 Retro-R Panel 36" 12" 2" 1¹ ₁₆" 1¹ ₂" 2¹ ₈" PRICE PER SQUARE NET YIELD WEIGHT OVER GAUGE GIRTH (psi) PER SQ. FINISH " 80,000 64# Galvalume Plus 29 36" 80,000 64# Signature 200 * * See Residential Color Chart, Slimline Panel, for available colors Signature is a registered trademark of NCI Group, Inc. Galvalume Plus is a registered and protected trademark of BIEC International, Inc. The Galvalume Plus coating is subject to variances in spangle from coil to coil which may result in noticeable shade variation in installed panels.the Galvalume Plus coating is also subject to differential weathering after panel installation. Panels may appear to be different shades due to this weathering characteristic. If a consistent appearance is required, MBCI recommends that pre-painted panels be used in lieu of Galvalume Plus. Shade variation in panels manufactured from Galvalume Plus coated material do not diminish the structural integrity of the product. These shade variations should be anticipated and are not a cause for rejection. PANEL : 1. The Retro-R panel pricing is based on 38¹ ₂" sheet width (see chart on opposite page). 2. Add 1.05 per sheet for lengths 4'-0" and under. 3. Pricing includes the closed cell foam vapor barrier. PACKAGING COST: 1. Maximum 3000 pounds or 75 panels per bundle. 2. Blocked and banded with waster sheet top and bottom $2.80/linear foot 3. LTL Package - block and band, waster sheet top and bottom, wooden sides and ends $3.50/linear foot 4. Export packaging per quote only. DELIVERY: gauge Signature 200 Stocked colors. (see Residential Color Chart, Slimline Panel) Approximately 15 Working Days gauge Signature 300 colors (contact MBCI for selection) approximately 15 Working Days gauge (Galvalume Plus & Signature 200, 150 Square min.) please Inquire NOTES: 1. Maximum panel length is 40'-0". 2. The ¹ ₄-14 x ⁷ ₈" type Long Life Lap Tek (Fastener #4) screws supplied by MBCI are the only approved fasteners for installation of the Retro-R panel. Any deviation from this procedure will release MBCI from any liability. 3. Existing panels to which the Retro-R panels will be attached, must be 36 wide and have major ribs 1¹ ₄ deep. 4. Edge of panel in contact with concrete sheeting notch will result in excessive edge creep. Panel corrosion due to contact with concrete or any masonry product is excluded from Panel Warranty. IMPORTANT NOTICE TO INSTALLER/CUSTOMER: Material should be inspected carefully prior to installation for defects including excessive oil canning. Installation of material constitutes acceptance. SUBJECT TO CHANGE WITHOUT NOTICE SEE FOR CURRENT INFORMATION EFFECTIVE NOVEMBER 7, 2011 CP-9

10 ITEM DESCRIPTION PRICE PER 100 LINEAR FEET CEE OR ZEE NOMINAL ACTUAL WEIGHT OVER ADD FOR SIZE SIZE* GAUGE FINISH PER LF GALV. 4 x 2 N/A 16 Red Oxide 1.75# 4 x 2 N/A 14 Red Oxide 2.10# 4 x 2¹ ₂ 4 x 2¹ ₈ x 2³ ₈ 16 Red Oxide 1.95# 4 x 2¹ ₂ 4 x 2¹ ₈ x 2³ ₈ 14 Red Oxide 2.33# 5 x 2¹ ₂ 5 x 2¹ ₈ x 2³ ₈ 16 Red Oxide 2.15# 5 x 2¹ ₂ 5 x 2¹ ₈ x 2³ ₈ 14 Red Oxide 2.57# 6 x 2¹ ₂ 6 x 2¹ ₈ x 2³ ₈ 16 Red Oxide 2.34# Cee 6 x 2¹ ₂ 6 x 2¹ ₈ x 2³ ₈ 14 Red Oxide 2.80# 7 x 2¹ ₂ 7 x 2¹ ₈ x 2³ ₈ 16 Red Oxide 2.54# 7 x 2¹ ₂ 7 x 2¹ ₈ x 2³ ₈ 14 Red Oxide 3.04# 7 x 3 7 x 2⁵ ₈ x 2⁷ ₈ 14 Red Oxide 3.27# 7 x 3 7 x 2⁵ ₈ x 2⁷ ₈ 12 Red Oxide 4.88# 8 x 2¹ ₂ 8 x 2¹ ₈ x 2³ ₈ 16 Red Oxide 2.73# 8 x 2¹ ₂ 8 x 2¹ ₈ x 2³ ₈ 14 Red Oxide 3.27# 8 x 2¹ ₂ 8 x 2¹ ₈ x 2³ ₈ 13 Red Oxide 3.95# N/A 8 x 2¹ ₂ 8 x 2¹ ₈ x 2³ ₈ 12 Red Oxide 4.88# 8 x 3 8 x 2⁵ ₈ x 2⁷ ₈ 16 Red Oxide 2.93# 8 x 3 8 x 2⁵ ₈ x 2⁷ ₈ 14 Red Oxide 3.50# Zee 8 x 3 8 x 2⁵ ₈ x 2⁷ ₈ 12 Red Oxide 5.23# 8 x 3¹ ₂ 8 x 3¹ ₈ x 3³ ₈ 14 Red Oxide 3.74# 8 x 3¹ ₂ 8 x 3¹ ₈ x 3³ ₈ 13 Red Oxide 4.52# N/A 8 x 3¹ ₂ 8 x 3¹ ₈ x 3³ ₈ 12 Red Oxide 5.58# 9 x 2¹ ₂ 9 x 2¹ ₈ x 2³ ₈ 16 Red Oxide 2.93# 9 x 2¹ ₂ 9 x 2¹ ₈ x 2³ ₈ 14 Red Oxide 3.50# 9 x 2¹ ₂ 9 x 2¹ ₈ x 2³ ₈ 12 Red Oxide 5.23# 9 x 3 9 x 2⁵ ₈ x 2⁷ ₈ 14 Red Oxide 3.74# 9 x 3 9 x 2⁵ ₈ x 2⁷ ₈ 12 Red Oxide 5.58# 10 x 2¹ ₂ 10 x 2¹ ₈ x 2³ ₈ 14 Red Oxide 3.74# 10 x 2¹ ₂ 10 x 2¹ ₈ x 2³ ₈ 12 Red Oxide 5.58# 10 x 3 10 x 2⁵ ₈ x 2⁷ ₈ 14 Red Oxide 3.97# 10 x 3 10 x 2⁵ ₈ x 2⁷ ₈ 12 Red Oxide 5.93# 10 x 3¹ ₂ 10 x 3¹ ₈ x 3³ ₈ 14 Red Oxide 4.21# 10 x 3¹ ₂ 10 x 3¹ ₈ x 3³ ₈ 12 Red Oxide 6.28# 11 x 2¹ ₂ 11 x 2¹ ₈ x 2³ ₈ 14 Red Oxide 3.97# 11 x 2¹ ₂ 11 x 2¹ ₈ x 2³ ₈ 12 Red Oxide 5.93# 11 x 3¹ ₂ 11 x 3¹ ₈ x 3³ ₈ 14 Red Oxide 4.44# 11 x 3¹ ₂ 11 x 3¹ ₈ x 3³ ₈ 12 Red Oxide 6.63# 12 x 2¹ ₂ 12 x 2¹ ₈ x 2³ ₈ 14 Red Oxide 4.21# 12 x 2¹ ₂ 12 x 2¹ ₈ x 2³ ₈ 12 Red Oxide 6.28# 12 x 3 12 x 2⁵ ₈ x 2⁷ ₈ 14 Red Oxide 4.44# 12 x 3 12 x 2⁵ ₈ x 2⁷ ₈ 12 Red Oxide 6.63# 12 x 3¹ ₂ 12 x 3¹ ₈ x 3³ ₈ 14 Red Oxide 4.68# 12 x 3¹ ₂ 12 x 3¹ ₈ x 3³ ₈ 12 Red Oxide 6.98# * Actual size does not apply to cees. It refers to unequal flange zees only. Consult the MBCI technical manuals for proper product application, design details and other product information. Consult the MBCI COMMERCIAL/INDUSTRIAL TECHNICAL/PRODUCT INFORMATION MANUAL for proper product application, design details and other product information. CP-10 SUBJECT TO CHANGE WITHOUT NOTICE SEE FOR CURRENT INFORMATION EFFECTIVE NOVEMBER 7, 2011

11 ITEM DESCRIPTION PRICE PER 100 LINEAR FEET CEE ONLY NOMINAL ACTUAL WEIGHT OVER ADD FOR SIZE SIZE* GAUGE FINISH PER LF GALV. 6 x 3 N/A 16 Red Oxide 2.54# 6 x 3 N/A 14 Red Oxide 3.04# 6 x 3¹ ₂ N/A 14 Red Oxide 3.27# 6 x 3¹ ₂ N/A 12 Red Oxide 4.88# 6 x 4 N/A 14 Red Oxide 3.50# 6 x 4 N/A 12 Red Oxide 5.23# 8 x 4 N/A 14 Red Oxide 3.97# Cee 8 x 4 N/A 12 Red Oxide 5.93# 10 x 4 N/A 14 Red Oxide 4.44# 10 x 4 N/A 12 Red Oxide 6.63# 11 x 3 N/A 14 Red Oxide 4.21# 11 x 3 N/A 12 Red Oxide 6.28# 12 x 4 N/A 14 Red Oxide 4.91# 12 x 4 N/A 12 Red Oxide 7.33# ZEE ONLY 3¹ ₂ x 1¹ ₂ N/A 16 Red Oxide 1.56# 3¹ ₂ x 1¹ ₂ N/A 14 Red Oxide 1.86# 4 x 3 4 x 2⁵ ₈ x 2⁷ ₈ 16 Red Oxide 2.15# 4 x 3 4 x 2⁵ ₈ x 2⁷ ₈ 14 Red Oxide 2.57# 4 x 3¹ ₂ 4 x 3¹ ₈ x 3³ ₈ 16 Red Oxide 2.34# 4 x 3¹ ₂ 4 x 3¹ ₈ x 3³ ₈ 14 Red Oxide 2.80# 5 x 3 5 x 2⁵ ₈ x 2⁷ ₈ 16 Red Oxide 2.34# 5 x 3 5 x 2⁵ ₈ x 2⁷ ₈ 14 Red Oxide 2.80# 5 x 3¹ ₂ 5 x 3¹ ₈ x 3³ ₈ 16 Red Oxide 2.54# Zee 5 x 3¹ ₂ 5 x 3¹ ₈ x 3³ ₈ 14 Red Oxide 3.04# 7 x 3¹ ₂ 7 x 3¹ ₈ x 3³ ₈ 16 Red Oxide 2.93# 7 x 3¹ ₂ 7 x 3¹ ₈ x 3³ ₈ 14 Red Oxide 3.50# 7 x 3¹ ₂ 7 x 3¹ ₈ x 3³ ₈ 12 Red Oxide 5.23# 9 x 3¹ ₂ 9 x 3¹ ₈ x 3³ ₈ 14 Red Oxide 3.97# 9 x 3¹ ₂ 9 x 3¹ ₈ x 3³ ₈ 12 Red Oxide 5.93# * Actual size does not apply to cees. It refers to unequal flange zees only. Consult the MBCI technical manuals for proper product application, design details and other product information. Consult the MBCI COMMERCIAL/INDUSTRIAL TECHNICAL/PRODUCT INFORMATION MANUAL for proper product application, design details and other product information. PUNCHING PATTERNS (SPECIFY BY PATTERN LETTER): Pattern A: Common Web (for Simple Span, Short Lap, Long Lap, 3' Offset and Max Lap) $1.05 per zee or cee Pattern B: Common Web (all laps available in Pattern A plus 5' Offset and Super Lap) $1.25 per zee or cee Pattern D: Common Flange (for Simple Span, Short Lap, Long Lap, 3' Offset and Max Lap) $1.25 per zee or cee Pattern E: Common Flange (all laps available in Pattern D plus 5' Offset and Super Lap) $1.55 per zee or cee Pattern G: Common End (one set of holes 1 from end of purlin) $.60 per zee or cee SPECIAL PUNCHING: $2.65 per zee or cee NOTES: 1. All common patterns have the first set of holes 1 from the end of the purlin. 2. Length tolerance is ± ¹ ₄". 3. For pricing, round lengths up to the nearest 3" increment - Parts shorter than 5'-0" are priced as minimum 5'-0" length. SUBJECT TO CHANGE WITHOUT NOTICE SEE FOR CURRENT INFORMATION EFFECTIVE NOVEMBER 7, 2011 CP-11

12 ITEM DESCRIPTION PRICE PER EACH CHANNEL WEIGHT OVER SIZE GAUGE FINISH EACH LENGTH x 2 Channel = 4¹ ₈ x 2 16 Red Oxide 31.13# 20'-0" 4¹ ₈ x 2 Channel 4¹ ₈ x 2 16 Red Oxide 38.92# 25'-0" Girth = 7¹⁵ ₁₆" 4¹ ₈ x 2 14 Red Oxide 37.25# 20'-0" 4¹ ₈ x 2 14 Red Oxide 46.56# 25'-0" 4¹ ₈ x 2 16 Galvanized 32.24# 20'-0" 4¹ ₈ x 2 16 Galvanized 40.31# 25'-0" 4¹ ₈ x 2 14 Galvanized 38.36# 20'-0" 4¹ ₈ x 2 14 Galvanized 47.94# 25'-0" 6 x 2 Channel = 6¹ ₈ x 2 16 Red Oxide 38.98# 20'-0" 6¹ ₈ x 2 Channel 6¹ ₈ x 2 16 Red Oxide 48.72# 25'-0" Girth = 9¹⁵ ₁₆" 6¹ ₈ x 2 14 Red Oxide 46.63# 20'-0" 6¹ ₈ x 2 14 Red Oxide 58.29# 25'-0" 6¹ ₈ x 2 12 Red Oxide 69.60# 20'-0" 6¹ ₈ x 2 12 Red Oxide 87.00# 25'-0" 6¹ ₈ x 2 16 Galvanized 40.37# 20'-0" 6¹ ₈ x 2 16 Galvanized 50.46# 25'-0" 6¹ ₈ x 2 14 Galvanized 48.02# 20'-0" 6¹ ₈ x 2 14 Galvanized 60.03# 25'-0" 6¹ ₈ x 2 12 Galvanized 70.99# 20'-0" 6¹ ₈ x 2 12 Galvanized 88.74# 25'-0" 8 x 2 Channel = 8¹ ₈ x 2 16 Red Oxide 46.82# 20'-0" 8¹ ₈ x 2 Channel 8¹ ₈ x 2 16 Red Oxide 58.53# 25'-0" Girth = 11¹⁵ ₁₆" 8¹ ₈ x 2 14 Red Oxide 56.02# 20'-0" 8¹ ₈ x 2 14 Red Oxide 70.02# 25'-0" 8¹ ₈ x 2 12 Red Oxide 83.61# 20'-0" 8¹ ₈ x 2 12 Red Oxide # 25'-0" 8¹ ₈ x 2 16 Galvanized 48.49# 20'-0" 8¹ ₈ x 2 16 Galvanized 60.62# 25'-0" 8¹ ₈ x 2 14 Galvanized 57.68# 20'-0" 8¹ ₈ x 2 14 Galvanized 72.11# 25'-0" 8¹ ₈ x 2 12 Galvanized 85.28# 20'-0" 8¹ ₈ x 2 12 Galvanized # 25'-0" 10 x 2 Channel = 10¹ ₈ x 2 16 Red Oxide 54.67# 20'-0" 10¹ ₈ x 2 Channel 10¹ ₈ x 2 16 Red Oxide 68.33# 25'-0" Girth = 13¹⁵ ₁₆" 10¹ ₈ x 2 14 Red Oxide 65.40# 20'-0" 10¹ ₈ x 2 14 Red Oxide 81.76# 25'-0" 10¹ ₈ x 2 12 Red Oxide 97.62# 20'-0" 10¹ ₈ x 2 12 Red Oxide # 25'-0" 10¹ ₈ x 2 16 Galvanized 56.62# 20'-0" 10¹ ₈ x 2 16 Galvanized 70.77# 25'-0" 10¹ ₈ x 2 14 Galvanized 67.35# 20'-0" 10¹ ₈ x 2 14 Galvanized 84.19# 25'-0" 10¹ ₈ x 2 12 Galvanized 99.57# 20'-0" 10¹ ₈ x 2 12 Galvanized # 25'-0" * Actual size does not apply to cees. It refers to unequal flange zees only. Consult the MBCI technical manuals for proper product application, design details and other product information. Consult the MBCI COMMERCIAL/INDUSTRIAL TECHNICAL/PRODUCT INFORMATION MANUAL for proper product application, design details and other product information. CP-12 SUBJECT TO CHANGE WITHOUT NOTICE SEE FOR CURRENT INFORMATION EFFECTIVE NOVEMBER 7, 2011

13 ITEM DESCRIPTION PRICE PER EACH ANGLE - 2 x 2, 2 x 4 and 3 x 3 SIZE GAUGE FINISH WEIGHT EA. LENGTH OVER 10 2 x 2 14 Red Oxide 18.48# 20'-0" 2 x 2 14 Galvanized 19.03# 20'-0" 2 x 2 16 Red Oxide 15.44# 20'-0" 2 x 2 16 Galvanized 16.00# 20'-0" 2 x 4 14 Red Oxide 27.86# 20'-0" 2 x 2 2 x 4 14 Galvanized 28.69# 20'-0" 2 x 4 16 Red Oxide 23.29# 20'-0" 2 x 4 2 x 4 16 Galvanized 24.12# 20'-0" 3 x 3 14 Red Oxide 27.86# 20'-0" 3 x 3 14 Galvanized 28.69# 20'-0" 3 x 3 16 Red Oxide 23.29# 20'-0" 3 x 3 3 x 3 16 Galvanized 24.12# 20'-0" NOTE: For lengths other than 20'-0", use custom structural shapes chart on page CP-14 EAVE STRUT - 8 x 5 x 2³ ₄ SIZE GAUGE FINISH WEIGHT EA. LENGTH OVER 10 Girth = 17¹⁵ ₁₆" 8 x 5 x 2³ ₄ 14 Red Oxide 84.00# 19'-11¹ ₂" 8 x 5 x 2³ ₄ 14 Red Oxide # 24'-11¹ ₂" 8 x 5 x 2³ ₄ 14 Red Oxide # 29'-11¹ ₂" 8 x 5 x 2³ ₄ 14 Galvanized 86.50# 19'-11¹ ₂" 8 x 5 x 2³ ₄ 14 Galvanized # 24'-11¹ ₂" Low Eave High Eave 8 x 5 x 2³ ₄ 14 Galvanized # 29'-11¹ ₂" Double Slope Double Slope 8 x 5 x 2³ ₄ 12 Red Oxide # 19'-11¹ ₂" 8 x 5 x 2³ ₄ 12 Red Oxide # 24'-11¹ ₂" 8 x 5 x 2³ ₄ 12 Red Oxide # 29'-11¹ ₂" 8 x 5 x 2³ ₄ 12 Galvanized # 19'-11¹ ₂" 8 x 5 x 2³ ₄ 12 Galvanized # 24'-11¹ ₂" Low Eave High Eave 8 x 5 x 2³ ₄ 12 Galvanized # 29'-11¹ ₂" Single Slope Single Slope NOTE: For lengths other than those show n above, use the follow ing 100 lineal foot prices: 14 ga Red Oxide - 14 ga Galvanized - Specify slope and type of eave strut 12 ga Red Oxide - 12 ga Galvanized - EAVE STRUT - 8 x 5 x 5 SIZE GAUGE FINISH WEIGHT EA. LENGTH OVER 10 Girth = 19¹⁵ ₁₆" 8 x 5 x 5 14 Red Oxide 93.37# 19'-11¹ ₂" 8 x 5 x 5 14 Red Oxide # 24'-11¹ ₂" 8 x 5 x 5 14 Red Oxide # 29'-11¹ ₂" 8 x 5 x 5 14 Galvanized 96.14# 19'-11¹ ₂" 8 x 5 x 5 14 Galvanized # 24'-11¹ ₂" Low Eave High Eave 8 x 5 x 5 14 Galvanized # 29'-11¹ ₂" Double Slope Double Slope 8 x 5 x 5 12 Red Oxide # 19'-11¹ ₂" 8 x 5 x 5 12 Red Oxide # 24'-11¹ ₂" 8 x 5 x 5 12 Red Oxide # 29'-11¹ ₂" 8 x 5 x 5 12 Galvanized # 19'-11¹ ₂" 8 x 5 x 5 12 Galvanized # 24'-11¹ ₂" Low Eave High Eave 8 x 5 x 5 12 Galvanized # 29'-11¹ ₂" Single Slope Single Slope NOTE: For lengths other than those show n above, use the follow ing 100 lineal foot prices: 14 ga Red Oxide - 14 ga Galvanized - Specify slope and type of eave strut 12 ga Red Oxide - 12 ga Galvanized - * Actual size does not apply to cees. It refers to unequal flange zees only. Consult the MBCI technical manuals for proper product application, design details and other product information. Consult the MBCI COMMERCIAL/INDUSTRIAL TECHNICAL/PRODUCT INFORMATION MANUAL for proper product application, design details and other product information. Specify punch pattern - No punch, Standard punch or Optional punch Special Punching: Add $2.65 per Eave Strut NOTES: 1. All optional patterns have the first set of holes 1 from the end of the eave strut. 2. All standard patterns have the first set of holes 1¹ ₄" from the end of the eave strut. 3. Refer to Commercial/Industrial Technical/Product Information booklet for further information on punch patterns. 4. Length tolerance is ± ¹ ₄". 5. For pricing, round lengths up to the nearest 3" increment - Parts shorter than 5'-0" are priced as minimum 5'-0" length. SUBJECT TO CHANGE WITHOUT NOTICE SEE FOR CURRENT INFORMATION EFFECTIVE NOVEMBER 7, 2011 CP-13

14 CUSTOM STRUCTURAL SHAPES PART NUMBER PL03 PL05 PL07 PL08 PL09 PL10 PL11 PL12 GIRTH 3¹⁵ ₁₆" 5¹⁵ ₁₆" 7¹⁵ ₁₆" 8¹⁵ ₁₆" 9¹⁵ ₁₆" 10¹⁵ ₁₆" 11¹⁵ ₁₆" 12¹⁵ ₁₆" GAUGE FINISH PRICE PER 100 LINEAR FEET 16 Red Oxide 14 Red Oxide 12 Red Oxide N/A N/A N/A N/A N/A N/A N/A N/A PART NUMBER PL13 PL14 PL15 PL16 PL17 PL18 PL19 PL20 GIRTH 13¹⁵ ₁₆" 14¹⁵ ₁₆" 15¹⁵ ₁₆" 16¹⁵ ₁₆" 17¹⁵ ₁₆" 18¹⁵ ₁₆" 19¹⁵ ₁₆" 20¹⁵ ₁₆" GAUGE FINISH PRICE PER 100 LINEAR FEET 16 Red Oxide N/A N/A N/A N/A N/A N/A 14 Red Oxide 12 Red Oxide PART NUMBER PL03 PL05 PL07 PL08 PL09 PL10 PL11 PL12 GIRTH 3¹⁵ ₁₆" 5¹⁵ ₁₆" 7¹⁵ ₁₆" 8¹⁵ ₁₆" 9¹⁵ ₁₆" 10¹⁵ ₁₆" 11¹⁵ ₁₆" 12¹⁵ ₁₆" GAUGE FINISH PRICE PER 100 LINEAR FEET 16 Galvanized 14 Galvanized 12 Galvanized N/A N/A N/A N/A N/A N/A N/A N/A PART NUMBER PL13 PL14 PL15 PL16 PL17 PL18 PL19 PL20 GIRTH 13¹⁵ ₁₆" 14¹⁵ ₁₆" 15¹⁵ ₁₆" 16¹⁵ ₁₆" 17¹⁵ ₁₆" 18¹⁵ ₁₆" 19¹⁵ ₁₆" 20¹⁵ ₁₆" GAUGE FINISH PRICE PER 100 LINEAR FEET 16 Galvanized N/A N/A N/A N/A N/A N/A 14 Galvanized 12 Galvanized Consult the MBCI COMMERCIAL/INDUSTRIAL TECHNICAL/PRODUCT INFORMATION MANUAL for proper product application, design details and other product information. PRICE YOUR OWN CUSTOM STRUCTURAL SHAPES: 1. Select the strip width of material to be used 2. Prices in chart above are for 100 Linear Feet Multiply the length of the part times the price per Linear Feet and divide by 100 This will provide the material price for the part length 3. Add for each break 4. Pricing includes banding material for shipment NOTES: 1. Maximum closed angle is 45 degrees 2. Hems cannot be fabricated 3. Slight metal fracturing may occur at bend lines 4. Minimum break dimension is 1¹ ₈" 5. All shapes are subject to tolerances published by MBMA CP-14 SUBJECT TO CHANGE WITHOUT NOTICE SEE FOR CURRENT INFORMATION EFFECTIVE NOVEMBER 7, 2011

15 ITEM DESCRIPTION HAT SECTION PRICE PER EACH (HS-1) PART DIM. WEIGHT OVER 1¹¹ ₁₆" NUMBER "A" GAUGE FINISH EACH LENGTH HW-3100 N/A 22 Galvanized 14.00# 20'-0" HW-3102 N/A 24 Galvanized 11.00# 20'-0" 1¹ ₂" * HW-3104 N/A 26 Random Colors * 8.00# 20'-0" HW-3103 N/A 24 Random Colors 11.00# 20'-0" HW-3105 N/A 16 Red Oxide 25.20# 20'-0" 3" HW-3105 N/A 16 Galvanized 25.80# 20'-0" NOTE: * Subject to availability CHANNEL SECTION PRICE PER EACH (CS-1) PART DIM. WEIGHT OVER 1⁵ ₈" NUMBER "A" GAUGE FINISH EACH LENGTH HW-3110 N/A 18 Galvanized 15.70# 20'-0" 1¹ ₂" 1" SUB-GIRT PRICE PER EACH (SG-1) 1⁵ ₈" PART DIM. WEIGHT OVER NUMBER "A" GAUGE FINISH EACH LENGTH " HW-3120 N/A 18 Galvanized 22.00# 20'-0" 4 HW-3121 N/A 16 Red Oxide 27.40# 20'-0" ¹ ₂" SUB-GIRT PRICE PER EACH (SG-2) 1¹ ₂" PART DIM. WEIGHT OVER NUMBER "A" GAUGE FINISH EACH LENGTH ¹ ₂" HW-3130 N/A 18 Galvanized 13.60# 20'-0" ⁵ ₈" HW-3131 N/A 16 Red Oxide 16.40# 20'-0" 2 FURRING ZEE 1" 1" "A" PRICE PER EACH PART DIM. WEIGHT OVER NUMBER "A" GAUGE FINISH EACH LENGTH HW ¹ ₈" 22 Galvanized 3.33# 10'-0" HW ¹ ₈" 22 Galvanized 4.39# 10'-0" HW ¹ ₈" 18 Galvanized 8.66# 10'-0" HW ¹ ₈" 18 Galvanized 10.35# 10'-0" HW ¹ ₈" 16 Red Oxide 10.54# 10'-0" HW ¹ ₈" 16 Red Oxide 12.60# 10'-0" STRAPPING PART COIL PRICE PER COIL NUMBER WIDTH GAUGE FINISH WEIGHT LENGTH FL-569 2" 24 Random Colors * 84.02# 500'-0" NOTE: * Subject to availability RETROFIT BRACING PART WEIGHT PRICE PER EACH ANGLE NUMBER GAUGE FINISH EACH LENGTH 2¹ ₂ HW Random Colors 8.69# 21'-0" 1¹ ₂ Consult the MBCI COMMERCIAL/INDUSTRIAL TECHNICAL/PRODUCT INFORMATION MANUAL for proper product application, design details and other product information. STRUCTURAL : 1. Custom lengths available - Minimum order required. NOTES: 1. Length tolerance is ± ¹ ₄". 2. Alternate gauges and finishes available: Please inquire. SUBJECT TO CHANGE WITHOUT NOTICE SEE FOR CURRENT INFORMATION EFFECTIVE NOVEMBER 7, 2011 CP-15

16 Houston: 877/ ITEM DESCRIPTION "R" PANEL PRICE PER EACH LIGHT TRANSMITTING PANEL PART SQ. FT. WEIGHT OVER NUMBER LENGTH TYPE WEIGHT EACH HW '-8" White 1 8 ounce 16.89# High Strength Fiberglass - 30% Light Diffusion HW '-8" White 1 8 ounce 16.89# HW '-0" White 1 8 ounce 17.42# HW '-0" White 1 8 ounce 19.00# High Strength Fiberglass - U.V. Resistant NOTE: State of Florida Approved HW '-6" Clear 1 8 ounce 7.88# High Strength Fiberglass - U.V. Resistant Note: It is the users responsibility to ensure that the installation and use of all light transmitting panels comply with State, Federal and OSHA regulations and laws, including, but not limited to, guarding all light transmitting panels with screens, fixed standard railings, or other acceptable safety controls that prevent fall-through. "U" PANEL PRICE PER EACH LIGHT TRANSMITTING PANEL PART SQ. FT. WEIGHT OVER NUMBER LENGTH TYPE WEIGHT EACH HW '-8" White 1 8 ounce 16.89# High Strength Fiberglass - 30% Light Diffusion HW '-8" White 1 8 ounce 16.89# HW '-0" White 1 8 ounce 19.00# High Strength Fiberglass - U.V. Resistant Note: It is the users responsibility to ensure that the installation and use of all light transmitting panels comply with State, Federal and OSHA regulations and laws, including, but not limited to, guarding all light transmitting panels with screens, fixed standard railings, or other acceptable safety controls that prevent fall-through. 7.2 PANEL PRICE PER EACH LIGHT TRANSMITTING PANEL PART SQ. FT. WEIGHT OVER NUMBER LENGTH TYPE WEIGHT EACH HW '-0" White 1 8 ounce 19.00# High Strength Fiberglass Note: It is the users responsibility to ensure that the installation and use of all light transmitting panels comply with State, Federal and OSHA regulations and laws, including, but not limited to, guarding all light transmitting panels with screens, fixed standard railings, or other acceptable safety controls that prevent fall-through. Consult the MBCI PBR & PBU TECHNICAL/PRODUCT INFORMATION MANUAL for proper product application, design details and other product information. NOTES: 1. Green light transmitting panels are available on special request. 2. Type 2 (fire rated) light transmitting panels are available, please inquire. WARNING: These light transmitting panels are not designed or intended to bear the weight of any person walking, stepping, standing or resting on them. Metal Building Components, L.P., DISCLAIMS ANY WARRANTY OR REPRESENTATION, EXPRESSED OR IMPLIED, that any person can safely walk, step, stand or rest on or near these light transmitting panels or that they comply with any OSHA regulation. CP-16 SUBJECT TO CHANGE WITHOUT NOTICE SEE FOR CURRENT INFORMATION EFFECTIVE NOVEMBER 7, 2011