RIGID WALL SHELTER SOLUTIONS

Transcription

1 RIGID WALL SHELTER SOLUTIONS MOBILE PORTABLE RIGID WALL COMMUNICATIONS SHELTER SOLUTIONS1

2 RIGID WALL SHELTER SOLUTIONS THE ALL-COMPOSITE ADVANTAGE Will-Burt s all-composite rigid wall shelter and container solutions deliver significantly lower life-cycle costs and increased performance advantages over shelters and containers constructed of metal and combination composite/metal materials. Our patented technology meets current industry demands for shelters and containers that are exceptionally strong, easy to transport/deploy, weigh less, require less maintenance, provide thermal efficiency, have lower overall lifecycle costs, and can be deployed in extreme environments. Will-Burt s shelters and containers are constructed with all composite materials, including patented corner columns, roof, floor and walls, enabling them to perform under extremes of temperature, environment, and geography, combat and/or utility. PRODUCTS Vehicle Mounted Shelters, Containers, 1 and 2 Side Expandable, Rigid Wall ISO Shelters, Containers Non-Expandable, Rigid Wall ISO Shelters, Containers Modular, Extendable, Rigid Wall Shelter Lower Energy Consumption Longer Life Less Maintenance Greater Loading Higher Stackability Stronger Protected Operational In Extreme Environments Weight Composites offer up to 40% weight savings over traditional metal and alloy-based structures, saving valuable fuel dollars. Energy Will-Burt composite shelters offer a higher thermal R-value, saving valuable energy needed for heating/cooling. Corrosion Resistance No More Bustin Rust! Will-Burt composite shelters are inherently resistant to rust and other chemicals, thus requiring less depot and field maintenance. Strength Will-Burt s composite shelter strength per unit density is stronger than aluminum and steel resulting in a superior strength to weight ratio. Loading Lower shelter/container weight allows for more equipment to be integrated within the shelter. 9 Stacking High Designed to carry up to 211,657-lb (96,000-kg) force on any given corner quite an achievement for a shelter or container weighing 4,900-lbs. (2,223-kg). EMI/HEMP Protection Will-Burt composite shelters have exceeded performance thresholds for Electromagnetic Interference (EMI) and High Electromagnetic Pulse (HEMP) protection, ensuring a secure operational environment. 2

3 ASSURE ASCEND ACCELERATE CONTENTS SECM VEHICLE MOUNTED... 4 NON EXPANDABLE... 6 CMERWS... 5 EXPANDABLE... 7 RIGID WALL SHELTER SOLUTIONS 3

4 RIGID WALL SHELTER SOLUTIONS VEHICLE MOUNTED SECM - SHOP EQUIPMENT CONTACT MAINTENANCE Will-Burt s all-composite HMMWV-mounted SECM (Shop Equipment Contact Maintenance) shelter weighs 40% less than the same size tall variant metal SECM shelter, providing significant fuel savings. Will-Burt s SECM delivers exceptional functionality because it can be easily removed from the HMMWV with the entire tool load in place and mounted on another HMMWV or trailer. Saves transportation fuel costs Carry more tools Can be loaded on HMMWV or Trailer Roof doubles as a two-person non-slip work platform Additional over-cab storage for up to 320 lbs. 4

5 ASSURE ASCEND ACCELERATE CMERWS - COMPOSITE MODULAR EXTENDABLE RIGID WALL SHELTER Will-Burt s CMERWS delivers the ultimate in flexibility of deployment with multiple configurations and applications. Whether for a mobile command center, mobile hospital, or any other application, the CMERWS may be setup in expanding modular segments to fit mission requirements. MINI-CMERWS The Mini-CMERWS is the building block base unit that measures 18 x 18. With the addition of modular 6 sections, the Mini-CMERWS can be expanded out to 18 x 54 for a fullsize CMERWS. Greater flexibility Mini-CMERWS (18 x 18 ) base shelter expands in six foot increments for custom sizing Can be palletized for shipment with a Mini-CMERWS being transportable on two 463L pallets or in an ISO shelter Has vestibule connectivity to standard size military shelters Improved interior space Mini-CMERWS provides 324 sq ft of clear usable space Arched trusses accommodate equipment up to 90 in height Easier to erect and strike Can be erected and struck by 4 trained personnel in less than 40 minutes Shelter was designed for military standard lifting capacities of the 95th percentile female soldier Three-piece, light weight, carbon fiber roof truss, easily pins together Safety Features Roof, main floor and cab-over floor is non-slip Tie-down kit for high winds Easy to clean and disinfect all interior surfaces RIGID WALL SHELTER SOLUTIONS 5

6 RIGID WALL SHELTER SOLUTIONS NON-EXPANDABLE ISO 688 Type 1C, 9-High Stacking Will-Burt s all-composite, non-expandable ISO shelter and container technology meets current industry demands for shelters and containers that are exceptionally strong, easy to transport and deploy, weigh less, require less maintenance and fuel, and have lower life cycle costs than conventional metal structures. Exterior Size: ISO 668 1C, 8 ft. H x 8 ft. W x 20 ft. L (2.4m x 1.4m x 6m) Shelter Tare Weight: 4,950 lbs. (2,223 kg) Payload: 15,050 lbs. (6,849 kg) Gross Weight: 20,000 lbs. (9,072 kg) Service Life: Up to 30 years Heat Transfer: Basic shelter heat transfer coefficient of BTU/hr. /ft. sq. /degrees F; R-8 Temperature Ranges: Operation: -60F / -51C to +125F / +52C; Solar load: to +205F / 96C; Storage: -70F / -56C to +160F / +71C Roof Load: 40 lbs. /ft. sq. (18 kg) Floor load: 107 lbs. /ft. sq. (29 kg) Wall attachments: Up to 2,000 lbs. pullout (907 kg) Additional: Meets or exceeds DOD ASTM E standards. QUADCON Originally designed for military dive operations, Will-Burt s non-expandable QUADCON protects sensitive equipment in highly corrosive marine environments. This very durable, non-corroding, light-weight container is the ideal solution for storage and transport, providing savings in equipment maintenance and over-all life cycle costs. Greater longevity No corrosion in salt or alkaline environments 30-year robust composite shelter body All metal fittings are stainless steel Greater use flexibility Sides are smooth rather than corrugated Fork-lifted from both sides 6

7 ASSURE ASCEND ACCELERATE EXPANDABLE ONE AND TWO SIDE EXPANDABLE ISO Will-Burt s nine-high stackable ISO expandable shelters and containers combine the inherent corrosion and ballistic resistance of carbon composites with a seamless monocoque design to protect personnel and sensitive equipment in some of the world s most austere and harsh environments. Easy to erect and strike Simple and ergonomically friendly, no heavy parts to move, can be erected with only two people, no loose parts Excellent floor and roof loading capacity 100 lb/sq ft floor and roof loading Greater thermal efficiency 17 BTU/hr/ ft2/f exceeds.35 BTU/hr/ft2/F ASTM-1978 limit Greater stackability 9 high vs 6 high for DoD Standard Family of shelters RIGID WALL SHELTER SOLUTIONS 7

8 CONTACT YOUR SALES REPRESENTATIVE TODAY The Will-Burt Company ( located in Orrville, Ohio, USA, is the world s premier manufacturer of mobile telescoping masts, towers and pan and tilt positioners. We offer virtually every payload elevation and integration solution from the top brands; Will-Burt, GEROH, Integrated Tower Solutions (ITS) and MAD for military, first responders, cellular, broadcast, entertainment and other applications. Will-Burt designs and manufactures shelters made of all-composite materials that deliver higher performance at lower life cycle cost than metal or partial composite shelters. Will-Burt s LINX security solutions provide integrated access control and intrusion detection certified to protect critical assets. Will-Burt offers a variety of metal fabrication and manufacturing services backed by a certified ISO 9001:2015 Quality Management System and ISO 14001:2004 Environmental Management System. Incorporated in 1918, Will-Burt is 100% employee-owned and is classified as a small business. Made in the USA UNITED STATES EUROPE UNITED KINGDOM ASIA WORLD HEADQUARTERS 169 S. Main St., Orrville, Ohio USA Telephone: Mast Customer Service: Fax: contact_us@willburt.com GEROH A Will-Burt Company Fischergasse Waischenfeld, Germany Telephone: Fax: info@geroh.com MAD Unit 5, Station Approach Four Marks, Alton Hampshire, GU34 5HN, United Kingdom Telephone: +44 (0) Fax: +44 (0) info@madcctv.com SINGAPORE SALES OFFICE 1 Fullerton Road, #02-01 One Fullerton, Singapore Telephone: Fax: INTEGRATED TOWER SYSTEMS 2703 Dawson Road, Tulsa, OK Telephone: Fax: programs@itstowers.com ISO ISO 14001:2004 UK SALES OFFICE Unit 5b, Station Approach Four Marks, Alton Hampshire, GU34 5HN, United Kingdom Telephone: +44 (0) Fax: +44 (0) September, 2017 The Will-Burt Company