+44 (0)

Transcription

1 Product Portfolio

2 2 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

3 contents page Introduction Burgess By System' 4-5 Metal Ceilings 6-7 Sequence Acoustic Mineral Gypsum Plasterboard Product Ranges 1. Metal Ceilings Sequence Mineral Gypsum Plasterboard Lighting Suspension Systems Suspension Systems Trims Trims Sector Solutions Sector Specifications Technical Technical Overview 201 Acoustics Environment Fire Hygiene 209 Light Reflectance 210 Healthcare 211 Maintenance, Handling & Storage Handling & Storage Cleaning 214 Removal of Concealed Metal Clip-in Tiles 215 Installation Guide 216 3

4 Interiors to look up to Burgess By System' was formed by bringing together two leading brands to create a formidable force within the architectural interiors market. Along with a heritage of 120 years industry experience, it s the passion and commitment within Burgess By System', which drives us to be leaders, innovators, and most importantly, trusted manufacturers. 4 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

5 Introduction Proven Solutions We have always produced dependable interior solutions. Today, we offer an industry leading range of architectural products, including: mineral, soft fibre, Gypsum and metal ceilings, as well as suspension and partitioning systems. All of our products are designed and manufactured to the latest performance and sustainability requirements of modern architecture. All Burgess By System' ceilings and components are manufactured in accordance with BS EN standard for suspended ceilings. Dependable Technical Expertise Our comprehensive product range is supported by our highly experienced technical team. Our unbiased, tailored and detailed advice is focused on helping you meet design requirements, be aware of potential technical complications and possible solutions, conform to stringent specifications and keep within budget. Our proven technical capability and dependable support are key reasons why we have such an extensive and diverse client base. Driven By You Putting you first is our imperative. Our business is driven by the commitment to provide high-quality, innovative and market relevant solutions to you. Everything we do is built around helping you achieve your interior design aspirations. 5

6 Metal Ceilings Range Accomplished metal ceiling systems that combine style, quality and high-performance. 6 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

7 Metal Ceilings Introduction The Burgess By System' name has been synonymous with quality engineered metal ceilings since the 1950s. Metal ceilings are manufactured in Hinckley in compliance with BS EN ISO 9001 quality and BS EN ISO environmental Management Systems. The unique Pip & Stop feature on our patented clip-in system ensure easy installation and levelling. A wide range of perforations, edge profiles, panel sizes and colour offers complete freedom to specifiers and clients. Burgess By System's metal ceilings are the only system to come with approved health sector antibacterial resistance finishes as an option. Specific solutions for secure ceilings, corridors, external canopies and curved ceilings can all be catered for within the standard range. High-quality powder-coated steel panels ensure longevity and durability while maintaining impressive aesthetics. 7

8 1. Metal Ceilings Range Index page Concealed Clip-In 9-10 Clip-In A-Bar Healthcare Security Hook-On Grille Tile External Swingdown Access Panels Exposed Lay In Tegular Linear Blade System E Modular Beam Open Cell Ceilings Mesh Ceilings Semi Concealed Linear Beam Bespoke Design Curvatura Metalflair Metal Baffles Special Finishes 52 Perforation Patterns Clip-In Wall Panels Nilgrid The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

9 Clip-In 9

10 Clip-In Installation Diagram 300 maximum from perimeter 1500 maximum centres 1500 maximum centres 300 maximum from perimeter GT 112 Suspension Channel GT 114 Suspension Angle Acoustic / Insulation Pad (optional) GT 109 Bracket Clip-In Tile Type A Tile 5mm Bevel edges to all sides M6 Fixing or Equivalent GT 115 Full Tee Bar 45 Length 25 Tile Size Edge Details A B C D F up to 1.00* w Up to Class A* Width 300 x x x x 300 NRC up to * Type B Tile Bevel edges longitudinally, square edges on end 1200 x x x x 300 D nfw /D ncw 26-42dB Length 2400 x x x 500 Width 24 x 24 A2-s1, d0 (BS EN ) Please contact technical sales for further information Type C Tile Square edges to all sides Length GT109 Universal Bracket 45 Circa 9kg/m² Width None without additional measures Type D Tile Square edges to all sides Tile Module Dust or vacuum with clean soft brush Wipe with clean damp sponge Length Width GT 112 Suspension Channel GT 115 Full Teebar 29 Tiles are demountable Type F Tile 2mm Bevel edges to all sides Type A Clip-In Tile Recyclable Length 5 5 Warranty available Width *Performance is dependent on perforation and infill 10 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

11 Clip-In A Bar 11

12 Clip-In A Bar INSTALLATION DIAGRAM 1500mm x 1500mm GT180 GT112 GT183 up to 1.00* w Up to Class A* NRC up to * D nfw /D ncw 26-42dB A2-s1, d0 (BS EN ) Type A Tile 5mm Bevel edges to all sides 54 Length 25 Width COMPONENT PARTS Product No. GT 180 Description: 3600mm long A bar 16.4mm wide x 38.5mm deep rigidised steel. Unit Weight:1.7kg Tile Size 600 x x 600 Edge Details A Product No. GT 113 Description: Suspension channel coupler 152mm long pre-drilled with two 7mm diameter clearance holes 35 x 16 x 1.2mm galvanised mild steel. Unit Weight:0.1kg Product No. GT 114 Description: 3000mm long suspension angle 19 x 19 x 0.8mm galvanised mild steel. Unit Weight: 0.55kg Please contact technical sales for further information Circa 9kg/m² Product No. GT 181 Description: A bar coupler 100mm long x 22mm deep 0.55mm galvanised steel. Unit Weight:0.02kg 1200 x x x x None without additional measures Dust or vacuum with clean soft brush Product No. GT 183 Description: A bar suspension bracket 50mm wide x 53.5mm high x 40.5mm drop, 1.2mm galvanised steel. Unit Weight:0.02kg Wipe with clean damp sponge Tiles are demountable Description: 3000mm long suspension channel, 38 x 19 x 1.6mm galvanised mild steel. Unit Weight:2.5kg Recyclable Warranty available Product No. GT 137 Description: Extractor tool type 3. Spring steel blade with wooden handle. *Performance is dependent on perforation and infill 12 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

13 Healthcare 13

14 Healthcare Our Healthcare range of tiles are protected with a powder coating technology that has advanced anti-bacterial qualities. The metal range with the incorporation of healthcare coating offers the opportunity to specify products into hygiene conscious environments, which will give 24 hour protection against the growth of a wide range of micro-organisms throughout the lifetime of the product. Protection against E-coli Salmonella Listeria Legionella Pseudomonas MRSA up to 1.00* w Up to Class A* NRC up to * D nfw /D ncw 26-42dB A2-s1, d0 (BS EN ) Please contact technical sales for further information Circa 9kg/m None without additional measures Dust or vacuum with clean soft brush Wipe with clean damp sponge Tiles are demountable Recyclable Warranty available * Performance is dependent on perforation 14 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

15 Security 15

16 Security INSTALLATION DIAGRAM Grid details as Clip-In exterior ceilings up to 1.00* w Up to Class A* NRC up to * Security clip GT1071 hooks into the four adjoining tiles at corner locations and secures tiles to grid over the tee bars GT115 GT 1071 Security clip D nfw /D ncw 26-42dB Tile Module A2-s1, d0 (BS EN ) Please contact technical sales for further information Type A Tile 5mm Bevel edges to all sides 45 Length 25 Circa 9kg/m ) Width None without additional measures Dust or vacuum with clean soft brush Wipe with clean damp sponge Tiles are demountable Recyclable Edge Details Tile Size A 500 x x x 600 We only recommend the use of our Tee Bar for this system. Each piece of our Tee Bar is identified as such on the rear face. Warranty available * Performance is dependent on perforation 16 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

17 Hook-On 17

18 Hook-On INSTALLATION DIAGRAM 38mm deep Zed Bar suspension GT114 maximum 1500mm x 1500mm centres GT112 Suspension channel 38mm x 19mm up to 1.00* w Up to Class A* NRC up to * D nfw /D ncw 26-42dB A2-s1, d0 (BS EN ) TILE SIZES A wide range of sizes from 300 to 600mm wide x 600 to 2400mm length. Variable Please contact technical sales for further information Circa 9kg/m ) None without additional measures Dust or vacuum with clean soft brush Wipe with clean damp sponge Tiles are demountable Recyclable Warranty available * Performance is dependent on perforation 18 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

19 Grille Tile 19

20 Grille Tile The Clip-In Grille Tile has been developed for use in ventilated ceilings for the supply or extraction of large volumes of air where standard perforated tiles are inadequate. Grille Tiles are available in a range of module sizes and colours. The tiles have a standard border of 53mm and contain a central 13mm cell louvre retained in INSTALLATION DIAGRAM GT109 GT114 hangers at 1500mm maximum centres in either direction GT112 Grid components details on pages 20 & 21 GT115 Normal tile TYPE A TILE 5mm Bevel edges to all sides Grille tile 45 Length 25 Width Edge Details Tile Size A 600 x x The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

21 External 21

22 External External INSTALLATION DIAGRAM 300 maximum from perimeter 1200 maximum centres 1200 maximum centres 300 maximum from perimeter GT 112 Suspension Channel GT 114 Suspension Angle GT 109 Bracket Clip-In Tile M6 Fixing or Equivalent GT 115 GT 1071 Security Clip up to 1.00* w Up to Class A* NRC up to * TYPE A TILE 5mm Bevel edges to all sides D nfw /D ncw 26-42dB 45 Length 25 Width A2-s1, d0 (BS EN ) We only recommend the use of our Spring Tee for this system. Each piece of our Spring Tee is Please contact technical sales for further information GT 1071 Security clip Circa 9kg/m²) None without additional measures Tile Module PVC Plastisol coating to tiles* Dust or vacuum with clean soft brush Wipe with clean damp sponge Tiles are demountable Edge Details Tile Size A 500 x x x 600 Recyclable Warranty available *Performance is dependent on perforation 22 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

23 Swingdown 23

24 Swingdown INSTALLATION DIAGRAM 1500 maximum centres 1500 maximum centres 300 maximum from perimeter 300 maximum from perimeter GT 115 GT 114 Suspension Insulation pad (optional) Full Tee Bar Angle GT 112 Suspension Channel GT 109 Universal Bracket up to 1.00* w Up to Class A* NRC up to * D nfw /D ncw 26-42dB Tile Size Edge Details A F 600 x 300 A2-s1, d0 (BS EN ) 600 x x 300 Type A Tile 5mm Bevel edges to all sides Type F Tile 2mm Bevel edges to all sides 1200 x 600 Please contact technical sales for further information 1500 x x x Length 25 Width 45 Length 25 Width Circa 9kg/m² GT109 Universal Bracket 19 GT112 Suspension Channel None without additional measures GT 115 Full Tee Bar Dust or vacuum with clean soft brush Wipe with clean damp sponge Acoustic Inlay tabbed in position (optional) Tiles are demountable Note: When swinging tile into vertical position the tile should be slid along the tee bar away from the adjacent tile to avoid interference. Recyclable We only recommend the use of Burgess CEP Tee Bar for this system. Each piece of Burgess Tee Bar is identified as such on the rear face. Warranty available *Performance is dependent on perforation 24 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

25 Access Panel 25

26 Access Panel Access Panels are manufactured to resemble the main ceiling panels both in respect to size and edge detail. They are used in locations where security tiles are employed or where regular access to the ceiling void is necessary for electrical or mechanical services. The panels are manufactured with reinforced frames that provide rigidity to the panel whilst permitting the panel to hinge down for access to the ceiling plenum. Access Panels are fitted with locking devices to retain the panel in the ceiling and prevent unauthorised access. Locks can be operated with a square shanked key (budget locks) or, in particularly sensitive areas such as police stations or prisons, the locks can be key operated (Yale Type). Edge Details Tile Size A 600 x x 600 Tiles can pivot on either 1200mm or 600mm edge TYPE A TILE 5mm Bevel edges to all sides 45 Length 25 Width Access panel 26 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

27 Lay-In 27

28 Lay-In The term Lay-In refers to tiles that have minimal tile face coverage by the supporting exposed grid as distinct from lay-on tiles where the face of the tile is fully visible. Lay-In Tiles are used with an exposed grid table usually 24mm wide although different grid table widths are available. Where Lay-In perforated tiles are required it is recommended that the supported edges of the tile are perforated and the unsupported edges (usually the long sides) have plain borders. This arrangement provides the appearance of a plain border edged tiled ceiling with the exposed table grid providing the border on the supported edges. The grid is supported by GT114 hangers at 1200mm maximum centres in both directions. up to 1.00* w Up to Class A* NRC up to * EDGE DETAILS D nfw /D ncw 26-42dB A2-s1, d0 (BS EN ) Module Size 600 x x 600 Grid Width Please contact technical sales for further information SIZES AVAILABLE Circa 7.2kg/m² 38 None without additional measures Dust or vacuum with clean soft brush Wipe with clean damp sponge 24 Tiles are demountable Recyclable Warranty available *Performance is dependent on perforation 28 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

29 Tegular 29

30 Tegular INSTALLATION DIAGRAM 300 maximum from perimeter Hanger 1200 maximum centres 1200 maximum centres Tile module Tile module Tegular tile Exposed grid up to 1.00* w Up to Class A* NRC up to * D nfw /D ncw 26-42dB Module Size Tile Face Size (nom) 600 x x x x 575 Tile Depth Grid Width Edge Details A C 600 x x x x A2-s1, d0 (BS EN ) 600 x x x x x x Please contact technical sales for 500 x x further information 750 x x Circa 7.2kg/m² 600 None without additional measures Lay-In tile 250 min Standard suspension tee Square edge tile (nom) 15 Dust or vacuum with clean soft brush Wipe with clean damp sponge GT Standard suspension GT 120 tee 38 Lay-In tile Square edge tile Tiles are demountable Bevel edge tile (nom) Recyclable Warranty available *Performance is dependent on perforation 30 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

31 Linear Blade System E 31

32 Linear Blade System E Linear Blade System E comprises blade shaped ceiling profiles that are hung vertically from the suspension to form an open screen linear perspective interior ceiling. Made from steel, the blades can be supplied up to 200mm deep (100mm being the standard depth) and are clipped to the carrier at 50mm min. modules. It can be seen that Linear Blade System E offers provision for air movement through the ceiling, or smoke extraction from the void area. The system is particularly suited for use in open areas in buildings such as airports or shopping malls. A2-s1, d0 (BS EN ) Please contact technical sales for further information Circa 4.5kg/m² None without additional measures Dust or vacuum with clean soft brush Wipe with clean damp sponge Tiles are demountable Recyclable Warranty available *Performance is dependent on perforation 32 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

33 Modular Beam 33

34 Modular Beam The Modular Beam Grid system combines design flexibility with a highly engineered ceiling system. The beam sections are used to support the ceiling panels/planks as well as allowing the integration of a range of service elements. The main beams are installed parallel with plain cross noggins running between them to form a modular grid ceiling. Beams can be manufactured in a number of widths and used to create module sizes of up to 1500 x 1500mm. Modules can be infilled with either a single panel or a number of smaller planks. Where required large panels can be supplied with hinges, mechanical latches and restraining wires to facilitate ease of access. INSTALLATION DIAGRAM GT114 hangers at 1500mm maximum centres in both directions GT112 at 1500mm maximum centres up to 1.00* w Up to Class A* NRC up to * Main beams D nfw /D ncw 42dB* A2-s1, d0* B-s1, d0* BS EN Cross beams or noggins Typical layouts Up to 1600mm recommended maximum module Up to 1600mm recommended maximum module Circa 9kg/m² None without additional measures Dust or vacuum with clean soft brush Wipe with clean damp sponge Beams available in widths from 100mm to 300mm Tiles/planks are demountable Recyclable Warranty available *Performance is dependent on perforation 34 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

35 Open Cell Ceilings 35

36 Open Cell Ceilings Open Cell Panels can come in a variety of cell sizes and depths and are available in most RAL colours They can also be made with a wood appearance. Panels can be installed onto and demounted easily from Burgess By System EX24 and EX15 suspension systems. Panels are usually supplied unassembled but can also be supplied assembled if requested. DIMENSIONS 30 b15 h b15 h Acoustic Fleece b15 h40/55 (Acoustic Fleece Application) 35 x y h b24 h b15 h30 b15 h x y h b15 h50 x y h b15 h40/55 x y h x y h The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

37 Mesh Ceilings 37

38 Mesh Ceilings The Burgess By System range of Mesh Ceilings will provide a rustic and industrial look to compliment your interior designs. Choose from an almost infinite number of styles, hole sizes, sheet thicknesses and colour finishes to create a truly stunning metal ceiling system. WHAT MAKES MESH UNIQUE? Traditional Expanded Metal Mesh is basically a sheet of metal with diamond shaped holes. The holes are produced by using an expanding machine, which uses a pressured slitting and stretching process to transform solid metal sheets and coils into beautifully finished, expanded metal mesh. THE PRODUCTION PROCESS STEP 1 Sheets or coils of metal are fed into the expanding machine. Due to the decorative patterns being created by the slits and stretching, there is zero waste generated. The process for expanding metal was first patented in Hartlepool, UK in the 1880 s and despite the amount of time which has elapsed since then, the process remains true to the original idea. The process is simple but incredibly effective... STEP 2 Each machine is fitted with a unique knife, designed to create a particular pattern. Unlimited patterns, to exactlly match your design STEP 3 The machines are then programmed or manually controlled to expand the metal to exact specification. STEP 4 Using the unique shearing and stretching process means very little waste is created. The metal is sheared and then stretched in a single process creating the apertures and therefore expanding the metal. The mesh is then formed into one of our many ceiling systems and finished with our factory applied polyester powder coating. Green Engineering Zero waste 38 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

39 COLOURS Available in any RAL colour Patterns All of our Steel Meshes are made from a variety of grades. The most common grades are Hot Rolled, Cold Reduced, Electro Zinc and Galvanised Steel. All materials can be coated using various applications, i.e. galvanising, painting, powder coating, etc. All Steel grades supplied conform to the relative quality standards / / / / / / / /4097/

40 Details - Raised mm 3.50mm 0.60mm mm 3.39mm 0.60mm mm 3.50mm 0.60mm mm 5.64mm 0.60mm mm 5.64mm 0.60mm mm 5.64mm 0.60mm mm 5.64mm 0.75mm mm 5.64mm 0.75mm mm 5.64mm 1.00mm mm 5.64mm 1.00mm mm 5.64mm 1.20mm mm 4.76mm 1.00mm mm 5.64mm 1.00mm mm 7.43mm 1.00mm mm 9.52mm 1.20mm mm 9.52mm 1.00mm mm 13.86mm 2.50mm mm 11.72mm 1.60mm mm 11.72mm 1.60mm mm 11.72mm 1.20mm mm 11.72mm 2.06mm mm 11.72mm 2.06mm mm 11.72mm 1.20mm mm 16.93mm 3.00mm mm 16.48mm 1.60mm mm 16.93mm 1.20mm mm 22.58mm 3.00mm mm 22.58mm 3.00mm mm 22.58mm 2.50mm mm 22.58mm 1.60mm mm 22.58mm 1.60mm mm 22.58mm 1.20mm mm 22.58mm 1.60mm mm 24.38mm 1.60mm mm 33.87mm 3.00mm mm 33.87mm 2.50mm mm 33.87mm 3.00mm mm 33.87mm 3.00mm mm 40.64mm 3.00mm mm 39.33mm 2.50mm mm 45.65mm 3.00mm mm 50.80mm 3.00mm mm 36.33mm 3.00mm mm 40.64mm 4.50mm mm 40.64mm 4.50mm mm 40.64mm 4.50mm mm 40.64mm 3.00mm mm 39.33mm 3.00mm mm 16.93mm 1.60mm The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

41 COLOURS Available in any RAL colour Patterns TCG 217F F 706F 0794F 902/ TCG 1279F 1280F 1281F/1282F 1283F/N0921F 1584F 1585F 2073F 2074F 2076F/2077F 2080F 2490F 3393F 2493F 3394F 3084F/3085F 3395F 41

42 Details Tinplate Raised Meshes Pre-Galvanised Steel Flattened Pre-Galvanised Mild Steel Flattened 42 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

43 Bespoke Designs Expanded Mesh can be supplied in a variety of finishes, thickness, raised or flattened. Flattened is smoother and does not indent soft material, however it is not as strong as the more robust raised mesh. Powder coating in your choice of colour will enhance its aesthetic appearance and add to its corrosion resistance as would plastic coating. Patterns & Shapes In addition to the traditional diamond shaped range of meshes, the expanding metal process can produce a dynamic variety of designs. Features and Benefits Expanded Metal Mesh has a diverse range of properties, which makes it so versatile and appealing, here are some of the key strengths of expanded metal mesh: Highly efficient conductor Electricity, magnetic flux and heat can all flow through expanded metal mesh, as there is a continuous connection throughout each sheet. There are no breaks or welds because the mesh has been formed from a single piece of metal. The mesh is formed from a single piece of metal Which means that there is nothing to work loose, no fretting strands or strained joins or welds. This makes expanded mesh ideal for forming and beneficial to further processing such as pressing and shearing. Higher strengthto weight ratio than sheet metal By expanding metal from its solid sheet form, additional strength is added. The uncut knuckles of expanded mesh withstand stress better than welds or joints. The process is not wasteful of material The expanding process involves slitting and stretching the metal to create holes, which means there is no waste. This provides you with direct cost savings, compared to other methods eg: perforating metals (punching out the holes), the holes are treated as waste and will incur extra cost to you. 43 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

44 44 Linear Beam

45 Linear Beam The Linear Beam ceiling system provides a high specification solution for office and commercial environments. The beam sections are available in a number of standard widths and are installed parallel and in a single direction, creating a discrete linear ceiling effect. The infill planks are normally supplied in 300mm widths, lengths up to 2400mm, and the choice of a plain or perforated surface finish. Planks can be supplied with; square edges all round or bevelled edges to long sides only. They can also be supplied in a format that allows them to be hinged from the linear beam if required. INSTALLATION DIAGRAM GT114 hangers at 1500mm maximum centres in both directions Beam support brackets GT112 primary support channels at 1500mm maximum centres up to 1.00* w Up to Class A* NRC up to * D nfw /D ncw 42dB* A2-s1, d0* B-s1, d0* BS EN Lay on planks of lengths up to 2400mm. Plain or perforated panels can be used Circa 9kg/m² Supporting beams None without additional measures Dust or vacuum with clean soft brush Wipe with clean damp sponge Crosslock 100 Beams available in widths from 100mm to 300mm Tiles/planks are demountable Recyclable Warranty available *Performance is dependent on perforation 45 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

46 46 Curvatura

47 Curvatura The Curvatura 3-D system gives you the freedom to create dramatic three-dimensional curved designs that combine shape, texture and lighting. The systems curved main tee segments, suspension profiles, optional edge trim and flexible infill panels provide endless possibilities to create beautiful and dramatic designs. SYSTEM DIAGRAM Wire hanger supports Hold down clips Splice Spacer/stabilizer bar A2-s1, d0 (BS EN ) Curved panels Please contact technical sales for further information Curved exposed tee grid None without additional measures Dust or vacuum with clean soft brush Wipe with clean damp sponge Tiles are demountable Recyclable 47 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

48 48 Metalflair

49 Metalflair DESIGN EXAMPLES Variable Blind Box Section repeatable pattern Variable GT 120 Cut panels to be supported by Blind Box Section, complete with hold down wedges (GT 120), triangular perforated panels Variable Top Hat Section Upstand Section Variable Variable GT GT 120 Cut panels to be supported by Top Hat Section, complete with hold down wedges (GT 120), Cut panels to be supported by Upstand Section, complete with hold down wedges (GT 120), 49 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

50 50 Metal Baffles

51 Metal Baffles A completely different aesthetic and acoustic solution, the Metal Baffles range is a great alternative to suspended ceiling solutions. The range maintains the feeling of open space, whilst offering sound acoustic properties. The metal baffles are suspended vertically directly from the ceiling and can be face painted for desired aesthetics. SYSTEM DIAGRAM 3000mm BAFFLE SUPPORT CHANNEL 200mm SPLICE PLATE 50X50mm FIXING ANGLE RETAINING CLIP up to 1.00* w Up to Class A* NRC up to * ACOUSTIC BAFFLE BAFFLE END CAP A2-s1, d0 (BS EN ) Please contact technical sales for further information None without additional measures Dust or vacuum with clean soft brush Wipe with clean damp sponge Tiles are demountable Recyclable PANEL SIZES Standard panel sizes are 50mm wide and can be 1200/1500/1800mm long; other sizes may be possible, contact technical sales. Various perforation patterns available. Warranty available *Performance is dependent on perforation 51 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

52 Special Finishes Create sophisticated environments of great visual impact with our vast range of special finishes. The options are endless so contact us to discuss your design possibilities. DOT-ART PATTERN DESIGN METAL PRINTING MATERIC EFFECTS 52 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

53 53 Perforation Patterns

54 Perforation Patterns Burgess By System offer a range of standard perforation patterns as detailed below. These patterns can be supplied with plain borders and as blocks of perforations within a tile. Further perforation patterns are available upon request. S0701 ultra microperf 0.7mm hole; 5mm pitch; 1% open area D mm hole; 4mm pitch; 22% open area S mm hole; 4mm pitch; 11% open area D mm hole; 8mm pitch; 6% open area dia dia dia dia º S mm hole; 8mm pitch; 3% open area S mm hole; 3.97mm pitch; 28% open area dia dia. S mm hole; 5.5mm pitch; 14% open area dia. D mm hole; 7.94mm pitch; 14% open area dia S mm hole; 7.94mm pitch; 7% open area dia. D mm hole; 11mm pitch; 7% open area dia. D mm hole; 15.88mm pitch; 4% open area S mm hole; 11mm pitch; 4% open area dia dia. 11 D mm hole; 6.26mm pitch; 36% open area D mm hole; 8.64mm pitch; 33% open area S mm hole; 8.64mm pitch; 17% open area S5046 5mm hole; 6.5mm pitch; 46% open area dia dia dia dia S5012 5mm hole; 13mm pitch; 12% open area dia The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

55 55 Clip-In Wall Panels

56 Clip-In Wall Panels Clip-In Wall Panels The Clip-In Wall Panels incorporate Burgess By System s standard metal tiles and suspension components, adapted to wall mounted configurations. PERIMETER INTERFACES SOUND ABSORPTION Cut & wedged into oddleg channel: WALL CUT TILE WEDGED INTO ODDLEG CHANNEL (GT121 acoustic inlay Absorption FrequencyHz SPRING TEE BAR (GT115) FIXED TO WALL FULLCLIP-IN TILE NRC 0.70 Class C Absorber Shadow gap trim (ET196) into plasterboard: D278 Perforated tile 10mm plain border, 22% open area, black acoustic inlay. up to 1.00* w Up to Class A* NRC up to * WALL SPRING TEE BAR (GT115) FIXED TO WALL PLASTERBOARD BY OTHERS ET196 SHADOWGAP TRIM Mineral wool insulation Absorption FrequencyHz A2-s1, d0 (BS EN ) Please contact technical sales for further information Closure angle: WALL FULLCLIP-IN TILE CLIP-IN CLOSURE ANGLE NRC 0.95 Class A Absorber D278 Perforated tile 10mm plain border, 22% open area, 25mm thick x 45kg/m 3 density mineral wool. Aluminium foil encased and faced one side black glass tissue. SPRING TEE BAR (GT115) FIXED TO WALL FULLCLIP-IN TILE Circa 9kg/m² EDGE DETAILS None without additional measures Tile Size 300 x 300 A Edge Details F Type A Tile 5mm Bevel edges to all sides 600 x 300 Dust or vacuum with clean soft brush Wipe with clean damp sponge 600 x x x Length x x 300 Width Tiles are demountable 1800 x x x 750 Recyclable 500 x x 24 Warranty available *Performance is dependent on perforation 56 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

57 57 Nilgrid

58 For Installation guidance please refer to COMPONENT PARTS Product No. NIL 1 Splice plate Description: Splice plate 200mm long x 15.5mm x 48mm x 10mm x 0.7mm thick zintec. Bracket at 1200 maximum centres Nilgrid Nilgrid bracket Unit Weight: 0.09Kg NIL 5 NIL NIL 5 Product No. NIL 1 Description: Extruded pivot channel 60.5mm deep x 52mm wide 1.5mm thick aluminium, external faces painted to specification. Supplied in lengths of 3000mm. Closure NIL 3 cleat angle NIL 1 profile Variable 150 max Burgess Installation Instructions. Closure angle NIL 2 profile Variable 150 max Unit Weight: 2.00Kg Product No. NIL 2 Splice plate Description: 250mm long x 57.5mm x 15.5mm x 0.7mm thick zintec. Unit Weight: 0.1Kg Product No. NIL 2 Description: Extruded tee section assembly 59.5mm deep x 64mm wide x 1.5mm thick aluminium, external faces painted to specification. Supplied in lengths of 3000mm. Unit Weight: 3.95Kg up to 1.00* w Up to Class A* NRC up to D nfw /D ncw 26-42dB Product No. NIL 3 Description: Pressed pivot cleat 47mm x 44mm x 38mm x 1.6mm thick zintec, with 3mm dia hole to accept split pin. Unit Weight: 0.03Kg Product No. NIL 4 Description: Pivot collar 17mm long x 12.5mm o/d x 1.2mm thick galvanised mild steel tube, with 3.2mm dia hole to accept split pin, 22mm long x 2mm dia. GT 122 A2-s1, d0 (BS EN ) Unit Weight: 0.006kg NIL 4 collar NIL 1 profile Please contact technical sales for further information None without additional measures Product No. NIL 5 Description: Wall bracket 193mm long x 70mm deep x 1.6mm thick galvanised mild steel support bracket with adjustment slots. Supplied complete with 70mm deep x 52mm x 42mm x 2.5mm thick fixing channel with fixing holes and 3mm diameter pivot pin. Overall length 200mm. TILE REMOVAL Unit Weight: 0.325Kg Dust or vacuum with clean soft brush Wipe with clean damp sponge Tiles are demountable Product No. GT 133 Closure angle Description: 2400mm long closure angle 100 x 25 x 0.9mm zinc coated mild steel. Painted white on one exposed face. Other sizes available. EDGE DETAILS Unit Weight: 2.0Kg Recyclable Type PA Bevel 3 sides Square at NIL 1 side Type PB Bevel long side Square short sides Warranty available *Performance is dependent on perforation 58 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

59 Sequence Acoustic Range Set your imagination free with our Sequence Acoustic Range. Available in a comprehensive range of fabrics/colour, shape and size, it perfectly blends modern aesthetic requirements with great acoustic performance. 59

60 Sequence Acoustic Introduction Burgess By System s sequence range of soft fibre tiles, rafts, baffles and wall panels all offer high acoustic absorption and stunning aesthetic options. As well as excellent sound absorbers and can choose a variety of edge details, sizes and colours. Sequence wall panels, rafts and baffles can enable acoustic absorption requirements to be met without compromising air flow or thermal mass designs. Sequence wall panels can be plain-faced to an extensive range of colours, fabricfaced or fabric wrapped and can come in any length up to 2700mm and 1200mm width. Supplied in all non-luminous RAL colours and a wide variety of different shapes and design requirements can be accommodated. This range is fully compatible with Burgess By System's suspension systems for maximum peace of mind. Sequence Pearl and Sequence Shapes can offer almost unlimited design options with a variety of shapes and colours as standard. 60 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

61 2. Sequence Acoustic Range Index page Sequel Sequence Sequence db Sequence Hygiene Sequence Baffles Sequence Hygiene Baffles Sequence Raft Shapes Sequence Acoustic Rafts Sequence Hygiene Rafts Sequence Prints Sequence Shapes - wall Sequence Wall Panels Sequence Sports Wall Sequence Wave Sequence Hygiene Wall Panels Sequence Black Fabrics

62 62 Sequel

63 Sequel Sequel Manufactured from a lightweight soft fibre board, the Sequel tile offers outstanding levels of sound absorption and excellent resistance to high humidity, with a white tissue face appearance. The resilient nature of the product makes it especially suitable for use in leisure and circulation areas, where sound reverberation can be an issue. w 1.00 Class A NRC 0.90 Module Size 600x600 Grid Panel G5000 A2-s1, d0 (BS EN ) Up to 100% RH 1.2 Practical Absorption Coefficient Circa 2kg/m² (excl. grid) None without additional measures Dust or vacuum with clean soft brush Wipe with clean damp sponge Tiles are demountable Absorption 125Hz 250Hz 500Hz 1KHz 2KHz 4Khz Recyclable Warranty available 63 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

64 64 Sequence

65 Sequence Sequence Manufactured from a lightweight soft fibre board, the Sequence range offers outstanding levels of sound absorption and excellent resistance to high humidity, with a crisp clean white appearance. The resilient nature of the product makes it especially suitable for use in leisure and circulation areas, where impact resistance can be an issue. Sequence can also be used within healthcare buildings, it is compliant with HTM 60 categories 2-6 and can enable compliant with HTM acoustic guidance. Module Size 600x x600 Grid Panel Standard Tegular - w 1.00 Class A NRC 0.90 A2-s1, d0 (BS EN ) Module Size 600x600 Fine Tegular G1070 Shiplap T24 G x Up to 100% RH Circa 2kg/m² (excl. grid) 1.2 Practical Absorption Coefficient None without additional measures Dust or vacuum with clean soft brush Wipe with clean damp sponge Tiles are demountable Absorption 125Hz 250Hz 500Hz 1KHz 2KHz 4Khz Recyclable Warranty available 65 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

66 66 Sequence db

67 Sequence db Sequence db Manufactured from a combination of soft fibre and reinforced Gypsum plasterboard, Sequence db offers both outstanding acoustic absorption and attenuation performance levels. It also has a crisp, clean white appearance and high humidity resistance. The robust and resilient nature of the product makes it particularly suitable for a wide variety of applications where acoustic performance and durability are key issues. w 1.00 Class A NRC 0.90 Module Size Grid Panel Standard Tegular Fine Tegular D nfw /D ncw 42dB 600x600 G x A2-s1, d0 (BS EN ) Up to 95% RH 1.2 Circa 10.7kg/m 2 (excl. grid) None without additional measures 0.6 Dust or vacuum with clean soft brush Wipe with clean damp sponge Tiles are demountable 0.0 Absorption 125Hz 250Hz 500Hz 1KHz 2KHz 4Khz Sound absorption in accordance with ISO 354 Recyclable Warranty available 67 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

68 68 Sequence Hygiene

69 Sequence Hygiene The Sequence Hygiene ceiling tiles are manufactured from a lightweight soft fibre board and completed with a hygienic, self-sterilising, wipeable finish. This crisp, clean range also delivers outstanding levels of sound absorption, excellent resistance to high humidity and offers high impact resistance. The tile is compliant with HBN categories and can enable compliance with HTM acoustic guidance. The tile is only available in a 600 x 600 grid panel. w 1.00 Class A NRC 0.90 A2-s1, d0 (BS EN ) Module Size 600x x600 Grid Panel G Up to 100% RH Circa 2kg/m 2 s (excl. grid) Practical Absorption Coefficient None without additional measures Dust or vacuum with clean soft brush Wipe with clean damp sponge Tiles are demountable Hz 250Hz 500Hz 1KHz 2KHz 4Khz Absorption Sound absorption in accordance with ISO 354 Recyclable Warranty available 69 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

70 70 Sequence Baffles

71 Sequence Baffles Sequence Baffles The Sequence Baffles range offers stunning visual options with individually suspended vertical panels up to 2400mm. These offer outstanding acoustic absorption, yet enable air to circulate around them. Panels can be hung in rows or patterns to create a range of aesthetics. The reinforced mineral wool core and factory finished face and edges produce a strong, durable product that requires very little maintenance. Available in white as standard, with the option to match any RAL colour, as well as a selection of fabric wrapped panels. Non-standard sizing also available, please contact our technical team for details w Class A NRC 0.90 BAFFLES A2-s1, d0 (BS EN ) Up to 100% RH Circa 5kg/m 2 (excl. grid) None without additional measures Dust or vacuum with clean soft brush Wipe with clean damp sponge Tiles are demountable Recyclable Warranty available 71 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

72 Sequence Hygiene Baffles 72

73 Sequence Hygiene Baffles The Sequence Hygiene Baffles range offers stunning visual options with individually suspended vertical panels up to 2400mm. These offer outstanding acoustic absorption, yet enable air to circulate around them. Panels can be hung in rows or patterns to create a range of aesthetics. The reinforced mineral wool core and factory finished face and edges produce a strong, durable product that requires very little maintenance. Available in white as standard, with the option to match any RAL colour, as well as a selection of fabric wrapped panels. Non-standard sizing also available, please contact our technical team for details w Class A NRC 0.90 BAFFLES A2-s1, d0 (BS EN ) 1200 x 600mm cartons of 5 sequen G3000-WG-05 Up to 100% RH Circa 5kg/m 2 (excl. grid) None without additional measures Dust or vacuum with clean soft brush Wipe with clean damp sponge Tiles are demountable Recyclable Warranty available 73 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

74 Sequence Acoustic Raft - Shapes 74

75 Sequence Acoustic Raft - Shapes The Sequence Acoustic Circles range offers stunning visual options with individually suspended horizontal panels up to 2400mm. These offer outstanding acoustic absorption, yet enable air to circulate around them. Panels can be hung in rows or patterns to create a range of aesthetics. The reinforced mineral wool core and factory finished face and edges produce a strong, durable product that requires very little maintenance. Available in white as standard, with the option to match any RAL colour, as well as a selection of fabric wrapped panels. Non-standard sizing also available, please contact our technical team for details. w 1.00 Class A NRC 0.90 RAFTS A2-s1, d0 (BS EN ) Up to 100% RH Circa 2kg/m 2 (excl. grid) 1200 x 600mm cartons of 5 rafts G3000-WG x 1200 x 40mm cartons of 5 rafts G3002-WG x 1200 x 40mm cartons of 5 rafts G3109-WG x 40mm diameter circular cartons of 2 rafts G3142-WG-02 None without additional measures Dust or vacuum with clean soft brush Wipe with clean damp sponge Tiles are demountable G3000-WG-05 - suspended using 4 baffle hangers (S1920-SC) or 4 hanging kits (S1924-HK) per raft G3002-WG-05 - suspended using 4 baffle hangers (S1920-SC) or 4 hanging kits (S1924-HK) per raft G3109-WG-05 - suspended using 8 baffle hangers (S1920-SC) or 8 hanging kits (S1924-HK) per raft G3142-WG-05 - suspended using 4 baffle hangers (S1920-SC) or 4 hanging kits (S1924-HK) per raft Recyclable Warranty available 75 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

76 Sequence Acoustic Raft - Shapes The Sequence Shapes Rafts range, are Class A sound absorbing ceiling rafts which are manufactured in lots of fun shapes and sizes add another dimension of interior design possibilities to your creative toolbox. Available in over 78 colours, 28 shapes and 18 different grouping suggestions; the design potential is endless. These sound absorbing panels are 25mm thick, come in various sizes and are quick to install using a simple suspended system with spiral hooks. SHAPES 800/1150mm 2300mm 1100mm 1100mm 1150mm 1150mm 800/1150mm 2300mm 1150mm 953mm 1000mm 867mm 1000mm 1000mm 1150mm Circle 1150mm Two-part Circle 680mm Pentagon 550mm Hexagon 1000mm 867mm x 1000mm Triangle Cloud Leaf 1000mm 1000mm 800/1150mm 1150mm 1150mm 600mm 800mm 1000mm 1200mm 1150mm 1150mm 1000mm 1732mm 1000mm 1100/2600mm 2600mm 2600mm 600mm 800mm 1000mm 1200mm 1150mm 1150mm Diamond Class A in accordance with ISO 354. Ellipse Teardrop Snowman Square Shamrock Lotus meets the requirements of Class B1 for building materials according to DIN 4102, part 1 (May 1998).) FABRIC COLOURS These rafts weigh in at 3kg per m 2. SH09 SH208 SH80 SH12 SH204 SH133 SH157 SH213 SH203 SH165 SH210 SH215 minor dirt marks use a proprietary carpet spot cleaner. A small area should is not adversely affected. GROUPING IDEAS Square grouped formats None without additional measures Tiles are demountable Please contact our sales team Recyclable for the full range of shapes, groups and colours we offer. Warranty available 76 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

77 Sequence Acoustic Rafts 77

78 Sequence Rafts The Sequence Rafts range offers stunning visual options with individually suspended horizontal panels up to 2400mm. These offer outstanding acoustic absorption, yet enable air to circulate around them. Panels can be hung in rows or patterns to create a range of aesthetics. The reinforced mineral wool core and factory finished face and edges produce a strong, durable product that requires very little maintenance. Available in white as standard, with the option to match any RAL colour, as well as a selection of fabric wrapped panels. Non-standard sizing also available, please contact our technical team for details. RAFTS w 1.00 Class A NRC 0.90 A2-s1, d0 (BS EN ) Up to 100% RH 1200 x 600mm cartons of 5 rafts G3000-WG x 1200 x 40mm cartons of 5 rafts G3002-WG x 1200 x 40mm cartons of 5 rafts G3109-WG x 40mm diameter circular cartons of 2 rafts G3142-WG-02 Circa 5kg/m 2 (excl. grid) or 4 hanging kits (S1924-HK) per raft None without additional measures Dust or vacuum with clean soft brush Wipe with clean damp sponge or 4 hanging kits (S1924-HK) per raft or 8 hanging kits (S1924-HK) per raft Tiles are demountable or 4 hanging kits (S1924-HK) per raft Size variations available upon request. Recyclable Warranty available 78 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

79 Sequence Hygiene Rafts 79

80 Sequence Hygiene Rafts The Sequence Hygiene Rafts range offers stunning visual options with individually suspended horizontal panels up to 2400mm. These offer outstanding acoustic absorption, yet enable air to circulate around them. Panels can be hung in rows or patterns to create a range of aesthetics. The reinforced mineral wool core and factory finished face and edges produce a strong, durable product that requires very little maintenance. Sequence Hygiene Rafts are compliant with HTM 60 categories 2-6 and can enable compliant with HTM acoustic guidance. Available in white as standard, with the option to match any RAL colour, as well as a selection of fabric wrapped panels. Non-standard sizing also available, please contact our technical team for details. RAFTS w 1.00 Class A NRC 0.90 A2-s1, d0 (BS EN ) Up to 100% RH 1200 x 600mm cartons of 5 rafts G3000-WG x 1200 x 40mm cartons of 5 rafts G3002-WG x 1200 x 40mm cartons of 5 rafts G3109-WG x 40mm diameter circular cartons of 2 rafts G3142-WG-02 Circa 5kg/m 2 (excl. grid) or 4 hanging kits (S1924-HK) per raft None without additional measures Dust or vacuum with clean soft brush Wipe with clean damp sponge or 4 hanging kits (S1924-HK) per raft or 8 hanging kits (S1924-HK) per raft Tiles are demountable or 4 hanging kits (S1924-HK) per raft Size variations available upon request. Recyclable Warranty available 2 80 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

81 81 Sequence Prints

82 Sequence Prints The Sequence Prints range allows you to print your own photographs, artwork and designs onto high performing, sound absorbing wall panels and ceiling rafts. This range provides you with maximum creative freedom to design unique and eye catching interiors. These acoustic panels come in standard sizes and either 25mm or 40mm thickness. Easily installed with a contact adhesive or wall spiral hook system for removable panels. STANDARD SIZES 25mm or 40mm thickness 1200 x 600mm 1200 x1800mm 1200 x 900mm 1200 x 2100mm 1200 x 1200 mm 1200 x 2700mm For additional sizes contact our sales team. Sequence Prints can be manufactured to the size required to suit your requirements; up to a maximum panel size of 2700 x 1200mm. Class A for 50mm panels and Class C for 25mm, in accordance with ISO 354. ACOUSTIC PERFORMANCE Class A Acoustic Absorber - 40mm Thickness Acoustic Performance BS EN ISO 354: Frequency (Hz) Class C Acoustic Absorber - 25mm Thickness Acoustic Performance BS EN ISO 354:2003 meets the requirements of Class B1 for building materials according to DIN 4102, part 1) These panels weigh in at 3.5kg per m 2 for the 25mm thickness; 50mm thickness panels weigh 4.5kg per m Frequency (Hz) Higher absorption can be achieved when installed with a cavity Unique printed fabric with image of your choice. carpet spot cleaner. A small area should is not adversely affected. None without additional measures Thickness: 25mm (Class C Sound Absorption) 40mm (Class A Sound Absorption) Tiles are demountable Sound absorbing core Recyclable Warranty available 82 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

83 Sequence Shapes - Wall 83

84 Sequence Shapes - Wall The Sequence Shapes Wall range of acoustic wall panels reduce echo and reverberation, with a Class B sound absorption. These slimline 50mm panels come in a range of colours and shapes, which can be fixed directly to the wall using a contact adhesive. Available in over 45 colours, 8 core shapes and 8 different themes; mix and match to achieve your interior design vision. THEMES FABRIC COLOURS Theme 1 Theme 2 Theme 3 Theme 4 SH80 SH12 SH204 SH133 SH157 SH213 SH203 SH165 SH210 Theme 5 Theme 6 Theme 7 Theme 8 Class B in accordance with ISO 354 Please contact our sales team for the full range of shapes and colours we offer. 7. The polyether foam offers BS 5853: Part 2: Ignition source 5 (Crib 5) SHAPES Circles The Clip In system weighs approximately 25kg per m 3 460mm 765mm Splat 1100mm minor dirt marks use a proprietary carpet spot cleaner. A small area should Squares 1100mm is not adversely affected 460mm 460mm 765mm 1100mm 1100mm 765mm 1100mm None without additional measures Stones Bubble Tiles are demountable 460mm 765mm 1100mm 1100mm 460mm Recyclable 765mm 1100mm 580mm Warranty available 84 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

85 85 Sequence Wall Panels

86 Sequence Wall Panels The Sequence range of wall panels offer outstanding acoustic absorption and excellent design options. The panel themselves are 40mm thick resin bonded mineral wool and they can be covered with either a contemporary white painted finish or a number of different durable colour fabric finishes. The panels slot into either a steel or aluminium framing system, in either a black or white polyster powder coated finish. Panels can be cut and shaped to suit almost any design, offering unlimited aesthetic options. SEQUENCE w 1.00 Class A NRC 0.90 Grid Panel A2-s1, d0 (BS EN ) Up to 100% RH 2700 x600 x 40mm cartons of 5 panels G2000-WG-05 Non-standard sizing also available, please contact our technical team for details. Circa 2kg/m 2 (excl. grid) None without additional measures Available in white as standard, with the option to match any RAL colour, as well as a selection of fabric faced or fabric wrapped panels. Dust or vacuum with clean soft brush Wipe with clean damp sponge Tiles are demountable Recyclable Warranty available 86 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

87 Sequence Sports Wall Panels 87

88 Sequence Sports Wall Panels The Sequence range of wall panels offer outstanding acoustic absorption and excellent design options. The panel themselves are 40mm thick resin bonded mineral wool and they can be covered with either a contemporary white painted finish or a number of different durable colour fabric finishes. The panels slot into either a steel or aluminium framing system, in either a black or white polyester powder coated finish. Panels can be cut and shaped to suit almost any design, offering unlimited aesthetic options. SEQUENCE w 1.00 Class A NRC 0.90 Grid Panel A2-s1, d0 (BS EN ) 2700 x600 x 40mm cartons of 4 panels G2000 Non-standard sizing also available, please contact our technical team for details. Up to 95% RH Circa 2kg/m 2 (excl. grid) other colours available upon request. None without additional measures Dust or vacuum with clean soft brush Wipe with clean damp sponge Tiles are demountable Recyclable Warranty available 88 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

89 89 Sequence Wave

90 Sequence Wave The Sequence Wave range offers stunning visual options with individually suspended vertical panels up to 2400mm. These offer outstanding acoustic absorption, yet enable air to circulate around them. Panels can be hung in rows or patterns to create a range of aesthetics. The reinforced mineral wool core and factory finished face and edges produce a strong, durable product that requires very little maintenance. Available in white as standard, with the option to match any RAL colour, as well as a selection of fabric wrapped panels. Non-standard sizing also available, please contact our technical team for details w Class A NRC 0.90 A2-s1, d0 (BS EN ) WAVE PANELS Up to 100% RH Circa 5kg/m 2 (excl. grid) None without additional measures Dust or vacuum with clean soft brush Wipe with clean damp sponge Tiles are demountable Recyclable Warranty available 90 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

91 Sequence Hygiene Wall Panels 91

92 Sequence Hygiene Wall Panels The Sequence Hygiene Wall Panels combine outstanding acoustic absorption with anti bacterial properties. They have been independently tested to resist the growth of MRSA and E-coli as well as offering high humidity resistance making them ideal for most hygienic environments. The panel themselves are 40mm thick mineral wool and they are face fiinished in white. As standard, the panels slot into an aluminium framing system but direct fix options can be offered. Panels can be cut and shaped to suit almost any design, offering unlimited aesthetic options. SEQUENCE Grid Panel 2700 x600 x 40mm cartons of 5 panels Non-standard sizing also available, please contact our technical team for details. Available in white only. Any size variation available w Class A NRC 0.90 A2-s1, d0 (BS EN ) Up to 95% RH Circa 2kg/m 2 (excl. grid) None without additional measures Dust or vacuum with clean soft brush Wipe with clean damp sponge Tiles are demountable Recyclable Warranty available 92 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

93 93 Sequence Black

94 Sequene Black Designed especially for use in cinemas and other areas requiring a ceiling that offers high acoustic performance, both attenuation and absorption, which is also economical. w 1.00 Class A NRC 0.90 Module Size 600x600 Grid Panel Standard Tegular 1200x600 - A2-s1, d0 (BS EN ) Up to 100% RH Circa 2kg/m 2 (excl. grid) 1.2 Practical Absorption Coefficient None without additional measures Dust or vacuum with clean soft brush Wipe with clean damp sponge Tiles are demountable Recyclable Absorption 125Hz 250Hz 500Hz 1KHz 2KHz 4Khz Sound absorption in accordance with ISO 354 Warranty available 94 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

95 95 Fabrics

96 Fabrics Camira fabrics make the grade for schools, colleges and universities, providing inspirational designs and first-class performance. 96 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

97 Lucia Adobo YB165 Turtle Arec ibo Madura YB156 Apple Bermuda Marianna YB157 Campeche Steel Bluebell Windjammer YB047 Montserrat YB011 YB021 Mauve Taboo YB045 Scuba Curacao YB005 Martinique YB004 Sombrero YB046 Costa YB026 Ocean YB100 Cayman YB024 97

98 Lucia Rum Oyster YB107 Reef Aruba Solano Slip Sandstorm Tortuga Lobster Buru YB170 Diablo YB101 Belize YB105 Jamaica YB027 Blizzard Tequila Bridgetown YB102 Calypso YB106 Paseo Tarot Tobago Havana 98 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

99 Lucia CS Varadero LC434 Adobo LC165 Aruba LC108 Medan LC422 Rum LC173 Bima LC425 Depok LC421 Honduras LC455 Slip LC094 Kota LC415 Tenom LC419 Blanquilla LC456 Blizzard LC081 Panama LC079 Roques LC433 Palu LC414 Revive LC182 Negril LC175 Makili LC424 Costa LC026 Havana LC The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

100 Racer Dart NU044 Medal NU045 Dash Nutrition Ribbon NU047 Plunge NU016 Energy NU026 Pace NU005 Gain NU046 Track NU007 Bolt NU022 Victory NU032 Silver Train NU027 Focus NU037 Baton NU003 Block Stride NU023 Line NU033 Challenger NU021 Chase NU

101 Blazer CUZ47 Wesley CUZ82 Dunhurst CUZ58 Ulster CUZ1F Bath CUZ1D Durham CUZ14 Dollar CUZ84 Butterstone CUZ83 Keil CUZ85 Lancaster CUZ1C Latymer CUZ33 St Andrews CUZ86 Aberdeen CUZ87 Starley CUZ88 Goldsmith CUZ39 Newport CUZ1L Trevelyan CUZ31 Rockport CUZ89 Edge Hill CUZ90 Oriel CUZ18 Bryanston CUZ53 Aston CUZ02 Kingsmead CUZ67 Magdalene CUZ21 Handcross CUZ63 Camphill CUZ1K Belhaven CUZ1H City CUZ1A Imperial CUZ1B Wellington CUZ13 Kimbolton CUZ66 Glasgow CUZ1M CUZ1N 101 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

102 Blazer Napier CUZ08 CUZ1T Silverdale CUZ28 Brighton CUZ1Q Manchester CUZ1V Glenalmond CUZ62 Bromsgrove CUZ35 Plymouth CUZ1R Surrey CUZ1E Newcastle CUZ1W St Martins CUZ1X Sussex CUZ1U Edinburgh CUZ1Y Balliol CUZ24 Nottingham CUZ1S Exeter CUZ1Z Loughborough CUZ2A Eastbourne CUZ46 Collingwood CUZ27 Oxford CUZ09 Banbridge CUZ32 Aberlour CUZ1J Hull CUZ1P Salford CUZ1G Knightsbridge CUZ26 Silcoates CUZ30 Winchester CUZ12 102

103 Blazer Lite Daydream LTH46 Love LTH47 Bliss LTH48 Angel Hope LTH50 Graceful LTH51 Tender LTH53 Aspire LTH52 Praise LTH54 Buddah LTH56 Happy LTH55 Verity LTH57 Devoted LTH58 Worship Shelter LTH The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

104 Blazer Lite Blazer Lite True LTH61 Harmony LTH63 Pillow LTH43 Balance LTH41 Dainty LTH64 Pastel LTH65 Faith LTH68 Cuddle LTH62 Wish LTH67 Pamper LTH66 Retreat Solace LTH70 Haven LTH40 Freedom Mood LTH44 Hush LTH42 True LTH61 Harmony LTH63 Pillow LTH43 Balance LTH41 Dainty LTH64 Pastel LTH65 Faith LTH68 Cuddle LTH62 Wish LTH67 Pamper LTH66 Retreat Solace LTH70 Haven LTH40 Freedom Mood LTH44 Hush LTH42 104

105 Cara Lomond EJ192 Glass EJ004 Clan EJ169 Vit EJ184 Beltane EJ193 Shetland EJ191 Hillswick EJ190 Denny EJ196 Maree EJ195 Chaucer EJ172 Ronay EJ189 Easdale EJ188 Austen EJ173 Spray EJ033 Lora EJ187 Dolphin EJ105 Lerwick EJ194 Portland EJ016 Fair Isle EJ186 Inverness EJ175 Lead EJ104 Staffa EJ185 Galilee EJ125 Adriatic EJ154 Lossie EJ197 Merrick EJ048 Carron EJ015 Cluanie EJ180 Tummel EJ038 Pitlochry EJ076 Walten EJ011 Black EJ The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

106 Mineral Range High-performing range of mineral ceiling tiles which add a contemporary touch to any project. Available in many patterns, textures and performance levels. Suitable for all types of projects. 106

107 Mineral Introduction Burgess By System s mineral range contains a wide collection of face patterns, edge details and technical performance to offer maximum flexibility to the specifier and installer. Durable standard baseboard, ensures good handling properties while being easy to install and cut. The Classcare range has been specifically developed to work within educational buildings and contribute to compliance with Building Bulletin guidelines. Our Healthcare range has excellent antibacterial properties and has been successfully utilised in some of the UK s largest hospital projects. db products offer enhanced sound attenuation properties, as well as being able to provide sound absorption where required. The mineral range contains solutions for almost every budget and are compatible with Burgess By System's suspension systems. 107 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

108 3. Mineral Ceilings Range Index page Healthcare Plain Healthcare Plain db Healthcare Perforated Healthcare Perforated db Healthcare Plus Healthcare Plus db Acoustique Acoustique db Classcare Classcare db Classcare Plain Classcare Plus Classcare Plus db Classcare Needlepoint Random Fissured Solitex Plain Solitex Plain db Solitex Perforated Solitex Perforated db 108 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

109 109 Healthcare Plain

110 Healthcare Plain Healthcare Plain The modern light textured finish is enhanced by a coating that is not only cleanable but self sterilising making it particularly suitable for healthcare and hygiene related situations. Healthcare Plain utilises Burgess By System s robust mineral baseboard which enables easy handling whilst reducing damage. w 0.25 Class E NRC 0.25 D nfw /D ncw 34dB Module Size Grid Panel Standard Tegular Fine Tegular 600x600 A2-s1, d0 (BS EN ) 1200x Up to 90% RH 1.2 Practical Absorption Coefficient Circa 3.5kg/m 2 (excl. grid) None without additional measures Dust or vacuum with clean soft brush Wipe with clean damp sponge Tiles are demountable Absorption 125Hz 250Hz 500Hz 1KHz 2KHz 4Khz Sound absorption in accordance with ISO 354 Recyclable Warranty available 110 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

111 111 Healthcare Plain db

112 Healthcare Plain db Healthcare Plain db has a modern light textured finish, enhanced by a coating that is not only cleanable but self sterilising making it particularly suitable for healthcare and hygiene related situations. The durable, robust mineral baseboard also enables high acoustic attenuation. Healthcare Plain db can offer compliance with HBN guidelines. w 0.25 Class E NRC 0.25 D nfw /D ncw 39dB Module Size Grid Panel Standard Tegular Fine Tegular 600x600 A2-s1, d0 (BS EN ) 1200x Up to 95% RH Circa 5.5kg/m 2 (excl. grid) 1.2 Practical Absorption Coefficient None without additional measures Dust or vacuum with clean soft brush Wipe with clean damp sponge Tiles are demountable Recyclable 0.0 Absorption 125Hz 250Hz 500Hz 1KHz 2KHz 4Khz Sound absorption in accordance with ISO 354 Warranty available 112 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

113 113 Healthcare Perforated

114 Healthcare Perforated Healthcare Perforated Healthcare Perforated combines Class C acoustic absorption with a cleanable, antibacterial surface making it ideal for hospitals and healthcare buildings. The robust mineral baseboard is easy to handle and minimises damage whilst the surface inhibits the growth of bacteria, yeast and fungi. w 0.60 Class C NRC 0.65 D nfw /D ncw 34dB Module Size Grid Panel Standard Tegular Fine Tegular 600x600 A2-s1, d0 (BS EN ) 1200x Up to 90% RH Circa 3.5kg/m 2 (excl. grid) Practical Absorption Coefficient None without additional measures Dust or vacuum with clean soft brush Wipe with clean damp sponge Tiles are demountable Absorption 125Hz 250Hz 500Hz 1KHz 2KHz 4Khz Sound absorption in accordance with ISO 354 Recyclable Warranty available 114 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

115 Healthcare Perforated db 115

116 Healthcare Perforated db Healthcare Perforated db is perfect for hygienic areas requiring acoustic control and privacy. The modern lightly textured finish is enhanced by a coating that is not only cleanable but self sterilising making it particularly suitable for healthcare and hygiene related situations. The tough mineral baseboard minimises damages in what are often heavily accessed ceilings. w 0.65 Class C NRC 0.65 D nfw /D ncw 39dB Module Size Grid Panel Standard Tegular Fine Tegular 600x600 A2-s1, d0 (BS EN ) 1200x Up to 95% RH Practical Absorption Coef cient Circa 5.5kg/m 2 (excl. grid) None without additional measures Dust or vacuum with clean soft brush 0.4 Wipe with clean damp sponge 0.2 Tiles are demountable 0.0 Absorption 125Hz 250Hz 500Hz 1KHz 2KHz 4Khz Sound absorption in accordance with ISO 354 Recyclable Warranty available 116 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

117 117 Healthcare Plus

118 Healthcare Plus Healthcare Plus is designed specifically for healthcare and hygiene related applications. The tough reinforced tissue face also enables high levels of acoustic performance whilst offering a smooth, antibacterial, cleanable and unperforated surface. w 0.60 Class C NRC 0.55 Module Size 600x600 Grid Panel Standard Tegular Fine Tegular 1200x D nfw /D ncw 34dB A2-s1, d0 (BS EN ) Up to 90% RH Practical Absorption Coefficient Circa 3.5kg/m 2 (excl. grid) None without additional measures Dust or vacuum with clean soft brush Wipe with clean damp sponge 0.0 Absorption 125Hz 250Hz 500Hz 1KHz 2KHz 4Khz Sound absorption in accordance with ISO 354 Tiles are demountable Warranty available 118 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

119 119 Healthcare Plus db

120 Healthcare Plus db Healthcare Plus db is an extremely high performance product, designed specifically for healthcare and hygiene related applications. It fully complies with the HBN Part B design guidelines. The tough reinforced tissue face also enables high levels of acoustic performance whilst offering a smooth unperforated surface. w 0.60 Class C NRC 0.55 Module Size Grid Panel Standard Tegular Fine Tegular 600x600 D nfw /D ncw 39dB 1200x A2-s1, d0 (BS EN ) Up to 95% RH Practical Absorption Coefficient Circa 5.5kg/m 2 (excl. grid) None without additional measures Dust or vacuum with clean soft brush Wipe with clean damp sponge 0.0 Absorption 125Hz 250Hz 500Hz 1KHz 2KHz 4Khz Sound absorption in accordance with ISO 354 Tiles are demountable Warranty available 120 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

121 121 Acoustique

122 Acoustique Acoustique is designed for a multitude of spaces. It offers Class C acoustic absorption making it suitable for communal spaces, education buildings and commercial works. It has a tough, bright painted tissue face which enhances scratch and face damage resistance. Acoustique tiles can be cleaned and have an antibacterial finish. w 0.60 Class C NRC 0.55 Module Size Grid Panel Standard Tegular Fine Tegular 600x600 D nfw /D ncw 34dB 1200x A2-s1, d0 (BS EN ) Up to 90% RH 1.2 Practical Absorption Coefficient Circa 3.5kg/m 2 (excl. grid) None without additional measures Dust or vacuum with clean soft brush 0.2 Tiles are demountable 0.0 Absorption 125Hz 250Hz 500Hz 1KHz 2KHz 4Khz Sound absorption in accordance with ISO 354 Recyclable Warranty available 122 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

123 123 Acoustique db

124 Acoustique db The Acoustique db tile is an extremely high performance acoustic product. Excellent absorption and attenuation are achieved by an acoustically transparent finish on a high density baseboard that also ensures good handle-ability. The acoustic performance together with a clean crisp finish makes this product suitable for use in almost any environment. w 0.60 Class C NRC 0.55 Module Size Grid Panel Standard Tegular Fine Tegular D nfw /D ncw 39dB 600x x A2-s1, d0 (BS EN ) Other sizes available, please contact our technical sales team for more information. Up to 95% RH Practical Absorption Coef cient 1.2 Circa 5.5kg/m 2 (excl. grid) None without additional measures Dust or vacuum with clean soft brush 0.2 Tiles are demountable 0.0 Absorption 125Hz 250Hz 500Hz 1KHz 2KHz 4Khz Sound absorption in accordance with ISO 354 Recyclable Warranty available 124 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

125 125 Classcare

126 Classcare Classcare has a modern lightly textured finish and is ideally suited to most educational suspended ceiling situations. Classcare offers Class C absorption to help control reverberation and comes in a variety of edge details for aesthetics. The clean finish helps create a bright environment and the robust baseboard enables easy handling and helps reduce damage. w 0.60 Class C NRC 0.65 Module Size Grid Panel Standard Tegular Fine Tegular D nfw /D ncw 34dB 600x x A2-s1, d0 (BS EN ) Up to 90% RH 1.2 Practical Absorption Coefficient Circa 3.5kg/m 2 (excl. grid) None without additional measures Dust or vacuum with clean soft brush Wipe with clean damp sponge Recyclable Absorption 125Hz 250Hz 500Hz 1KHz 2KHz 4Khz Sound absorption in accordance with ISO 354 Warranty available 126 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

127 127 Classcare db

128 Classcare db Classcare db has a modern lightly textured finish and is ideally suited to areas requiring all round acoustic performance. Classcare also has excellent room to room sound attenuation properties for use where high privacy levels are required. The surface micro perforations virtually disappear when installed, giving the benefit of high acoustic absorption. w 0.65 Class C NRC 0.65 D nfw /D ncw 39dB Module Size Grid Panel Standard Tegular Fine Tegular 600x600 A2-s1, d0 (BS EN ) 1200x Up to 95% RH 1.2 Practical Absorption Coefficient Circa 5.5kg/m 2 (excl. grid) 1.0 None without additional measures Dust or vacuum with clean soft brush Wipe with clean damp sponge Tiles are demountable Absorption 125Hz 250Hz 500Hz 1KHz 2KHz 4Khz Sound absorption in accordance with ISO 354 Recyclable Warranty available 128 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

129 129 Classcare Plain

130 Classcare Plain Classcare Plain has a modern lightly textured finish and is ideally suited to retail suspended ceiling situations. The clean finish helps create a bright environment and the robust baseboard enables easy handling and helps reduce damage. w 0.25 Class E NRC 0.25 Module Size 600x x600 Grid Panel - Standard Tegular Fine Tegular D nfw /D ncw 34dB A2-s1, d0 (BS EN ) Practical Absorption Coefficient Up to 90% RH Circa 3.5kg/m 2 (excl. grid) None without additional measures Dust or vacuum with clean soft brush 0.0 Absorption 125Hz 250Hz 500Hz 1KHz 2KHz 4Khz Sound absorption in accordance with ISO 354 Recyclable Warranty available 130 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

131 131 Classcare Plus

132 Classcare Plus Classcare Plus is specifically deisgned for education buildings and spaces. It has a tough bright painted tissue face which enhances scratch and face damage resistance. Classcare Plus offers Class C sound absorption to help reduce reverberation times and enable compliance with Building Bulletin guidelines. It also has an antibacterial finish. w 0.60 Class C NRC 0.55 Module Size Grid Panel Standard Tegular Fine Tegular 600x600 D nfw /D ncw 34dB 1200x A2-s1, d0 (BS EN ) Up to 90% RH Practical Absorption Coefficient Circa 3.5kg/m 2 (excl. grid) None without additional measures Dust or vacuum with clean soft brush Wipe with clean damp sponge 0.0 Absorption 125Hz 250Hz 500Hz 1KHz 2KHz 4Khz Sound absorption in accordance with ISO 354 Tiles are demountable Warranty available 132 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

133 133 Classcare Plus db

134 Classcare Plus db Classcare Plus db utilises the same durable baseboard as Classcare db tiles, but with an acoustic fleece bonded to the face. This creates a clean, crisp unbroken surface suitable for almost any environment, without detracting from the impressive all round acoustic performance. Classcare Plus db tiles can also be easily cleaned and have an antibacterial finish. w 0.60 Class C NRC 0.55 Module Size Grid Panel Standard Tegular Fine Tegular 600x600 D nfw /D ncw 39dB 1200x A2-s1, d0 (BS EN ) Up to 95% RH Practical Absorption Coefficient Circa 5.5kg/m 2 (excl. grid) None without additional measures Dust or vacuum with clean soft brush Wipe with clean damp sponge 0.0 Absorption 125Hz 250Hz 500Hz 1KHz 2KHz 4Khz Sound absorption in accordance with ISO 354 Tiles are demountable Warranty available 134 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

135 135 Classcare 19

136 Classcare 19 Classcare 19 is manufactured from a specially designed 19mm thick baseboard to provide a unique combination of both high acoustic absorption and sound attenuation. This enables a reduction in both reverberation times and an enhancement of speech privacy. Classcare 19 has a lightly textured, perforated, contemporary finish. w 0.90 Class A NRC 0.85 Module Size Grid Panel Standard Tegular Fine Tegular D nfw /D ncw 39dB 600x x A2-s1, d0 (BS EN ) Up to 90% RH Sound Absorption Coef cient Circa 5.5kg/m 2 (excl. grid) None without additional measures Absorption Coefficient Dust or vacuum with clean soft brush Wipe with clean damp sponge Frequency, Hz Tiles are demountable Recyclable Warranty available 136 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

137 137 Needlepoint

138 Needlepoint Needlepoint s highly perforated face pattern provides excellent sound absorbency in offices, retail, circulation areas, banks and similar areas where noise reduction is a prime requirement. Needlepoint is manufactured from a robust, easy to handle mineral baseboard. w 0.70 Class C NRC 0.70 Module Size Grid Panel Standard Tegular Fine Tegular D nfw /D ncw 34dB 600x x A2-s1, d0 (BS EN ) Up to 90% RH Practical Absorption Coef cient 1.2 Circa 3.5kg/m 2 (excl. grid) None without additional measures Dust or vacuum with clean soft brush 0.2 Tiles are demountable 0.0 Absorption 125Hz 250Hz 500Hz 1KHz 2KHz 4Khz Sound absorption in accordance with ISO 354 Recyclable Warranty available 138 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

139 139 Random Fissured

140 A modern Random Fissured appearance for use in shops, schools, circulation areas and all situations requiring noise control within a strict budget. Random Fissured is made from a robust, easy to handle baseboard and offers excellent value for money. Random Fissured Random Fissured w 0.70 Class C NRC 0.70 Module Size Grid Panel Standard Tegular Fine Tegular D nfw /D ncw 34dB 600x x A2-s1, d0 (BS EN ) Up to 70% RH Practical Absorption Coef cient 1.2 Circa 3.5kg/m 2 (excl. grid) None without additional measures Dust or vacuum with clean soft brush 0.2 Tiles are demountable 0.0 Absorption 125Hz 250Hz 500Hz 1KHz 2KHz 4Khz Sound absorption in accordance with ISO 354 Recyclable Warranty available 140 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

141 141 Solitex Plain

142 Solitex Plain Solitex Plain offers a modern, finely textured surface with a bright white finish. The robust, easy to handle mineral board ensures minimal damage and a crisp clean appearance. There are a range of edge details for different aesthetic options. w 0.25 Class E NRC 0.25 D nfw /D ncw 34dB Module Size Grid Panel Standard Tegular Fine Tegular 600x600 A2-s1, d0 (BS EN ) 1200x Up to 90% RH Circa 3.5kg/m 2 (excl. grid) Practical Absorption Coef cient 1.2 None without additional measures Dust or vacuum with clean soft brush 0.6 Wipe with clean damp sponge Tiles are demountable Recyclable 0.0 Absorption 125Hz 250Hz 500Hz 1KHz 2KHz 4Khz Sound absorption in accordance with ISO 354 Warranty available 142 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

143 143 Solitex Plain db

144 Solitex Plain db The lightly textured appearance makes Solitex Plain db suitable for use in most high profile areas that will also benefit from the unique baseboard structure which gives outstanding performance in terms of acoustics and handle-ability. w 0.25 Class E NRC 0.25 D nfw /D ncw 39dB Module Size Grid Panel Standard Tegular Fine Tegular 600x600 A2-s1, d0 (BS EN ) 1200x Up to 95% RH Circa 5.5kg/m 2 (excl. grid) Practical Absorption Coefficient None without additional measures Dust or vacuum with clean soft brush Wipe with clean damp sponge Tiles are demountable 0.0 Absorption 125Hz 250Hz 500Hz 1KHz 2KHz 4Khz Sound absorption in accordance with ISO 354 Recyclable Warranty available 144 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

145 145 Solitex Perforated

146 Solitex Perforated Solitex Perforated has the same bright white, finely granulated surface as the plain version but with fine perforations which virtually disappear when viewed in an installed condition. These enable the product to have Class C absorption making it suitable for communal areas, offices and educational premises. w 0.65 Class C NRC 0.65 D nfw /D ncw 34dB Module Size 600x600 Grid Panel Standard Tegular Fine Tegular 1200x A2-s1, d0 (BS EN ) Up to 90% RH Circa 3.5kg/m 2 (excl. grid) Practical Absorption Coefficient None without additional measures Dust or vacuum with clean soft brush Tiles are demountable 0.0 Absorption 125Hz 250Hz 500Hz 1KHz 2KHz 4Khz Sound absorption in accordance with ISO 354 Recyclable Warranty available 146 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

147 147 Solitex Perforated db

148 Solitex Perforated db Solitex Perforated db Solitex Perforated db has the normal, bright white finely granulated surface that is associated with this design but with the addition of small surface perforations. Virtually invisible when the ceiling is installed, they help provide the Class C sound absorption that compliments the high room to room airborne sound reduction that can be achieved with this product. w 0.65 Class C NRC 0.65 Module Size Grid Panel Standard Tegular Fine Tegular D nfw /D ncw 39dB 600x x A2-s1, d0 (BS EN ) Up to 95% RH 1.2 Practical Absorption Coefficient Circa 5.5kg/m 2 (excl. grid) None without additional measures Dust or vacuum with clean soft brush Tiles are demountable Absorption 125Hz 250Hz 500Hz 1KHz 2KHz 4Khz Sound absorption in accordance with ISO 354 Recyclable Warranty available 148 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

149 Gypsum Plasterboard Range High-performing plasterboard ceiling tiles can add a contemporary touch to any project. Available in many patterns, textures and performance levels. Suitable for all types of projects. 149

150 Gypsum plasterboard introduction A specially developed plasterboard core provides excellent handling characteristics, making it perfectly suited for areas requiring regular access. The core also enables easy integration of ceiling mounted services, cutting and installation. The Gypsum plasterboard ceilings tiles are compatible with all Burgess By System' suspension systems. The Metroboard range of perforated Gypsum tiles offer a circular, square and linear designer perforation pattern, while retaining acoustic performance. Robust, cleanable and hygienic with the Cleancare range. Cleancare comes with a foil backing as standard, as well as fully taped edges enhancing resistance to minor void leaks and condensation. Packed and delivered in cartons to improve handling and resistance to site damage. 150 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

151 4. Gypsum Plasterboard Range Index page Cleancare Cleancare Hygiene Metroboard Circle Metroboard Line Metroboard Square Metroboard Edge Plain Wipedown Concor Panels

152 152 Cleancare

153 Cleancare Cleancare With a specially formulated, attractive vinyl face, laminated to a tough plasterboard base, Cleancare has been designed for use in food related, and other situations where a high level of hygiene is paramount. The strong vinyl face is designed for easy, regular cleaning, but still retains a Class 0 fire classification. Cleancare is also suitable for use in hospitals, toilets, washrooms and other similar areas. Module Size 600x x600 Grid Panel Standard Tegular Fine Tegular D nfw /D ncw 36dB B2-s1, d0 (BS EN ) Up to 95% RH Circa 6kg/m 2 (excl. grid) None without additional measures Dust or vacuum with clean soft brush Wipe with clean damp sponge Tiles are demountable 153 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

154 154 Cleancare Hygiene

155 Cleancare Hygiene With a cleanable, smooth vinyl face, laminated to a tough plasterboard base, Cleancare Hygiene has been designed for use in situations where a high level of hygiene and durability is needed. The strong vinyl face is designed for easy, regular cleaning, but still retains a Class 0 fire classification and each tile has a foil backing. Cleancare Hygiene is also suitable for use in retail, hospitals, toilets, washrooms and other similar areas. Module Size Grid Panel Standard Tegular Fine Tegular 600x D nfw /D ncw 38dB 1200x B2-s1, d0 (BS EN ) Up to 95% RH Circa 5kg/m 2 (excl. grid) None without additional measures Dust or vacuum with clean soft brush Wipe with clean damp sponge Tiles are demountable Recyclable 155 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

156 156 Metroboard Circle

157 Metroboard Circle Metroboard is a new generation of ceiling tile. For a contemporary look with real design appeal, choose Metroboard Circle. Light, easy to handle, yet highly durable, this modern acoustic tile is created from specially developed reinforced plasterboard and has precision cut edges - offering a crisp, clean finish, as well as a wide range of visual options. The beauty of Metroboard Circle isn t simply skin deep. Its contemporary circular perforation doesn t just look great, it offers excellent acoustic qualities too w 0.65 Class C NRC 0.70 Metroboard Grid Panel Standard Tegular Fine Tegular D nfw /D ncw 34dB Square Circle Line A2-s1, d0 (BS EN ) Edge Up to 70% RH Circa 8.5kg/m 2 (excl. grid) None without additional measures Dust or vacuum with clean soft brush Wipe with clean damp sponge Sound absorption coefficient ( s) Frequency (Hz) Tiles are demountable Recyclable 157 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

158 158 Metroboard Line

159 Metroboard Line Metroboard Line is visually stunning and offers excellent Class C acoustic absorption. This makes Metroboard Line ideally suited to communal residential areas, teaching spaces and the modern office. Metroboard Line provides the perfect balance of performance and design style. With a Gypsum plasterboard core it s really light to work with, and has acoustic fleece backing which offers excellent sound absorption w 0.65 Class C NRC 0.70 Metroboard Square Grid Panel Standard Tegular Fine Tegular Circle D nfw /D ncw 34dB Line Edge A2-s1, d0 (BS EN ) 1.2 Up to 70% RH Circa 8.5kg/m 2 (excl. grid) None without additional measures Sound absorption coefficient ( s) Dust or vacuum with clean soft brush Frequency (Hz) Wipe with clean damp sponge Tiles are demountable Recyclable 159 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

160 160 Metroboard Square

161 Metroboard Square Metroboard Square brings fresh modern appeal to any design, and any space. Factory applied acoustic fleece enhances sound absorption, whilst precisely manufactured continuous perforations maximise style. With its robust plasterboard core, contemporary square perforated design and bright white finish, Metroboard Square is ideal for environments which demand high performance. Outstanding sound absorption, good fire performance and complete accessibility are inherent benefits of the Metroboard range w 0.65 Class C NRC 0.70 Metroboard Grid Panel Standard Tegular Fine Tegular D nfw /D ncw 34dB Square Circle A2-s1, d0 (BS EN ) Line Edge Up to 70% RH 1.2 Circa 8.5kg/m 2 (excl. grid) None without additional measures Dust or vacuum with clean soft brush Wipe with clean damp sponge Sound absorption coefficient ( s) Frequency (Hz) Tiles are demountable Recyclable 161 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

162 162 Metroboard Edge

163 Metroboard Edge Metroboard Edge provides the finishing touch to Metroboard s Line, Circle or Square patterns. Metroboard Edge is a bright, white, painted Gypsum plasterboard tile which removes the need for cutting through perforations on site. Metroboard Edge can be used in conjunction with all perforated tiles, to form stunning design patterns and features. Made from the same robust, dense Gypsum core as other Metroboard products, with the same edge profiles and dimensions, Metroboard Edge enables seamless transitions to be created, whilst retaining durability. Metroboard Grid Panel Standard Tegular Fine Tegular Square D nfw /D ncw 38dB Circle Line Edge A2-s1, d0 (BS EN ) Up to 70% RH Circa 8.5kg/m 2 (excl. grid) None without additional measures Dust or vacuum with clean soft brush Wipe with clean damp sponge Tiles are demountable Recyclable 163 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

164 164 Plain Wipedown

165 Plain Wipedown Based on specially developed reinforced Gypsum plasterboard, Plain Wipedown is suitable for use in most locations requiring a smooth, economical ceiling finish. A specially developed plasterboard core provides excellent handling characteristics and the products are especially suited to areas requiring more regular access. Their high light reflectance is of particular value in retail situations. Module Size Grid Panel Standard Tegular Fine Tegular 600x600 D nfw /D ncw 38dB 1200x A2-s1, d0 (BS EN ) Up to 95% RH Circa 6kg/m 2 (excl. grid) None without additional measures Dust or vacuum with clean soft brush Wipe with clean damp sponge Tiles are demountable Recyclable 165 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

166 166 ConCor panels

167 ConCor Panels Since its introduction ConCor has set the quality standard by which other partitioning panels are judged. The ConCor panel is primarily used in jointless and system wall partitioning applications. It is a rigid structure, lightweight panel with a high degree of flexibility. All ConCor panels are supplied on non-returnable, nonchargeable pallets, saving on administration costs and return transport. Panel height 2400mm 2700mm 3000mm Panel width 1200mm 1200mm 1200mm Weight per Panel 46kg 52kg 58kg Weight per Pack 921kg 1037kg 1152kg Thickness 46mm 46mm 46mm BS476 Part 22 : 1987 Vented honeycomb core Circa 16kg/m 2 Recyclable 167 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

168 Lighting index page Clip in LED

169 169 Clip In LED

170 Clip In LED Clip In LED tiles fit flush into the concealed grid system, providing a slim and flawless finish. These tiles have been designed specifically for the Burgess By System clip in system and can be supplied with the frame or on their own. Frames are available in any colour and the LED lights are Neutral White as standard; although other colours can be supplied on request. GT114 SUSPENSION ANGLE GT112 SUSPENSION CHANNEL LED AND FRAME DETAILS Partcode LT4001 A System Concealed Clip In Frame colour PPC RAL % gloss Frame and LED weight Grid system LED power Colour temperature 5kg H4 40W Neutral White 4000K GT109 TEE BAR BRACKET GT115 FULL TEE BAR LED LIGHT FITTING SITTING INTO THE BACK OF CLIP-IN TILE WITH CUTOUT REGULAR 600 X 600 CLIP-IN TILES Frame dimensions 600 x 600mm LED dimensions 595 x 595 x 7.5mm LED driver Philips driver Epistar LED chip (or equivalent) CLIP IN FRAME & LED TECHNICAL INFORMATION Operating temperature Storage temperature Emergency output Initial flux -20 C to +50 C -30 C to +50 C 3 hours (3W) 300lm Neutral White > 3600lm IP rating 40 Warranty 5 years Emergency and dimmable light options are available upon request. 170 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

171 Suspension Systems Index page Crosslock Island ceilings System EX System ECR System EX System EL System EF System GX System GX

172 172 Crosslock

173 Crosslock The Crosslock system offers many advantages. It is unique that it accommodates the same M6 threaded groove along both sides of the aluminium body to facilitate mechanical fixing of trimming items such as plasterboard support or demountable partitions. Available in a variety of standard module sizes with two grid options. The system can also be adjusted to suit special tile sizes to conform with window mullion spacing or specific project needs. EDGE DETAILS Edge Detail Module Tile Face Tile Grid Size Size (nom) Depth Width C 600 x x x x x x mm deep Tegular tiles available in plain or perforated patterns GT114 hangers at 1200mm to 1500mm maximum centres depending on tile module Crosslock 15/16 grid GRID OPTIONS Plain XP Grid Threaded Crosslock Grid 173 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

174 174 Island Ceilings

175 100 Island Ceilings The SCAE range of Upstands are ideal for creating island ceilings where the upstand channel forms a frame around a ceiling area and is suspended either directly from the soffit or below an existing ceiling. In addition, the suspension can be set back from the profile edge to enhance the floating island effect. SCAE A Section shown above is SCAE Ideal for creating single module Islands and floating ceilings. STRAIGHT SPLICE TEE GRID CONNECTOR CLIP Tee Grids can be secured to the Upstand trims by using the SCAE-0002-A T-Grid Connector Clip. 19 Section CAE A SCAE-0007-A Straight Splice Connector to be slid into position at straight junctions. 2 No. splices are needed. 1. Rotate Tee Grid Connector Clip SCAE-0002-A clockwise into retaining grooves CORNER SPLICE 2. Clip will lock into position 3. Snip Tee Grid to correct length and secure to Connector Clip with 2 No. Tek screws so that the end of the Tee Bar butts up to the edge of the Upstand Trim. SCAE-0008-IA Internal Corner Spice to be slid into position at mitre junctions. 2 No. splices are needed. 175 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

176 176 System EX-24

177 System EX-24 System EX-24 is a popular and trusted suspension system, designed specifically for the majority of ceiling tiles. Its unique patented hooking system allows for a fast, easy and secure installation; with simple de-mounting. 2 MAX The 24mm wide t-grid system has flexible profiles and due to the thickness and strength, it can support heavy tiles. System EX-24 is compatible with both square and standard tegular edged tiles across all materials. ~ ~300 1 Standard modules that can be formed with System EX-24 are 600x600 and 1200x600 but a variety of others can be accommodated CAPPING COLOUR Grid Key: 1. Perimeter Trim 2. Suspension Hanger 3. Main Runner mm Cross Tee mm Cross Tee 6. Ceiling tile COMPONENTS Main runner 3700mm SECTIONS Standard module - Butt end Standard module - Joggled 100 mm 3700 mm 3700 mm mm mm 600 mm Cross tee 1200mm 38 mm 32 mm 38 mm 32 mm 600 mm 1200 mm 24 mm 24 mm 24 mm 24 mm Cross tee 600mm 300 mm 600 mm LOAD CAPACITY Main Runner Centres (mm) Suspension Hanger Centres 1200mm Load data is based on the layouts shown above and were conducted in accordance with the standards / test methods specified in BS EN kg/m kg/m The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

178 178 System ECR24

179 System ECR24 A fantastic suspension system which has been specifically designed to handle the most demanding of atmospheres. 2 System ECR24 has all the same great strengths of System EX-24 but with added ECR, which stands for Enhanced Corrosion Resistance. Each profile has been specifically painted with a finish which increases its resistance to corrosion making it suitable for high humidity areas and locations where additional hygiene performance is required. Just like system EX-24, it uses the same patented connection clip to ensure secure fastenings and easy demounting. ~ MAX ~300 1 CAPPING COLOUR Grid Key: 1. Perimeter Trim 2. Suspension Hanger 3. Main Runner mm Cross Tee mm Cross Tee 6. Ceiling tile COMPONENTS Main runner 3700mm SECTIONS Standard module - Butt end Standard module - Joggled 100 mm 3700 mm 3700 mm mm mm 600 mm Cross tee 1200mm 38 mm 32 mm 38 mm 32 mm 600 mm 1200 mm 24 mm 24 mm 24 mm 24 mm Cross tee 600mm 300 mm 600 mm LOAD CAPACITY Main Runner Suspension Hanger Centres Centres (mm) 1200mm kg/m 2 Load data is based on the layouts shown above and were conducted in accordance with the standards / test methods specified in BS EN kg/m The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

180 180 System EX-15

181 System EX-15 System EX-15 utilises the same unique patented clip as the EX-24 exposed grid, ensuring a secure click connection which provides easy installation and demountability. 2 System EX-15 has a narrower 15mm wide visible T section which offers a different aesthetic option. EX-15 has a white capping as standard though, as with EX-24, other colours can be provided as specials orders. EX-15 is compatible with some grid panel edge details and all fine tegular edged ceiling tiles within the range. EX-15 cross tees have a joggled overlap edge as standard, square butt end profiles can be made to order if required. MAX ~ ~300 1 CAPPING COLOUR Grid Key: 1. Perimeter Trim 2. Suspension Hanger 3. Main Runner mm Cross Tee mm Cross Tee 6. Ceiling tile COMPONENTS Main runner 3700mm SECTIONS Available modules - Overlap 100 mm 3700 mm 3700 mm mm Cross tee 1200mm 38 mm 34 mm 600 mm 1200 mm 15 mm 15 mm Cross tee 600mm 300 mm 600 mm LOAD CAPACITY Main Runner Suspension Hanger Centres Centres (mm) 1200mm kg/m 2 Load data is based on the layouts shown above and were conducted in accordance with the standards / test methods specified in BS EN kg/m The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

182 182 System EL

183 System EL System EL offers a different aesthetic compared to conventional exposed grids. Based around the same patented clip connection utilised in the EX range of exposed grids, System EL has a 15mm wide box section instead of the usual flat T. This enables feature Tegular tiles to sit flush with the face of the grid creating a monolithic ceiling. 2 MAX The colour of System EL can be varied to alter the aesthetics, with all white being the standard. This system also features a decorative line which runs along the system, creating a unique finish. ~ ~ COLOUR Grid Key: 1. Perimeter Trim 2. Suspension Hanger 3. Main Runner mm Cross Tee mm Cross Tee 6. Ceiling tile White Silver White / Black Silver / Black COMPONENTS Main runner 3700mm SECTIONS Standard module - Butt end mm 1200 mm 600 mm 41,5 mm Cross tee 1200mm Profile without punches and bevels for 1200x600 mm module ,5 mm 1200 Cross tee 600mm 600 LOAD CAPACITY Main Runner Suspension Hanger Centres Centres (mm) 1200mm kg/m 2 Load data is based on the layouts shown above and were conducted in accordance with the standards / test methods specified in BS EN kg/m The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

184 184 System EF

185 System EF System EF is a competitively priced system which matches the quality of System EX-24 but with less load capability. It uses the same unique patented hooking system which allows for a fast, easy and secure installation with simple de-mounting. 2 The 24mm wide t-grid system has flexible profiles and is compatible with both square and standard Tegular edged tiles across all materials Standard modules that can be formed with System EF are 600x600 and 1200x600 but a variety of others can be accommodated. MAX ~ ~ CAPPING COLOUR Grid Key: 1. Perimeter Trim 2. Suspension Hanger 3. Main Runner mm Cross Tee mm Cross Tee 6. Ceiling tile COMPONENTS Main runner 3700mm SECTIONS Standard module - Butt end 3700 mm mm 100 mm 3700 mm 38 mm 32 mm Cross tee 1200mm 24 mm 24 mm 600 mm 1200 mm Cross tee 600mm 300 mm 600 mm LOAD CAPACITY Main Runner Suspension Hanger Centres Centres (mm) 1200mm kg/m 2 Load data is based on the layouts shown above and were conducted in accordance with the standards / test methods specified in BS EN kg/m The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

186 186 System GX-24

187 System GX-24 System GX-24 is a popular and trusted suspension system, designed specifically for the majority of ceiling tiles. Its unique patented hooking system allows for a fast, easy and secure installation with simple de-mounting. 2 MAX The 24mm wide t-grid system has flexible profiles and due to the thickness and strength, it can support heavy tiles. System GX-24 is compatible with both square and standard Tegular edged tiles across all materials. ~ ~300 1 Standard modules that can be formed with System GX-24 are 600x600 and 1200x600 but a variety of others can be accommodated CAPPING COLOUR White RAL9010 Grid Key: 1. Perimeter Trim 2. Suspension Hanger 3. Main Runner mm Cross Tee mm Cross Tee 6. Ceiling tile COMPONENTS Main runner 3700mm SECTIONS Standard module 3700 mm 1200 mm 600 mm 100 mm 3700 mm 38 mm 33 mm 25 mm Cross tee 1200mm 24 mm 24 mm 24 mm 600 mm 1200 mm Cross tee 600mm 300 mm 600 mm LOAD CAPACITY Main Runner Centres (mm) Suspension Hanger Centres 1200mm Load data is based on the layouts shown above and were conducted in accordance with the standards / test methods specified in BS EN kg/m kg/m The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

188 188 System GX-15

189 System GX-15 System GX-15 utilises the same unique patented clip as the GX-24 exposed grid, ensuring a secure click connection which provides easy installation and demountability. 2 MAX System GX-15 has a narrower 15mm wide visible T section which offers a different aesthetic option. GX-15 has a white capping as standard though, as with GX-24, other colours can be provided as specials. ~ ~300 1 GX-15 is compatible with some grid panel edge details and all fine tegular edged ceiling tiles within the range. GX-15 cross tees have a joggled overlap edge as standard, square butt end profiles can be made to order if required. CAPPING COLOUR Grid Key: 1. Perimeter Trim 2. Suspension Hanger 3. Main Runner mm Cross Tee mm Cross Tee 6. Ceiling tile 600 White RAL9010 COMPONENTS Main runner 3700mm SECTIONS Standard module 3700 mm 1200 mm 600 mm 100 mm 3700 mm 38 mm 38 mm 38 mm Cross tee 1200mm 15 mm 15 mm 15 mm 600 mm 1200 mm Cross tee 600mm 300 mm 600 mm LOAD CAPACITY Main Runner Centres (mm) Suspension Hanger Centres 1200mm kg/m kg/m 2 Load data is based on laboratory tests in accordance with EN 13964, using the layout shown above and appropriate hangers. Top fixings used must be appropriate for the soffit construction and loading. 189 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

190 190 Trims

191 Part Code Description Mineral Fibre Soft Fibre Sequence Plasterboard Cleancare Metal Clip-In Metal Tegular Metal Linear Beam ET X20MM EXTRUDED SHADOWLINE ANGLE TRIM RAL9010 ET X8 STEPPED PLASTERBOARD ANGLE TRIM RAL9010 ET180 20X38 EXTRUDED ANGLE RAL9010 ET181 20X38 EXTRUDED CHANNEL RAL9010 ET182 15X15 EXTRUDED SHADOWLINE CHANNEL RAL9010 ET183 20X20 EXTRUDED SHADOWLINE CHANNEL RAL MM LONG ET184 15X15 EXTRUDED SHADOWLINE PLASTERBOARD CHANNEL RAL9010 ET185 15X15 EXTRUDED SHADOWLINE PLASTERBOARD WALL TRIM RAL9010 ET186 EXTRUDED I SECTION 37X38MM RAL9010 ET196 15X15 SPRING TEE TO PLASTERBOARD SHADOWLINE TRIM RAL9010 ET199 34X38 EXTRUDED UPSTAND CHANNEL RAL9010 ET X 42.3 BEVELLED TILE TO PLASTERBOARD TRIM RAL9010 ET209 15X15 SHADOWGAP PLASTERBOARD 30MM DEEP RAL9010 ET259 15X15 PLASTERBOARD/ANGLE TRIM RAL9010 ET273 15X16 STEPPED PLASTERBOARD ANGLE TRIM RAL9010 ET282 10X10 SHADOWGAP PLASTERBOARD 30MM DEEP RAL9010 ET330 60X20 F TRIM EXTRUDED CHANNEL RAL9010 ET400 ANGLE / PLASTER TRIM RAL9010 ET401 CHANNEL / PLASTER TRIM RAL9010 ET402 15X15MM EXTRUDED SHADOWLINE ANGLE TRIM RAL9010 ET407 25X21.2 ANGLE TRIM PLASTERBOARD EDGE BEAD RAL9010 GTP MM EXTRUDED ALUM CORNER SECTION RAL The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

192 Part Code Description Drawing Number ET X20MM EXTRUDED SHADOWLINE ANGLE TRIM RAL9010 SCG Part Code Description Drawing Number ET X8 STEPPED PLASTERBOARDANGLE TRIM RAL9010 SCG Part Code Description Drawing Number ET180 20X38 EXTRUDED ANGLE RAL9010 SCG Part Code Description Drawing Number ET181 20X38 EXTRUDED CHANNEL RAL9010 SCG

193 Part Code Description Drawing Number ET182 15X15 EXTRUDED SHADOWLINE CHANNEL RAL9010 SCG Part Code Description Drawing Number ET183 20X20 EXTRUDED SHADOWLINE CHANNEL RAL MM LONG SCG Part Code Description Drawing Number ET184 15X15 EXTRUDED SHADOWLINE PLASTERBOARD CHANNEL RAL9010 SCG Part Code Description Drawing Number ET185 15X15 EXTRUDED SHADOWLINE PLASTERBOARD WALL TRIM RAL9010 SCG The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

194 Part Code Description Drawing Number ET186 EXTRUDED I SECTION 37X38MM RAL9010 SCG Part Code Description Drawing Number ET196 15X15 SPRING TEE TO PLASTERBOARD SHADOWLINE TRIM RAL9010 SCG Part Code Description Drawing Number ET199 34X38 EXTRUDED UPSTAND CHANNEL RAL9010 SCG Part Code Description Drawing Number ET X 42.3 BEVELLED TILE TO PLASTERBOARD TRIM RAL9010 SCG

195 6 Part Code Description Drawing Number ET209 15X15 SHADOWGAP PLASTERBOARD 30MM DEEP RAL9010 SCG Part Code Description Drawing Number ET259 15X15 PLASTERBOARD/ ANGLE TRIM RAL9010 SCG Part Code Description Drawing Number ET273 15X16 STEPPED PLASTERBOARD ANGLE TRIM RAL9010 SCG Part Code Description Drawing Number ET282 10X10 SHADOWGAP PLASTERBOARD 30MM DEEP RAL9010 SCG The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

196 Part Code Description Drawing Number ET330 60X20 F TRIM EXTRUDED CHANNEL RAL9010 SCG Part Code Description Drawing Number ET400 ANGLE / PLASTER TRIM RAL9010 SCG Part Code Description Drawing Number ET401 CHANNEL / PLASTER TRIM RAL9010 SCG Part Code Description Drawing Number ET402 15X15MM EXTRUDED SHADOWLINE ANGLE TRIM RAL9010 SCG

197 Part Code Description Drawing Number ET407 25X21.2 ANGLE TRIM PLASTERBOARD EDGE BEAD RAL Part Code Description Drawing Number GTP MM EXTRUDED ALUM CORNER SECTION RAL9010 SCG The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

198 Sector Solutions index page Sector Specification

199 education Secondary school 199 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

200 healthcare environments Clinical Dry Clinical Wet Clinical Specialist Non-clinical Wet Non-clinical Dry Heavy Traffic Special Patient Areas 200

201 Technical Guidance & Performance Data page Technical Overview 202 Acoustics Environment Fire Hygiene 209 Light Reflectance 210 Healthcare 211 Handling & Storage Cleaning 214 Removal of Concealed Metal Clip-In Tiles 215 Installation Guide

202 technical overview In most cases suspended ceilings provide the designer with an opportunity to create an aesthetic solution as well as incorporate key performance characteristics in the design of the room. This can ensure the space not only looks good but also provides a safe and suitable environment for applications ranging from schools and colleges to hospitals, clinics, clean rooms and laboratories through to offices and retail outlets. LIGHT REFLECTANCE The level of reflectance from surfaces in a room is strongly influenced by their colour and sheen. Bright white surfaces with high levels of light reflectance can reduce the amount of artificial light required in a room as well as the energy bill. ACOUSTICS Depending on the surface design and their construction (metal, mineral or soft fibre) suspended ceiling can provide very low or very high levels of sound absorption and as room to room airborne sound reduction. ENVIRONMENT Some of the important qualities required by environmental accreditation schemes such as BREEAM and LEED are the low emission of Volatile Organic Compounds (VOC s) such as formaldehyde and the recyclability of products. HYGIENE Important in clinical and food production hygiene a products ability to resist fungal and bacterial growth can be a critical factor in the specification process. Burgess By System have products that are designed for such applications. FIRE Fire performance is broken down into Reaction to Fire which tests the materials fire qualities by assessing its contribution to the propagation and spread of a fire as well as the production of smoke and flaming droplet. The second is the level of Structural Fire Resistance that can be achieved when a ceiling is installed under a specific type of floor construction. HUMIDITY RESISTANCE The level of relative humidity (RH %) that a ceiling tile can endure before deflection occurs. QUALITY MANAGEMENT IS Quality Management Systems and ISO Environmental Management systems STANDARDS Products are manufactured in accordance with the European Standard for Suspended Ceilings BS EN13964: 2014 Suspended Ceilings Requirements and test methods and the recommendations of TAIM, The Association of Industrial Metal CEILING Manufacturers. MAINTENANCE, REDECORATION AND CLEANING. Our suspended ceiling systems can be cleaned and redecorated but care must be taken to prevent any of the key characteristics being compromised. 202 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

203 acoustics The primary purpose of analysing the construction of a room or space is to ensure that it is acoustically suitable for its primary use. ROOM ACOUSTICS This is normally achieved by ensuring the reverberation time and/or speech intelligibility meets the criteria needed for the intended room use. Sound Absorption Coefficient To achieve this, the sound absorption values of the proposed room surfaces can be used by the acoustician to calculate the existing reverberation time of that space. If the result does not meet the required performance alternative surfaces can be introduced into the design before construction begins. It is important to remember that areas can have too much as well as too little absorption. If the balance is not correct, both extremes can make the area uncomfortable and difficult for people to work in. Depending on the material and surface design a suspended ceiling can provide a high level of sound absorption and is generally the most effective surface in a room as it is never obstructed by objects such as desks and chairs. Although we are looking for the correct reverberation time in a room or space the performance of the products are normally expressed as sound absorption coefficients. These show the amount of sound absorbed across a range of specific frequencies and will range from 0.00 to 1 with 0.00 representing total reflection and 1 total absorption. The sound absorption coefficients of all the surfaces in a room are then used to calculate the anticipated reverberation time. Absorption Coefficient Frequency, Hz For ease of product comparison a single figure can be calculated from the product test data (see typical graph above). This is called the Noise Reduction Coeffficient (NRC) if using American ASTM standards or α w if using European standards. The European standards further classifies products into one of following Sound Absorption Classes depending on their α w performance. EUROPEAN SOUND ABSORPTION CLASSES Class A 0.90, 0.95, 1.00, Class B 0.80, 0.85 Class C 0.60, 0.65, 0.75, Class D 0.30, 0.35, 0.40, 0.45, 0.50, 0.55, Class E 0.15, 0.20, 0.25, Non Classified 0.00, 0.05, 0.10, 203

204 RAFTS ISLANDS AND WALL PANELS With the increased use of thermal mass in buildings the use of a propriety suspended ceiling in a space is no longer a practical solution. The creation of individual, high performance ceiling rafts, islands and wall panels allows the introduction of sound absorption in the ceiling plane and vertical surfaces while still providing airflow through the space to make use of the passive cooling and heating design. The added advantage is the ability to combine and strategically place the ceiling rafts, Islands and wall panels to achieve the most effective acoustic design while having the choice in some formats of colour, sizes and shapes. BUILDING ACOUSTICS The construction of the building, the quality of internal partitions and floors along with the placing of noise sources inside and out can have a significant effect on the sound quality of an internal environment. If constructed correctly the inclusion of a suspended ceilings can make a considerable improvement to the quality of most interior environments. Lateral room to room airborne sound reduction can be critical between offices, consulting rooms and any space that needs to be separated acoustically from the adjacent room. The result is measured across a range of frequencies and normally expressed as a single Dnfw figure. It is effectively the reduction created by the sound passing through the ceiling twice, once in each workspace or room. The performance of a partition is tested by generating sound on one side of a chamber divided by the partition under test. The measuring the amount of airborne sound it prevents from passing through it. The resulting reduction is measured over a range of frequencies and normally expressed in db s as single Rw figure. Where transfer of noise or speech between adjacent rooms is critical it is important to match the performance of the ceiling with that of the partition. So if for example there is a requirement for an airborne sound reduction of 35dB between adjacent rooms with a common void the partition should have an Rw rating of 35dB and the ceilings a Dnfw of at least 35dB. It is important to compare like for like when looking at the airborne sound reduction of ceilings and partitions. The Rw performance of a ceiling can be significantly lower than its Dnfw value. Where noise and vibrations are being transmitted through the structure of a building the suspended ceiling can do little to provide any acoustic solution 204 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

205 the environment The environment now forms an integral part of most construction projects and accreditation schemes have grown up around the need to be able to quantify and provide a measurement of the buildings environmental impact. There are a number of well-known accreditation schemes around the world with the UK s BREEAM, USA s LEED and Australia s Greens Star being some of the better known internationally. Most have now expanded their schemes to include refurbishment as well as new build projects in an attempt to promote good practice throughout the industry. In the UK independent refurbishment assessment schemes such as the RICS SKArating have been running for several years. All new build schemes promote key areas such as the efficient use of energy and water and all support the use of products in the construction process that have been manufactured by responsible companies who use sustainable raw materials wherever possible, and provide low emission products that are not injurious to the health and wellbeing of its employees or those people working in the environment where the products have been installed. Some schemes also use criteria such as recycled content, reuse of product or the ability to recycle the product at the end of its life. The European Construction Products Regulation now requires products to be accompanied by a Declaration of Performance which for the ceilings industry means declaring things such as formaldehyde and asbestos content. It has therefore become easier to see if the product selected poses a serious health risk to the working environment. Low level emission of formaldehyde can also help attain credits in most environmental accreditation schemes. We can confirm that none of the range of Burgess By System Ceiling tiles involve the use or addition of formaldehydes in their production process. This enables the products to be classified E1 in accordnace with the EN 13964:2004 standard, as denoted by the CE markings. The investment in international environmental management systems such as ISO and quality management system ISO 9001 also provide good indicators of a company s commitment to such responsibilities. 205

206 our commitment As a company Burgess By System have been manufacturing suspended ceilings for decades and have been able to see the advantages of developing an environmental strategy. PRACTICAL ENVIRONMENTAL CONSIDERATIONS Recycling and reduction of production waste and the efficient use of energy and other resources reduces consumption of raw materials as well as waste to landfill. As well as a social consideration it also provides economic benefits by instilling a healthy discipline within the company which in turn helps keep costs down. The quality of packaging, storage and handling all help to deliver a sound product to site and of course the quality of the product helps to achieve an installation with the minimum of waste. The flexibility and quality of our ceiling systems allows many to be produced in special project sizes that can reduce waste on site as well as installation time. From a sustainability point of view our metal ceiling products probably have one of the highest recycling rates of any construction product. 206 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

207 fire One of the most common requirements is that the material used complies with Class O. This is a requirement of Building Regulations Approved document B and can be complied with by using materials that are either:- Classified as Non-Combustible when tested in accordance with BS476: Part 4 Deemed to be of Limited Combustibility when tested to BS476: Part 11 Achieved a Class 1 Surface Spread of Flame when tested to BS476: Part 7 and achieved a fire propagation index (1) of not more than 12 and a sub-index (i1) of not more than 6 when tested to BS476: Part 6 Reaction to Fire is the term for product classified in accordance with the Harmonised European Norm (hen) EN If tested by an Notified Body the results are valid throughout the European Union and accepted by all member countries. REACTION TO FIRE CLASSIFICATIONS A1 A2 B Non - combustible Limited combustibility No flashover Euroclass performance classifications also include the additional criteria of Smoke and Flaming droplets on most classification below A1 Smoke has three classification S1, S2 and S3 with S1 being the lowest and similarly flaming droplets are classified as d0, d1 and d2. STRUCTURAL PERFORMANCE When a suspended ceiling is installed under a structural floor to form a construction it can then be tested to see what degree of fire resistance it is capable of providing. Typically the of insulation. In practice it is important to install the ceiling in accordance with the test report and ensure that any intrusions in to the ceiling plane have a similar level of fire resistance to that of the ceiling. C Flashover occurs after 10 minutes D Flashover occurs between 2 and 10 minutes E F Flashover occurs before 2 minutes No performance determined Products classified in accordance with harmonised European standards of BS EN can be deemed to be Class 0 if they achieve a Reaction to Fire classification of A1, A2 or B. 207

208 MARINE & OFFSHORE METAL CEILINGS Burgess By System offer Clip-in Tile systems for use in both Marine and Offshore installations. Clip-in 600 x 600mm Stainless Steel tiles are available for use in aggressive/high humidity areas such as galleys, together with painted tiles for other areas. FIRE RESISTANCE TESTS - Marine Fire resistance tests for the latest International marine applications have also been completed to IMO A.754(18)/A-30/B15 ceiling standard. This is a very stringent test to ensure the metal Category A certification requires that the suspended ceiling remains integral and that decking temperature above the suspended ceiling does not exceed 180 C. Category B certification requires that the suspended ceiling remains integral and that the temperature of the decking above does not exceed 225 C. These tests are more demanding than their equivalent BS476 requirements, which reflects the importance of the ceiling membrane in the protection of metal decking above the ceiling in marine applications. Burgess By System Clip-in ceilings have achieved A-30, B-15 ratings in accordance with the requirements of this standard. 208 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

209 hygiene The resistance that comes with Burgess By System Hygiene mineral tiles and the Biocote range of metal tiles does not fade, it continues to fight bacteria for the life of the ceiling. An important subject when ceilings are used in areas where resistance to bacterial growth is critical such as laboratories, clean rooms and key areas of clinical buildings where serious infections like MRSA can occur. Burgess By System offer a Hygiene range of mineral tiles that are resistant to fungal and bacterial growth and a healthcare option on our metal range of ceilings. 209

210 light reflectance Mineral Soft Fibre Acoustique 85 Sequence 80 Acoustique db 85 Sequence db 80 Classcare 82 Sequence Hygiene 80 Classcare Plain 83 Sequel 80 Classcare Sequence rafts 80 Classcare db 82 Classcare Plus 85 Classcare Plus db 85 Gypsum Healthcare Perforated 82 Cleancare 84 Healthcare Plain 82 Cleancare Hygiene 84 Healthcare Perforated db 82 Plain Wipedown 82 Healthcare Plain db 82 Healthcare Plus 85 Healthcare Plus db 85 Metal Solitex Perforated 82 Plain 86 Solitex Plain 82 Solitex Perforated db 82 D278 Perf with Black Fleece 71 D320 Perf with Black Fleece 71 Solitex Plain db 82 Plain PVDF finish 86 Needlepoint 82 Plain Plastisol finish 86 Random Fissured The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

211 healthcare Offering built-in continuous protection against a broad range of bacteria, this tile helps reduce the risk of cross contamination. Ideal for healthcare and catering sectors.»»»»»»» Built in continuous protection against a broad range of bacteria Reduces bacteria on the surface of the tile by up to 99.9% over a 24-hour period Reduces the risk of cross-contamination A cleaner and more hygienic environment Can be applied to the entire metals range A cost effective and proactive solution Ideal for healthcare and catering sectors The active agent is based on natural products that are proven to be safe. The healthcare metal ceiling tile range offers the opportunity to specify products for hygiene sensitive environments that can provide 24 hour resistance against the growth of a wide range of micro organisms throughout the lifetime of the product. TECHNOLOGY Healthcare inhibits the growth of a wide range of bacteria, including: E-coli» Salmonella» Listeria» Legionella» Pseudomonas» MRSA 211

212 handling and storage Burgess By System products have been manufactured to the highest standards for over 50 years. If installed correctly and handled carefully during their lifetime they will last for many years. MINERAL AND SOFT FIBRE TILES, PANELS AND PLANKS. Tile cartons should be treated with care and placed on a suitable flat surface, stored in a dry environment and shielded from adverse conditions. Do not drop or put cartons down on their corners or edges. If necessary to move manually, planks should be carried on their side and by two people to prevent product damage and personal injury. Do not stack more than 2 pallets high. METAL TILES PANELS AND PLANKS Tile cartons should be treated with care and be placed onto a suitable flat surface, stored in a dry environment and shielded from adverse conditions. METAL PROFILES Metal profile cartons should be treated with care and placed on a suitable flat surface, stored in a dry environment and shielded from adverse conditions. Do not drop or place cartons on their corners or edges and stack cartons carefully. If necessary to move manually, heavy and cartons longer than 1200mm should be carried by two people to prevent product damage and personal injury. When installing all types of Burgess By System ceiling tiles it is advisable to ensure hands are kept clean or to wear white cotton gloves to prevent the transfer of dirt onto the face of the tiles. Do not drop or place cartons on their corners or edges and stack cartons with the arrows on the cartons pointing up. If necessary to move manually, planks and heavy cartons should be carried with the arrows pointing up at all times and by two people to prevent product damage and personal injury. Do not stack pallets more than 4 cartons high and no more than 1 pallet high. 212 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

213 HANDLING Care should be taken when handling cut tiles and gridwork where sharp edges may be left - personal protection equipment should be used as appropriate at all times.» Applicable to all our metal products RE-DECORATING Where required, air-drying touch-up paint can be supplied to make good small areas of recommend over-painting of grid or trims.» Applicable to all our products VACUUM CLEANING Use a vacuum cleaner with low vacuum and soft brush attachment.» Applicable to all our products DRY CLEANING Remove surface dust from the ceiling using a soft brush or a vacuum cleaner with a brush mouthpiece.» Applicable to all our products METAL TILES AND PROFILES Where tiles must be cut on site, at perimeters for instance, then this can easily be achieved using suitable hand or power tools. Mineral craft knife. For long straight or curved cuts, we would recommend the use of electric metal shears. Circular or rectangular apertures can be formed with either tin snips or electric metal shears, with sheet metal punches being more appropriate for small diameter circular holes. Electric metal shears can be operated with one hand, giving distortion free cuts that applications must be treated. WET WIPING An alternative method of cleaning is with a moist cloth or sponge dampened in water containing mild soap or diluted detergent (ph value 8-11) 1:100 concentration, but abrasive sponges, clothes or cleaners must not be used. The sponge should contain as little water as» Applicable to all our products be wiped off with a cloth or sponge lightly dampened in clean water. Specialist contractors offer cleaning services using their own mix and choice of chemical solutions. Where these methods are employed, it is recommended that a trial operation is effect can be assessed. It is best in this case to conduct such a test in a non-critical area of the building.» Applicable to all our metal products 213

214 PRODUCT TITLE DRY CLEANING VACUUM CLEAN WET WIPING POWER WASH ANTI BACTERIAL SURFACE Acoustique/ Acoustique db Cinema Classcare/ Classcare Classcare Plus/ Classcare Plus Classcare19 Cleancare Cleancare Hygiene Healthcare Plain/ Healthcare Plain Healthcare Perf/ Healthcare Perf Healthcare 100 Healthcare Plus/ Healthcare Plus Metroboard Metroboard Line/ Circle/Square/ Edge Needlepoint Sequence/ Sequence Sequence Black Sequence Acoustic Sequence Wall Panels** Solitex Plain/ Solitex Plain Solitex Perf/ Solitex Perf 214 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

215 REMOVAL OF CONCEALED METAL CLIP-IN TILES The method of extracting Burgess By System Clip-In and Swingdown tiles using the blade extractor tool (product No. GT137) is as follows:- 1. Establish the direction of the spring tee bar. Where rectangular tiles are used, the tee bar normally runs along the short side of the tile. For square tiles, the spring tee bar generally runs lengthways down the room. 2. Insert the blade extractor at a slight angle between the tile joints, approximately 50mm from the tile corner, with the hook of the blade facing the tile to be removed. 3. Push in the blade until it touches the top of the spring tee section. Move the handle to the vertical position. You should hear the hook click over the 4. Pivot the blade against the top of the tee section by moving the handle to an angle and the tile should start to come out. Do not pull blade directly down. A 5 or 6mm movement will free the pip from the bulb of the tee. Repeat the process on the parallel corner of the tile. The tile can now be removed in a controlled manner. With longer planks, you may require the assistance of a second person. 5. To replace the tile, offer the edge of the pipped bar. Working at the corners, push the tile into the tee bar until the pip engages into the bulb of the tee. If necessary place a cloth-covered block on the corner and tap home the tile. To avoid cotton gloves be used for the above maintenance operations. A limpet vacuum lifter (GT 135) can be used to remove non-perforated tiles in a similar fashion.» Applicable to all our products 215

216 Installation guide Sequence Rafts, Baffles & Wall Absorbers Burgess By System direct fix plates offer an alternative to a framed wall panel installation. They are made from galvanised steel and enable Sequence Wall Panels or Acoustic Baffles to be mounted onto wall surfaces without any visible fixings. The fixing guidance notes are down the right hand side of the page with the amount of direct fix plates needed shown down the left. Panel Length (mm) Panel Width (mm) Direct Fix Brackets advised Wall Mounting Ensure the plates are securely fixing to the wall surface in the appropriate centres and number. Place the top edge of the panel on the required line and swing the bottom edge to meet the fixing plates. With the panel against the fixing plates, gently push the panel into the wall and ease down onto the fixing plate spikes. Direct fix plates should be at least 100mm in from the edge of the panels once located. Guidance Notes Direct fix panels can be removed by reversing the installation process. If the panels are to be non-removable the above process should be accompanied by a direct bond adhesive being applied to the back of the panels and to the front point of the fixing plate spikes. Please bear in mind that the enclosed guidance is based on panels being applied to smooth, flat surfaces. Any wall undulations will either require additional plates being used or an uneven panel face being seen. All the drawings on this guide are for guidance and illustration only and are not done to scale. Details and specifications are subject to change, please contact Burgess By System for any clarification. 216 The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations. +44 (0)

217 CAE 302 Vertical T-Cover 3600mm CAE 740 Wall Panel Odd Leg Frame 3000mm long CAE 007 Straight Splice CAE 008i Internal Corner Splice Fixing H dimension is outside vertical dimension of frame. W dimension is outside horizontal dimension of frame Mitre cut ends of trim CAE740. Top rail to have 25mm face to front, side and base rail to have 12.5mm face to front. At top corners mitre angles to be 27 for the side rails and 63 for the top rail. Bottom corners to be cut at 45. Fix perimeter rails to wall using appropriate wall fixings at max 450mm centres. At corners insert CAE 0081 corner splices to stabilise the corners. Cut acoustic wall panels to: height H-20mm Width of 2 No. end panels to be calculated to be same within frame. Central panels are 600mm wide with tees fixed at 610mm centres. Starting at right side of frame, install first acoustic panel by inserting top edge of panel into top rail sufficiently to clear front lip of base rail, then inserting panel inside front lip of the bottom rail. Slide panel down 8mm into bottom rail, then slide panel sideways into side rail, ensuring panel face engages inside the side rail by a minimum of 5mm. Square cut the aluminium Tee sections CAE302 to H-38. Smm. Fix noggin clips to both ends of the Tee section by placing the edge of the clip into the groove of the tee and securing with a self drilling screw through the hole in the clip into the tee stem. Where the tee meets the wide face at the top rail the bracket extends by 23mm and where it meets the narrow face at the bottom rail the bracket extends by 10mm beyond the end of the tee. Align the tee and noggin clips into the frame and rotate and engage into the nibs in the top and bottom rails simultaneously. Once rotated the tee can be slid along the top and bottom rails to the edge of the first acoustic wall panel. Insert the next acoustic wall panel as before, sliding it up to the tee section. Insert the next tee section as before, and slide it to the edge of the second wall panel. Tee centre to centre is 610mm. Ensure the tees are kept vertical. Continue to fix panels and tees until the ultimate tee. Leave this out and fix final acoustic wall panel, sliding it fully into side perimeter rail. The final tee should have only 1 noggin clip fixed to it at the top. At the bottom slide a CAE 007 straight noggin clip into the tee so that it projects by 2-3mm. Insert the tee at the top between the acoustic panels, twist and engage into the nibs of the top rail. Push the bottom of the tee be tween the acoustic panels so that the CAE 007 splice passes over the lip of the bottom rail and holds the te in position. If necessary move the end panel back toward the final tee to keep the assembly tight. 217