Description POLYMERS OF ETHYLENE, IN PRIMARY FORMS 3901 POLYMERS OF ETHYLENE, IN PRIMARY FORMS: Polyethylene having a specific gravity 5%

Transcription

1 3901 POLYMERS OF ETHYLENE, IN PRIMARY FORMS HS Code SS Units Rate # 3901 POLYMERS OF ETHYLENE, IN PRIMARY FORMS: Polyethylene having a specific gravity 5% of less than kg Linear low density polyethylene (LLDPE) 02 kg Low density polyethylene (LDPE) kg - Polyethylene having a specific gravity 5% of 0.94 or more Ethylene-vinyl acetate copolymers 5% 04 kg Liquid forms; adhesives 05 kg Other kg - Other 5% 3902 POLYMERS OF PROPYLENE OR OF OTHER OLEFINS, IN PRIMARY FORMS HS Code SS Units Rate # 3902 POLYMERS OF PROPYLENE OR OF OTHER OLEFINS, IN PRIMARY FORMS: kg - Polypropylene 5% kg - Polyisobutylene Free Propylene copolymers 5% 09 kg Compounds; adhesives 10 kg Other kg - Other 5% 3903 POLYMERS OF STYRENE, IN PRIMARY FORMS HS Code SS Units Rate # 3903 POLYMERS OF STYRENE, IN PRIMARY FORMS:

2 Polystyrene: kg -- Expansible 5% kg -- Other 5% kg - Styrene-acrylonitrile (SAN) copolymers 5% kg - Acrylonitrile-butadiene-styrene (ABS) 5% copolymers kg - Other 5%..ENDPAGE 3904 POLYMERS OF VINYL CHLORIDE OR OF OTHER HALOGENATED OLEFINS, IN PRIMARY FORMS HS Code SS Units Rate # 3904 POLYMERS OF VINYL CHLORIDE OR OF OTHER HALOGENATED OLEFINS, IN PRIMARY FORMS: Poly(vinyl chloride), not mixed with any 5% other substances 17 kg Paste making 18 kg Other Other poly(vinyl chloride): kg -- Non-plasticised 5% kg -- Plasticised 5% kg - Vinyl chloride-vinyl acetate copolymers 5% kg - Other vinyl chloride copolymers 5% kg - Vinylidene chloride polymers 5% Fluoro-polymers: kg -- Polytetrafluoroethylene 5% kg -- Other 5% kg - Other 5% 3905 POLYMERS OF VINYL ACETATE OR OF OTHER VINYL ESTERS, IN PRIMARY FORMS; OTHER VINYL POLYMERS IN PRIMARY FORMS HS Code SS Units Rate # 3905 POLYMERS OF VINYL ACETATE OR OF OTHER VINYL ESTERS, IN PRIMARY FORMS; OTHER VINYL POLYMERS IN PRIMARY FORMS: Poly(vinyl acetate):

3 kg -- In aqueous dispersion 5% kg -- Other 5% Vinyl acetate copolymers: kg -- In aqueous dispersion 5% kg -- Other 5% kg - Poly(vinyl alcohol), whether or not 5% containing unhydrolysed acetate groups Other: kg -- Copolymers 5% kg -- Other 5% 3906 ACRYLIC POLYMERS IN PRIMARY FORMS HS Code SS Units Rate # 3906 ACRYLIC POLYMERS IN PRIMARY FORMS: Poly(methyl methacrylate) 5% 04 kg Powders; granules; flakes 38 kg Other Other 5% 06 kg Emulsions 07 kg Flocculating agents 08 kg Powders; granules; flakes 09 kg Other 3907 POLYACETALS, OTHER POLYETHERS AND EPOXIDE RESINS, IN PRIMARY FORMS; POLYCARBONATES, ALKYD RESINS, POLYALLYL ESTERS AND OTHER POLYESTERS, IN PRIMARY FORMS HS Code SS Units Rate # 3907 POLYACETALS, OTHER POLYETHERS AND EPOXIDE RESINS, IN PRIMARY FORMS; POLYCARBONATES, ALKYD RESINS, POLYALLYL ESTERS AND OTHER POLYESTERS, IN PRIMARY FORMS: kg - Polyacetals 5% Other polyethers 5% 35 kg Polyethylene oxide (including polyethylene

4 glycols) 36 kg Propylene oxide based polyols 37 kg Other Epoxide resins 5% 14 kg Liquid 15 kg Solid Polycarbonates 5% 16 kg Uncompounded 17 kg Other kg - Alkyd resins 5% kg - Poly(ethylene terephthalate) 5% Other polyesters: Unsaturated 5% 32 kg Vinyl ester resin 33 kg Other Other: kg --- Polybutylene terephthalate 5% Other 5% 23 kg Polyester polyols 39 kg Other 3908 POLYAMIDES IN PRIMARY FORMS HS Code SS Units Rate # 3908 POLYAMIDES IN PRIMARY FORMS: kg - Polyamide-6, -11, -12, -6,6, -6,9, -6,10 5% or -6, kg - Other 5% 3909 AMINO-RESINS, PHENOLIC RESINS AND POLYURETHANES, IN PRIMARY FORMS

5 HS Code SS Units Rate # 3909 AMINO-RESINS, PHENOLIC RESINS AND POLYURETHANES, IN PRIMARY FORMS: kg - Urea resins; thiourea resins 5% kg - Melamine resins 5% kg - Other amino-resins 5% Phenolic resins 5% 33 kg Phenol-formaldehyde moulding compound 34 kg Other Polyurethanes: Goods, as follows: 5% (a) addition products of polyols, being: (i) polyester polyols; or (ii) polyether polyols, being, or having the essential character of, ethylene oxide or propylene oxide derivatives, reacted with isocyanates, containing unreacted hydroxyl or isocyanate groups and, normally, further reacted through these hydroxyl or isocyanate groups; (b) goods, put up in sets consisting of two or more separate constituents which, when mixed together, form a polyurethane 02 kg Addition products of polyester polyols 03 kg Addition products of propylene oxide based polyether polyols 04 kg Other kg --- Other 5% 3910 SILICONES IN PRIMARY FORMS HS Code SS Units Rate # SILICONES IN PRIMARY FORMS 5% 06 kg Silicone fluids; silicone rubber 07 kg Other 3911 PETROLEUM RESINS, COUMARONE-INDENE RESINS, POLYTERPENES, POLYSULPHIDES, POLYSULPHONES AND OTHER PRODUCTS SPECIFIED IN NOTE 3 TO THIS CHAPTER, NOT ELSEWHERE SPECIFIED OR INCLUDED, IN PRIMARY FORMS

6 HS Code SS Units Rate # 3911 PETROLEUM RESINS, COUMARONE-INDENE RESINS, POLYTERPENES, POLYSULPHIDES, POLYSULPHONES AND OTHER PRODUCTS SPECIFIED IN NOTE 3 TO THIS CHAPTER, NOT ELSEWHERE SPECIFIED OR INCLUDED, IN PRIMARY FORMS: kg - Petroleum resins, coumarone, indene or 5% coumarone-indene resins and polyterpenes kg - Other 5% 3912 CELLULOSE AND ITS CHEMICAL DERIVATIVES, NOT ELSEWHERE SPECIFIED OR INCLUDED, IN PRIMARY FORMS HS Code SS Units Rate # 3912 CELLULOSE AND ITS CHEMICAL DERIVATIVES, NOT ELSEWHERE SPECIFIED OR INCLUDED, IN PRIMARY FORMS: Cellulose acetates: kg -- Non-plasticised Free kg -- Plasticised Free kg - Cellulose nitrates (including 5% collodions) Cellulose ethers: kg -- Carboxymethylcellulose and its salts 5% Other 5% 15 kg Hydroxyethylcellulose 16 kg Hydroxypropylmethylcellulose 17 kg Methylcellulose 18 kg Other kg - Other 5% 3913 NATURAL POLYMERS (FOR EXAMPLE, ALGINIC ACID) AND MODIFIED NATURAL POLYMERS (FOR EXAMPLE, HARDENED PROTEINS, CHEMICAL DERIVATIVES OF NATURAL RUBBER), NOT ELSEWHERE SPECIFIED OR INCLUDED, IN PRIMARY FORMS HS Code SS Units Rate # 3913 NATURAL POLYMERS (FOR EXAMPLE, ALGINIC ACID) AND MODIFIED NATURAL POLYMERS (FOR EXAMPLE, HARDENED PROTEINS, CHEMICAL DERIVATIVES OF NATURAL RUBBER), NOT ELSEWHERE SPECIFIED OR INCLUDED, IN

7 PRIMARY FORMS: kg - Alginic acid, its salts and esters 5% kg - Other 5% 3914 ION-EXCHANGERS BASED ON POLYMERS OF 3901 TO 3913, IN PRIMARY FORMS HS Code SS Units Rate # 3915 WASTE, PARINGS AND SCRAP, OF PLASTICS HS Code SS Units Rate # 3915 WASTE, PARINGS AND SCRAP, OF PLASTICS: kg - Of polymers of ethylene 5% kg - Of polymers of styrene 5% kg - Of polymers of vinyl chloride 5% Of other plastics: kg --- Of plastics, as follows: 5% (a) of polymers of propylene; (b) of polymers of vinyl; (c) of polymers of vinylidene kg --- Of other plastics 5% 3916 MONOFILAMENT OF WHICH ANY CROSS-SECTIONAL DIMENSION EXCEEDS 1 mm, RODS, STICKS AND PROFILE SHAPES, WHETHER OR NOT SURFACE-WORKED BUT NOT OTHERWISE WORKED, OF PLASTICS HS Code SS Units Rate # 3916 MONOFILAMENT OF WHICH ANY CROSS-SECTIONAL DIMENSION EXCEEDS 1 mm, RODS, STICKS AND PROFILE SHAPES, WHETHER OR NOT SURFACE-WORKED BUT NOT OTHERWISE WORKED, OF PLASTICS: m - Of polymers of ethylene 5% m - Of polymers of vinyl chloride 5% m - Of other plastics 5%

8 3917 TUBES, PIPES AND HOSES, AND FITTINGS THEREFOR (FOR EXAMPLE, JOINTS, ELBOWS, FLANGES), OF PLASTICS HS Code SS Units Rate # 3917 TUBES, PIPES AND HOSES, AND FITTINGS THEREFOR (FOR EXAMPLE, JOINTS, ELBOWS, FLANGES), OF PLASTICS: Artificial guts (sausage casings) of Free hardened protein or of cellulosic materials 86 m Of hardened protein 87 m Other Tubes, pipes and hoses, rigid: Of polymers of ethylene: m --- Of a kind used as components in 15% passenger motor vehicles DC:10% DCS:10% CAN:10% From 1 January % DC:5% CAN:5% From 1 January % m --- Other 5% m -- Of polymers of propylene 15% DC:10% DCS:10% From 1 January % DC:5% From 1 January % m -- Of polymers of vinyl chloride 15% DC:10% DCS:10% From 1 January % DC:5% From 1 January % m -- Of other plastics 15% DC:10% DCS:10% From 1 January % DC:5% From 1 January %

9 Other tubes, pipes and hoses: Flexible tubes, pipes and hoses, having a minimum burst pressure of 27.6 MPa: m --- Of a kind used as components in 15% passenger motor vehicles DC:10% DCS:10% CAN:10% From 1 January % DC:5% CAN:5% From 1 January % m --- Other 5% Other, not reinforced or otherwise combined with other materials, without fittings: m --- Of a kind used as components in 15% passenger motor vehicles DC:10% DCS:10% CAN:10% From 1 January % DC:5% CAN:5% From 1 January % Other 5% 53 m Of polymers of vinyl chloride 34 m Of polymers of ethylene or of propylene 35 m Of other plastics Other, not reinforced or otherwise combined with other materials, with fittings: m --- Of a kind used as components in 15% passenger motor vehicles DC:10% DCS:10% CAN:10% From 1 January % DC:5% CAN:5% From 1 January % m --- Other 5% Other: m --- Of a kind used as components in 15% passenger motor vehicles DC:10%

10 DCS:10% CAN:10% From 1 January % DC:5% CAN:5% From 1 January % Other 5% 48 m Of polymers of vinyl chloride 58 m Of other plastics Fittings 5% 53 kg Of polymers of ethylene or of propylene 59 kg Of other plastics 3918 FLOOR COVERINGS OF PLASTICS, WHETHER OR NOT SELF-ADHESIVE, IN ROLLS OR IN THE FORM OF TILES; WALL OR CEILING COVERINGS OF PLASTICS, AS DEFINED IN NOTE 9 TO THIS CHAPTER HS Code SS Units Rate # 3918 FLOOR COVERINGS OF PLASTICS, WHETHER OR NOT SELF-ADHESIVE, IN ROLLS OR IN THE FORM OF TILES; WALL OR CEILING COVERINGS OF PLASTICS, AS DEFINED IN NOTE 9 TO THIS CHAPTER: Of polymers of vinyl chloride 5% 23 m2 Floor tiles Other floor coverings: 24 m2.not exceeding mm in width.exceeding mm in width:..of solid composition without a foam layer base: 25 m2...not exceeding 2 mm in thickness 26 m2...exceeding 2 mm in thickness 27 m2..of solid composition with a foam layer base..other: 28 m2...printed 29 m2...other 30 m2 Wall or ceiling coverings m2 - Of other plastics 5%

11 3919 SELF-ADHESIVE PLATES, SHEETS, FILM, FOIL, TAPE, STRIP AND OTHER FLAT SHAPES, OF PLASTICS, WHETHER OR NOT IN ROLLS HS Code SS Units Rate # 3919 SELF-ADHESIVE PLATES, SHEETS, FILM, FOIL, TAPE, STRIP AND OTHER FLAT SHAPES, OF PLASTICS, WHETHER OR NOT IN ROLLS: In rolls of a width not exceeding 20 cm 5% 71 kg Of polyester Of polymers of ethylene: 72 kg.of polyethylene.other: 73 kg..not exceeding 0.08 mm in thickness 74 kg..exceeding 0.08 mm in thickness 56 m2.tape Of polymers of propylene: 76 kg.other, including film 77 kg Of other plastics Other 5% 80 kg Of polyester 81 kg Of polyurethanes Of polymers of ethylene:.of polyethylene: 82 kg..not exceeding 0.08 mm in thickness 83 kg..exceeding 0.08 mm in thickness 84 kg.other 68 kg Of polypropylene 69 kg Of polyvinyl chloride 85 kg Of other plastics 3920 OTHER PLATES, SHEETS, FILM, FOIL AND STRIP, OF PLASTICS, NON-CELLULAR AND NOT REINFORCED, LAMINATED, SUPPORTED OR SIMILARLY COMBINED WITH OTHER MATERIALS HS Code SS Units Rate #

12 3920 OTHER PLATES, SHEETS, FILM, FOIL AND STRIP, OF PLASTICS, NON-CELLULAR AND NOT REINFORCED, LAMINATED, SUPPORTED OR SIMILARLY COMBINED WITH OTHER MATERIALS: Of polymers of ethylene 5% Of polyethylene:.not exceeding 0.08 mm in thickness: 22 kg..printed, embossed or otherwise surface-worked, except merely polished..other: 23 kg...low density 24 kg...other.exceeding 0.08 mm in thickness: 25 kg..printed, embossed or otherwise surface-worked, except merely polished..other: 26 kg...low density 27 kg...other Other: 28 kg.not exceeding 0.08 mm in thickness 29 kg.exceeding 0.08 mm in thickness Of polymers of propylene 5% Film:.Not exceeding 0.08 mm in thickness:..biaxially oriented: 01 kg...metallised 02 kg...other 03 kg..other 04 kg.exceeding 0.08 mm in thickness Tape: 05 kg.strapping 06 kg.other 07 kg Other kg - Of polymers of styrene 5% Of polymers of vinyl chloride: Containing by weight not less than 6% 5%

13 of plasticisers Rigid: 50 kg.not exceeding 0.08 mm in thickness 51 kg.exceeding 0.08 mm but not exceeding 0.25 mm in thickness 52 kg.exceeding 0.25 mm but not exceeding 0.5 mm in thickness 53 kg.exceeding 0.5 mm in thickness 57 kg 59 kg Flexible:.Not exceeding 0.08 mm in thickness: 61 kg.exceeding 0.08 mm but not exceeding 0.5 mm in thickness 62 kg.exceeding 0.5 mm in thickness Other 5% Rigid: 64 kg.not exceeding 0.08 mm in thickness 66 kg.exceeding 0.08 mm but not exceeding 0.25 mm in thickness 68 kg.exceeding 0.25 mm but not exceeding 0.5 mm in thickness 70 kg.exceeding 0.5 mm in thickness 72 kg 75 kg Flexible:.Not exceeding 0.08 mm in thickness: 77 kg.exceeding 0.08 mm but not exceeding 0.5 mm in thickness 79 kg.exceeding 0.5 mm in thickness Of acrylic polymers: kg -- Of poly(methyl methacrylate) 5% kg -- Other 5% Of polycarbonates, alkyd resins,

14 polyallyl esters or other polyesters: kg -- Of polycarbonates 5% Of poly(ethylene terephthalate) 5% Coated: 20 kg.copying film.other: 21 kg..drafting film 22 kg..metallised film..other: 30 kg...coated with an adhesive 31 kg...other Uncoated: 25 kg.not exceeding mm in thickness 26 kg.exceeding mm but not exceeding 0.38 mm in thickness 27 kg.exceeding 0.38 mm in thickness kg -- Of unsaturated polyesters 5% kg -- Of other polyesters 5% Of cellulose or its chemical derivatives: Of regenerated cellulose Free Coated: 02 kg.vinylidene chloride coated 38 kg.other 04 kg Uncoated kg -- Of vulcanised fibre Free kg -- Of cellulose acetate Free kg -- Of other cellulose derivatives Free Of other plastics: kg -- Of poly(vinyl butyral) 5% m2 -- Of polyamides 5% m2 -- Of amino-resins Free m2 -- Of phenolic resins Free Of other plastics 5%

15 14 kg Of polytetrafluoroethylene 31 kg Of polyurethanes 32 kg Of other plastics 3921 OTHER PLATES, SHEETS, FILM, FOIL AND STRIP, OF PLASTICS HS Code SS Units Rate # 3921 OTHER PLATES, SHEETS, FILM, FOIL AND STRIP, OF PLASTICS: Cellular: kg -- Of polymers of styrene 5% Of polymers of vinyl chloride 5% 40 kg Textile fabric coated or laminated on both sides 19 kg Other Of polyurethanes 5% kg -- Of regenerated cellulose 5% Of other plastics 5% Of polymers of ethylene: 22 kg.low density polyethylene 23 kg.other 42 kg Of other plastics Other: kg --- Of cellulose or its chemical Free derivatives, coated, covered or laminated Other 5% Of polymers of ethylene: 64 kg.low density polyethylene 65 kg.other 80 kg.film 81 kg.other Of polymers of propylene:

16 Of vinyl polymers:.textile fabric coated or laminated on both sides: 11 kg..plasticised 12 kg..unplasticised 67 kg.other Of other plastics: 74 kg.metallised polyester film.aminoplast or phenoplast laminated rigid sheets: 82 kg..high pressure laminates 83 kg..low pressure laminates 76 kg.other 3922 BATHS, SHOWER-BATHS, SINKS, WASH-BASINS, BIDETS, LAVATORY PANS, SEATS AND COVERS, FLUSHING CISTERNS AND SIMILAR SANITARY WARE, OF PLASTICS HS Code SS Units Rate # 3922 BATHS, SHOWER-BATHS, SINKS, WASH-BASINS, BIDETS, LAVATORY PANS, SEATS AND COVERS, FLUSHING CISTERNS AND SIMILAR SANITARY WARE, OF PLASTICS: No - Baths, shower-baths, sinks and 5% wash-basins No - Lavatory seats and covers 5% No - Other 5% 3923 ARTICLES FOR THE CONVEYANCE OR PACKING OF GOODS, OF PLASTICS; STOPPERS, LIDS, CAPS AND OTHER CLOSURES, OF PLASTICS HS Code SS Units Rate # 3923 ARTICLES FOR THE CONVEYANCE OR PACKING OF GOODS, OF PLASTICS; STOPPERS, LIDS, CAPS AND OTHER CLOSURES, OF PLASTICS: Boxes, cases, crates and similar 5% articles For compact discs: 59 No.Complete assemblies (box and tray combined)

17 .Parts: 60 No..Boxes (jewel cases) only 61 No..Trays only Other Other: 56 kg.of polymers of styrene or of polymers of vinyl chloride 57 kg.of polymers of ethylene or of propylene 58 kg.of other plastics Sacks and bags (including cones): Of polymers of ethylene 5% Shopping bags not designed for prolonged use:.of polyethylene: 24 kg..low density 25 kg..other 26 kg.other Other:.Polyethylene: 27 kg..low density 28 kg..other 29 kg.other kg -- Of other plastics 5% Carboys, bottles, flasks and similar 5% articles 51 kg Of polymers of styrene or of polymers of vinyl chloride 52 kg Of polymers of ethylene or of propylene 53 kg Of other plastics Spools, cops, bobbins and similar 5% supports 01 No Of polymers of ethylene or of propylene Of other plastics: 89 No.Audio cassette bodies.other: 85 No..Video cassette bodies, incorporating spools (V-zero)

18 86....Other Stoppers, lids, caps and other closures 5% 58 kg Of polymers of styrene or of polymers of vinyl chloride 59 kg Of polymers of ethylene or of propylene 60 kg Of other plastics Other 5% Of polymers of ethylene or of propylene: 07 No.Collapsible plastic tubes 08 No.Other Of other plastics: 09 No.Collapsible plastic tubes 10 No.Other 3924 TABLEWARE, KITCHENWARE, OTHER HOUSEHOLD ARTICLES AND TOILET ARTICLES, OF PLASTICS HS Code SS Units Rate # 3924 TABLEWARE, KITCHENWARE, OTHER HOUSEHOLD ARTICLES AND TOILET ARTICLES, OF PLASTICS: Tableware and kitchenware 5% Other 5% 09.. Of polymers of ethylene or of propylene 10.. Of other plastics 3925 BUILDERS' WARE OF PLASTICS, NOT ELSEWHERE SPECIFIED OR INCLUDED HS Code SS Units Rate # 3925 BUILDERS' WARE OF PLASTICS, NOT ELSEWHERE SPECIFIED OR INCLUDED: No - Reservoirs, tanks, vats and similar 5% containers, of a capacity exceeding 300 L Doors, windows and their frames and 5%

19 thresholds for doors Shutters, blinds (including Venetian 5% blinds) and similar articles and parts thereof 93.. Of polymers of styrene, ethylene or of polymers of vinyl chloride 94.. Of other plastics Other 5% 3926 OTHER ARTICLES OF PLASTICS AND ARTICLES OF OTHER MATERIALS OF 3901 TO HS Code SS Units Rate # 3926 OTHER ARTICLES OF PLASTICS AND ARTICLES OF OTHER MATERIALS OF 3901 TO : Office or school supplies 5% 61.. Of polymers of styrene 62.. Of polymers of ethylene or of propylene 63.. Of other plastics Articles of apparel and clothing accessories (including gloves, mittens and mitts): Corset busks 5% Garments: Anti-radiation suits, 5% anti-contamination suits, and similar protective garments No ---- Other 25% DC:20% From 1 January % DC:12.5% Other Free Fittings for furniture, coachwork or the like: Of a kind used as components in 15% passenger motor vehicles DC:10% DCS:10% CAN:10% From 1 January % DC:5% CAN:5%

20 From 1 January % Other 5% Statuettes and other ornamental articles 5% Other: Of a kind used as components in 15% passenger motor vehicles DC:10% DCS:10% CAN:10% From 1 January % DC:5% CAN:5% From 1 January % Other 5% Of polymers of ethylene or of propylene: 82 No.Tarpaulins 87...Other 88.. Of other plastics