Adjustable Suspension Hanger Technical Datasheet

Transcription

1 Adjustable Suspension Hanger sheet The Adjustable Suspension Hangers Clip are a component of the Keylock Ceiling System. The upper vertical side of the hanger allows the Suspension Rod that goes through it to be adjusted in accordance to your preferred height. The lower side of the hanger is specially designed and manufactured in order to provide a vertical support to the loads that hang from the ceiling (i.e. ceiling tile frame). Adjustable Suspension Hanger Applicable for Keylock Ceiling System Zinc Plated G43A Min. Yield Strength: 210 Mpa Min. Tensile Strength: 320 Mpa Mass (Kg) PN PN.2534 Top Cross Rail PN Typical Application Doc/PDS/FC/ASH/12/R0

2 Backing Rod sheet The Backing Rod is a cylindrical polyurethane or polyethylene foam material is often used to provide extra support and set the proper depth of material for sealants in expansion and construction joints including tilt slab construction. Backing Rod Applicable for all s Standard Length (meters) 200/ 500 Color White & Grey Polyethylene Foam Diameter Length (meter) Density (g/cm3) Doc/PDS/FC/BR/12/R0

3 Column Encasement Clip sheet The Column Encasement Clip is designed to be used with the Furring Channel Track in order to encase a clanged column (I- Beam) up to 16 mm flange thickness. Beam Encasement Clip Applicable for Liner System AZ150 Zinc- Aluminium Alloy G550 Min. Yield Strength: 550 Mpa Min. Tensile Strength: 550 Mpa Mass (Kg) MBCL RONDO Column Encasement 800mm centers max. I-Section steel column flange Continuous RONDO PN.140 Furring Channel Track Plasterboard as required Typical Application Doc/PDS/FC/CEC/12/R0

4 Direct Fixing Clip (Beta Fix) sheet The adjustable Direct Fixing Clips - Betafix are a component of the Keylock Ceiling System. The Adjustable Direct Fixing Clip is used as a direct fixing of furring channels and battens to either concrete, steel or timber wall or ceiling structures. These clips need to be fixed along the sections in accordance with the relevant maximum span tables. Masonry fasteners should be selected in accordance to specific recommendations. Direct Fixing Clip (Beta Fix0 Applicable for Keylock Ceiling System Z180 Zinc G2 Min. Yield Strength: 270 Mpa Min. Tensile Strength: 330 Mpa Mass (Kg) Betafix Doc/PDS/FC/DFCBF/12/R0

5 Direct Fixing Clip with Anchor sheet The Direct Fixing Clip with Anchor is an ideal component for battening out irregular walls. For surafces that do not require any allignment but would require a cavity for cables or plumbing, the Battens should be used. These clips are used as a direct fixing of furring channels and battens to either concrete, steel or timber wall or ceiling structures. The Direct Fixing Clips need to be fixed along the sections in accordance with the relevant maximum span tables. Direct Fixing Clip with Anchor Keylock Ceiling System & Liner System AZ150 Zinc- Aluminium Alloy G300 Min. Yield Strength: 300 Mpa Min. Tensile Strength: 340 Mpa Mass (Kg) A PN. 239A Furring Channel Typical Application Doc/PDS/FC/DFCWA/12/R0

6 Furring Channel Anchor Clip sheet Furring Channel Anchor Clips are the ideal component for battening out regular walls and for surfaces which do not require any alignment. Furring Channel Anchor Clip Applicable to Keylock Ceiling System AZ150 Zinc- Aluminium Alloy G300 Min. Yield Strength: 300 Mpa Min. Tensile Strength: 340 Mpa Mass (Kg) Furring Channel Typical Application Doc/PDS/FC/FCAC/12/R0

7 Furring Channel Joiner sheet The Furring Channel Joiners are a component of the Keylock Ceiling System, whereby it joins the Furring Channels from end to end. Furring Channel Joiner Applicable to Keylock Ceiling System AZ150 Zinc- Aluminium Alloy G300 Min. Yield Strength: 300 Mpa Min. Tensile Strength: 340 Mpa Mass (Kg) PN.138 Furring Channel PN. 138 Typical Application Doc/PDS/FC/FCJ/12/R0

8 Head Bracket sheet The Head Brackets consist of a U shaped stamped steel body part with 2 holes on each side of the flanges into which necked vibration break rubbers are fitted allowing for dampened connections to the Z-Z-Stud through the corresponding holes in the Z-Z-Studs by the means of 2 heavy bolts embedded in necked rubbers. Head Bracket Applicable for Cinema System GI or Painted MS No. of Holes Hole Dimension Hole Centre Doc/PDS/FC/HB/12/R0

9 Hex Head Screws sheet Hex Head Screws are self drill point zinc plated screws for heavy gauge metal to metal fastening from 0.7mm to Max. 2.5mm thick. Hex Head Screws Applicable for Partition, Liner & Cinema System Standard Compliance AS Yellow Zinc finish, white or black phosphated Sizes M4.8 x 19 DP M4.8 x 25 DP M4.8 x 32 DP M4.8 x 50 DP M5.5 x 25 DP M5.5 x 32 DP M5.5 x 50 DP Doc/PDS/FC/HHS/12/R0

10 KDM/L Anchors sheet High wrench resistant 6 mm diameter anchor made of a special steel shaft and cone for forced expansion. The shaft is threaded on one side and has an expansible split part on the other side. Suitable for Fire Rated Systems. They are specially used for fixing of hangers, brackets, and all kind of drywall profiles to concrete slabs where high work load, safety and extreme rapidity of installation is required. KDM/L Anchors Standard Compliance ETA 04/0026 Pull Out Work Load Shear Load (Cutting Strength) Applicable for all s 1.41 KN 5.16 KN Sizes 6 x 40 Doc/PDS/FC/KDMLA/12/R0

11 KDM/N Anchors sheet KDM-N Anchors are a high wrench resistant [6 mm x 65 mm] anchor made of a special steel shaft and cone for forced expansion. The shaft is threaded on one side and has an expansible split part on the other side. Suitable for fire-rated systems. KDM/N Anchors Applicable for all s except Ceiling System Standard Compliance ETA 04/0026 Pull Out Work Load 1.41 KN Shear Load (Cutting Strength) 5.16 KN Sizes 6 x 65 Doc/PDS/FC/KDMNA/12/R0

12 KMU/L Anchors sheet High wrench resistant 6 mm diameter anchor made of a special steel shaft and an internal 6 mm thread part and a cone for forced expansion. The shaft is threaded on one side and has an expansible split part on the other side. Suitable for Fire Rated Systems. For suspensions from concrete slabs by the means of threaded rods to brackets supporting all kinds of drywall profiles where high work-load, safety and extreme rapidity of installation is required. KMU/L Anchors Standard Compliance ETA 04/0026 Pull Out Work Load Shear Load (Cutting Strength) Applicable for Ceiling System 1.41 KN 5.16 KN Sizes 6 x 40 Doc/PDS/FC/KMUL/12/R0

13 KSD Plugs sheet Shear-load resistant 6 mm diameter plug made of 'Sherard' zinc quoted spring steel consisting of a lengthwise cut cylinder with a nail like outline. It is a one piece 'hammer-in' type fastener suitable for shear-load only. They are commonly used for fixing of Drywall Profiles to bottom concrete slabs only. They are also used for fixing of wall angles to peripheral concrete walls. KSD Plugs Mechanical Resistance to Wrenching 2.7 KN (Concrete B 45) Applicable for Partition, Ceiling or Liner System Sizes 6 x 30 6 x 40 Doc/PDS/FC/KSD/12/R0

14 Laminating Screws sheet Laminating Screws are fasteners for directly laminating gypsum boards together when used in more than 2 layers as well as fastening accessories to multiple gypsum board layer linings. Laminating Screws Applicable for Partition, Shaftwall & Cinema System Yellow(white) Zinc Finish/ Black Phosphated Rust Protection Anti- corrosion treatment by yellow zinc coating/ phosphate process Standard Compliance ASTM C Sizes M4.2 x 32CS M4.2 x 38CS Doc/PDS/FC/LS/12/R0

15 L Bracket sheet The L Bracket is a simple rigid structure in the shape of an L, one arm fixed to a vertical ( Stud ) surface, the other projecting horizontally fixed to the support such as Wall, Ceiling or Slab. L Bracket Applicable for Partition & Liner System Z180 Zinc G2 Min. Yield Strength: 270 Mpa Min. Tensile Strength: 330 Mpa Width PN x 50 PN x 75 Doc/PDS/FC/LB/12/R0

16 Phoenic Hanger sheet The Phoenic Hangers are strong brackets designed in various shapes and dimensions of which the upper or lower horizontal part presents an inserted vibration rubber part. This disposes an internal threading for a 8 mm threaded rod which in turn provides an efficient vibration break even at low frequencies, separating acoustically the structure from the ceiling. Acoustic Workload Safety Specifications Load Critical Frequency Phoenic Hanger Applicable for acoustic Ceiling System 30 to 70 Kg An incorporated safety device will retain the threaded rod suspension system in case of fire and burning off of the rubber. In this case, the ceiling will descend by 14 mm. Used for acoustic ceiling system consisting of two or three layers o 15mm Firewall panels screw-fixed to Gypsemna furring channels & backed with a low density 75 to 100 mm fibre glass blanket. Vibration absorption with Phoenic U Hanger in % Reference frequency in Hz dan Hz Doc/PDS/FC/PH/12/R0

17 Locking Key Joiner sheet The Locking Key Joiners are a component of the Keylock Ceiling System whereby the Top Cross Rail is connected to the Furring Channel. Locking Key Joiner Applicable for Keylock Ceiling System AZ150 Zinc- Aluminium Alloy G300 Min. Yield Strength: 300 Mpa Min. Tensile Strength: 340 Mpa Mass (Kg) PN. 139 Typical Application Doc/PDS/FC/LKJ/12/R0

18 Self Drilling Screws sheet Heavy duty drill point bugle head screw with head diameter of 8 mm, are self drilling fasteners for multiple layer drywalls, insulation and accessory mountings on steel structures up to 3.0 mm thickness. Self Drilling Screws Applicable for s Yellow/ white Zinc / Black Phosphated Finish Rust Protection Anti- corrosion treatment Standard Compliance ASTM C Hardened Steel Sizes M 3.5 x 35 DP M 3.5 x 45 DP M 3.5 x 55 DP M 4.2 x 70 DP Doc/PDS/FC/SDS/12/R0

19 Self Tapping Screws sheet Heavy duty self tapping bugle head screw with head diameter of 8 mm, are self tapping fasteners for multiple layer drywalls, insulation and accessory mountings on steel structures up to 0.8 mm thickness. Self Tapping Screws Applicable for s Yellow/ white Zinc / Black Phosphated Finish Rust Protection Anti- corrosion treatment Standard Compliance ASTM C Hardened Steel Sizes M 3.5 x 25 DP M 3.5 x 35 DP M 3.5 x 45 DP M 3.5 x 55 DP M 4.2 x 70 DP Doc/PDS/FC/STS/12/R0

20 Slotted Web Cleat sheet The Slotted Web Cleat is typically used to transfer loads in external wall situations where a deflection allowance is needed. It is required as the higher external wall pressures would cause a standard stud/track connection to be overloaded. Slotted Web Cleat Applicable for Partition System Z180 Zinc- Aluminium Alloy G2 Min. Yield Strength: 270 Mpa Min. Tensile Strength: 330 Mpa Length Width Height Mass (Kg) SWC3A SWC PN. SWC3 PN. SWC3 PN. SWC3a Doc/PDS/FC/SWC/12/R0

21 Sound Isolation Clip STSU sheet The Sound Isolation Clip STSU are specially designed as sound insulating systems to reduce sound transmission. Sound Isolation Clip STSU Applicable for Keylock Ceiling System AZ150 Zinc- Aluminium Alloy G300 Min. Yield Strength: 300 Mpa Min. Tensile Strength: 340 Mpa Mass (Kg) STSU PN. STSU Doc/PDS/FC/SICSTSU/12/R0

22 Sound Isolation Clip STSl sheet The Sound Isolation Clip (STSL) is specially designed for use as sound isolation system to reduce sound transmission. Sound Isolation Clip STSL Applicable for Partition, Lining & Ceiling System AZ150 Zinc- Aluminium Alloy G300 Min. Yield Strength: 300 Mpa Min. Tensile Strength: 340 Mpa Mass (Kg) STSL PN. STSL Doc/PDS/FC/SICSTSL/12/R0

23 Staggered Wall Clip sheet Staggered Wall Clips are designed to provide effective resistance to sound transmission and acoustic impact when lining boards are attached in various configurations. For ease of installation, place holding clips at the top and bottom of each stud then slide the studs and clips onto the tracks. Staggered Wall Clip Applicable for Partition System AZ150 Zinc- Aluminium Alloy G550 PN126 PN152 Doc/PDS/FC/SWC/12/R0

24 Suspension Rod Angle Bracket sheet Suspension Rod Angle Brackets are attached to the slab of the ceiling from one side and to the Suspension Rods from the other side. Suspension Rod Angle Bracket Applicable for Keylock Ceiling System AZ150 Zinc- Aluminium Alloy G300 Min. Yield Strength: 300 Mpa Min. Tensile Strength: 340 Mpa Mass (Kg) Bracket 274 fixed to trusses Typical Application Typical Application Doc/PDS/FC/SRAB/12/R0

25 Suspension Rod sheet The Suspension Rods are a component of the Keylock Ceiling System, whereby they are cut into the desirable length and then attached to the Suspension Rod Angle Bracket from one end and then into the Adjustable Suspension Hanger clip from the other end. Suspension Rod Applicable for Keylock Ceiling System Zinc Plated G43A Min. Yield Strength: 210 Mpa Min. Tensile Strength: 320 Mpa Length Mass (Kg) PN. 121 Doc/PDS/FC/SR/12/R0

26 Threaded Rod sheet The Threaded Rods are designed to be used in high tension due to being relatively long rods and being threaded. They are used as a ceiling suspension by being fixed to hard point on one end such as soffit of concrete slab/beam or steel structure with appropriate fasteners and ceiling frame on the other. Threaded Rod Applicable for Keylock Ceiling System Zinc Plated G43A Min. Yield Strength: 210 Mpa Min. Tensile Strength: 320 Mpa Mild Steel M / MATR30008ZP Length Mass (Kg) Doc/PDS/FC/TR/12/R0

27 Wafer Head Screws sheet Heavy duty drill point wafer head screw with head diameter of 11 mm. These screws are self drilling framing screws for thicknesses up to 2.5 mm. Heavy duty self drilling Wafer Head Screws are used for rapid power attachment of a steel framing member to another. Wafer Head Screws Applicable for all Yellow/ White Zinc Hardened Steel Standard Compliance ASTM C Size M4.2 x 13 DP Doc/PDS/FC/WHS/12/R0

28 C Clamp sheet The C-Clamp is a strong bracket to hold the main channel for suspended ceilings of limited loads by the means of 6 mm & 8 mm threaded rod. It will accommodate a 38 mm & 45mm main channel allowing for structural suspension centre s. C Clamp Applicable for Ceiling System & Cinema System Z150 Zinc Height Flange Width Doc/PDS/FC/CC/12/R0

29 Sound Isolation Clip STWC sheet The Sound Isolation Clip is specially designed for use as sound isolation system to reduce sound transmission. Sound Isolation Clip STWC Applicable for Partition & Liner System AZ150 Zinc- Aluminium Alloy G300 Min. Yield Strength: 300 Mpa Min. Tensile Strength: 340 Mpa Mass (Kg) Doc/PDS/FC/SICSTWC/12/R0

30 Acoustic V-braze sheet The Acoustic V-braze is a specially engineered product for bracing twin frame Drywall partitions. V-braze made with Spring steel to optimize acoustic performance on the Dry Wall System. Acoustic V-braze Applicable for Partition & Liner System AZ150 Zinc- Aluminium Alloy G300 Min. Yield Strength: 300 Mpa Min. Tensile Strength: 340 Mpa Doc/PDS/FC/AV/12/R0

31 Direct Fixing Clip-Furring Channel sheet The Direct Fixing Clip for Furring Channel is an ideal component for battening out Structural / Timber - Walls & Ceilings. For surfaces that require cladding the walls with gypsum boards & require a cavity for cables or plumbing, this clips can be used. These clips are used as direct fixing for furring channels to either steel wall frame or timber ceilings. The Direct Fixing Clips need to be fixed along the sections in accordance with the manufacturer s recommendations. Direct Fixing Clip for Furring Channel Applicable for Ceiling & Liner System AZ150 Zinc- Aluminium Alloy G300 Min. Yield Strength: 300 Mpa Min. Tensile Strength: 340 Mpa Mass (Kg) PN PN PN.394 PN.226 Furring Channel Furring Channel Doc/PDS/FC/DFCFFC/12/R0