ONLINE SEALED BID FORMAT FOR INTERIOR WORKS AT THODUPUZHA TOWN BRANCH (EXISTING PREMISES) FOR ACCOMMODATING RACC

Transcription

1 Page 1 of 6 ONLINE SEALED BID FORMAT FOR INTERIOR WORKS AT THODUPUZHA TOWN BRANCH (EXISTING PREMISES) FOR ACCOMMODATING RACC 2 Sl No. Description of work Unit Quantity Rate Amount 1 Officers Table No. 12 The size of the table is 150 X 75 X75 cm which is made of postform finish at top and 19mm thick plywood (IS 303) finished with 1.0mm thick laminate on outer sides. The table top is provided with 12mm thick glass. The 3 nos. Of Drawer units has to be provided are to be made of 12mm thick plywood (IS 303). Metal Keyboard tray, CPU stand and provisions of wire manager are to be given. Footrest with countrywood 7.5cm X 2.5cm should be provided. The edges should be provided with necessary lippings. Necessary fittings such as multi purpose locks for drawers, metal Keyboard & drawer slides, handles, wire manager etc. are to be provided. The inner portion of the table to be painted with enamel paint of 2 coats over one coat of wood primer. Front side of the table is finished with 12mm thick plywood over the 19mm thick plywood with necessary beadings. 2 Side Table The table is made of 19mm thick plywood (IS 303) finished with 1mm thick laminate on the other exposed faces as shown. 25 mm thick postformed / edgebanded top is to be provided. File racks should be provided with 19mm thick plywood door shutters and necessary lippings. CPU stand is provided in the side table. The inner sides are painted with 2 coats of enamel paint over a coat of wood primer. The table top is to be provided with 12mm thick glass. a) Size 120 X 45 No b) Size 100 X 45 No c) Size 150 X 45 No SINGLE WINDOW SYSTEM: 4 Providig and fixing of single window system without partitions as shown in the drawings comprising of each counter size 1500 to 1750mm & 2500length or as per layout and1200 mm height or as per layout with below specifications and provisions. Counter and writing top at front, with counter 1500 to 1750mm length and 1000mm width at about 750mm height. The top shall be fixed with 19mm plywood (IS303marine grade) of approved make with M

2 Page 2 of 6 width at about 750mm height. The top shall be fixed with 19mm plywood (IS303marine grade) of approved make with curved bend in front modesty as per drawing and fixed with white corian top of 6mm thick of approved brand. 18mm plywood of approved make for sides and for front shaped support and finished with 1mm laminate of approved colour. Front counter support for 750mm height with 18mm plywood finished with 1mm laminate of approved colour and shade. Below counter top additional 18mm plywood finished with 1mm laminate is fixed to pattern as shown.12mm thick clear float galss to shape with etching is fixed with SS glazed clips fixed at front (600mm) and sides (450mm) above the counter as shown in the drawing. Modesty fixed with 8 mm thick oa Aqua blue shade of Saint Gobain glass or equivalent fixed 3M stickering suitable at 18 mm thick plywood vertical finished with 1 mm laminate. The side partitions of the counter, boxing on either side to shape as shown in the drawing with 18 mm plywood of approved make and to be finished with 1 mm laminate of approved colour from floor level to 1200 mm level at places shown in the drawing. Necessary wicket shutters are to be provided using 18 mm plywood and finished with 1 mm laminate of approved colour and shape as shown in the One set of 3 drawers about 450mm width, 712.5mm height and 600mm deep supported with 18mm plywood at bottom sides and rear. Drawers 3 nos of equal height made out of 12 mm thicklamination of approved colour, with necessary lipping. Telescopic drawered slides, locking arrangements, 100mm long brush finish S.S handles etc complete. Top most cash drawer should be arranged with provision for denomination with 8mm thick plywood. Cash denomination seperation to be provided for 1 draw unit of the SWO, preferable the top draw with plywood. This draw unit has to be provided wiht automatic lock. M.S powder coated Telescopic keyboard and MS wire manager of 50mm dia of approved quality.foot rest cum CPU stand of required length with 18mm thickness plywood to shape as shown in the drawing. All concerned faces of MDF/ plywood finished with one coat of wood preservative paint and exposed faces of steam beach beading polished to the satisfaction of the Engineer. The inner side of the unit finished with 1 mm laminate. The MDF boards/ plywood and corain materials are as approved by the Bank. The rate should include locks, MS powder coated keyboard trays, telescopic drawer slides, 100 mm ss brush finish handle with necessary hardware fittings etc. complete. The rate of low partition is not included and is paid seperately 4 Low level Storage M

3 Page 3 of 6 Free standing storage with shutters in 19mm thick marine ply in postformed laminate finish. 19Mm thick marine ply for verticals and base & back 9mm thick Marine ply. Back to be flush with external surface of the storage unit, with beech wood lipping on all exposed edges, 25mm thk top postformed laminate adjustable shelves at approximately 40C/C with 19mm Marine ply and all necessary fittings like brush finished adjustable handles, aluminium channels, rollers Godrej/Hafle/ebco make locks, melamine coated beech wood skirting 10cm X 1cm etc. Rate to be inclusive of cost of materials, labour, wastage, transportation, necessary scaffolding, etc complete. Cabinets inside to have 2 coats of enamel paint over 1 coat of primer base. 5 Fully glazed Door M Providing and fixing frameless fully glazed 12mm thk toughened float glass fixed with necessary patch fittings (Dorma make) including cutting, making holes, cutouts in the glass of required shape and size to accommodate fittings and fixing the fittings in floors, soffits, jams including necessary fixtures, screws, sealant wherever required and SS cover over patch fittings. Rate shall include necessary etching film / LOGO, approved patch fitting locking systems, 1 pair of 600mm long S. S. (H Shape) Handles of approved make, floor springs, and any necessary hardware items.( DORMA MAKE Top Pivot - PT 24, Top Patch Fittings - PT 20, Bottom Patch fittings - PT 10, Floor Spring - BTS 75 V, Corner lock with strike plate and Euro Profile Cylinder - US 10, Handle - TG DIH600-32mm dia X 600mm length) / enox fittings 6 False Ceiling M Supplying and fixing suspended false ceiling with 12.5mm thick gypsum board over standard 18g GI 60cm c/c, including perimeter channels strictly as per the specifications of 'India Gypsum' to correct lines and levels finished with two coats of plastic emulsion paint of 7 approved make and shade with roller application including providing necessary openings for electrical fittings, security device etc. Plaster of Paris Cornices Rm Supplying and fixing Plaster of Paris cornices of width 4 below false ceiling and filling up the joints including all materials and labour for fixing including painting 2 coats with plastic emulsion paint over a priming coat. 8 Column Panelling M

4 Page 4 of 6 The frame work of column panelling should be of country wood (Thambakam, Chadachi) 5cm X 5cm both horizontally and vertically at 600mm c/c. 9mm thick plywood with 1mm thick laminate is then screwed to the 6mm thick plywood and design work to be done.teak / Beech wood polished beadings are to be provided. Skirting for a height of 10cm with 12mm thick teak wood planks with melamine matt finish should be provided. 9 Painting M Applying two coats of good quality plastic emulsion paint over one coat of putty for the walls 10 Laminated Partition M Providing and fixing partition made of 2" X 2" good quality wood frame at 2'-0" c/c both ways. Alternate vertical member above the false ceiling shall continue upto the RCC ceiling. Bottom member shall be 4" X 2" for skirting. The skirting shall be 3" high and provided with 10mm commercial board / ply, finished with 1mm thick laminate of approved shade on both sides. The Teak wood frame shall be fixed rigidly at floor level as well as RCC ceiling bottom. The frame shall be provided with 6mm thick commercial ply with 1.0mm thick approved shade laminate on both sides of the frame. All wood shall be coated with fire resistant paint. The item includes 1 1/4 " thick door shutter in partition made of 3" X 1" good quality wood frame at 1'-0" c/c both ways, 6mm thick commercial ply with laminate shall be fixed on both sides of frame with teak wood edging out of 1 1/4" X 3/4" all around the shutter. The rate includes necessary hardwares such as hinges, tower bolt, 6 lever locks (Godrej) etc. All exposed Teak wood shall be stained to approved colour and finished with melamine ( 2 or more coats of APCOLITE). The rate includes making provision for electric conduits and switch boxes. 11 Laminated / Glazed Partition M Same as item no. 10, but 6mm thick clear glass at 3'0" height to 7'height in place of plywood and laminate to be fixed with teak wood beading 30 X 20 mm complete with melamine polish on teak wood surface. Item inlcludes cost of etching etc. complete.

5 Page 5 of 6 12 Custom Made Low Height Partition: for CO cabinproviding and fixing in position of custom made low height partitions of the height 1500 mm as per shape shown in the drawing.ie. (750mm solid partition and 750mm glass above). Hardwood section of 50 x 50mm at about 600 mm centers vertically and 3 nos. horizontally of the same section at floor level, 750mm level and at 1200mm level. 50 x 25mm at 375 mm level all framed and fixed in position, 8 mm Plywood of approved quality finished with 1mm Laminate with grooves on both sides of approved color and shade. Top of the partition finished with laminate and 8mm thick clear float glass with etching is fixed over the partition with Dorma make (or) Equivalent make 'D' bracket of SS finish of 12mm thick. Alround the partition 75mm thick Dark color laminate is provided as show in the drawing and pattern.note: All concealed faces of the plywood and the frames should be finished with one coat of wood perservative paint and exposed faces of steam beach beading / laminate finish, molding to be polished to the satisfaction of the Bank and the Architect. M Semi Partitions M The partitions are made of 12mm thick glass to be fixed firmly to the beech / teak wood frame of size 5X5 cm polished with melamine matt finish for a height of 75cm above the solid partition The bottom portion of the counter partition is of double skin type for a height of 75cm (as per Bank's instruction) from the finished floor level. In the frame work, verticals and horizontals are made of country wood 5cm X 5cm to a maximum distance of 60cm and two verticals at edges with 5cm X 5cm teak wood. Frame work is covered with 6mm thick plywood (IS 303) on both sides and finished with 1mm thick laminate of approved make. The partition is firmly fixed to the floor. Necessary wicket doors with locking arrangement are to be provided (Godrej / Ebco). Necessary hinges, handles and tower bolts etc. are to be provided for the wicket door. Teak / beech wood polished beadings / grooves in laminate etc. to be provided. Skirting for a height of 10cm with 12mm thick planks of teak wood finished with melamine matt polish to be provided. The edges of the glass to be polished. 14 Flooring:- Providing and fixing 60 x 60 cm vitrified tiles, double charged, marble finish approved for flooring. Tile to be fixed to existing flooring using approved quality tile on tile adhesive. Basic price of tiles to be taken as Rs.65 per square foot 15 Dismantling of brick masonry and shifting of debris out of site including labour, tools etc. complete 16 Brick work in CM 1: 6 with country burnt brick of size 22.9x11.2x7 cm for superstructure M M2 9 M3 20

6 Page 6 of 6 17 Plastering with cement mortar 1:5 (1cement 5 sand) 12mm thick, one coat floated hard and travelled smooth for the wall surfaces including all staging works, watering,curing etc. complete. 18 Providing and fixing good quality hard wood door shutter of clear size 100 X 210 cm with double locking arrangement for Safe room and locker room 19 Providing and fixing good quality hard wood door frame for Safe room and locker room TOTAL GST 18% GRAND TOTAL M2 95 No 2 No. 2