ARM (civil) works of R.O. Building (Panchdeep Bhawan) for the year

Transcription

1 BILL OF QUANTITY ARM (civil) works of R.O. Building (Panchdeep Bhawan) for the year Item No. Estimated Cost Rs. 6,61,603. Description of Work Qty. Unit Rate in figure & word 1 Demolishing dry brick pitching in floors, drains etc. including stacking of materials and disposal of serviceable within 50 meter lead 2 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhets hold fast etc. complete and stacking within 50 meter lead (a) of area 3 Sq.m and below 3 Removing dry or oil bound distemper, water proofing, cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repair to scratches etc. complete 4 Removing white or colour wash by scrapping, sand papering preparing the surface smooth including necessary repair to scratches etc. complete 5 Dry brick on edge flooring required pattern with bricks of class designation 75 on a bed of 12 mm mud mortar including filling joints with local sand with (F.P.S) bricks complete 6 Pointing on brick work or brick flooring with cement mortar 1-3 (one cement is to fine sand) Flush / Rule pointing 4.00 m3 Cum. 6 Nos sq. m Amount

2 7 Repair two plaster of thickness 12mm-20mm in patches of area 2.5 and under including cutting the patches in proper shape raking joints in preparing and plastering the surface of wall including disposal of rubbish to the dumping ground within 50 m lead with cement mortar 1-4 (one cement and four fine sand) 8 40 mm thick marble chips flooring rubbed and polished to granolithic finish under 31mm thick C.C. 1:2:4 (one cement to coarse and is to 4 graded stone aggregate 12.5mm nominal size and top layer 9mm thick with white, black, chocolate, Grey, yellow or green marble chips of size from 4mm to 7mm nominal size made in cement marble powder mix 3:1 (three cement : 1 marble powder) by weight in proportion 4:7 (4 cement marble powder : 7 marble chips) by volume including cement slurry etc. complete Medium shade pigment with 50 percent white cement and 50 percent ordinary cement. 9 Marble chips skirting up to(30cm height) rubbed and polished to granothilic finish top layer 6mm thick with white, black, chocolate, Grey, yellow or green marble chips of size 4mm laid in cement marble powder mix 3:1 ( 3 cement: 1 marble powder) by weight in proportion 4:7(4 cement marble mix : 7 marble chips by volume) medium shade pigment with 50 percent white and 50 percent

3 ordinary cement. 10 Providing and fixing glass strips in joints of Terrazzo / cement concrete floor 40mm wide and 4mm thick 11 Providing wood work in frames of doors, windows clerestory windows and other frame, wrought framed and fixed in position. Sal wood 12 Providing and fixing ISI marked flush door shutters confirming to IS 2202 (Part I) non decorative type core of block board constructions with frame of first class hard wood and well matched commercial ply veneering with vertical grains or cross bands and face veneers or both faces of shutters. 35mm thick including ISI marked stainless steel but hinges with necessary screws. 13 Providing and applying plaster of Paris putty 2mm thickness over plastered surface to prepare the surface even and smooth. 14 Finishing wall with water proofing cement paint of required shade two or more coats applied at the rate of 3.84 kg per Painting with synthetic enamel paint of approved brand and manufactured of required colour to give an even shade. (a) one or more coat on old work (b) On new work two or more coats over and under coat of suitable shade with ordinary paint of approved brand and m s q.m 7.86sq. m Mtr.

4 manufactured 16 Distempering with oil bound washable distemper of approved brand and manufactured to give an even shape. New work (2 or more coats) over and including priming coat of cement primer 17 Finishing wall with deluxe multi surface for interior and exterior using primer as per manufacturer specification. 2 or more coats applied at the rate of 1.25 liter per 10 over and including 1 coat of special primer applied at the rate of 0.75m per Providing and fixing decorative high pressure laminated sheet of plain / wood grains in glass / matt / Suede finish with high density protective surface layer and reverse side of adhesive bounding quality confirming to IS 2046 type-s including cost of adhesive of approved quality. 1.5mm thick 19 Providing and fixing in wall lining flat pressed three layer(medium density) particle board or graded wood prelaminated one side decorative lamination on other side balancing lamination grade-i type-ii IS marked including priming coat of unexposed surface with necessary fixing arrangement and screws complete. 12mm thick 20 Providing and fixing 100mm vertical blind VITA Leveller sq. m

5 or brand having 1.2mm to 1.3mm wall thickness head rail 20mm to 25mm high * 40mm to 50mm white exturuded high strength aluminium alloy section which is cenodisd for smooth and corrosion resistance finish for which it has end control unit stato of and plenthary reduction gear box having the reduction ration of 3:1 to 6:1. The end control unit has a sprocket fixed with it which is driven by the tiltler chain made of 4.5mm plastic beads moulded on 2.2mm thich polyester cord which rotate the lower by 180. The tilting operation to be smooth. End control unit has tilt rod fixed to it which is of 5.8mm to 6mm average diameter and made of extruded aluminium wit h three key ways to achieve torsional deflection carriers runners made of moulded plastic having antifriction additive which has gear and worm mechanism to hold the louvers and in driven by tilt ord to rotate the louver. Proper spacing of runner is maintained by spacers made of moulded decline / stainles s steel having fiction additives spacers ensures overlapping of louvers which are main window. CUBICAL IN REVENUE RECOVERY BRANCH 21 Providing and fixing in wall lining flak pressed three layer (medium density) particle board or graded wood prelaminated one side decorative or other side 12.6

6 balancing lamination grade-i type-ii IS marked including priming of unexposed surface with necessary fixing arrangements etc. complete (a) 18mm thick (b) 25mm thick 22 Providing and fixing glazing in aluminium door, windows ventilators and partitions etc. with PVC neoprene gasket etc. complete as per the architectural drawing and direction of engineering charge. With float glass panes 8mm thick 23 Providing and fixing 2 nd class tak wood lipping / moulded beeding or Taj beading of size 18x5mm fixed with wooden adhesive of approved quality and screws / nails on the edge of the prelaminated particle board as per direction of engineer in charge. 24 Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per direction of engineer in charge. 25 Providing and fixing specified wood frame work consisting of batten 50x50mm fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming coat complete (a) Gamhar/Hollock wood. 26 Providing and fixing special quality bright finished brass cup board or ward robe locks with four levers including necessary screws etc m Mtr. 6 Nos Nos.

7 complete(best make of approved quality) 40mm 27 Renewing glass panes with putty and nails wherever necessary. Float glass panes of thickness 4mm. 28 Providing and fixing bright finished brass casement window stay with necessary screws etc. complete. 300mm weighing not less than 330 grams. 29 Providing and fixing bright finished brass casement window fastener with necessary screws etc. complete HORTICULTURE WORK 30 Trenching in ordinary soil upto a depth of 60 cm including removal and stacking of serviceable materials and then disposing of by spreading and neatly levelling within a lead of 50m and making up the trench ed area to proper levels by filling the earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure) 31 Supplying and stacking good earth at site including royalty and carriage up to 1 km (earth measured in stacks would be reduced by 20 percent) 32 Supplying and stacking at site dump manure from approved source including carriage up to 1 km ( manure measured in stacks will be reduced by 8 percent for payment) Nos. 40Nos

8 Screened through sieve of IS designation 16 mm 33 Renovating lawn including weeding the grass, forking the ground, top dressing the sludge or manure mixing with same forked soil watering and maintaining the lawn for 30 days or more till grass form a thick lawn free from weeds and fit for moving and disposal of rubbish as directed including supplying good earth of needed but excluding the cost of sludge or manure (the good earth shall be paid separately) 34 Supplying Mali (gardener) from day to day maintainence of garden / horticulture work to Providing and laying the position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level 1:1 ½ :3 (1 cement: 1 1/12 coarse sand : 3 graded stone aggregate 20mm nominal size) 36 Brick work with F.P.S bricks of class designation 75 in foundation and print in cement mortar 1:6 (one cement 6 coarse sand) 37 Steel work welded in built up section / framed work including cutting hoisting and fixing in position and applying priming coat of approved steel primer. In stringer, frame, guard bar, ladder, railing gate etc. 38 Providing and fixing hard drawn steel wire fabric 25x25mm mesh to window sq. m 160 nos kg kg 4.5

9 frame etc. 39 Supplying and fixing rolling shutters of approved make made of required size MS lath interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with bracket, side guide and arrangement for inside and outside locking arrangement with push and pull operation complete including the cost of priming and fixing 27.5cm long wire spring grade NO.2 MS top cover of rolling shutters 80x1.2mm laths with 1.2mm thick top cover. WATER SUPPLY AND SANITARY INSTALLATION 40 Providing and fixing water closet pan/indian type W-c Pan with 100mm sand cast iron P or S trap, 10 liters low level white P.V.C flushing system with manually controlled device (handle lever) confirming to IS 7231 with all fitting and fixtures complete including cutting and making good the walls and floors wherever required. White vitreous china orissa pattern WC Pan of size 580x440 mm with integral type foot rest. 41 Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fittings complete. Flexible pipe 32mm diameter 42 Providing and filling the joints with spun yarn cement No. 20 Nos. 40 nos.

10 slurry and cement mortar 1:2 ) (1 cement and 2 fine sand ) in SCI / CI Pipe 100mm diameter pipe 43 Providing and fixing PTMT 15mm urinal spreader size 95 x69 x100mm with half inch BSP thread and shapes weighing less than 60grams 44 Provincial and fixing PTMT urinal cock of approved quality and color 15mm nominal bore 80mm long 42mm high and 30mm wide BSP female thread. 45 Providing and fixing C.P brass long nose bib cock of approved quality confirming to IS standard and weighing not less than 810 grams 15mm nominal bore. 46 Providing and fixing C.P brass stop cock of standard design of approved make confirming to IS mm nominal bore 47 Providing and fixing PTMT pillar cock of approved quality and color 15mm nominal bore, 125mm long home flow 48 Providing and fixing uplasticized P.V.C connection pipe with brass union 45cm length 15mm nominal bore 49 Providing and fixing ball valve (brass) of approved quality high or low pressure with plastic floats complete 20 mm nominal bore 50 Providing and fixing gun metal get valve with CI wheel of approved quality. 25mm nominal bore 12 nos. 9 nos. 10 nos. 10 nos. 10 nos. 20nos. 2 nos. 3 nos. 51 Cleaning of water storage 12 nos.

11 tank P.V.C and R.C.C with bleaching powder and potassium per magnate all complete during the year nos.x3 52 Supply of unskilled / skilled labour /mazdoor for day to day maintainance work of water supply sanitary system during the year (a) Plumber / fitter (b) helper / mazdoor/sweepers 90 nos. 100 nos. each signature of the contractor Dated:

12 BILL OF QUANTITY ARM (civil) works of 82 staff quarters at Digha for the year Estimated Cost Rs. 12,58,800. Item No. Description of work Qty. Unit Rate in figure & word 1 Clearing grass and removal of rubbish upto distance of 50m outside the periphery of the area cleaned. 2 Repair of plaster of thickness 12mm-20mm in patches ofarea 2.5 and under including cutting the patches in proper shape raking out joints and preparing and plasting the surface of the walls complete including disposal of rubbish to the dumping ground within 50m lead. With cement mortar 1:4 (1 cement and four fine sand) 3 Dismantling of old plasters or skirting raking of joints and cleaning the surface for plaster and including disposal of rubbish to the dumping ground within 50m lead. 4 15mm cement plaster on rough side of signal or half brick wall finished with a floating coat of neat cement of mix 1:3 (one cement and three fine sand) 5 12mm cement plaster or mix 1:4 (one cement and four fine sand) 6 White washing with line to give an even shape (a) old work two or more coats q.m Finishing wall with water proofing cement paint of required shade (a) old work(one or more coats applied at the rate of 2.2kg per 3282 Amount

13 10) over priming coat or primer applied at the rate of 0.8litre per 10 complete including cost of priming coat. 8 Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with black anti corrosive bitumastic paint of approved brand and manufacture on old work. (a) 100mm diameter (b) 150mm diameter 9 Painting with synthetic enamel paint of approved brand and manufacture required color to give an even shape (a) one or more coats on old work (b) Painting with synthetic enamel paint of approved brand and manufactured of required color to give an even shape to or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufactured 10 Providing and fixing panelled or pannelled and glazed shutters of doors, windows and clerestory windows including ISI marked black enamel MS butt hinges with necessary screws excluding paneling which will be paid for separately 35mm thick Hollow/Gamhar wood 11 Providing and fixing panelling and glazing in panelled or glaze shutters or doors windows and clerestory windows (area of opening for panel inserds excluding portion inside groove or redbate to be measured ) panelling for panelled or panelled or glaze shutters 25mm to 40mm thick Plain particle board flat 3 layer or graded wood particle board medium density grade-i IS 3087 marked. 336m 100m sq.m M m 22.05

14 12 Welding by gas or electric plant including transporatation of plant at site etc. complete 13 Providing and fixing aluminium sheet 1mm thick for cladding door of bathroom including costof necessary nails, screws and wooden battens all complete as directed by Engineer In charge. 14 Providing and fixing on wall face unplasticised rigid P.V.C rain water pipes confirming to IS Type-A including jointing with sealring leaving 10mm gap for thermal expansion (a) 110mm 15 Providing and fixing glazed shutters for doors, windwos and clerestory windows using 4mm thick float glass pans including black enamelled ISI marked M.S butthinges with necessary screws. Seasoned and chemically treated hollow/gamhar wood. 30mm 16 Providing and fixing ISI marked oxidised M.S fitting for doors and windows. (a) sliding door bolts with nuts and screws etc. complete (I) 250x16mm (ii) Tower bolts 150 x10mm (iii) handles 125mm 17 Providing and fixing stainless steel A ISI : 304(18/8) kitchen sink as per IS with CI brackets and stainless steel plug 40mm including painting of fittings and brackets cutting and making good the walls wherever required. 610x510mm bowl depth 200mm 18 Providing and fixing wash basin with CI brackets 15mm CP brass pillar taps, 32mm CP brass waste of standard pattern including painting of fittings and brackets 250cm Cm m m nos. 30nos. 30nos. each each 34 nos. 10 nos.

15 cutting and making good the walls. 19 Providing and fixing water closet squatting pan (Indian type W./C. Pan) with 100mm sand iron P or S trap. 10 litre low level white P.V.C flushing cistern with manually controlled device (handle lever) confirming to IS : With all fittings and fixtures complete including cutting and making good the walls and floors wherever required. (a) White Vitreous china orissa pattern W.C. Pan of size 580x440mm with integral type foot rests. 2nos. each 20 Providing and fixing CP brass bib cock of approved quality 15mm nominal bore 21 Providing and fixing CP brass stop cock of standard design and approved make 15mm nominal bore 22 Providing and fixing ball valve (brass) of approved quality high or low pressure with plastic float 20mm nominal bore 23 Providing and fixing gun metal get valve with CI wheel of approved quality (screwed end) (I) 32mm nominal bore (ii) 50 mm nominal bore 24 Providing and fixing P.V.C connection pipe with brass union 45cm length 15 mm nominal bore 25 Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fitting complete semi rigid (I) 32mm diameter (ii) 400mm diameter 26 Providing and fixing CP brass shower rose with 15 or 20mm inlet 150mm 40 nos. 20nos. 20nos. 5nos. 5 nos. 20nos. 20nos. 32nos. 10nos. each each

16 27 Providing and fixing soil waste and vent pipe 100mm diameter sand cast iron S & S pipe as per IS Providing and fixing bend of required degree with access door insertion rubber washer 3mm thick bolts and nuts. Sand cast iron as per ISI marked 1729 (I) 100 diameter (ii) 75mm diameter 29 Renewing glass pans with putty and nails wherever necessary float glass pans of thickness 4mm 30 Providing and fixing PTMT pillar cock of approved quality and color 15mm nominal bore 125mm long foam flow weighing not less than 120 gram 31 Chipping of floor and wall for receiving cement mortar for laying tiles 32 Cleaning of water storage tank during the year with bleaching powder and potassium per magnet (a) RCC over head tanks capacity litre (1x3 times) (b) P.V.C water storage tank capacity 1000 litres (3x24times) 11mtr. 10 nos. 10nos. Mtr. each nos nos. 72 nos. 33 Supplying skilled and unskilled mazdoor for day to day maintainance work of water supply sanitary and sewage disposal and cleaning of drains etc (a) Pump operator (b) Plumber helper/mazdoor/sweeper 304 nos. 150 nos. 250nos. each each signature of the contractor Dated:

17 BILL OF QUANTITY Name of work ARM (civil work) of Branch office at Katihar for the year Estimated cost: 1, 72,317 Item No. Description of Work Qty. Unit Rate in figure & word 1 Repair to plaster of thickness 12mm to 20mm in patches of area 2.5 and under including cutting the patches in proper shape racking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50m lead With Cement mortar 1:4 ( 1 cement : 4 fine sand) 2 Demolishing old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50m lead 3 12mm thick cement plaster of mix 1:6 (one cement : 6 fine sand) 4 15mm thick cement plaster on rough side of single or half brick wall of mix 1:6 (1 cement : 6 fine sand) 5 Brick work with F.P.S bricks of class designation 75 in foundation and plinth cement mortar 1:4 (1 cement : 4 coarse sand) 6 Finishing wall with water proofing cement paint of required shade old work (one or more coasts applied at the rate of 2.2 kg per 10 over priming coat and primer applied at the rate of 0.8 litres per 10 )complete including cost of primer coat 7 Providing and fixing glazed shutters for doors and windows sq. m Sq.m Amount

18 and clerestory windows using 4mm thick float glass pans including black enameled ISI marked MS butt hinges with necessary screw 30mm thick hollow / gamhar wood 8 Providing and laying rectified ceramic floor tiles 300x300mm or more (thickness to be specified by manufacturer) of first quality of approved make in colours white Ivory, grey, fume red, brown laid on 20mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement matching pigment complete 9 Providing and fixing first quality ceramic glaze wall tiles (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer in charge in skirting riser of steps and dados over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry at the rate of 3.3 kg per including pointing in white cement mixed with pigment of matching shade complete. 10 Providing and fixing white vitrous china flat back or wall corner type lipped out front urinal basin of 430 x 260 x 350 and 340 x 410 x 265 mm size respectively with automatic flushing cistern with standard flush pipe and C.P. Brass spreaders with brass unions and GI clamps complete including painting of fittings and brackets cutting and making good the walls and floors wherever required one urinal basin with 5 litres white P.V.C automatic flushing cistern no.

19 11 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade one or more coats on old work 12 Cleaning grasses and removal of the rubbish up to distance of 50 metre outside the periphery of the area clean. 13 Renewing glass pans with putty and nails wherever necessary float glass pans of thickness 4mm signature of the contractor Dated: