ENGINEERED RELOCATABLE BUILDINGS

Transcription

1 ENGINEERED RELOCATABLE BUILDINGS THE NEXT GENERATION FABRIC BUILDING

2 THE NEXT GENERATIO FROM GUARD-ALL B OUTER FABRIC MEMBRANE KEDER RAIL STEEL TRUSS SIDE WALL GIRT RADIANT BARRIER INSULATION INNER FABRIC MEMBRANE X-CABLE BASE PLATE red blue green sandstone white

3 N FABRIC BUILDING UILDING SOLUTIONS PEAK ROOF TRUSS PURLIN EAVE PURLIN K-BRACE PURLIN END TRUSS ROLL UP DOOR END WALL COLUMN END WALL BEAM slab on grade ballast blocks poured piers PIP: poured in place walls helical anchors and piers 3

4 CENTURION SERIES The Guard-All next generation fabric building is A precision-engineered to fully support all wind and snow loads without reliance on secondary support from the fabric membrane. The architectural fabric C membrane is a durable, high-density polyethylene weave coated to resist moisture, UV exposure and fading. A B C D An assortment of accessories are available B for these buildings including: Overhead doors, entrances, windows, lighting, ventilation, interior liners, insulation, hvac, fire suppression systems and much more. Finish out the building D with an interior liner and insulation to provide climate control in any region. CENTURION SERIES The Centurion Series is a gable profile next generation fabric building optimized for projects requiring massive unobstructed openings, high side wall clearances and elevated ceiling heights. A range of widths from 40' (12.1 m) to 140' (42.6 m) are available to meet a wide variety of project specifications. The continuous segmented truss design allows the building to achieve nearly any length required. The truss frame is available in either a 36" (.9 m) or 48" (1.2 m) depth, and reinforced with purlins and structural cables to meet the wind, snow and dead loads required for each individual project. Widths: 40' (12.1 m), 50' (15.2 m), 60' (18.2 m), 70' (21.3 m), 80' (24.3 m), 90' (27.4 m), 100' (30.4 m), 110' (33.5 m), 120' (36.5 m), 130' (39.6 m), 140' (42.6 m) Leg Heights: 13' (3.9 m), 18' (5.4 m) Truss Depths: 36" (.9 m), 48" (1.2 m) 4

5 HERITAGE SERIES The translucent membrane A material admits natural ambient light which reduces operational costs by decreasing artificial lighting requirements. A B C Flexible foundation options allow C buildings to be installed on a variety of surfaces; including slab on grade, piers, pony walls and concrete blocks. The fabric membrane roof is installed panel by B panel between trusses using a Keder system which provides ease of installation and the ability to replace individual panels for maintenance. HERITAGE SERIES The Heritage Series is our arch profile next generation fabric building optimized for projects requiring huge unobstructed openings, high side wall clearances and elevated ceiling heights. A range of widths from 32' (9.7 m) to 82' (24.9 m) are available to meet the project specifications. The continuous segmented truss design allows the building to achieve nearly any length required. The truss frame, available in either 12" (.3 m), 21" (.53 m) or 36" (.91 m) depth, is reinforced with purlins and structural cables to meet the wind, snow and dead loads required for each individual project. Widths: 32' (9.7 m), 33' (10.0 m), 40' (12.1 m), 42' (12.8 m), 43' (13.1 m), 50' (15.2 m), 52' (15.8 m), 55' (16.7 m), 62' (18.8 m), 72' (21.9 m), 82' (24.9 m) Leg Heights: Wall mount or 10' (3 m) Truss Depth: 12" (.3 m), 21" (.53 m), 36" (.91 m) 5

6 KWIKBUILD SERIES A Simple and quick installation A The architectural fabric C membrane is a durable, high-density polyethylene weave coated to resist moisture, UV exposure and fading. C B D B Heavy duty inline galvanized carbon steel frame. An assortment of accessories are D available for these buildings including: Overhead doors, entrances, windows, lighting, ventilation and much more. KWIKBUILD SERIES The KwikBuild line of arch and gable buildings are cost-effective steel framed tension fabric buildings designed for simple and quick installation by a minimal crew without requiring heavy equipment. The KwikBuild selection of buildings feature inline galvanized single tube framing, high-density polyethylene one-piece covers, flexible foundation options, swage connections, and are available in a selection of arch and gable profiles that can be deployed as temporary or permanent structures. A range of widths from 25' (7.6 m) to 40' (12.1 m) are available to meet a variety of needs. Arch Building Widths: 30' (9.1 m), 40' (12.1 m) Gable Building Widths: 25' (7.6 m), 30' (9.1 m) 6

7 Steel Siding Truss TM Sidewall Girt HDPE Roof Endwall Frame Purlin Steel Roll Up Door Guard-All steel framed fabric structures can be outfitted with Guard-Wall enclosure systems. These can consist of Lumber Exterior cladding, Steel Panel cladding or in the case of highly corrosive environments, FRP Panel cladding. Custom engineered to A meet all building specifications at the location. A TM GUARD-WALL CUSTOM BUILDINGS B Get the optimum building B custom built to meet your design specifications. 7

8 8 Relocatable Entertainment Building

9 Crane Lifted Fabric Building 9

10 10

11 11

12 CUSTOM MANUFACTURING Manufacturing Capabilites Welding Cutting Rolling Fabrication Assembly 12

13 Guard-All Building Solutions offers custom manufacturing services to the architectural, engineering and construction industries. We have the tools, experience and capacity to fabricate complex steel and engineered fabric projects. Our 110,00 square foot facility in Dallas, Texas is outfitted with a full compliment of manufacturing equipment allowing us to create an assortment of custom metal and fabric structures. Engineering Capabilites 15 Resident Professional Engineers licensed in several States Multiple independent consultants available for immediate review assistance Over 150 years combined experience Engineering experience covering a range of disciplines from small commercial to large industrial, highly specialized with tension membrane structures Extensive background in research and development, scale modeling and laboratory analysis 13

14 14

15 THE NEXT GENERATION FABRIC BUILDING Guard-All Building Solutions manufactures an innovative selection of Next Generation Fabric Buildings. Our buildings have been installed across the United States and Canada for use by a range of industries from mining, oil & gas to public works, aviation and athletic facilities. Guard-All Building Solutions is at the forefront in molding new design concepts into the next generation fabric building, a structure built to a higher standard than conventional tension fabric buildings. The fundamental advantage that our next generation fabric building presents is an engineered superstructure designed to support all structural loads without contribution from the tensioned fabric membrane. Ensuring our designs are fabricated to specification, an equal measure has been invested into vertically integrated, technologically advanced facilities, manufacturing and distribution. The Guard-All manufacturing facilities are located in Dallas, Texas, a strategic centralized location to serve North America with easy access to international shipping. Our manufacturing process features an adept blend of advanced automation and skilled craftsmanship. Utilizing the latest computer-controlled, automated manufacturing equipment provides us with precise, consistent and efficient competitive advantages. Complementing the technology are highly proficient craftsmen with years of experience in fabricating tension fabric buildings. We have assembled a distinguished team with the combined talent, experience and ingenuity to produce best-in-class structures; together with an outstanding network of dealers we offer building solutions with leadership and integrity. Dot Haymann Dot Haymann Chairman & CEO Guard-All Building Solutions 15

16 Guard-All Building Solutions 1011 Regal Row Dallas, Texas Guard-All Building Solutions Canada Ltd # Faithfull Avenue Saskatoon, Saskatchewan S7K 6M TENSION MEMBRANE STRUCTURES