PRICE LIST Valid from June 1, 2018

Transcription

1 PRICE LIST Valid from June 1, 1 All s e works! All previous Easy-Cut-Price Lists will epire by this date.

2 INFORMATION How to order by telephone: 4 (0) 51 41/ per vertrieb@cedima.com by telefa: 4 (0) 51 41/ Our office hours are Monday to Thursday 7:30 a.m.to 5:00 p.m. and Friday 7:30 a.m.to 3:00 p.m. Pictograms angle grinders petrol-driven saws table saws block saws joint cutters dry cutting wet cutting! It is principally possible to use dry cutting tools in wet cutting mode; this will increase the life of your CEDIMA diamond tool. But please always observe the safety instructions of your machine manufacturer. Color guidance system The color indicates the particular application area of the tool. hard and very hard, non-abrasive materials general building materials, for the universal operation abrasive materials tiles, glazed tiles Safety and operation instructions for diamond tools Check the diamond tool before every use for damage. Never use diamond tools that are deformed, damaged or cracked, that show abnormalities or that might be damaged by any act of violence. Do not use diamond tools that are unbalanced (strong machine vibrations). The rpm of the machine must not eceed the maimum permitted rpm of the diamond saw blade. Bore hole and diameter of the diamond saw blades and grinding tools must fit the machine. Always wear your personal safety equipment while working with diamond tools. Observe the machine manufacturer s safety instructions. Do not bend diamond saw blades and never cut curves. Diamond saw blades are not suitable for lateral grinding. In case of disregarding these instructions the user or other surrounding persons are likely to be seriously injured. Mount the diamond saw blades in the correct rotational direction indicated by the directional arrow. Never drop diamond tools hard on to the ground. Only guide the machine, do not push it into the material. The machine s weight is sufficient. Larger cutting depths should be cut in multiple passes. Diamond tools are self-sharpening. If they have become blunt due to unfavourable working conditions make some cuts in abrasive materials (e.g. lime sand-stone). This procedure is not valid for electroplated tools. 2

3 TABLE OF CONTENTS BETON BASIC for concrete slabs, general building materials, roof tiles and lime sand-stone BETON PLUS for reinforced concrete, washed-out concrete, concrete slabs, bricks, dimensional stone as well as general building materials BETON TURBO for reinforced concrete, concrete slabs, artificial- and natural stone, general building materials, soft to medium hard granite GRANIT NATURSTEIN BASIC for granite, concrete, washed-out concrete, clinker, bricks, roof tiles, artificial stone slabs, general building materials GRANIT NATURSTEIN PLUS for granite, hard natural stone, concrete, washed-out concrete and basalt BETON NATURSTEIN KOMBI for reinforced concrete, washed-out concrete, concrete slabs, artificial and natural stone, clinker, glazed tiles, ceramics and general materials, also for a clean cut of plasterboard and profile sheet plates ASPHALT BASIC for asphalt, lime sand-stone and other abrasive materials ASPHALT PLUS for asphalt, sand-stone, green concrete and other abrasive materials BETON ASPHALT KOMBI for the universal operation in soft concrete and other abrasive materials like asphalt, green concrete and floor pavement FLIESE BASIC for tiles, glazed tiles, stone ware and thin slabs of natural stone FLIESE TURBO for tiles, hard artificial and natural stone, ceramic, clincker and vitreous refractory material TS PORO PLUS table saw for lime sand-stone, highly compressed lime sand-stone, Poroton and other very abrasive materials TS BETON table saw for concrete, lime sand-stone, gross density < 2 and shaped paving stone TS GRANIT table saw for granite slabs and blocks and hard natural stone MR PLUS mortar reamer for removing mortar out of wall joints and working in other abrasive materials and concrete ST BASIC grinding disc for grinding and smoothing of concrete, clinker, artificial and natural stone and similar materials ST PLUS grinding disc for grinding and smoothing of concrete, clinker, artificial and natural stone and similar materials BNF PLUS slot cutters for cutting of cable shafts in concrete, floor finish, lime sand-stone, plaster, mortar, masonry, bricks, plaster board DS PLUS socket bits for masonry, lime sand-stone, Poroton and other abrasive materials BK BETON PLUS drill bits for the operation in concrete and reinforced concrete (to medium shares of reinforcement) CKB 162 core drilling unit for bore- up to 162 mm Cedima reserves the right of further development and modifications of the products specified in this list without prior notice. We are not obliged to make corresponding modifications of products already supplied. Also Cedima reserves the right to delete without replacement products from her delivery programme. Without written approval by Cedima GmbH it is not allowed to reproduce any part of this list by reprint, photocopy microfilm or other methods or by storage in electronic systems. Amendments and modifications are not permitted. All the s and particulars are non-binding and without engagement. The complete terms of sale and delivery apply of Cedima Diamantwerkzeug- und Maschinenbaugesellschaft mbh in 22 Celle/ Germany. 3

4 DIAMOND SAW BLADES BETON BASIC! NEW W H L -mm2, , , , , , , , , , , mm 11,00 12,00 13,00 15,00,00 5,00 5,00 6,00 6,00 3,00 5,00 Use for concrete slabs, general building materials, roof tiles and lime sand-stone. With turbo. BETON PLUS Long life time by 12 mm height! BETON TURBO With turbo. 4 -mm mm W H L -mm2, , , , , , , , , , , , , , , , mm 21,00,00 2,00 3,00 44,00 77,00 77,00,00,00 12,00 12,00 15,00 22,00 2,00 3,00 62,00 Use for reinforced concrete, washed-out concrete, concrete slabs, bricks, dimensional stone as well as general building materials as general building materials. -mm W H L -mm2, , , , , , , , , , , , , , , mm 26,00 30,00 35,00 44,00 57,00 4,00 4,00 12,00 12,00 143,00 143,00 17,00 236,00 3,00 3,00 Use for reinforced concrete, concrete slabs, artificial- and natural stone, general building materials, soft to medium hard granite. Special shape, enables etremely fast cutting. All s e works Celle

5 DIAMOND SAW BLADES GRANIT NATURSTEIN BASIC GRANIT NATURSTEIN PLUS BETON NATURSTEIN KOMBI All s e works Celle -mm cutting rim W H -mm2,2 10 2, 10 3,2 10 3,2 10 3,2 10 3,2 10 -mm 2,00 65,00,00,00 12,00 12,00 Use for granite, concrete, washed-out concrete, clinker, bricks, roof tiles, artificial stone slabs, general building materials. With continuous cutting rim! -mm W H L -mm2, , , , , , , , , , , , mm 3,00 43,00 54,00 6,00,00 15,00 15,00 1,00 1,00 23,00 23,00 3,00 Use for granite, hard natural stone, concrete, washed-out concrete and basalt. With turbo. -mm cutting rim W H -mm1,2 10 1,2 10 1,4 10 1,6 10 1, 10 1, 10 1, 10 1, 10 2,0 10 2,0 10 2,2 10 2,2 10 -mm / / / 2,00 30,00 47,00 57,00 6,00 73,00 73,00 5,00 10,00 10,00 1,00 1,00 Use for reinforced concrete, washed-out concrete, concrete slabs, artificial and natural stone, clinker, glazed tiles, ceramics and general materials, also for a clean cut of plasterboard and profile sheet plates. With continuous cutting rim! 5

6 DIAMOND SAW BLADES ASPHALT BASIC -mm W H L -mm2, , , , , , , , , , , , , mm 35,00 65,00,00,00 133,00 133,00 173,00 173,00 22,00 24,00 36,00 615,00 60,00 Use for asphalt, lime sand-stone and other abrasive materials. With protective for a long life time! ASPHALT PLUS -mm W H L -mm2, , , , , , , , , , , , , , mm 50,00 0,00 12,00 12,00 14,00 14,00,00 1,00 1,00 23,00 315,00 425,00 56,00 7,00 Use for asphalt, sand-stone, green concrete and other abrasive materials. BETON ASPHALT KOMBI Long life time by 12 mm height! 6 -mm W H L -mm2, , , , , , , , , , , , , , , , mm 26,00 2,00 3,00 41,00 4,00,00,00 104,00 104,00 14,00 14,00 1,00 21,00 31,00 51,00 77,00 Use for the universal operation in soft concrete and other abrasive materials like asphalt, green concrete and floor pavement. All s e works Celle

7 DIAMOND SAW BLADES FLIESE BASIC -mm cutting rim W H -mm1,5 7 1,5 7 1,6 7 1,6 7 1,6 7 1,7 7 1, 7 -mm- / / / 14,00 16,00 1,00 21,00 23,00 25,00 35,00 Use for tiles, glazed tiles, stone ware and thin slabs of natural stone. Continuous cutting rim for ecellent quality of cutting edges! FLIESE TURBO All s e works Celle -mm cutting rim W H -mm1,2 10 1,2 10 1,4 10 1,4 10 1,6 10 1, 10 1, 10 1, 10 1, 10 2,0 10 2,0 10 2,2 10 2,2 10 -mm / / / 2,00 30,00 47,00 47,00 57,00 6,00 73,00 73,00 5,00 10,00 10,00 1,00 1,00 Use for tiles, hard artificial and natural stone, ceramic, clincker and vitreous refractory material. 7

8 DIAMOND SAW BLADES TS PORO PLUS TABLE SAW -mm- W H L -mm- -mm , / 23, , , , , , ,00 Use for lime sand-stone, highly compressed lime sand-stone, Poroton and other very abrasive materials. TS BETON TABLE SAW -mm- W H L -mm- -mm , / 2, , , , ,00 Use for concrete, lime sand-stone, gross density < 2 and shaped paving stone. TS GRANIT TABLE SAW -mm- W H L -mm- -mm , / 3, , , , ,00 Use for granite slabs and blocks and hard natural stone. All s e works Celle

9 DIAMOND TOOLS FOR SPECIAL APPLICATIONS MR PLUS MORTAR REAMER -mm W H L -mm- -mm , , , , , ,00 Use for removing mortar out of wall joints and working in other abrasive materials and concrete. ST BASIC GRINDING DISC -mm W H L -mm- -mm ,0 / 35 * 1 35, ,0 / 35 * 1 40, ,0 / 35 * 55,00 *) inner / outer Use for grinding and smoothing of concrete, clinker, artificial and natural stone and similar materials. ST PLUS GRINDING DISC -mm W H L -mm- -mm , , , , , ,00 Use for grinding and smoothing of concrete, clinker, artificial and natural stone and similar materials. BNF PLUS SLOT CUTTERS All s e works Celle Versatile applications! -mm W H L -mm- -mm , , , , , ,00 Use for cutting of cable shafts in concrete, floor finish, lime sand-stone, plaster, mortar, masonry, bricks, plaster board. for indoor and outdoor areas (ceilings, floors, walls) for removing mortar and plaster out of wall and tile joints suitable for power cable, data cable, coaial cable etc. frequently required widths are easily performed by parallel cuttings

10 DIAMOND DRILL BITS DS PLUS SOCKET BITS -mm W H L -mm- connection ,5 4 M16 45, ,5 6 M16 50,00 Drill bit for making openings for flush-mounted sockets or distribution boes. Use for masonry, lime sand-stone, Poroton and other abrasive materials. connection M-16 inside thread with turbo Delivery incl. 1 heagon receptacle for standard drill chuck 2 centre drill 3 taper key BK BETON PLUS DRILL BITS -mm W H L -mm- connection , /4 UNC 4, , /4 UNC 51, , /4 UNC 6, , /4 UNC 2, , /4 UNC 100, , /4 UNC 101, , /4 UNC 12, ,5 1 1/4 UNC 152, ,5 1 1/4 UNC 165, ,5 1 1/4 UNC 176, , /4 UNC 16, , /4 UNC 214, , /4 UNC 236, , /4 UNC 21, , /4 UNC 357, , /4 UNC 37, , /4 UNC 44,00 Universal drill bit for the operation in concrete and reinforced concrete (up to medium shares of reinforcement) usuable length 450 mm connection 1¼ UNC-bushing high feed and long life time conditionally applicable in dry cutting turbo 10 All s e works Celle

11 DIAMOND CORE DRILLING UNIT CKB 162 CORE DRILLING UNIT for bore- up to 162 mm ,00 Available from August 1! Core drilling unit consisting of drill motor with ball valve and GARDENA plug nipple, with PRCD circuit breaker integrated in the cable and mounted on the drill column. Available accessories on request. Delivery without diamond drill bit! machine switch with overload cut-off-protection against motor overload cut-off carbon brushes - protection of the motor 1-speed oil bath gearbo - optimum lubrication mechanical safety coupling integrated water supply stainless steel combined spindle for mounting G½ and 1¼ drill bits drive and column fied unit easy to handle, sturdy and low-d space-saving, compact drilling unit - low weight Made in Germany Technical data and equipment features Ma. output power Idle speed Rated rpm Voltage/current/ frequency Protection class Ma. drill bit- tool mounting Column length Lift Weight 2,5 kw 675 pm 450 pm 230 V/11,5 A/50-60 Hz IP 162 mm G ½ inside and 1 ¼ UNC outside 70 mm 5 50 mm appro 15,5 kg All s e works Celle 11

12 Material Tools BETON BASIC BETON PLUS APPLICATION CHART FOR EASY CUT DIAMOND TOOLS BETON TURBO GRANIT NATURSTEIN BASIC GRANIT NATURSTEIN PLUS BETON NATURSTEIN KOMBI ASPHALT BASIC ASPHALT PLUS tiles, glazed tiles, slabs of natural stone vitreous refractory material hard clinkers, paving stones glazed stone ware tubes heavy ceramics natural stone (granite, gneiss etc.) artificial stone, polymer concrete reinforced concrete cured concrete washed-out concrete curb stones paving concrete concrete full brick high density lime sand-stone lime stone (marble, terrazzo etc.) roof tiles slate fibre-glas plastics plaster board clay bricks aerated concrete refractory material, porous lime sand-stone, gross density < 2 poroton masonry sand-stone floor finish mortar asphalt green concrete profile sheets very applicable well applicable conditionally applicable your partner BETON ASHPALT KOMBI FLIESE BASIC FLEISE TURBO TS PORO PLUS TS BETON TS GRANIT MR PLUS ST BASIC ST PLUS BNF PLUS DS PLUS BK BETON PLUS Cedima Diamantwerkzeug- und Maschinenbaugesellschaft mbh Lärchenweg 3 22 Celle /Germany Tel. 4 (0)5141/ Fa4 (0)5141/ info@cedima.com