voestalpine Krems GmbH Wandanschlüsse an Betonwände bzw. Mauerwerk Wall connections to concrete walls/masonry Masonry, concrete or concrete blocks

Transcription

1 Wandanschlüsse an Betonwände bzw. Mauerwerk Wall connections to concrete walls/masonry or concrete blocks or concrete blocks steel spacers steel spacers 100mm concrete masonry metal frame anchor ø10 e.g. HT Toge-anchor frame anchor ø10 e.g. HRD-UGT universal screw ø7,5; e.g. HUS or similar plaster metal frame anchor ø10 e.g. HT Toge-anchor frame anchor ø10 e.g. HRD-UGT universal screw ø7,5; e.g. HUS or similar or concrete blocks with weld-on anchor or concrete bolcks with weld-on fixing strap frame anchor e.g.: Hilti HT 10/72 or similar plaster weld-shut steel spacers plug welding weld-on anchor according to DIN weld-shut min. approved anchor distance 6.1.1

2 Wandanschlüsse an Betonwände bzw. Mauerwerk Wall connections to concrete walls/masonry or concrete blocks with anchor profile or concrete blocks with hat profile plaster plaster steel spacer optional hardwood steel spacers steel anchor 100x2, welded onto tube counter sunk screw M6x70 with pop rivet nut M6x14,5 drill diameter 9,1mm Drilling must be through tube hat profile 50/25/15x3 counter sunk screw M8x70 or optional welded onto tube or concrete blocks with dummy frame or concrete blocks with wall distance 25mm counter sunk screw cover angle 1 mm at least 50 kg/m³ fire-resistant metal frame anchor ø10, e.g. HT Toge-anchor frame anchor ø10, e.g. HRD-UGT universal screws Ø 7,5; e.g. HUS or similar 6.1.2

3 Wandanschlüsse an Betonwände bzw. Mauerwerk Wall connections to concrete walls/masonry Frame with screw anchor plastered Put steel- /hardwood spacers in the area of screwing Frame with screw anchor plastered Frame with weld-on fixing straps frame anchor e.g.: Hilti HT 10/72 e 850mm frame anchor e.g.: Hilti HT 10/72 e 850mm slot 8x18 slot 8x18 anchor Ø6 e.g.: Hilti HUS-H e 850 mm anchor Ø6 e.g.: Hilti HUS-H e 850 mm weld on hinge e.g.: Charmag 3D E 6.1.3

4 Wandanschlüsse schräg an Betonwände bzw. Mauerwerk Angular wall connections to concrete walls/masonry Angular connection, screwed design plaster cover sheet 85x2 - bend up adapt length sheet metal screw B 3,8 x 60 metal frame anchor ø10, e.g. HT Toge-anchor frame anchor ø10, e.g. HRD-UGT or similar anchor sheet of steel (120x4) adapt to design counter sunk screw M8x60 or optional anchor sheet welded onto profile Angular connection with weld-on fixing strap plaster cover sheet 85x2 - bend up adapt length optional sheet metal screw B 3,8 x 60 metal frame anchor ø10, e.g. HT Toge-anchor frame anchor ø10, e.g. HRD-UGT or similar plug welding anchor sheet of steel (120x4) adapt to design 6.1.4

5 Wandanschlüsse an Porenbetonwände - Wall connections to aerated concrete walls massive norm-construction (low density) direct fixing Fixing: by anchor plates ~ flat steel ~ ~ ~ steel spacer ~ ~ drill together at assembling and tap flat steel anchor distance > 75 mm variant screwed countersunk screw M8 x 70 variant anchor rod of building material classification A, DIN 4102 variant welded countersunk screw M8 x 70 aerated concrete anchor Würth type W-PAD M8 or similar anchor rod M8x150 with threaded sleeve M8x30, glued with Hilti Hit... of building material classification A, DIN

6 Wandanschlüsse an Porenbetonwände mit Auswechslungsrahmen Wall connections to aerated concrete walls with frame Assembly in aerated concrete walls connection to aerated concrete slabs steel tube 50x50x4 or cover angle see frame see overlap optional 1-leaf door or 2-leaf door or partition wall mortar or countersunk screw M8x80 plates alternate overlapped aerated concrete mortar or steel tube 90x50x4 (100x50x4) or cover angle see connection to aerated concrete slabs countersunk screw M8x80 at higher wall thicknesses/ wall heights optional frame turned see frame see mortar aerated concrete plaster steel tube 90x50x4 (100x50x4) connection to aerated concrete masonry countersunk screw M8x

7 Wandanschlüsse an Porenbetonwände, Auswechslungsrahmen Wall connections to aerated concrete walls, frame Design with tube telescopic connection steel angle 50x35x4 screwed or plug welding screwed or welded screwed or plug welding telescopic connection with tube 40x40x4-90x40x4 or 2 angles Welded or optional: screwed to head plate or telescopic connection steel tube steel tube 50x50x4-100x50x4 Section B - B angle 35x35x4-70x35x4 Assembly see flat steel...x42x4 Telescopic connection with tube or angle, as plotted 6.2.3

8 Wandanschlüsse an leichte Trennwände - Wall connections to stud walls gypsum plasterboard steel spacers countersunk screw M8x80 steel plate 50x5x100 with countersunk screws M5x16 gypsum plasterboard steel spacers countersunk screw M8x80 with cover sheet 1-2 mm Promatect or Fermacell - plates stud wall (gypsum plasterboards) optional masonry or concrete 6.3.1

9 Wandanschlüsse an leichte Trennwände mit Auswechslungsrahmen Wall connections to stud walls with frame Assembly in stud walls optional 1-leaf door or 2-leaf door or partition wall "U" profile 50/40x0,6 metal framing components: telescopic connection FR 45x45x2 with FR 40x40 over total length frame (see 6.3.3) countersunk screw M8x80 steel spacers (hardwood) gypsum plasterboard countersunk screw M8x80 steel spacers (hardwood) "U" profile 50/40x0,6 gypsum plasterboard *... 3 (to static requirements) FR 50x50 at wall height 5000mm 50x70 at wall height 5500mm 50x100 at wall height 6000mm countersunk screw M8x

10 Wandanschlüsse an leichte Trennwände, Auswechslungsrahmen Wall connections to stud walls, frame Design with tube telescopic connection steel angle 50x35x4 screwed or plug welding head plate screwed or welded screwed or plug welding telescopic connection with tube/2 angles Welded or optional: screwed to head plate or telescopic connection flat steel Section B - B steel tube steel tube angle 35x35x4-70x35x4 Assembly see Telescopic connection with tube or angle, as plotted 6.3.3

11 Wandanschlüssse an bekleidete Stahlstützen und/oder -träger Wall connections to covered steel posts and/or -girders Variant connection to fire-resistant plates (tube) tube or optional cover angle countersunk screw M8x110 Variant connection to fire-resistant plates (I-girder) or optional cover angle steel 50x5xB welded countersunk screw M8x120 installation optional displaced Casing of steel posts with gypsum plasterboards F or Promatect - plates DIN 4102 part 4, chapter

12 Wandanschlüsse mit Rahmenverbreiterung - Wall connections with frame expansion side panel expansion door frame expansion Promatect/Fermacell - plates Floor connections with frame expansion Apply black, fire-resistant over the whole profile length! welding, L = 30, e = 500 optional screwing metal frame anchor e.g.: Hilti HT 10/182 base profile- or side panel expansion base profile expansion Apply black, fire-resistant over the whole profile length! welding, L = 30, e = 500 optional screwing metal frame anchor e.g.: Hilti HT 10/182 metal frame anchor e.g.: Hilti HT 10/182 mounting, optional clip onesided or double-sided (see 4.5.7) or cap profile (see 4.5.4) filled with (building material classification A1) or plate (Promatect, Fermacell or similar material) optional 380 mm Cant base profile 6.5.1

13 Türrahmenverbreiterung - Door frame expansion Section A-A Section B-B A B Variant with frame expansion top Variant with frame expansion top C puddle welding, optional screwing panel E 30, E 60 optional suspended ceiling A B Apply black, fire-resistant over the whole profile length! glass glass 2-leaf doors, analogous execution Section C-C Frame expansion optional single sided approved Apply black, fire-resistant over the whole profile length! glass panel E 30, E 60 mounting, optional clip onesided or double-sided (see 4.5.7) or cap profile (see 4.5.4) welding, L = 30, e = 500 optional screwing panel E 30, E 60: glued, Fermacell 1 x 10 mm, single sided steel sheet 1-2 mm 6.5.2

14 Profilverstärkung - Profile reinforcement cover according to static requirement cover optional screwing screw M8x20 with pop rivet nut M8 respective 50 mm from the ends, e=500 mm* optional welding a= 2, L= 30, e= 500*, alternately cover cover screw M8x10 respective 50 mm from the ends, e=500 mm* plate screw M8x10 respective 50 mm from the ends, e=500 mm* spacer flat steel e.g. 45 x 45 e=500 mm* setting in profiled tube 45/45/>2* optional setting in U-profile 45/45/>3* screw M6 x 8 **... plug welding... /acc. to static requirements 6.5.3